A new question on the same item:
The attachment I've chosen to create is too large as a pdf. There are
several pictures within a flyer. I can save the created art/flyer as a jpeg
and the file size is ideal. But when I try all these same instructions, but
have a jpeg instead of a pdf file, it doesn't work. I know the subject of
this discussion specifies adding a pdf file, but the article you wrote and
refer to in this thread doesn't appear to specify that the attachments that
can be sent are limited to pdf's. Do I need to do something different for a
jpeg?
Thanks in advance.
"Doug Robbins" wrote:
It is the formletter mailmerge that must be executed to a new document.
While the macro uses Outlook, ALL of the merging is being done from Word and
Word DOES allow you to merge to a new document with the Form Letter in
exactly the same way that you merged to a new document with the directory
type mailmerge.
The article says
"Then execute the mail merge that you want to send out by email with the
attachments and with the result of execution of that mail merge on the
screen"
If the result is going to be on the screen, the only way that it can get
there is if the merge is executed to a new document.
--
Hope this helps.
Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.
Doug Robbins - Word MVP
"Mmiller" wrote in message
...
I need you to be more specific please.
The instructions in your article contain two different merges.
1.Do you mean the directory type mail merge?
If so, then I did complete the last step in Outlook's and your
article's instructions that merged the information to a new document. That
new document did create a table that had all the elements from the data
source that I planned to use in the mass email, including, but not limted
to
the email address and the attachment. This new document containing the
table
was saved and selected later, as instructed when the file open dialog
appears
after running the macro.
2. If you mean the "form letter" merge as you called it earlier, you will
have to elaborate. There are no references to a new document in the
article
(at the form letter merge state) and Outlook only allows you to merge to a
printer as the final step in the merge process. You'll have to detail how
to
do this.
3.Additional question - When creating the form letter merge, at the step
where I am to select the recipients, do I point to the original data
source,
or to the document with the table created from my directory type mail
merge?
(that used the original data source to create the table) As we proceed, I
need to clarify which one is expected to be used.
As I've mentioned earlier, I've tried it both ways, with both resulting in
attachments being produced, but both leaving out essential information in
all
but the first email produced.
Thank in advance.
"Doug Robbins" wrote:
You have not executed the merge to a new document that contains a section
for each record in the data source.
--
Hope this helps.
Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.
Doug Robbins - Word MVP
"Mmiller" wrote in message
...
For example, if the mass email was to produce 25 emails, the first
email
generated will be complete. It will have the attachment, the email
address,
the subject line and the body.
The body: manually written info such as, "dear" and then using a
placeholder
(merge fields?) for the info to be populated by the data source. (I
didn't
manually write it, the merge generates the verbiage) I saw it referred
to
as
a placeholder in some instructions online but an example of what I'm
talking
about looks like: name Then more manually entered info in the body
such
as; "The attached document contains....blah, blah....Sincerely...etc"
As I said, the first email generated would be complete - containing all
elements as it should. But the next 24 would only have the email
address
and
subject lines. Info I think is generated by the macro. But no body
elements
whatsoever.
The problem appears to have something to do with running the macro
because
I
can run a mail merge - (Ive tried both a form letter or an email merge)
and
not run the macro and all info/results are produced as they should be
in
the
initial and subsequent letters/emails.
I can't get the attachments included in the mass email without running
the
macro, but at this point I can't get multiple emails (complete) when I
do
run
the macro.
"Doug Robbins" wrote:
I don't understand what you are doing here
This first email will also have the hand
written and information along with the poplulated info from the
placeholders.
But none of the subsequent emails have anything.
What "hand written information"?
What do you mean by "placeholders"? Are they the mergefields?
This failure has nothing to do with the macro, you fix up the
mailmerge
so
that it produces the formletters as you want them.
--
Hope this helps.
Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.
Doug Robbins - Word MVP
"Mmiller" wrote in message
...
Progress!!
But not 100% right. The attachment is now in the email(s). Yey! But
the
other problem still exists. The fields/placeholder entries and the
manually
entered text I created in the body of the form letter only appear in
the
very
first email and not in any of the subsequent emails the program
publishes.
If
you can help me determine what I'm doing wrong on that point I'm
set.
And
thanks so much in advance!
BTW - I've tried using both the directory type document as my data
source
and the excel file (where the info came from to create the directory
doc).
Both scenarios produce an attachment now with the form letter - but
neither
produce the missing information past the first email.
"Doug Robbins" wrote:
Use a formletter not an email message type main document
--
Hope this helps.
Please reply to the newsgroup unless you wish to avail yourself of
my
services on a paid consulting basis.
Doug Robbins - Word MVP
"Mmiller" wrote in message
...
I guess not clearly enough for the disabled because I'm missing
where
I'm
making my mistake. Please bear with me as I try to find the
mistake
with
your
help.
The directory type mail merge document was created in a separate
document,
saved and closed. I then opened a new blank document to create
the
mail
merge
I wanted to send out. I chose mail merge/email messages -
following
the
set
up instructions that word gives and using the directory type mail
merge
file
created earlier as my data source. (I even tried using the
original
data
source; my excel spreadsheet, and then identifying the file
created
by
the
catalogue type mail merge at the point the dialog box opened up
after
running
the macro, but that came up with the same results- no body in the
email
message.) I thought this was what you meant when you said
"execute
the
mail
merge that you want to send out" in your instructions. I'm sure
the
instructions are accurate. But I am not able to identify at
exactly
what
point I am failing to understand/follow them correctly. If it is
clear
to
you, will you please specify?
By the way, I was incorrect - when I run the macro at either
point
in
the
process, the very first email will have the drive\path\filename
reference
to
the attachment - but no attachment. This first email will also
have
the
hand
written and information along with the poplulated info from the
placeholders.
But none of the subsequent emails have anything.
Thanks! :-)
"Doug Robbins" wrote:
Re-read the instructions. They say quite clearly that the merge
must
be
executed to a new document and they do not say anything amount
merging
to
electronic mail.
--
Hope this helps.
Please reply to the newsgroup unless you wish to avail yourself
of
my
services on a paid consulting basis.
Doug Robbins - Word MVP
"Mmiller" wrote in message
...
Thanks Doug.
Did that- but had the wrong one checked. Got that fixed and
yes,
the
macro
performs without any error message. But the whole process is
still
not
working right.
If I hit the macro key before the very last step of merging
the
document
with electronic mail, then the resulting merge has none of the
email
message
I created in the body of the document. The body of the email
is
completely
blank. In addition to the field for the attachment, I also
chose
a
name
field
when creating/executing this mail merge. None of the manually
created
message
or the field information showed up. If I wait and hit the
macro
key
after
the
last step of merging to electronic mail, then the office
program/merge
creates the emails as it would without the macro. The email
has
all
the
|