If I type in, $256.00, I want it to show: Two Hundred Fifty-six and No/100
Dollars ($256.00). How can I do this?

If the number is a field, you can use the \*DollarText switch. See the Help
topic "Format (\*) field switch."

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Theresa Wright" wrote in message
...
If I type in, $256.00, I want it to show: Two Hundred Fifty-six and No/100
Dollars ($256.00). How can I do this?

a field? i don't know what that is, but this is what i am doing: just typing
along regular text in a document and the dictation says, "$256.00, but spell
it out". i had a really great macro in word perfect that would change it,
but i can't seem to find anything like that in word.


"Suzanne S. Barnhill" wrote:

If the number is a field, you can use the \*DollarText switch. See the Help
topic "Format (\*) field switch."

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Theresa Wright" wrote in message
...
If I type in, $256.00, I want it to show: Two Hundred Fifty-six and No/100
Dollars ($256.00). How can I do this?

I think I got this from Doug Robbins a while back. You have to select the
text then run the macro:

Option Explicit
Sub ConvertCurrencyToWords()
Dim MyNumber As Range
Set MyNumber = Selection.Range
MyNumber.Text = ConvertCurrencyToEnglish(ByVal MyNumber)
End Sub
Function ConvertCurrencyToEnglish(ByVal MyNumber)
Dim Temp
Dim Dollars, Cents
Dim DecimalPlace, Count

ReDim Place(9) As String
Place(2) = " Thousand "
Place(3) = " Million "
Place(4) = " Billion "
Place(5) = " Trillion "

MyNumber = Trim(Str(MyNumber))

DecimalPlace = InStr(MyNumber, ".")
If DecimalPlace 0 Then
Temp = Left(Mid(MyNumber, DecimalPlace + 1) & "00", 2)
Cents = ConvertTens(Temp)
MyNumber = Trim(Left(MyNumber, DecimalPlace - 1))
End If
Count = 1
Do While MyNumber ""
'convert last 3 digits to English Dollars
Temp = ConvertHundreds(Right(MyNumber, 3))
If Temp "" Then Dollars = Temp & Place(Count) & Dollars
If Len(MyNumber) 3 Then
'remove last 3 comverted digits
MyNumber = Left(MyNumber, Len(MyNumber) - 3)
Else
MyNumber = ""
End If
Count = Count + 1
Loop

'clean up dollars
Select Case Dollars
Case ""
Dollars = "NoDollars"
Case "One"
Dollars = "One Dollar"
Case Else
Dollars = Dollars & " Dollars"
End Select

'clean up cents
Select Case Cents
Case ""
Cents = " And No Cents"
Case "One"
Cents = " And One Cent"
Case Else
Cents = " And " & Cents & " Cents"
End Select
ConvertCurrencyToEnglish = Dollars & Cents
End Function
Private Function ConvertHundreds(ByVal MyNumber)
Dim Result As String
If Val(MyNumber) = 0 Then Exit Function

'append leading zeros to number
MyNumber = Right("000" & MyNumber, 3)

'do we have hundreds place digit to convert?
If Left(MyNumber, 1) "0" Then
Result = ConvertDigit(Left(MyNumber, 1)) & " Hundred "
End If

'do we have tens place digit to convert?
If Mid(MyNumber, 2, 1) "0" Then
Result = Result & ConvertTens(Mid(MyNumber, 2))
Else
'if not, then convert the ones place digit
Result = Result & ConvertDigit(Mid(MyNumber, 3))
End If
ConvertHundreds = Trim(Result)
End Function
Private Function ConvertTens(ByVal MyTens)
Dim Result As String
'is value between 10 and 19?
If Val(Left(MyTens, 1)) = 1 Then
Select Case Val(MyTens)
Case 10: Result = "Ten"
Case 11: Result = "Eleven"
Case 12: Result = "Twelve"
Case 13: Result = "Thirteen"
Case 14: Result = "Fourteen"
Case 15: Result = "Fifteen"
Case 16: Result = "Sixteen"
Case 17: Result = "Seventeen"
Case 18: Result = "Eighteen"
Case 19: Result = "Nineteen"
Case Else
End Select
Else
Select Case Val(Left(MyTens, 1))
Case 2: Result = "Twenty "
Case 3: Result = "Thirty "
Case 4: Result = "Forty "
Case 5: Result = "Fifty "
Case 6: Result = "Sixty "
Case 7: Result = "Seventy "
Case 8: Result = "Eighty "
Case 9: Result = "Ninety "
Case Else
End Select

'convert ones place digit
Result = Result & ConvertDigit(Right(MyTens, 1))
End If
ConvertTens = Result
End Function
Private Function ConvertDigit(ByVal MyDigit)
Select Case Val(MyDigit)
Case 1: ConvertDigit = "One"
Case 2: ConvertDigit = "Two"
Case 3: ConvertDigit = "Three"
Case 4: ConvertDigit = "Four"
Case 5: ConvertDigit = "Five"
Case 6: ConvertDigit = "Six"
Case 7: ConvertDigit = "Seven"
Case 8: ConvertDigit = "Eight"
Case 9: ConvertDigit = "Nine"
Case Else: ConvertDigit = ""
End Select
End Function

--
Greg Maxey/Word MVP
A Peer in Peer to Peer Support

Theresa Wright wrote:
a field? i don't know what that is, but this is what i am doing: just
typing along regular text in a document and the dictation says,
"$256.00, but spell it out". i had a really great macro in word
perfect that would change it, but i can't seem to find anything like
that in word.


"Suzanne S. Barnhill" wrote:

If the number is a field, you can use the \*DollarText switch. See
the Help topic "Format (\*) field switch."

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so all may benefit.

"Theresa Wright" wrote in
message ...
If I type in, $256.00, I want it to show: Two Hundred Fifty-six and
No/100 Dollars ($256.00). How can I do this?

Greg,
Without meaning to sound really really dumb, what do i do with all these
instructions? do i copy and paste it into something?

"Greg Maxey" wrote:

I think I got this from Doug Robbins a while back. You have to select the
text then run the macro:

Option Explicit
Sub ConvertCurrencyToWords()
Dim MyNumber As Range
Set MyNumber = Selection.Range
MyNumber.Text = ConvertCurrencyToEnglish(ByVal MyNumber)
End Sub
Function ConvertCurrencyToEnglish(ByVal MyNumber)
Dim Temp
Dim Dollars, Cents
Dim DecimalPlace, Count

ReDim Place(9) As String
Place(2) = " Thousand "
Place(3) = " Million "
Place(4) = " Billion "
Place(5) = " Trillion "

MyNumber = Trim(Str(MyNumber))

DecimalPlace = InStr(MyNumber, ".")
If DecimalPlace 0 Then
Temp = Left(Mid(MyNumber, DecimalPlace + 1) & "00", 2)
Cents = ConvertTens(Temp)
MyNumber = Trim(Left(MyNumber, DecimalPlace - 1))
End If
Count = 1
Do While MyNumber ""
'convert last 3 digits to English Dollars
Temp = ConvertHundreds(Right(MyNumber, 3))
If Temp "" Then Dollars = Temp & Place(Count) & Dollars
If Len(MyNumber) 3 Then
'remove last 3 comverted digits
MyNumber = Left(MyNumber, Len(MyNumber) - 3)
Else
MyNumber = ""
End If
Count = Count + 1
Loop

'clean up dollars
Select Case Dollars
Case ""
Dollars = "NoDollars"
Case "One"
Dollars = "One Dollar"
Case Else
Dollars = Dollars & " Dollars"
End Select

'clean up cents
Select Case Cents
Case ""
Cents = " And No Cents"
Case "One"
Cents = " And One Cent"
Case Else
Cents = " And " & Cents & " Cents"
End Select
ConvertCurrencyToEnglish = Dollars & Cents
End Function
Private Function ConvertHundreds(ByVal MyNumber)
Dim Result As String
If Val(MyNumber) = 0 Then Exit Function

'append leading zeros to number
MyNumber = Right("000" & MyNumber, 3)

'do we have hundreds place digit to convert?
If Left(MyNumber, 1) "0" Then
Result = ConvertDigit(Left(MyNumber, 1)) & " Hundred "
End If

'do we have tens place digit to convert?
If Mid(MyNumber, 2, 1) "0" Then
Result = Result & ConvertTens(Mid(MyNumber, 2))
Else
'if not, then convert the ones place digit
Result = Result & ConvertDigit(Mid(MyNumber, 3))
End If
ConvertHundreds = Trim(Result)
End Function
Private Function ConvertTens(ByVal MyTens)
Dim Result As String
'is value between 10 and 19?
If Val(Left(MyTens, 1)) = 1 Then
Select Case Val(MyTens)
Case 10: Result = "Ten"
Case 11: Result = "Eleven"
Case 12: Result = "Twelve"
Case 13: Result = "Thirteen"
Case 14: Result = "Fourteen"
Case 15: Result = "Fifteen"
Case 16: Result = "Sixteen"
Case 17: Result = "Seventeen"
Case 18: Result = "Eighteen"
Case 19: Result = "Nineteen"
Case Else
End Select
Else
Select Case Val(Left(MyTens, 1))
Case 2: Result = "Twenty "
Case 3: Result = "Thirty "
Case 4: Result = "Forty "
Case 5: Result = "Fifty "
Case 6: Result = "Sixty "
Case 7: Result = "Seventy "
Case 8: Result = "Eighty "
Case 9: Result = "Ninety "
Case Else
End Select

'convert ones place digit
Result = Result & ConvertDigit(Right(MyTens, 1))
End If
ConvertTens = Result
End Function
Private Function ConvertDigit(ByVal MyDigit)
Select Case Val(MyDigit)
Case 1: ConvertDigit = "One"
Case 2: ConvertDigit = "Two"
Case 3: ConvertDigit = "Three"
Case 4: ConvertDigit = "Four"
Case 5: ConvertDigit = "Five"
Case 6: ConvertDigit = "Six"
Case 7: ConvertDigit = "Seven"
Case 8: ConvertDigit = "Eight"
Case 9: ConvertDigit = "Nine"
Case Else: ConvertDigit = ""
End Select
End Function

--
Greg Maxey/Word MVP
A Peer in Peer to Peer Support

Theresa Wright wrote:
a field? i don't know what that is, but this is what i am doing: just
typing along regular text in a document and the dictation says,
"$256.00, but spell it out". i had a really great macro in word
perfect that would change it, but i can't seem to find anything like
that in word.


"Suzanne S. Barnhill" wrote:

If the number is a field, you can use the \*DollarText switch. See
the Help topic "Format (\*) field switch."

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so all may benefit.

"Theresa Wright" wrote in
message ...
If I type in, $256.00, I want it to show: Two Hundred Fifty-six and
No/100 Dollars ($256.00). How can I do this?

Theresa,

Pal Graham Mayor has a nice way of showing you how to do this without making
you sound dumb or stupid at all :-).

http://www.gmayor.com/installing_macro.htm

--
Greg Maxey/Word MVP
A Peer in Peer to Peer Support

Theresa Wright wrote:
Greg,
Without meaning to sound really really dumb, what do i do with all
these instructions? do i copy and paste it into something?

"Greg Maxey" wrote:

I think I got this from Doug Robbins a while back. You have to
select the text then run the macro:

Option Explicit
Sub ConvertCurrencyToWords()
Dim MyNumber As Range
Set MyNumber = Selection.Range
MyNumber.Text = ConvertCurrencyToEnglish(ByVal MyNumber)
End Sub
Function ConvertCurrencyToEnglish(ByVal MyNumber)
Dim Temp
Dim Dollars, Cents
Dim DecimalPlace, Count

ReDim Place(9) As String
Place(2) = " Thousand "
Place(3) = " Million "
Place(4) = " Billion "
Place(5) = " Trillion "

MyNumber = Trim(Str(MyNumber))

DecimalPlace = InStr(MyNumber, ".")
If DecimalPlace 0 Then
Temp = Left(Mid(MyNumber, DecimalPlace + 1) & "00", 2)
Cents = ConvertTens(Temp)
MyNumber = Trim(Left(MyNumber, DecimalPlace - 1))
End If
Count = 1
Do While MyNumber ""
'convert last 3 digits to English Dollars
Temp = ConvertHundreds(Right(MyNumber, 3))
If Temp "" Then Dollars = Temp & Place(Count) & Dollars
If Len(MyNumber) 3 Then
'remove last 3 comverted digits
MyNumber = Left(MyNumber, Len(MyNumber) - 3)
Else
MyNumber = ""
End If
Count = Count + 1
Loop

'clean up dollars
Select Case Dollars
Case ""
Dollars = "NoDollars"
Case "One"
Dollars = "One Dollar"
Case Else
Dollars = Dollars & " Dollars"
End Select

'clean up cents
Select Case Cents
Case ""
Cents = " And No Cents"
Case "One"
Cents = " And One Cent"
Case Else
Cents = " And " & Cents & " Cents"
End Select
ConvertCurrencyToEnglish = Dollars & Cents
End Function
Private Function ConvertHundreds(ByVal MyNumber)
Dim Result As String
If Val(MyNumber) = 0 Then Exit Function

'append leading zeros to number
MyNumber = Right("000" & MyNumber, 3)

'do we have hundreds place digit to convert?
If Left(MyNumber, 1) "0" Then
Result = ConvertDigit(Left(MyNumber, 1)) & " Hundred "
End If

'do we have tens place digit to convert?
If Mid(MyNumber, 2, 1) "0" Then
Result = Result & ConvertTens(Mid(MyNumber, 2))
Else
'if not, then convert the ones place digit
Result = Result & ConvertDigit(Mid(MyNumber, 3))
End If
ConvertHundreds = Trim(Result)
End Function
Private Function ConvertTens(ByVal MyTens)
Dim Result As String
'is value between 10 and 19?
If Val(Left(MyTens, 1)) = 1 Then
Select Case Val(MyTens)
Case 10: Result = "Ten"
Case 11: Result = "Eleven"
Case 12: Result = "Twelve"
Case 13: Result = "Thirteen"
Case 14: Result = "Fourteen"
Case 15: Result = "Fifteen"
Case 16: Result = "Sixteen"
Case 17: Result = "Seventeen"
Case 18: Result = "Eighteen"
Case 19: Result = "Nineteen"
Case Else
End Select
Else
Select Case Val(Left(MyTens, 1))
Case 2: Result = "Twenty "
Case 3: Result = "Thirty "
Case 4: Result = "Forty "
Case 5: Result = "Fifty "
Case 6: Result = "Sixty "
Case 7: Result = "Seventy "
Case 8: Result = "Eighty "
Case 9: Result = "Ninety "
Case Else
End Select

'convert ones place digit
Result = Result & ConvertDigit(Right(MyTens, 1))
End If
ConvertTens = Result
End Function
Private Function ConvertDigit(ByVal MyDigit)
Select Case Val(MyDigit)
Case 1: ConvertDigit = "One"
Case 2: ConvertDigit = "Two"
Case 3: ConvertDigit = "Three"
Case 4: ConvertDigit = "Four"
Case 5: ConvertDigit = "Five"
Case 6: ConvertDigit = "Six"
Case 7: ConvertDigit = "Seven"
Case 8: ConvertDigit = "Eight"
Case 9: ConvertDigit = "Nine"
Case Else: ConvertDigit = ""
End Select
End Function

--
Greg Maxey/Word MVP
A Peer in Peer to Peer Support

Theresa Wright wrote:
a field? i don't know what that is, but this is what i am doing:
just typing along regular text in a document and the dictation says,
"$256.00, but spell it out". i had a really great macro in word
perfect that would change it, but i can't seem to find anything like
that in word.


"Suzanne S. Barnhill" wrote:

If the number is a field, you can use the \*DollarText switch. See
the Help topic "Format (\*) field switch."

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so all may benefit.

"Theresa Wright" wrote in
message ...
If I type in, $256.00, I want it to show: Two Hundred Fifty-six
and No/100 Dollars ($256.00). How can I do this?