Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Dotted leaders in a toc
The dotted leaders in a toc are a shade too long for my tastes.
How do you leave a small gap at each end of the leader? |
#2
|
|||
|
|||
You don't--at least not without a lot of tedious work. The way this *should*
work is as follows: 1. You set a right tab stop short of the page numbers and give it a period leader, removing the leader from the page number tab stop. 2. You then have to get Word to honor an extra tab character in the TOC entry (since two tab characters will be required to reach the page number tab stop). This is where the trouble begins. 3. You insert a tab character at the end of the heading in the document, then add the \w switch to the TOC field, which is supposed to preserve tab characters in TOC entries (and apparently does in some situations), but this just doesn't work: the trailing tab character is ignored. It may occur to you to insert an extra tab character in each TOC entry manually, but every time you update the TOC, it will be removed. The only thing that will work, therefore, is to wait until editing is complete and you are confident that no page numbers will change, then either unlink the TOC and add the tab characters or add the tab characters and lock the TOC. It's really annoying that all the above is true, but it's a sad fact. Sorry. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Paul Terrano" wrote in message ... The dotted leaders in a toc are a shade too long for my tastes. How do you leave a small gap at each end of the leader? |
#3
|
|||
|
|||
Surprisingly, I am no longer offended by the way the leaders
look. Thanks. "Suzanne S. Barnhill" wrote in message ... You don't--at least not without a lot of tedious work. The way this *should* work is as follows: 1. You set a right tab stop short of the page numbers and give it a period leader, removing the leader from the page number tab stop. 2. You then have to get Word to honor an extra tab character in the TOC entry (since two tab characters will be required to reach the page number tab stop). This is where the trouble begins. 3. You insert a tab character at the end of the heading in the document, then add the \w switch to the TOC field, which is supposed to preserve tab characters in TOC entries (and apparently does in some situations), but this just doesn't work: the trailing tab character is ignored. It may occur to you to insert an extra tab character in each TOC entry manually, but every time you update the TOC, it will be removed. The only thing that will work, therefore, is to wait until editing is complete and you are confident that no page numbers will change, then either unlink the TOC and add the tab characters or add the tab characters and lock the TOC. It's really annoying that all the above is true, but it's a sad fact. Sorry. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Paul Terrano" wrote in message ... The dotted leaders in a toc are a shade too long for my tastes. How do you leave a small gap at each end of the leader? |
#4
|
|||
|
|||
g That's my reaction as well. For situations where it *really* matters to
me (printed books, important reports), I'll go to the trouble of formatting it properly as the last step in tweaking the CRC, but for most documents, it's just not worth the aggro. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Paul Terrano" wrote in message ... Surprisingly, I am no longer offended by the way the leaders look. Thanks. "Suzanne S. Barnhill" wrote in message ... You don't--at least not without a lot of tedious work. The way this *should* work is as follows: 1. You set a right tab stop short of the page numbers and give it a period leader, removing the leader from the page number tab stop. 2. You then have to get Word to honor an extra tab character in the TOC entry (since two tab characters will be required to reach the page number tab stop). This is where the trouble begins. 3. You insert a tab character at the end of the heading in the document, then add the \w switch to the TOC field, which is supposed to preserve tab characters in TOC entries (and apparently does in some situations), but this just doesn't work: the trailing tab character is ignored. It may occur to you to insert an extra tab character in each TOC entry manually, but every time you update the TOC, it will be removed. The only thing that will work, therefore, is to wait until editing is complete and you are confident that no page numbers will change, then either unlink the TOC and add the tab characters or add the tab characters and lock the TOC. It's really annoying that all the above is true, but it's a sad fact. Sorry. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Paul Terrano" wrote in message ... The dotted leaders in a toc are a shade too long for my tastes. How do you leave a small gap at each end of the leader? |
#5
|
|||
|
|||
On Thu, 6 Jan 2005 12:13:10 -0600, "Suzanne S. Barnhill"
wrote: You don't--at least not without a lot of tedious work. The way this *should* work is as follows: 1. You set a right tab stop short of the page numbers and give it a period leader, removing the leader from the page number tab stop. 2. You then have to get Word to honor an extra tab character in the TOC entry (since two tab characters will be required to reach the page number tab stop). This is where the trouble begins. 3. You insert a tab character at the end of the heading in the document, then add the \w switch to the TOC field, which is supposed to preserve tab characters in TOC entries (and apparently does in some situations), but this just doesn't work: the trailing tab character is ignored. It may occur to you to insert an extra tab character in each TOC entry manually, but every time you update the TOC, it will be removed. The only thing that will work, therefore, is to wait until editing is complete and you are confident that no page numbers will change, then either unlink the TOC and add the tab characters or add the tab characters and lock the TOC. It's really annoying that all the above is true, but it's a sad fact. Sorry. With regard to the trailing tab characters being ignored: It occurs to me that this may be Word suppressing trailing white space, and that you might be able to avoid Word's "assistance" by convincing it that the white space was not trailing. Have you tried adding a tab plus a non-breaking space, or a tab plus an ordinary letter formatted as white? Bob S |
#6
|
|||
|
|||
I have suggested both those tricks for investigation, but I hadn't actually
tried them. What I have just discovered, however, is that a nonbreaking space does not work, but a character formatted as white does--even without the \w switch! Note that this technique will work only for left-aligned headings (the tab followed by a character would throw off the alignment of centered ones); the length of the heading should not be a problem, since headings longer than about 2/3 of a line (or less) should be wrapped to the next line anyway. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Bob S" wrote in message ... On Thu, 6 Jan 2005 12:13:10 -0600, "Suzanne S. Barnhill" wrote: You don't--at least not without a lot of tedious work. The way this *should* work is as follows: 1. You set a right tab stop short of the page numbers and give it a period leader, removing the leader from the page number tab stop. 2. You then have to get Word to honor an extra tab character in the TOC entry (since two tab characters will be required to reach the page number tab stop). This is where the trouble begins. 3. You insert a tab character at the end of the heading in the document, then add the \w switch to the TOC field, which is supposed to preserve tab characters in TOC entries (and apparently does in some situations), but this just doesn't work: the trailing tab character is ignored. It may occur to you to insert an extra tab character in each TOC entry manually, but every time you update the TOC, it will be removed. The only thing that will work, therefore, is to wait until editing is complete and you are confident that no page numbers will change, then either unlink the TOC and add the tab characters or add the tab characters and lock the TOC. It's really annoying that all the above is true, but it's a sad fact. Sorry. With regard to the trailing tab characters being ignored: It occurs to me that this may be Word suppressing trailing white space, and that you might be able to avoid Word's "assistance" by convincing it that the white space was not trailing. Have you tried adding a tab plus a non-breaking space, or a tab plus an ordinary letter formatted as white? Bob S |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Dot Leaders | Microsoft Word Help | |||
How do I create dot leaders in creating an Index page? | Microsoft Word Help | |||
Tab leaders etc | Microsoft Word Help | |||
Word 2003 dotted lines | Page Layout | |||
Formatting tabs with leaders option is not working. | Microsoft Word Help |