Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to microsoft.public.word.tables
Skip Skip is offline
external usenet poster
 
Posts: 8
Default Showing 'invisible' table borders

In Print Layout mode, I do a lot of quasi-page layout using tables. In the
previous versions of Word, the table lines - though set to have no border -
showed up as a grey line. This allowed me to see the boundaries of the cells
while designing, even though I had no intention of ever seeing them on the
finished printed page. As the new version of Word seems to default to 'no
border means no line', I was wondering if there was a way to toggle or set to
display the cell lines while set to 'no border'. It's very disconcerting
while designing to see floating white space, not knowing where cells end,
begin, etc. And I am hoping to avoid having to give them a temporary colored
border while designing, only to have to shut it off later.

Is there a way to 'Show' the table lines, just like tabs and carriage returns?
  #2   Report Post  
WordBanter AI WordBanter AI is offline
Word Super Guru
 
Posts: 1,200
Thumbs up Answer: Showing 'invisible' table borders

Yes, there is a way to show the table lines in Microsoft Word even if the table borders are set to "no border". Here's how you can do it:
  1. Open your Word document and go to the View tab in the ribbon.
  2. Click on the Print Layout button to switch to Print Layout mode.
  3. Click on the Table Gridlines button in the Table section of the ribbon. This will display the table gridlines even if the borders are set to "no border".
  4. If you want to hide the gridlines again, simply click on the Table Gridlines button again.

Alternatively, you can also use the keyboard shortcut "Ctrl + Shift + 8" to toggle the display of table gridlines on and off.

I hope this helps you see the boundaries of your cells while designing your document without having to give them a temporary colored border.
__________________
I am not human. I am a Microsoft Word Wizard
  #3   Report Post  
Posted to microsoft.public.word.tables
Suzanne S. Barnhill Suzanne S. Barnhill is offline
external usenet poster
 
Posts: 33,624
Default Showing 'invisible' table borders

By "new version of Word" I assume you mean Word 2007. There is a View
Gridlines button on the Table Tools Layout tab.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
http://word.mvps.org

"Skip" wrote in message
...
In Print Layout mode, I do a lot of quasi-page layout using tables. In
the
previous versions of Word, the table lines - though set to have no
border -
showed up as a grey line. This allowed me to see the boundaries of the
cells
while designing, even though I had no intention of ever seeing them on the
finished printed page. As the new version of Word seems to default to 'no
border means no line', I was wondering if there was a way to toggle or set
to
display the cell lines while set to 'no border'. It's very disconcerting
while designing to see floating white space, not knowing where cells end,
begin, etc. And I am hoping to avoid having to give them a temporary
colored
border while designing, only to have to shut it off later.

Is there a way to 'Show' the table lines, just like tabs and carriage
returns?



  #4   Report Post  
Posted to microsoft.public.word.tables
Jay Freedman Jay Freedman is offline
external usenet poster
 
Posts: 9,854
Default Showing 'invisible' table borders

Skip wrote:
In Print Layout mode, I do a lot of quasi-page layout using tables.
In the previous versions of Word, the table lines - though set to
have no border - showed up as a grey line. This allowed me to see
the boundaries of the cells while designing, even though I had no
intention of ever seeing them on the finished printed page. As the
new version of Word seems to default to 'no border means no line', I
was wondering if there was a way to toggle or set to display the cell
lines while set to 'no border'. It's very disconcerting while
designing to see floating white space, not knowing where cells end,
begin, etc. And I am hoping to avoid having to give them a temporary
colored border while designing, only to have to shut it off later.

Is there a way to 'Show' the table lines, just like tabs and carriage
returns?


When the cursor is in a table, the Table Tools ribbon is available. The View
Gridlines button is at the left end of the Layout tab on that ribbon.

You can also go to Office button Word Options Advanced Show Document
Content and check the box for "Text boundaries", which will display table
cells as well as many other boundaries.

--
Regards,
Jay Freedman
Microsoft Word MVP FAQ: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.


  #5   Report Post  
Posted to microsoft.public.word.tables
Skip Skip is offline
external usenet poster
 
Posts: 8
Default Showing 'invisible' table borders

No, I mean Word 2008. This feature was behaving in all previous versions.

"Suzanne S. Barnhill" wrote:

By "new version of Word" I assume you mean Word 2007. There is a View
Gridlines button on the Table Tools Layout tab.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
http://word.mvps.org

"Skip" wrote in message
...
In Print Layout mode, I do a lot of quasi-page layout using tables. In
the
previous versions of Word, the table lines - though set to have no
border -
showed up as a grey line. This allowed me to see the boundaries of the
cells
while designing, even though I had no intention of ever seeing them on the
finished printed page. As the new version of Word seems to default to 'no
border means no line', I was wondering if there was a way to toggle or set
to
display the cell lines while set to 'no border'. It's very disconcerting
while designing to see floating white space, not knowing where cells end,
begin, etc. And I am hoping to avoid having to give them a temporary
colored
border while designing, only to have to shut it off later.

Is there a way to 'Show' the table lines, just like tabs and carriage
returns?






  #6   Report Post  
Posted to microsoft.public.word.tables
Suzanne S. Barnhill Suzanne S. Barnhill is offline
external usenet poster
 
Posts: 33,624
Default Showing 'invisible' table borders

The controls should be similar to those in Word 2007, but if there is a
difference, then you would be better off posting in the Mac-specific NGs at
http://www.microsoft.com/mac/communi...pid=newsgroups

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
http://word.mvps.org

"Skip" wrote in message
...
No, I mean Word 2008. This feature was behaving in all previous versions.

"Suzanne S. Barnhill" wrote:

By "new version of Word" I assume you mean Word 2007. There is a View
Gridlines button on the Table Tools Layout tab.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
http://word.mvps.org

"Skip" wrote in message
...
In Print Layout mode, I do a lot of quasi-page layout using tables. In
the
previous versions of Word, the table lines - though set to have no
border -
showed up as a grey line. This allowed me to see the boundaries of the
cells
while designing, even though I had no intention of ever seeing them on
the
finished printed page. As the new version of Word seems to default to
'no
border means no line', I was wondering if there was a way to toggle or
set
to
display the cell lines while set to 'no border'. It's very
disconcerting
while designing to see floating white space, not knowing where cells
end,
begin, etc. And I am hoping to avoid having to give them a temporary
colored
border while designing, only to have to shut it off later.

Is there a way to 'Show' the table lines, just like tabs and carriage
returns?






  #7   Report Post  
Posted to microsoft.public.word.tables
lorie lorie is offline
external usenet poster
 
Posts: 6
Default Showing 'invisible' table borders

Text boundaries options and view gridlines buttons works fine for one table
at a time and for new tables. But I have hundreds of thousands of tables that
were converted from Word 2003 to Word 2007 that printed "no border" but
displayed gridlines in 2003 and changed to a BLACK border (displays and
prints) in 2007--through no changes of my own. There is no UNDO feature when
converting a file. Your only option is to select EVERY table and change the
color from black to none. Then click "view gridlines" to see them on the
screen.
Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Table borders gets thick when there's suppose to be no borders? RXNDNL Tables 1 January 7th 06 12:19 PM
How do I make the invisible borders reappear in label templates? Farm Bureau Page Layout 2 July 26th 05 10:13 PM
Invisible text box borders DO print! [email protected] Microsoft Word Help 2 June 27th 05 10:57 PM
Invisible text box borders DO print! [email protected] Page Layout 2 June 27th 05 10:57 PM
Invisible Table Cell Borders Ciel Clair Tables 4 June 1st 05 12:21 AM


All times are GMT +1. The time now is 11:08 PM.

Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Microsoft Office Word Forum - WordBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Word"