Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to microsoft.public.word.docmanagement
Robert S[_2_] Robert S[_2_] is offline
external usenet poster
 
Posts: 1
Default Is it possible to rotate an entire page by 90 degrees?

I am trying to print a document on A5 sheets. Unfortunately the paper jams
in my printer because it is half the "standard" page width for my printer.
I would like to fix this by putting the page into the printer sideways, so
the bottom edge is the full width of the printer. In order to do this, I
would need to rotate the entire page by 90 degrees. Is this possible in
Word 2003? It doesn't look as if my printer has this capability.


  #2   Report Post  
Posted to microsoft.public.word.docmanagement
Jay Freedman Jay Freedman is offline
external usenet poster
 
Posts: 9,854
Default Is it possible to rotate an entire page by 90 degrees?

Robert S wrote:
I am trying to print a document on A5 sheets. Unfortunately the
paper jams in my printer because it is half the "standard" page width
for my printer. I would like to fix this by putting the page into the
printer sideways, so the bottom edge is the full width of the
printer. In order to do this, I would need to rotate the entire page
by 90 degrees. Is this possible in Word 2003? It doesn't look as if
my printer has this capability.


In the dialog at File Page Setup Layout, select Landscape orientation.

--
Regards,
Jay Freedman
Microsoft Word MVP FAQ: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.


  #3   Report Post  
Posted to microsoft.public.word.docmanagement
Suzanne S. Barnhill Suzanne S. Barnhill is offline
external usenet poster
 
Posts: 33,624
Default Is it possible to rotate an entire page by 90 degrees?

I'm not sure changing to Landscape orientation would help much since most
printers feed landscape documents in portrait orientation and just rotate
the print. You may, however, be able to fool Word into accepting a
"landscape" orientation with greater height than width (or a "portrait"
orientation with greater width than height, which is easier to think about).

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Jay Freedman" wrote in message
...
Robert S wrote:
I am trying to print a document on A5 sheets. Unfortunately the
paper jams in my printer because it is half the "standard" page width
for my printer. I would like to fix this by putting the page into the
printer sideways, so the bottom edge is the full width of the
printer. In order to do this, I would need to rotate the entire page
by 90 degrees. Is this possible in Word 2003? It doesn't look as if
my printer has this capability.


In the dialog at File Page Setup Layout, select Landscape orientation.

--
Regards,
Jay Freedman
Microsoft Word MVP FAQ: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup
so all may benefit.





  #4   Report Post  
Posted to microsoft.public.word.docmanagement
Jay Freedman Jay Freedman is offline
external usenet poster
 
Posts: 9,854
Default Is it possible to rotate an entire page by 90 degrees?

Thinking about this some more, I think both things are required. The
Landscape orientation rotates the page image 90 degrees, so the lines of
type will continue to be parallel to the short side of the paper when the
paper is physically turned. But you also need to swap the height and width
measurements of the paper in the Page Setup dialog (and possibly also in the
printer driver's paper size definition) so the print area will have the
proper size.

Suzanne S. Barnhill wrote:
I'm not sure changing to Landscape orientation would help much since
most printers feed landscape documents in portrait orientation and
just rotate the print. You may, however, be able to fool Word into
accepting a "landscape" orientation with greater height than width
(or a "portrait" orientation with greater width than height, which is
easier to think about).

"Jay Freedman" wrote in message
...
Robert S wrote:
I am trying to print a document on A5 sheets. Unfortunately the
paper jams in my printer because it is half the "standard" page
width for my printer. I would like to fix this by putting the page
into the printer sideways, so the bottom edge is the full width of
the printer. In order to do this, I would need to rotate the
entire page by 90 degrees. Is this possible in Word 2003? It
doesn't look as if my printer has this capability.


In the dialog at File Page Setup Layout, select Landscape
orientation. --
Regards,
Jay Freedman
Microsoft Word MVP FAQ: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so all may benefit.



  #5   Report Post  
Posted to microsoft.public.word.docmanagement
grammatim[_2_] grammatim[_2_] is offline
external usenet poster
 
Posts: 2,751
Default Is it possible to rotate an entire page by 90 degrees?

On May 6, 1:19*pm, "Jay Freedman" wrote:
Thinking about this some more, I think both things are required. The
Landscape orientation rotates the page image 90 degrees, so the lines of
type will continue to be parallel to the short side of the paper when the
paper is physically turned.


No it doesn't!

But you also need to swap the height and width
measurements of the paper in the Page Setup dialog (and possibly also in the
printer driver's paper size definition) so the print area will have the
proper size.



Suzanne S. Barnhill wrote:
I'm not sure changing to Landscape orientation would help much since
most printers feed landscape documents in portrait orientation and
just rotate the print. You may, however, be able to fool Word into
accepting a "landscape" orientation with greater height than width
(or a "portrait" orientation with greater width than height, which is
easier to think about).


"Jay Freedman" wrote in message
...
Robert S wrote:
I am trying to print a document on A5 sheets. *Unfortunately the
paper jams in my printer because it is half the "standard" page
width for my printer. I would like to fix this by putting the page
into the printer sideways, so the bottom edge is the full width of
the printer. *In order to do this, I would need to rotate the
entire page by 90 degrees. *Is this possible in Word 2003? *It
doesn't look as if my printer has this capability.


In the dialog at File Page Setup Layout, select Landscape
orientation. --
Regards,
Jay Freedman
Microsoft Word MVP * * * *FAQ:http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so all may benefit.- Hide quoted text -


- Show quoted text -




  #6   Report Post  
Posted to microsoft.public.word.docmanagement
Suzanne S. Barnhill Suzanne S. Barnhill is offline
external usenet poster
 
Posts: 33,624
Default Is it possible to rotate an entire page by 90 degrees?

Doesn't what?

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"grammatim" wrote in message
...
On May 6, 1:19 pm, "Jay Freedman" wrote:
Thinking about this some more, I think both things are required. The
Landscape orientation rotates the page image 90 degrees, so the lines of
type will continue to be parallel to the short side of the paper when the
paper is physically turned.


No it doesn't!

But you also need to swap the height and width
measurements of the paper in the Page Setup dialog (and possibly also in
the
printer driver's paper size definition) so the print area will have the
proper size.



Suzanne S. Barnhill wrote:
I'm not sure changing to Landscape orientation would help much since
most printers feed landscape documents in portrait orientation and
just rotate the print. You may, however, be able to fool Word into
accepting a "landscape" orientation with greater height than width
(or a "portrait" orientation with greater width than height, which is
easier to think about).


"Jay Freedman" wrote in message
...
Robert S wrote:
I am trying to print a document on A5 sheets. Unfortunately the
paper jams in my printer because it is half the "standard" page
width for my printer. I would like to fix this by putting the page
into the printer sideways, so the bottom edge is the full width of
the printer. In order to do this, I would need to rotate the
entire page by 90 degrees. Is this possible in Word 2003? It
doesn't look as if my printer has this capability.


In the dialog at File Page Setup Layout, select Landscape
orientation. --
Regards,
Jay Freedman
Microsoft Word MVP FAQ:http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so all may benefit.- Hide quoted text -


- Show quoted text -



Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How do I rotate an entire document to print 90 degrees sideways? kev_120 Page Layout 3 April 30th 23 02:51 AM
rotate an entire page Christine Fournier Page Layout 3 June 20th 07 10:53 PM
tables need to rotate with out rotating the entire page [email protected] Tables 3 October 10th 06 06:16 AM
Rotate Text 180 degrees Doug Mc New Users 12 September 5th 06 07:32 AM
How to rotate text box 60 degrees? rr Microsoft Word Help 1 January 9th 06 01:21 AM


All times are GMT +1. The time now is 09:27 AM.

Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Microsoft Office Word Forum - WordBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Word"