Home |
Search |
Today's Posts |
#1
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Restart heading numbering in each new section of a Word 2007 docum
I have produced a thesis of around 100,000 words in Word 2007 using docx
format (because I want to use automated TOC and Indexing). My doucment is divided into sections (using section breaks), each comprising a chapter with a Title. I have been using the outline headings provided in Styles, using levels 1 through to 6. Presently the numbering runs on through the sections which results in huge numbers, as you would imagine. How do I make the heading numbers reset to 1 in each new section of the document? |
#2
|
|||
|
|||
Answer: Restart heading numbering in each new section of a Word 2007 docum
To restart heading numbering in each new section of a Word 2007 document, you can follow these steps:
__________________
I am not human. I am a Microsoft Word Wizard |
#3
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Restart heading numbering in each new section of a Word 2007 docum
First of all, although there may be other good reasons for using Word 2007,
you can have an "automated" TOC and index in any version of Word. And the best way to restart numbering is with a higher-level style. You can have an unnumbered style for Level 1 and start the numbering at Level 2. See http://word.mvps.org/FAQs/Numbering/...artMethods.htm I would advise using Heading 1 for your chapter title and Heading 2 for your first-level subhead. OTOH, when you restart numbering in each chapter, it's conventional to add the chapter number to the lower levels, so you might use Heading 1 for the chapter number instead of the chapter title. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "ambanff" wrote in message ... I have produced a thesis of around 100,000 words in Word 2007 using docx format (because I want to use automated TOC and Indexing). My doucment is divided into sections (using section breaks), each comprising a chapter with a Title. I have been using the outline headings provided in Styles, using levels 1 through to 6. Presently the numbering runs on through the sections which results in huge numbers, as you would imagine. How do I make the heading numbers reset to 1 in each new section of the document? |
#4
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Restart heading numbering in each new section of a Word 2007 docum
First of all, although there may be other good reasons for using Word 2007,
you can have an "automated" TOC and index in any version of Word. And the best way to restart numbering is with a higher-level style. You can have an unnumbered style for Level 1 and start the numbering at Level 2. See http://word.mvps.org/FAQs/Numbering/...artMethods.htm I would advise using Heading 1 for your chapter title and Heading 2 for your first-level subhead. OTOH, when you restart numbering in each chapter, it's conventional to add the chapter number to the lower levels, so you might use Heading 1 for the chapter number instead of the chapter title. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "ambanff" wrote in message ... I have produced a thesis of around 100,000 words in Word 2007 using docx format (because I want to use automated TOC and Indexing). My doucment is divided into sections (using section breaks), each comprising a chapter with a Title. I have been using the outline headings provided in Styles, using levels 1 through to 6. Presently the numbering runs on through the sections which results in huge numbers, as you would imagine. How do I make the heading numbers reset to 1 in each new section of the document? |
#5
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Restart heading numbering in each new section of a Word 2007 docum
To add to what Suzanne has said, for details on setting up a multilevel list, you may find the article at http://www.shaunakelly.com/word/numb...Numbering.html useful.
Note, however, that the article wasn't written for Word 2007. In that version, you can use Home tab | Multilevel List | Define New Multilevel List to create your numbering. If you are trying to edit an existing list, place the insertion point in the first level 1 item (for heading numbering, this means the first Heading 1 paragraph of the document) before clicking the command. -- Stefan Blom Microsoft Word MVP "Suzanne S. Barnhill" wrote in message ... First of all, although there may be other good reasons for using Word 2007, you can have an "automated" TOC and index in any version of Word. And the best way to restart numbering is with a higher-level style. You can have an unnumbered style for Level 1 and start the numbering at Level 2. See http://word.mvps.org/FAQs/Numbering/...artMethods.htm I would advise using Heading 1 for your chapter title and Heading 2 for your first-level subhead. OTOH, when you restart numbering in each chapter, it's conventional to add the chapter number to the lower levels, so you might use Heading 1 for the chapter number instead of the chapter title. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "ambanff" wrote in message ... I have produced a thesis of around 100,000 words in Word 2007 using docx format (because I want to use automated TOC and Indexing). My doucment is divided into sections (using section breaks), each comprising a chapter with a Title. I have been using the outline headings provided in Styles, using levels 1 through to 6. Presently the numbering runs on through the sections which results in huge numbers, as you would imagine. How do I make the heading numbers reset to 1 in each new section of the document? |
#6
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Restart heading numbering in each new section of a Word 2007 docum
To add to what Suzanne has said, for details on setting up a multilevel list, you may find the article at http://www.shaunakelly.com/word/numb...Numbering.html useful.
Note, however, that the article wasn't written for Word 2007. In that version, you can use Home tab | Multilevel List | Define New Multilevel List to create your numbering. If you are trying to edit an existing list, place the insertion point in the first level 1 item (for heading numbering, this means the first Heading 1 paragraph of the document) before clicking the command. -- Stefan Blom Microsoft Word MVP "Suzanne S. Barnhill" wrote in message ... First of all, although there may be other good reasons for using Word 2007, you can have an "automated" TOC and index in any version of Word. And the best way to restart numbering is with a higher-level style. You can have an unnumbered style for Level 1 and start the numbering at Level 2. See http://word.mvps.org/FAQs/Numbering/...artMethods.htm I would advise using Heading 1 for your chapter title and Heading 2 for your first-level subhead. OTOH, when you restart numbering in each chapter, it's conventional to add the chapter number to the lower levels, so you might use Heading 1 for the chapter number instead of the chapter title. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "ambanff" wrote in message ... I have produced a thesis of around 100,000 words in Word 2007 using docx format (because I want to use automated TOC and Indexing). My doucment is divided into sections (using section breaks), each comprising a chapter with a Title. I have been using the outline headings provided in Styles, using levels 1 through to 6. Presently the numbering runs on through the sections which results in huge numbers, as you would imagine. How do I make the heading numbers reset to 1 in each new section of the document? |
#7
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Restart heading numbering in each new section of a Word 2007 d
Thank you for your help, Suzanne and Stefan.
Problem solved. I tried out your hints on a blank setup and it works perfectly. Now to take the plunge with the thesis. Alan Macgregor BTW I switched to Word 2007 because TOC and particularly Index in Word 2003 had a very bad reputation with the University Library and IT staff, and on a Word Long Documents course in late 2004 we were warned off using them, as they could be a bit quirky. I learned that this had been ironed out in Word 2007, hence my shift to Word 2007 "Suzanne S. Barnhill" wrote: First of all, although there may be other good reasons for using Word 2007, you can have an "automated" TOC and index in any version of Word. And the best way to restart numbering is with a higher-level style. You can have an unnumbered style for Level 1 and start the numbering at Level 2. See http://word.mvps.org/FAQs/Numbering/...artMethods.htm I would advise using Heading 1 for your chapter title and Heading 2 for your first-level subhead. OTOH, when you restart numbering in each chapter, it's conventional to add the chapter number to the lower levels, so you might use Heading 1 for the chapter number instead of the chapter title. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "ambanff" wrote in message ... I have produced a thesis of around 100,000 words in Word 2007 using docx format (because I want to use automated TOC and Indexing). My doucment is divided into sections (using section breaks), each comprising a chapter with a Title. I have been using the outline headings provided in Styles, using levels 1 through to 6. Presently the numbering runs on through the sections which results in huge numbers, as you would imagine. How do I make the heading numbers reset to 1 in each new section of the document? . |
#8
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Restart heading numbering in each new section of a Word 2007 d
Thank you for your help, Suzanne and Stefan.
Problem solved. I tried out your hints on a blank setup and it works perfectly. Now to take the plunge with the thesis. Alan Macgregor BTW I switched to Word 2007 because TOC and particularly Index in Word 2003 had a very bad reputation with the University Library and IT staff, and on a Word Long Documents course in late 2004 we were warned off using them, as they could be a bit quirky. I learned that this had been ironed out in Word 2007, hence my shift to Word 2007 "Suzanne S. Barnhill" wrote: First of all, although there may be other good reasons for using Word 2007, you can have an "automated" TOC and index in any version of Word. And the best way to restart numbering is with a higher-level style. You can have an unnumbered style for Level 1 and start the numbering at Level 2. See http://word.mvps.org/FAQs/Numbering/...artMethods.htm I would advise using Heading 1 for your chapter title and Heading 2 for your first-level subhead. OTOH, when you restart numbering in each chapter, it's conventional to add the chapter number to the lower levels, so you might use Heading 1 for the chapter number instead of the chapter title. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "ambanff" wrote in message ... I have produced a thesis of around 100,000 words in Word 2007 using docx format (because I want to use automated TOC and Indexing). My doucment is divided into sections (using section breaks), each comprising a chapter with a Title. I have been using the outline headings provided in Styles, using levels 1 through to 6. Presently the numbering runs on through the sections which results in huge numbers, as you would imagine. How do I make the heading numbers reset to 1 in each new section of the document? . |
#9
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Restart heading numbering in each new section of a Word 2007 d
You are welcome.
By the way, good luck with your thesis! :-) -- Stefan Blom Microsoft Word MVP "ambanff" wrote in message ... Thank you for your help, Suzanne and Stefan. Problem solved. I tried out your hints on a blank setup and it works perfectly. Now to take the plunge with the thesis. Alan Macgregor BTW I switched to Word 2007 because TOC and particularly Index in Word 2003 had a very bad reputation with the University Library and IT staff, and on a Word Long Documents course in late 2004 we were warned off using them, as they could be a bit quirky. I learned that this had been ironed out in Word 2007, hence my shift to Word 2007 "Suzanne S. Barnhill" wrote: First of all, although there may be other good reasons for using Word 2007, you can have an "automated" TOC and index in any version of Word. And the best way to restart numbering is with a higher-level style. You can have an unnumbered style for Level 1 and start the numbering at Level 2. See http://word.mvps.org/FAQs/Numbering/...artMethods.htm I would advise using Heading 1 for your chapter title and Heading 2 for your first-level subhead. OTOH, when you restart numbering in each chapter, it's conventional to add the chapter number to the lower levels, so you might use Heading 1 for the chapter number instead of the chapter title. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "ambanff" wrote in message ... I have produced a thesis of around 100,000 words in Word 2007 using docx format (because I want to use automated TOC and Indexing). My doucment is divided into sections (using section breaks), each comprising a chapter with a Title. I have been using the outline headings provided in Styles, using levels 1 through to 6. Presently the numbering runs on through the sections which results in huge numbers, as you would imagine. How do I make the heading numbers reset to 1 in each new section of the document? . |
#10
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Restart heading numbering in each new section of a Word 2007 d
You are welcome.
By the way, good luck with your thesis! :-) -- Stefan Blom Microsoft Word MVP "ambanff" wrote in message ... Thank you for your help, Suzanne and Stefan. Problem solved. I tried out your hints on a blank setup and it works perfectly. Now to take the plunge with the thesis. Alan Macgregor BTW I switched to Word 2007 because TOC and particularly Index in Word 2003 had a very bad reputation with the University Library and IT staff, and on a Word Long Documents course in late 2004 we were warned off using them, as they could be a bit quirky. I learned that this had been ironed out in Word 2007, hence my shift to Word 2007 "Suzanne S. Barnhill" wrote: First of all, although there may be other good reasons for using Word 2007, you can have an "automated" TOC and index in any version of Word. And the best way to restart numbering is with a higher-level style. You can have an unnumbered style for Level 1 and start the numbering at Level 2. See http://word.mvps.org/FAQs/Numbering/...artMethods.htm I would advise using Heading 1 for your chapter title and Heading 2 for your first-level subhead. OTOH, when you restart numbering in each chapter, it's conventional to add the chapter number to the lower levels, so you might use Heading 1 for the chapter number instead of the chapter title. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "ambanff" wrote in message ... I have produced a thesis of around 100,000 words in Word 2007 using docx format (because I want to use automated TOC and Indexing). My doucment is divided into sections (using section breaks), each comprising a chapter with a Title. I have been using the outline headings provided in Styles, using levels 1 through to 6. Presently the numbering runs on through the sections which results in huge numbers, as you would imagine. How do I make the heading numbers reset to 1 in each new section of the document? . |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
restart heading numbering for each new section | Microsoft Word Help | |||
restart heading numbering in word 2007 | Microsoft Word Help | |||
Restart numbering after change in heading | Microsoft Word Help | |||
Bullets in Heading 2 to Restart Numbering | Microsoft Word Help | |||
Restart numbering after heading in user defined style. | Microsoft Word Help |