Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Table set to autofit in footer keeps vibrating...
Because some pages in my doc are landscape and others are portrait, I need a
footer that more or less automatically resizes: tab settings tend to create footer that are either too narrow for one seciont or to wide for another. I created a one row, 5-cell table defined as autofit to window so that it would span the page margin-to-margin. This seemed marvelous at first, but it started jumping back and forth to different sizes at about 3 cycles per second. So, then I tried breaking the footer links between portrait and landscape sections, adding about 5 footers to maintain in a 90 page doc. However, this did not resolve the auto-resize issue at all, any given footer continues to "resize," giving the appearance of "vibrating." How to fix this so doc displays in a stable fashion. |
#2
|
|||
|
|||
Forget the autosize table. Having broken the footer links between sections,
simply format each footer, using tabs, for the page width of that section. "Kind writer/user/programmer" wrote in message ... Because some pages in my doc are landscape and others are portrait, I need a footer that more or less automatically resizes: tab settings tend to create footer that are either too narrow for one seciont or to wide for another. I created a one row, 5-cell table defined as autofit to window so that it would span the page margin-to-margin. This seemed marvelous at first, but it started jumping back and forth to different sizes at about 3 cycles per second. So, then I tried breaking the footer links between portrait and landscape sections, adding about 5 footers to maintain in a 90 page doc. However, this did not resolve the auto-resize issue at all, any given footer continues to "resize," giving the appearance of "vibrating." How to fix this so doc displays in a stable fashion. |
#3
|
|||
|
|||
We had this problem one place I worked at. Users could not switch off the
autofit setting in the table as the footers were locked in code to prevent users from inserting anything that didn't conform to house style. The only way round it was to work in normal layout so you didn't see the footers. Don't know if that helps. Genine "Jezebel" wrote: Forget the autosize table. Having broken the footer links between sections, simply format each footer, using tabs, for the page width of that section. "Kind writer/user/programmer" wrote in message ... Because some pages in my doc are landscape and others are portrait, I need a footer that more or less automatically resizes: tab settings tend to create footer that are either too narrow for one seciont or to wide for another. I created a one row, 5-cell table defined as autofit to window so that it would span the page margin-to-margin. This seemed marvelous at first, but it started jumping back and forth to different sizes at about 3 cycles per second. So, then I tried breaking the footer links between portrait and landscape sections, adding about 5 footers to maintain in a 90 page doc. However, this did not resolve the auto-resize issue at all, any given footer continues to "resize," giving the appearance of "vibrating." How to fix this so doc displays in a stable fashion. |
#4
|
|||
|
|||
There's no way to 'lock footers in code' -- what had they actually done?
"Genine" wrote in message ... We had this problem one place I worked at. Users could not switch off the autofit setting in the table as the footers were locked in code to prevent users from inserting anything that didn't conform to house style. The only way round it was to work in normal layout so you didn't see the footers. Don't know if that helps. Genine "Jezebel" wrote: Forget the autosize table. Having broken the footer links between sections, simply format each footer, using tabs, for the page width of that section. "Kind writer/user/programmer" wrote in message ... Because some pages in my doc are landscape and others are portrait, I need a footer that more or less automatically resizes: tab settings tend to create footer that are either too narrow for one seciont or to wide for another. I created a one row, 5-cell table defined as autofit to window so that it would span the page margin-to-margin. This seemed marvelous at first, but it started jumping back and forth to different sizes at about 3 cycles per second. So, then I tried breaking the footer links between portrait and landscape sections, adding about 5 footers to maintain in a 90 page doc. However, this did not resolve the auto-resize issue at all, any given footer continues to "resize," giving the appearance of "vibrating." How to fix this so doc displays in a stable fashion. |
#5
|
|||
|
|||
They used a variety of measures including resetting the footer content to
standard housestyle settings each time you saved, printed, previewed or opened the document, which was all done in code. Although technically not a "lock" the effect was the same - you couldn't print or save your footer changes to the document. "Jezebel" wrote: There's no way to 'lock footers in code' -- what had they actually done? "Genine" wrote in message ... We had this problem one place I worked at. Users could not switch off the autofit setting in the table as the footers were locked in code to prevent users from inserting anything that didn't conform to house style. The only way round it was to work in normal layout so you didn't see the footers. Don't know if that helps. Genine "Jezebel" wrote: Forget the autosize table. Having broken the footer links between sections, simply format each footer, using tabs, for the page width of that section. "Kind writer/user/programmer" wrote in message ... Because some pages in my doc are landscape and others are portrait, I need a footer that more or less automatically resizes: tab settings tend to create footer that are either too narrow for one seciont or to wide for another. I created a one row, 5-cell table defined as autofit to window so that it would span the page margin-to-margin. This seemed marvelous at first, but it started jumping back and forth to different sizes at about 3 cycles per second. So, then I tried breaking the footer links between portrait and landscape sections, adding about 5 footers to maintain in a 90 page doc. However, this did not resolve the auto-resize issue at all, any given footer continues to "resize," giving the appearance of "vibrating." How to fix this so doc displays in a stable fashion. |
#6
|
|||
|
|||
Probably protected the document for forms.
-- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Jezebel" wrote in message ... There's no way to 'lock footers in code' -- what had they actually done? "Genine" wrote in message ... We had this problem one place I worked at. Users could not switch off the autofit setting in the table as the footers were locked in code to prevent users from inserting anything that didn't conform to house style. The only way round it was to work in normal layout so you didn't see the footers. Don't know if that helps. Genine "Jezebel" wrote: Forget the autosize table. Having broken the footer links between sections, simply format each footer, using tabs, for the page width of that section. "Kind writer/user/programmer" wrote in message ... Because some pages in my doc are landscape and others are portrait, I need a footer that more or less automatically resizes: tab settings tend to create footer that are either too narrow for one seciont or to wide for another. I created a one row, 5-cell table defined as autofit to window so that it would span the page margin-to-margin. This seemed marvelous at first, but it started jumping back and forth to different sizes at about 3 cycles per second. So, then I tried breaking the footer links between portrait and landscape sections, adding about 5 footers to maintain in a 90 page doc. However, this did not resolve the auto-resize issue at all, any given footer continues to "resize," giving the appearance of "vibrating." How to fix this so doc displays in a stable fashion. |
#7
|
|||
|
|||
I don't know because I didn't have the vba or forms passwords for the global
templates, but how it was done isn't really relevant to the question that was originally asked. The point was, that the only way to stop the annoying resizing of the tables in the footers was to work in Normal layout view so that the footers weren't visible. I don't know if that suggestion is acceptable to kinduser, but it's something to consider. Genine "Suzanne S. Barnhill" wrote: Probably protected the document for forms. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Jezebel" wrote in message ... There's no way to 'lock footers in code' -- what had they actually done? "Genine" wrote in message ... We had this problem one place I worked at. Users could not switch off the autofit setting in the table as the footers were locked in code to prevent users from inserting anything that didn't conform to house style. The only way round it was to work in normal layout so you didn't see the footers. Don't know if that helps. Genine "Jezebel" wrote: Forget the autosize table. Having broken the footer links between sections, simply format each footer, using tabs, for the page width of that section. "Kind writer/user/programmer" wrote in message ... Because some pages in my doc are landscape and others are portrait, I need a footer that more or less automatically resizes: tab settings tend to create footer that are either too narrow for one seciont or to wide for another. I created a one row, 5-cell table defined as autofit to window so that it would span the page margin-to-margin. This seemed marvelous at first, but it started jumping back and forth to different sizes at about 3 cycles per second. So, then I tried breaking the footer links between portrait and landscape sections, adding about 5 footers to maintain in a 90 page doc. However, this did not resolve the auto-resize issue at all, any given footer continues to "resize," giving the appearance of "vibrating." How to fix this so doc displays in a stable fashion. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Change Footer on pg 2 to be different then the footer on pg 1 | Microsoft Word Help | |||
Resources for Long Document Management | Microsoft Word Help | |||
Copying a Table Into a Table | Microsoft Word Help | |||
Getting the format of a table | Tables | |||
Word 2003 Table AutoFormat vs Macro vs VBA | Tables |