Home |
Search |
Today's Posts |
#1
Posted to microsoft.public.word.tables
|
|||
|
|||
"(Continued)" in Table and not in Table of Tables (Word 2007)
Hi. I have a few questions that I hope someone can assist me with. Please
excuse me if these have been asked and answered before... 1) I have some long tables than span two or three pages. I want the word "continued" on subsequent pages but not the first page. I also don't want the "continued" word to show up in the Table of Figures (Tables). Currently I have the Table caption in a header row on the table so that it spans multiple pages and I have the word "continued" on all pages. I can use a Text box to hide the word "continued" on the first page but I can't figure out how to hide it in the Table of Figures (Tables). Any suggestions or other approaches to the problem? 2) Is there any way to have rows above a ToC or Table of Figures so that on later pages it says (continued) at the top? I suppose I could do this with a special header section but I thought there might be an easier way. Suggestions? 3) I converted my document from a Word 2003 document and things seemed to be working fine. Then "something" happened and now my List of Figures and List of Tables are no longer sequential. They skip Figures and Tables. The Tables and Figures in the document number sequentially fine. The ToC is fine too. I've tried deleting and re-inserting captions from tables/figures that enumerate okay but didn't solve the problem. I'd appreciate any and all help on this one... Thanks! - Charles |
#2
Posted to microsoft.public.word.tables
|
|||
|
|||
"(Continued)" in Table and not in Table of Tables (Word 2007)
Under the circumstances, I think using the page header is probably the only
recourse (you'll need the table to be in a separate section, of course). The alternative would be a TC field, but that would work only if your TOF were actually a TOC. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA "CharlesM777" wrote in message ... Hi. I have a few questions that I hope someone can assist me with. Please excuse me if these have been asked and answered before... 1) I have some long tables than span two or three pages. I want the word "continued" on subsequent pages but not the first page. I also don't want the "continued" word to show up in the Table of Figures (Tables). Currently I have the Table caption in a header row on the table so that it spans multiple pages and I have the word "continued" on all pages. I can use a Text box to hide the word "continued" on the first page but I can't figure out how to hide it in the Table of Figures (Tables). Any suggestions or other approaches to the problem? 2) Is there any way to have rows above a ToC or Table of Figures so that on later pages it says (continued) at the top? I suppose I could do this with a special header section but I thought there might be an easier way. Suggestions? 3) I converted my document from a Word 2003 document and things seemed to be working fine. Then "something" happened and now my List of Figures and List of Tables are no longer sequential. They skip Figures and Tables. The Tables and Figures in the document number sequentially fine. The ToC is fine too. I've tried deleting and re-inserting captions from tables/figures that enumerate okay but didn't solve the problem. I'd appreciate any and all help on this one... Thanks! - Charles |
#3
Posted to microsoft.public.word.tables
|
|||
|
|||
"(Continued)" in Table and not in Table of Tables (Word 2007)
(1)
You can use the style separator in documents that will be used again in W2003 and take advantage of linked styles for those that will stay in W2007. You need an addition style (say, fake caption) that has the same formatting as the caption style for both methods. In the W2003 method type the caption text (use caption style) and the continued text (use fake caption style) in separate paragraphs and apply the appropriate style to each. Put the cursor in the caption text paragraph and press ctrl+alt+enter to insert the style separator. When the show/hide button if off, the paragraphs will appear one line. In the W2007 method, type the caption text and continued text in one paragraph. If necessary, modify the caption and fake caption styles so the style type is "linked (paragraph and character)". Then apply the appropriate style to the caption text and the continued text. (3) If your lists of figures and tables are skipping captions, check to be sure that the proper style is applied to each caption. PamC CharlesM777 wrote: Hi. I have a few questions that I hope someone can assist me with. Please excuse me if these have been asked and answered before... 1) I have some long tables than span two or three pages. I want the word "continued" on subsequent pages but not the first page. I also don't want the "continued" word to show up in the Table of Figures (Tables). Currently I have the Table caption in a header row on the table so that it spans multiple pages and I have the word "continued" on all pages. I can use a Text box to hide the word "continued" on the first page but I can't figure out how to hide it in the Table of Figures (Tables). Any suggestions or other approaches to the problem? 2) Is there any way to have rows above a ToC or Table of Figures so that on later pages it says (continued) at the top? I suppose I could do this with a special header section but I thought there might be an easier way. Suggestions? 3) I converted my document from a Word 2003 document and things seemed to be working fine. Then "something" happened and now my List of Figures and List of Tables are no longer sequential. They skip Figures and Tables. The Tables and Figures in the document number sequentially fine. The ToC is fine too. I've tried deleting and re-inserting captions from tables/figures that enumerate okay but didn't solve the problem. I'd appreciate any and all help on this one... Thanks! - Charles -- Message posted via OfficeKB.com http://www.officekb.com/Uwe/Forums.a...ables/200811/1 |
#4
Posted to microsoft.public.word.tables
|
|||
|
|||
"(Continued)" in Table and not in Table of Tables (Word 2007)
Thank you both for your suggestion!. PamC, your method (1) worked great for
the removal of "(continued)" in the TOF. However, I found I still needed to use a style separator in Word2007. Did I miss something? On item (3), I verified that all the captions are of the "caption" style. They enumerate okay in the document but not in the TOF. An oddity: if I duplicate an errant caption so that it is on two lines then the second caption appears in the TOF. If I then delete the first (errant) caption then both captions don't show up in the TOF. Any other ideas? "PamC via OfficeKB.com" wrote: (1) You can use the style separator in documents that will be used again in W2003 and take advantage of linked styles for those that will stay in W2007. You need an addition style (say, fake caption) that has the same formatting as the caption style for both methods. In the W2003 method type the caption text (use caption style) and the continued text (use fake caption style) in separate paragraphs and apply the appropriate style to each. Put the cursor in the caption text paragraph and press ctrl+alt+enter to insert the style separator. When the show/hide button if off, the paragraphs will appear one line. In the W2007 method, type the caption text and continued text in one paragraph. If necessary, modify the caption and fake caption styles so the style type is "linked (paragraph and character)". Then apply the appropriate style to the caption text and the continued text. (3) If your lists of figures and tables are skipping captions, check to be sure that the proper style is applied to each caption. PamC CharlesM777 wrote: Hi. I have a few questions that I hope someone can assist me with. Please excuse me if these have been asked and answered before... 1) I have some long tables than span two or three pages. I want the word "continued" on subsequent pages but not the first page. I also don't want the "continued" word to show up in the Table of Figures (Tables). Currently I have the Table caption in a header row on the table so that it spans multiple pages and I have the word "continued" on all pages. I can use a Text box to hide the word "continued" on the first page but I can't figure out how to hide it in the Table of Figures (Tables). Any suggestions or other approaches to the problem? 2) Is there any way to have rows above a ToC or Table of Figures so that on later pages it says (continued) at the top? I suppose I could do this with a special header section but I thought there might be an easier way. Suggestions? 3) I converted my document from a Word 2003 document and things seemed to be working fine. Then "something" happened and now my List of Figures and List of Tables are no longer sequential. They skip Figures and Tables. The Tables and Figures in the document number sequentially fine. The ToC is fine too. I've tried deleting and re-inserting captions from tables/figures that enumerate okay but didn't solve the problem. I'd appreciate any and all help on this one... Thanks! - Charles -- Message posted via OfficeKB.com http://www.officekb.com/Uwe/Forums.a...ables/200811/1 |
#5
Posted to microsoft.public.word.tables
|
|||
|
|||
"(Continued)" in Table and not in Table of Tables (Word 2007)
For (1), I did forget to mention that in the styles pane, the checkbox for
_disable linked styles_ must be cleared. Come to think of it, linked styles may not work if you are in the compatibility mode. For item (3), could there be line feeds and not paragraph marks at the ends of your captions? Or are the captions in text boxes, which the TOC in W2003 (and therefore the W2007 compatibility mode) cannot read? PamC CharlesM777 wrote: Thank you both for your suggestion!. PamC, your method (1) worked great for the removal of "(continued)" in the TOF. However, I found I still needed to use a style separator in Word2007. Did I miss something? On item (3), I verified that all the captions are of the "caption" style. They enumerate okay in the document but not in the TOF. An oddity: if I duplicate an errant caption so that it is on two lines then the second caption appears in the TOF. If I then delete the first (errant) caption then both captions don't show up in the TOF. Any other ideas? (1) You can use the style separator in documents that will be used again in [quoted text clipped - 46 lines] Thanks! - Charles -- Message posted via OfficeKB.com http://www.officekb.com/Uwe/Forums.a...ables/200811/1 |
#6
Posted to microsoft.public.word.tables
|
|||
|
|||
"(Continued)" in Table and not in Table of Tables (Word 2007)
For (1), I did forget to mention that in the styles pane, the checkbox for
_disable linked styles_ must be cleared. Come to think of it, linked styles may not work if you are in the compatibility mode. For item (3), could there be line feeds and not paragraph marks at the ends of your captions? Or are the captions in text boxes, which the TOC in W2003 (and therefore the W2007 compatibility mode) cannot read? PamC CharlesM777 wrote: Thank you both for your suggestion!. PamC, your method (1) worked great for the removal of "(continued)" in the TOF. However, I found I still needed to use a style separator in Word2007. Did I miss something? On item (3), I verified that all the captions are of the "caption" style. They enumerate okay in the document but not in the TOF. An oddity: if I duplicate an errant caption so that it is on two lines then the second caption appears in the TOF. If I then delete the first (errant) caption then both captions don't show up in the TOF. Any other ideas? (1) You can use the style separator in documents that will be used again in [quoted text clipped - 46 lines] Thanks! - Charles -- Message posted via OfficeKB.com http://www.officekb.com/Uwe/Forums.a...ables/200811/1 |
#7
Posted to microsoft.public.word.tables
|
|||
|
|||
"(Continued)" in Table and not in Table of Tables (Word 2007)
I've compared the format of the captions on "working" figures to
"non-working" figures and they are the same. All captions were created with the Figure-caption option and not text boxes. Is there some other "hidden" information that Word 2007uses to build the TOF? If I take the document and load into Word 2003 then it builds the TOC correctly. However, in doing so I lose tons of document formatting... "PamC via OfficeKB.com" wrote: snip For item (3), could there be line feeds and not paragraph marks at the ends of your captions? Or are the captions in text boxes, which the TOC in W2003 (and therefore the W2007 compatibility mode) cannot read? PamC |
#8
Posted to microsoft.public.word.tables
|
|||
|
|||
"(Continued)" in Table and not in Table of Tables (Word 2007)
If you select an image that is not in a text box and then use insert caption,
Word will place the caption in a text box. If that's the case, you can convert the texbox to a frame (format text box text box tab convert to frame button). W2003 TOC can see information in frames. Note that I'm using W2007, so the names of dialogs, buttons, and tabs many be different. PamC CharlesM777 wrote: I've compared the format of the captions on "working" figures to "non-working" figures and they are the same. All captions were created with the Figure-caption option and not text boxes. Is there some other "hidden" information that Word 2007uses to build the TOF? If I take the document and load into Word 2003 then it builds the TOC correctly. However, in doing so I lose tons of document formatting... snip For item (3), could there be line feeds and not paragraph marks at the ends of your captions? Or are the captions in text boxes, which the TOC in W2003 (and therefore the W2007 compatibility mode) cannot read? PamC -- Message posted via http://www.officekb.com |
#9
Posted to microsoft.public.word.tables
|
|||
|
|||
"(Continued)" in Table and not in Table of Tables (Word 2007)
PamC, I'm confused. I'm pretty sure I am not using any text boxes. I am
trying to do the document in Word 2007; I only went back to Word 2003 as an experiment. I have the problem with two TOF - one for tables and one for Figures. In fact, some of the tables have the caption in the first row/cell of the table. Some show up in the TOF and some do not. "PamC via OfficeKB.com" wrote: If you select an image that is not in a text box and then use insert caption, Word will place the caption in a text box. If that's the case, you can convert the texbox to a frame (format text box text box tab convert to frame button). W2003 TOC can see information in frames. Note that I'm using W2007, so the names of dialogs, buttons, and tabs many be different. PamC snip |
#10
Posted to microsoft.public.word.tables
|
|||
|
|||
"(Continued)" in Table and not in Table of Tables (Word 2007)
In that case I'm stumped. I'd be happy to take a look at the fie, but I do
not have a dummy email address setup. If you have a way of getting it to me (with sensitive info removed), that might work. PamC CharlesM777 wrote: PamC, I'm confused. I'm pretty sure I am not using any text boxes. I am trying to do the document in Word 2007; I only went back to Word 2003 as an experiment. I have the problem with two TOF - one for tables and one for Figures. In fact, some of the tables have the caption in the first row/cell of the table. Some show up in the TOF and some do not. If you select an image that is not in a text box and then use insert caption, Word will place the caption in a text box. If that's the case, you can [quoted text clipped - 5 lines] PamC snip -- Message posted via OfficeKB.com http://www.officekb.com/Uwe/Forums.a...ables/200811/1 |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Table Titles -- How to repeat with "(continued)"? | Tables | |||
Table Captions and the Word "Continued" | Tables | |||
Stop tables from imposing "Table Grid" style?? | New Users | |||
Word should optionally use "Continued" with tables that span page. | Tables | |||
Let me add "Continued" to a table header row. | Tables |