Reply
 
Thread Tools Display Modes
  #1   Report Post  
sali
 
Posts: n/a
Default landscape text & table on portrait page

i have report [mainly portrait format] having text pages on portrait, but
few tables, charts, etc, which naturaly need landscape orientation.
because of general portrait nature of document, i need *all* footers and
page numbering to be on bottom of portrait a4 format [bottom right corner].
putting a table on landscape, word rotates the whole page, so page number on
footer bottom right, becomes rotated number on top right after bibding
landscape printed pages to general portrait final document.

i hope i properly described problem.

question is how to make landscape on few pages just in *main* view,
reamining footer and header *untouched*, in portrait mode?
the perfect solution could be to have object into text box rotated for
90deg, but on text box property, rotate property is not available [grayed].

this is word2000 version.

thnx.


  #2   Report Post  
Shauna Kelly
 
Posts: n/a
Default

Hi Sali

See
How to put a portrait page number on a landscape page
http://www.word.mvps.org/FAQs/Format...apeSection.htm

Hope this helps.

Shauna Kelly. Microsoft MVP.
http://www.shaunakelly.com/word


"sali" wrote in message
...
i have report [mainly portrait format] having text pages on portrait, but
few tables, charts, etc, which naturaly need landscape orientation.
because of general portrait nature of document, i need *all* footers and
page numbering to be on bottom of portrait a4 format [bottom right
corner].
putting a table on landscape, word rotates the whole page, so page number
on footer bottom right, becomes rotated number on top right after bibding
landscape printed pages to general portrait final document.

i hope i properly described problem.

question is how to make landscape on few pages just in *main* view,
reamining footer and header *untouched*, in portrait mode?
the perfect solution could be to have object into text box rotated for
90deg, but on text box property, rotate property is not available
[grayed].

this is word2000 version.

thnx.




  #3   Report Post  
sali
 
Posts: n/a
Default

"Shauna Kelly" wrote in message
...
Hi Sali

See
How to put a portrait page number on a landscape page
http://www.word.mvps.org/FAQs/Format...apeSection.htm

Hope this helps.



thanks, it matches exactly!

but unfortunately, it just shows that "portrait page number on landscape
page" is not a subject somebody could advice as a matter of telephone
support!
if being such a complicated manouever, maybe the best is to provide vba
[word] macro to user?

again, thanks for the info.




Shauna Kelly. Microsoft MVP.
http://www.shaunakelly.com/word


"sali" wrote in message
...
i have report [mainly portrait format] having text pages on portrait, but
few tables, charts, etc, which naturaly need landscape orientation.
because of general portrait nature of document, i need *all* footers and
page numbering to be on bottom of portrait a4 format [bottom right
corner].
putting a table on landscape, word rotates the whole page, so page number
on footer bottom right, becomes rotated number on top right after bibding
landscape printed pages to general portrait final document.

i hope i properly described problem.

question is how to make landscape on few pages just in *main* view,
reamining footer and header *untouched*, in portrait mode?
the perfect solution could be to have object into text box rotated for
90deg, but on text box property, rotate property is not available
[grayed].

this is word2000 version.

thnx.






  #4   Report Post  
Suzanne S. Barnhill
 
Posts: n/a
Default

If you can write a macro that works, then this would be excellent.
Otherwise, why not point the user to that article?

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"sali" wrote in message
...
"Shauna Kelly" wrote in message
...
Hi Sali

See
How to put a portrait page number on a landscape page
http://www.word.mvps.org/FAQs/Format...apeSection.htm

Hope this helps.



thanks, it matches exactly!

but unfortunately, it just shows that "portrait page number on landscape
page" is not a subject somebody could advice as a matter of telephone
support!
if being such a complicated manouever, maybe the best is to provide vba
[word] macro to user?

again, thanks for the info.




Shauna Kelly. Microsoft MVP.
http://www.shaunakelly.com/word


"sali" wrote in message
...
i have report [mainly portrait format] having text pages on portrait,

but
few tables, charts, etc, which naturaly need landscape orientation.
because of general portrait nature of document, i need *all* footers

and
page numbering to be on bottom of portrait a4 format [bottom right
corner].
putting a table on landscape, word rotates the whole page, so page

number
on footer bottom right, becomes rotated number on top right after

bibding
landscape printed pages to general portrait final document.

i hope i properly described problem.

question is how to make landscape on few pages just in *main* view,
reamining footer and header *untouched*, in portrait mode?
the perfect solution could be to have object into text box rotated for
90deg, but on text box property, rotate property is not available
[grayed].

this is word2000 version.

thnx.







  #5   Report Post  
sali
 
Posts: n/a
Default

"Suzanne S. Barnhill" wrote in message
...
If you can write a macro that works, then this would be excellent.
Otherwise, why not point the user to that article?



of course, link is excellent, and article is very helpfull.
i use word from time to time [an know something about it], but was currious
how to obtain that specific customer's request.
without that article it is hard to know even how to start preparing macro.

but, here is a new question:
are there some tools [word vba properties, methods, objects ...] that may be
used for mentioned page numbering, and which are *not* exposed through user
interface [menus & dialogs] but just only directly through vba code?

thanks again.




--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup
so
all may benefit.

"sali" wrote in message
...
"Shauna Kelly" wrote in message
...
Hi Sali

See
How to put a portrait page number on a landscape page
http://www.word.mvps.org/FAQs/Format...apeSection.htm

Hope this helps.



thanks, it matches exactly!

but unfortunately, it just shows that "portrait page number on landscape
page" is not a subject somebody could advice as a matter of telephone
support!
if being such a complicated manouever, maybe the best is to provide vba
[word] macro to user?

again, thanks for the info.




Shauna Kelly. Microsoft MVP.
http://www.shaunakelly.com/word


"sali" wrote in message
...
i have report [mainly portrait format] having text pages on portrait,

but
few tables, charts, etc, which naturaly need landscape orientation.
because of general portrait nature of document, i need *all* footers

and
page numbering to be on bottom of portrait a4 format [bottom right
corner].
putting a table on landscape, word rotates the whole page, so page

number
on footer bottom right, becomes rotated number on top right after

bibding
landscape printed pages to general portrait final document.

i hope i properly described problem.

question is how to make landscape on few pages just in *main* view,
reamining footer and header *untouched*, in portrait mode?
the perfect solution could be to have object into text box rotated for
90deg, but on text box property, rotate property is not available
[grayed].

this is word2000 version.

thnx.











  #6   Report Post  
Margaret Aldis
 
Posts: n/a
Default

There's the bare bones of the macro method I use in an article I wrote for
the ISTC journal. See the end of the article he

http://www.syntagma.demon.co.uk/Arti...orkaround2.pdf

You still have to prepare a landscape format to match your portrait one, but
then save the section break that stores the landscape page set up as an
AutoText in the template. An "Insert Landscape Page" macro can then insert
the "protective" break at the current position, unlink the headers and
footers, and insert the stored landscape break.

--
Margaret Aldis - Microsoft Word MVP
Syntagma partnership site: http://www.syntagma.co.uk
Word MVP FAQ site: http://www.word.mvps.org


"sali" wrote in message
...
"Suzanne S. Barnhill" wrote in message
...
If you can write a macro that works, then this would be excellent.
Otherwise, why not point the user to that article?



of course, link is excellent, and article is very helpfull.
i use word from time to time [an know something about it], but was
currious how to obtain that specific customer's request.
without that article it is hard to know even how to start preparing macro.

but, here is a new question:
are there some tools [word vba properties, methods, objects ...] that may
be used for mentioned page numbering, and which are *not* exposed through
user interface [menus & dialogs] but just only directly through vba code?

thanks again.




--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup
so
all may benefit.

"sali" wrote in message
...
"Shauna Kelly" wrote in
message
...
Hi Sali

See
How to put a portrait page number on a landscape page
http://www.word.mvps.org/FAQs/Format...apeSection.htm

Hope this helps.


thanks, it matches exactly!

but unfortunately, it just shows that "portrait page number on landscape
page" is not a subject somebody could advice as a matter of telephone
support!
if being such a complicated manouever, maybe the best is to provide vba
[word] macro to user?

again, thanks for the info.




Shauna Kelly. Microsoft MVP.
http://www.shaunakelly.com/word


"sali" wrote in message
...
i have report [mainly portrait format] having text pages on portrait,

but
few tables, charts, etc, which naturaly need landscape orientation.
because of general portrait nature of document, i need *all* footers

and
page numbering to be on bottom of portrait a4 format [bottom right
corner].
putting a table on landscape, word rotates the whole page, so page

number
on footer bottom right, becomes rotated number on top right after

bibding
landscape printed pages to general portrait final document.

i hope i properly described problem.

question is how to make landscape on few pages just in *main* view,
reamining footer and header *untouched*, in portrait mode?
the perfect solution could be to have object into text box rotated
for
90deg, but on text box property, rotate property is not available
[grayed].

this is word2000 version.

thnx.











Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How do I avoid "white space" preceding a table that takes a page Ely Page Layout 1 April 27th 05 04:02 PM
header and page number portrait on landscape page? NP New Users 4 April 15th 05 02:42 PM
Transform text A4 portrait to A5 landscape? MilesG Page Layout 4 April 2nd 05 01:55 AM
Transform text A4 portrait to A5 landscape? MilesG Microsoft Word Help 2 April 2nd 05 01:39 AM
A problem with text boxes and free space on the page [email protected] New Users 3 January 4th 05 10:39 PM


All times are GMT +1. The time now is 09:00 AM.

Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Microsoft Office Word Forum - WordBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Word"