Home |
Search |
Today's Posts |
#1
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
how do you get rid of a blank last page of a doc? I've tried to bs and
delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! |
#2
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm
-- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! |
#3
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
Hi Suzanne,
I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . |
#4
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
Do you have a Section Break after the table? What is the orientation of the
unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . |
#5
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
yes, but I didn't do it myself. its automatically there because the 1st 5
pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . |
#6
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
You need a section break before the table but not after.
-- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . |
#7
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
There was a section break before the table.
Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . |
#8
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
What is the orientation of the unwanted last page?
Also in the Table properties dialog, make sure that the Text wrapping is set to None. If you click on the Show/Hide button (ΒΆ), what do you see after the table? -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message news ![]() There was a section break before the table. Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . |
#9
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
If one point didn't do it, did Hidden not work? Can you reduce the height of
the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news ![]() There was a section break before the table. Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . |
#10
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
The orientation of the unwanted last page = portrait.
I can find "Text Wrap" in the Table properties dialog ??? I did click on the Show/Hide button (ΒΆ), there is nothing shown after the table (i.e. page 6). Yet the unwanted last page, the 1st sign (1st row) is with this ΒΆ thanks karen "Doug Robbins - Word MVP" wrote: What is the orientation of the unwanted last page? Also in the Table properties dialog, make sure that the Text wrapping is set to None. If you click on the Show/Hide button (ΒΆ), what do you see after the table? -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message news ![]() There was a section break before the table. Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . |
#11
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
sorry, I have found the Table properties, it was around.
I changed the Text wrapping to none. After changing, the section break went down underneath the table. Before changing: The section break was showed on the top of the table (landscape). The unwanted blank page remains - portrait and the beginning of the 1st row with a ΒΆ sign. "Doug Robbins - Word MVP" wrote: What is the orientation of the unwanted last page? Also in the Table properties dialog, make sure that the Text wrapping is set to None. If you click on the Show/Hide button (ΒΆ), what do you see after the table? -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message news ![]() There was a section break before the table. Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . |
#12
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
If the orientation of the unwanted last page is portrait, then there *must*
be a section break between it and the landscape page. Switching to Normal/Draft view should make it possible for you to see and delete this break, but before you do that, change the orientation of the last section to landscape; otherwise the table section will become portrait and will have to be changed. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news ![]() The orientation of the unwanted last page = portrait. I can find "Text Wrap" in the Table properties dialog ??? I did click on the Show/Hide button (ΒΆ), there is nothing shown after the table (i.e. page 6). Yet the unwanted last page, the 1st sign (1st row) is with this ΒΆ thanks karen "Doug Robbins - Word MVP" wrote: What is the orientation of the unwanted last page? Also in the Table properties dialog, make sure that the Text wrapping is set to None. If you click on the Show/Hide button (ΒΆ), what do you see after the table? -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message news ![]() There was a section break before the table. Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . |
#13
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
1 pt. didn't work and I did reduce the table for more than 3 rows.
What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news ![]() There was a section break before the table. Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . |
#14
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
Format | Font | Hidden, but it won't work, either, because you clearly have
a section break; see my other post. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... 1 pt. didn't work and I did reduce the table for more than 3 rows. What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news ![]() There was a section break before the table. Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . |
#15
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
"Hidden" is a text attribute available in the Font dialog box.
Alternatively, you can apply it by pressing Ctrl+Shift+H. -- Stefan Blom Microsoft Word MVP "KarenY" wrote in message ... 1 pt. didn't work and I did reduce the table for more than 3 rows. What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news ![]() There was a section break before the table. Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . |
#16
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
Note that you can format the section break as hidden (or 1 pt). Of course,
if it isn't needed (I haven't been reading the whole thread), it would be easier to just delete it. -- Stefan Blom Microsoft Word MVP "Suzanne S. Barnhill" wrote in message ... Format | Font | Hidden, but it won't work, either, because you clearly have a section break; see my other post. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... 1 pt. didn't work and I did reduce the table for more than 3 rows. What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news ![]() Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . |
#17
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
Since the landscape section is the last content page in the document, a
section break following it is NOT required. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "Stefan Blom" wrote in message ... Note that you can format the section break as hidden (or 1 pt). Of course, if it isn't needed (I haven't been reading the whole thread), it would be easier to just delete it. -- Stefan Blom Microsoft Word MVP "Suzanne S. Barnhill" wrote in message ... Format | Font | Hidden, but it won't work, either, because you clearly have a section break; see my other post. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... 1 pt. didn't work and I did reduce the table for more than 3 rows. What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news ![]() Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . |
#18
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
True. (As I wrote, I didn't read through the entire thread.)
-- Stefan Blom Microsoft Word MVP "Suzanne S. Barnhill" wrote in message ... Since the landscape section is the last content page in the document, a section break following it is NOT required. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "Stefan Blom" wrote in message ... Note that you can format the section break as hidden (or 1 pt). Of course, if it isn't needed (I haven't been reading the whole thread), it would be easier to just delete it. -- Stefan Blom Microsoft Word MVP "Suzanne S. Barnhill" wrote in message ... Format | Font | Hidden, but it won't work, either, because you clearly have a section break; see my other post. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... 1 pt. didn't work and I did reduce the table for more than 3 rows. What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news ![]() Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . |
#19
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
That's what I would like to delete. It doesn't let me to.
Also if I delete the section break, the landscape format is gone for page, returns to the same orientation as "portrait" as the other pages. (1st 5 pages = portrait, last page is for the table and landscape). "Stefan Blom" wrote: Note that you can format the section break as hidden (or 1 pt). Of course, if it isn't needed (I haven't been reading the whole thread), it would be easier to just delete it. -- Stefan Blom Microsoft Word MVP "Suzanne S. Barnhill" wrote in message ... Format | Font | Hidden, but it won't work, either, because you clearly have a section break; see my other post. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... 1 pt. didn't work and I did reduce the table for more than 3 rows. What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news ![]() Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . . |
#20
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
Note that a section break stores the formatting of the previous section.
When you delete it, Word will use the formatting of the following break (or the section formatting stored in the final paragraph mark if you are deleting the final section break of a document). After you've deleted the break, change the orientation back to Landscape using the Page Setup dialog box. See also the "If you really want to delete the temporary section break ..." section of the article at http://word.mvps.org/faqs/formatting...thSections.htm. -- Stefan Blom Microsoft Word MVP "KarenY" wrote in message ... That's what I would like to delete. It doesn't let me to. Also if I delete the section break, the landscape format is gone for page, returns to the same orientation as "portrait" as the other pages. (1st 5 pages = portrait, last page is for the table and landscape). "Stefan Blom" wrote: Note that you can format the section break as hidden (or 1 pt). Of course, if it isn't needed (I haven't been reading the whole thread), it would be easier to just delete it. -- Stefan Blom Microsoft Word MVP "Suzanne S. Barnhill" wrote in message ... Format | Font | Hidden, but it won't work, either, because you clearly have a section break; see my other post. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... 1 pt. didn't work and I did reduce the table for more than 3 rows. What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news ![]() Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . . |
#21
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
I haven't done the section break after the table (page 6), the section break
is before the table, i.e. prior to the changing from portriat to landscape. When I turn on the paragraph sign, I don't see a section break after the table either. I have tried point 1, hidden, change the margin at the bottom of the table page, make the table smaller with a couple of rows less, etc. etc. What did I do wrong ? OR can you please tell me step by step to create a new document, I can just copy and paste the text from the existing document to a new document as long as I have the 1st 5 pages in portrait and the last page to be the table page in landscape. appreciate it if you could help me out on this, otherwise, I will type "THIS IS A BLANK PAGE" in my last page for the solution although I don't really want to.... looks silly, because this is an instruction document. "Suzanne S. Barnhill" wrote: Since the landscape section is the last content page in the document, a section break following it is NOT required. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "Stefan Blom" wrote in message ... Note that you can format the section break as hidden (or 1 pt). Of course, if it isn't needed (I haven't been reading the whole thread), it would be easier to just delete it. -- Stefan Blom Microsoft Word MVP "Suzanne S. Barnhill" wrote in message ... Format | Font | Hidden, but it won't work, either, because you clearly have a section break; see my other post. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... 1 pt. didn't work and I did reduce the table for more than 3 rows. What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news ![]() Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . . |
#22
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
Okay, let's make one thing clear: You CANNOT have a portrait page after your
landscape table without having a section break (Next Page) between them. And, as I said in a previous post, if you want to delete the section break without changing the landscape orientation of the table page, you have to change the orientation of that last page/section to landscape BEFORE deleting the section break. If you have difficulty seeing the section break even in Normal/Draft view, then you can search for ^b or use Browse by Section to find it. You *will* be able to delete it, and that is the only way you can remove the last page. The link Stefan gave you to http://word.mvps.org/faqs/formatting...thSections.htm should be helpful as well. In this case, since your table doesn't fill the page, you could convert the Next Page break to a Continuous break. You'll still need to change the orientation of that last page first; then, with the insertion point on the last page, go to the Layout tab of Page Setup and change the section start type. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... I haven't done the section break after the table (page 6), the section break is before the table, i.e. prior to the changing from portriat to landscape. When I turn on the paragraph sign, I don't see a section break after the table either. I have tried point 1, hidden, change the margin at the bottom of the table page, make the table smaller with a couple of rows less, etc. etc. What did I do wrong ? OR can you please tell me step by step to create a new document, I can just copy and paste the text from the existing document to a new document as long as I have the 1st 5 pages in portrait and the last page to be the table page in landscape. appreciate it if you could help me out on this, otherwise, I will type "THIS IS A BLANK PAGE" in my last page for the solution although I don't really want to.... looks silly, because this is an instruction document. "Suzanne S. Barnhill" wrote: Since the landscape section is the last content page in the document, a section break following it is NOT required. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "Stefan Blom" wrote in message ... Note that you can format the section break as hidden (or 1 pt). Of course, if it isn't needed (I haven't been reading the whole thread), it would be easier to just delete it. -- Stefan Blom Microsoft Word MVP "Suzanne S. Barnhill" wrote in message ... Format | Font | Hidden, but it won't work, either, because you clearly have a section break; see my other post. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... 1 pt. didn't work and I did reduce the table for more than 3 rows. What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news ![]() Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . . |
#23
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
It works !
I really appreciate all of you having a lot of patience for me !!!! I am really happy. Again I am sorry for just a simple thing to cause all the troubles to you all. Learned a lot again ! thanks again, karen "Suzanne S. Barnhill" wrote: Okay, let's make one thing clear: You CANNOT have a portrait page after your landscape table without having a section break (Next Page) between them. And, as I said in a previous post, if you want to delete the section break without changing the landscape orientation of the table page, you have to change the orientation of that last page/section to landscape BEFORE deleting the section break. If you have difficulty seeing the section break even in Normal/Draft view, then you can search for ^b or use Browse by Section to find it. You *will* be able to delete it, and that is the only way you can remove the last page. The link Stefan gave you to http://word.mvps.org/faqs/formatting...thSections.htm should be helpful as well. In this case, since your table doesn't fill the page, you could convert the Next Page break to a Continuous break. You'll still need to change the orientation of that last page first; then, with the insertion point on the last page, go to the Layout tab of Page Setup and change the section start type. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... I haven't done the section break after the table (page 6), the section break is before the table, i.e. prior to the changing from portriat to landscape. When I turn on the paragraph sign, I don't see a section break after the table either. I have tried point 1, hidden, change the margin at the bottom of the table page, make the table smaller with a couple of rows less, etc. etc. What did I do wrong ? OR can you please tell me step by step to create a new document, I can just copy and paste the text from the existing document to a new document as long as I have the 1st 5 pages in portrait and the last page to be the table page in landscape. appreciate it if you could help me out on this, otherwise, I will type "THIS IS A BLANK PAGE" in my last page for the solution although I don't really want to.... looks silly, because this is an instruction document. "Suzanne S. Barnhill" wrote: Since the landscape section is the last content page in the document, a section break following it is NOT required. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "Stefan Blom" wrote in message ... Note that you can format the section break as hidden (or 1 pt). Of course, if it isn't needed (I haven't been reading the whole thread), it would be easier to just delete it. -- Stefan Blom Microsoft Word MVP "Suzanne S. Barnhill" wrote in message ... Format | Font | Hidden, but it won't work, either, because you clearly have a section break; see my other post. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... 1 pt. didn't work and I did reduce the table for more than 3 rows. What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news ![]() Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . . . |
#24
![]()
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
![]()
I'm glad you got it sorted! :-)
-- Stefan Blom Microsoft Word MVP "KarenY" wrote in message ... It works ! I really appreciate all of you having a lot of patience for me !!!! I am really happy. Again I am sorry for just a simple thing to cause all the troubles to you all. Learned a lot again ! thanks again, karen "Suzanne S. Barnhill" wrote: Okay, let's make one thing clear: You CANNOT have a portrait page after your landscape table without having a section break (Next Page) between them. And, as I said in a previous post, if you want to delete the section break without changing the landscape orientation of the table page, you have to change the orientation of that last page/section to landscape BEFORE deleting the section break. If you have difficulty seeing the section break even in Normal/Draft view, then you can search for ^b or use Browse by Section to find it. You *will* be able to delete it, and that is the only way you can remove the last page. The link Stefan gave you to http://word.mvps.org/faqs/formatting...thSections.htm should be helpful as well. In this case, since your table doesn't fill the page, you could convert the Next Page break to a Continuous break. You'll still need to change the orientation of that last page first; then, with the insertion point on the last page, go to the Layout tab of Page Setup and change the section start type. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... I haven't done the section break after the table (page 6), the section break is before the table, i.e. prior to the changing from portriat to landscape. When I turn on the paragraph sign, I don't see a section break after the table either. I have tried point 1, hidden, change the margin at the bottom of the table page, make the table smaller with a couple of rows less, etc. etc. What did I do wrong ? OR can you please tell me step by step to create a new document, I can just copy and paste the text from the existing document to a new document as long as I have the 1st 5 pages in portrait and the last page to be the table page in landscape. appreciate it if you could help me out on this, otherwise, I will type "THIS IS A BLANK PAGE" in my last page for the solution although I don't really want to.... looks silly, because this is an instruction document. "Suzanne S. Barnhill" wrote: Since the landscape section is the last content page in the document, a section break following it is NOT required. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "Stefan Blom" wrote in message ... Note that you can format the section break as hidden (or 1 pt). Of course, if it isn't needed (I haven't been reading the whole thread), it would be easier to just delete it. -- Stefan Blom Microsoft Word MVP "Suzanne S. Barnhill" wrote in message ... Format | Font | Hidden, but it won't work, either, because you clearly have a section break; see my other post. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... 1 pt. didn't work and I did reduce the table for more than 3 rows. What "Hidden" mean by you please ? "Suzanne S. Barnhill" wrote: If one point didn't do it, did Hidden not work? Can you reduce the height of the table slightly? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message news ![]() Let me put all the pieces together : first 5 pages = portrait section break page 6 = landscape, it's the table but there's still some line spacing on the page actually page 6 is the last page of the document but then page 7 = blank page which was created automatically and that I couldn't remove it As in your (Suzanne) page, there would be a paragraph after the table, there's no paragraph on page 6, it's on page 7 (portrait), so I've changed into 1 point, it's a blank page (pg.7). I can't see a para. after the table on the same page (pg. 6), I pressed the "backspace" from page 7, then the cursor went back on the top of the table in pg.6 and I don't see a section break after the table. I am completely lost now.... Please help. thanks Karen "Suzanne S. Barnhill" wrote: You need a section break before the table but not after. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "KarenY" wrote in message ... yes, but I didn't do it myself. its automatically there because the 1st 5 pages are portrait, then I have to add a section break for the 6th page for the table. Can I get rid of the section break ? "Doug Robbins - Word MVP" wrote: Do you have a Section Break after the table? What is the orientation of the unwanted blank page? If it is portrait, then for sure you do have a Section Break after the table. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "KarenY" wrote in message ... Hi Suzanne, I have the same problem as this threat and did try to resolve as you wrote in the link listed below but no success after having tried for almost an hour ! I have the table in my last page and I did change the font of the last para. into 1 point, as a matter of fact, after the table, I still have a couple of rows (space) on the page too. Here's my file is: 6 pages, first 5 pages are portrait, 6th page is landscape with the table. There are header and footer for the file. Would that be something to do with the section ? Please help ? I know it may be simple but I just couldn't get there.... thanks Karen "Suzanne S. Barnhill" wrote: See http://sbarnhill.mvps.org/WordFAQs/BlankPage.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "frus" wrote in message ... how do you get rid of a blank last page of a doc? I've tried to bs and delete the reviewing characters but can't. I'm about to jump off a cliff for spending so much time on something that should be simple! . . . . . |
Reply |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
how to remove blank last page | Microsoft Word Help | |||
How do I remove a blank template page? | Microsoft Word Help | |||
trying to remove last page from doc. blank except header | New Users | |||
blank page opens with text. How to remove text so open blank | Microsoft Word Help | |||
remove a blank page | Page Layout |