Home |
Search |
Today's Posts |
|
#1
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Potential MAJOR bug in KB969604?
KB969604 for Word 2007 was released on 6/8 and was installed on my machine a
couple days ago. Since then, any time I save a document in Word 2007, any document variables in the document become corrupt. If I uninstall KB969604 then the problem goes away. When I reinstall KB969604 the problem comes back. With KB969604 uninstalled, doc variables are properly saved in the settings.xml file as below: w:docVarsw:docVar w:name="MyVar" w:val="This is a test value for a variable"//w:docVars However, with KB969604 installed, doc variables become corrupted when saved. For example: w:docVarsw:docVar w:name="MyVar" w:val="d???_?????????Ä?????????????"//w:docVars We've been able to reproduce this on multiple machines. You can use the steps below to reproduce this: * See if this KB is installed (it was released on 6/8) ... if not, it can be installed from he http://www.microsoft.com/downloads/d...displaylang=en * Open a Word 2007 doc and create a doc variable ... you can do this by creating a simple macro from the Developer tab, then execute the macro ... the macro just needs to be this: Sub Macro1() ActiveDocument.Variables.Add Name:="MyVar", Value:="This is a test value for a variable" End Sub * Save and close your doc ... change the file extension to "zip" and unzip it ... open the "~/word/settings.xml" file and see if your variable is valid or not. * If it's corrupted, then uninstall the KB from Add/Remove programs (make sure the "Show updates" checkbox is selected at the top of the dialog). * Repeat the above steps with a new doc and see if your variable is corrupted. If this is a defect, then it's a major one as all doc variables become corrupted on save. Note that the variables only become corrupted on save ... in memory, the variables are fine ... it's only when the docx is written out that they become corrupted. Can others reproduce this? |
#3
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Potential MAJOR bug in KB969604?
Yes, it is known -- at least out here in the world outside the Microsoft campus.
We reported this bug last month when the suspect part of the update was available only as a hotfix (http://support.microsoft.com/kb/969961). That report is still open and unacknowledged. Despite that report, the hotfix evidently was rolled into the security update's general release. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. On Sat, 13 Jun 2009 19:26:01 -0700, ThirtySix Software ThirtySix wrote: KB969604 for Word 2007 was released on 6/8 and was installed on my machine a couple days ago. Since then, any time I save a document in Word 2007, any document variables in the document become corrupt. If I uninstall KB969604 then the problem goes away. When I reinstall KB969604 the problem comes back. With KB969604 uninstalled, doc variables are properly saved in the settings.xml file as below: w:docVarsw:docVar w:name="MyVar" w:val="This is a test value for a variable"//w:docVars However, with KB969604 installed, doc variables become corrupted when saved. For example: w:docVarsw:docVar w:name="MyVar" w:val="d???_?????????Ä?????????????"//w:docVars We've been able to reproduce this on multiple machines. You can use the steps below to reproduce this: * See if this KB is installed (it was released on 6/8) ... if not, it can be installed from he http://www.microsoft.com/downloads/d...displaylang=en * Open a Word 2007 doc and create a doc variable ... you can do this by creating a simple macro from the Developer tab, then execute the macro ... the macro just needs to be this: Sub Macro1() ActiveDocument.Variables.Add Name:="MyVar", Value:="This is a test value for a variable" End Sub * Save and close your doc ... change the file extension to "zip" and unzip it ... open the "~/word/settings.xml" file and see if your variable is valid or not. * If it's corrupted, then uninstall the KB from Add/Remove programs (make sure the "Show updates" checkbox is selected at the top of the dialog). * Repeat the above steps with a new doc and see if your variable is corrupted. If this is a defect, then it's a major one as all doc variables become corrupted on save. Note that the variables only become corrupted on save ... in memory, the variables are fine ... it's only when the docx is written out that they become corrupted. Can others reproduce this? |
#4
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Potential MAJOR bug in KB969604?
Suzanne/Jay - Thanks for the reply.
This really sucks, as we have add-ins that we have developed that rely on doc variables for data storage. Any recommendations for how we can push MS on this? Is there a defect logged out there somewhere that we can chime in on, as this will impact all of our clients. "Jay Freedman" wrote: Yes, it is known -- at least out here in the world outside the Microsoft campus. We reported this bug last month when the suspect part of the update was available only as a hotfix (http://support.microsoft.com/kb/969961). That report is still open and unacknowledged. Despite that report, the hotfix evidently was rolled into the security update's general release. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. On Sat, 13 Jun 2009 19:26:01 -0700, ThirtySix Software ThirtySix wrote: KB969604 for Word 2007 was released on 6/8 and was installed on my machine a couple days ago. Since then, any time I save a document in Word 2007, any document variables in the document become corrupt. If I uninstall KB969604 then the problem goes away. When I reinstall KB969604 the problem comes back. With KB969604 uninstalled, doc variables are properly saved in the settings.xml file as below: w:docVarsw:docVar w:name="MyVar" w:val="This is a test value for a variable"//w:docVars However, with KB969604 installed, doc variables become corrupted when saved. For example: w:docVarsw:docVar w:name="MyVar" w:val="d???_?????????Ä?????????????"//w:docVars We've been able to reproduce this on multiple machines. You can use the steps below to reproduce this: * See if this KB is installed (it was released on 6/8) ... if not, it can be installed from he http://www.microsoft.com/downloads/d...displaylang=en * Open a Word 2007 doc and create a doc variable ... you can do this by creating a simple macro from the Developer tab, then execute the macro ... the macro just needs to be this: Sub Macro1() ActiveDocument.Variables.Add Name:="MyVar", Value:="This is a test value for a variable" End Sub * Save and close your doc ... change the file extension to "zip" and unzip it ... open the "~/word/settings.xml" file and see if your variable is valid or not. * If it's corrupted, then uninstall the KB from Add/Remove programs (make sure the "Show updates" checkbox is selected at the top of the dialog). * Repeat the above steps with a new doc and see if your variable is corrupted. If this is a defect, then it's a major one as all doc variables become corrupted on save. Note that the variables only become corrupted on save ... in memory, the variables are fine ... it's only when the docx is written out that they become corrupted. Can others reproduce this? |
#5
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Potential MAJOR bug in KB969604?
You can try submitting a nastygram through
https://feedback.office.microsoft.co...ice2007&scrx=1. I don't know whether that goes to the same people who appear to be ignoring us. I have already added your post to the comments section of the existing report on the hotfix. I'll look for other ways to escalate the problem and at least get a response. On Sat, 13 Jun 2009 20:38:01 -0700, ThirtySix Software wrote: Suzanne/Jay - Thanks for the reply. This really sucks, as we have add-ins that we have developed that rely on doc variables for data storage. Any recommendations for how we can push MS on this? Is there a defect logged out there somewhere that we can chime in on, as this will impact all of our clients. "Jay Freedman" wrote: Yes, it is known -- at least out here in the world outside the Microsoft campus. We reported this bug last month when the suspect part of the update was available only as a hotfix (http://support.microsoft.com/kb/969961). That report is still open and unacknowledged. Despite that report, the hotfix evidently was rolled into the security update's general release. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. On Sat, 13 Jun 2009 19:26:01 -0700, ThirtySix Software ThirtySix wrote: KB969604 for Word 2007 was released on 6/8 and was installed on my machine a couple days ago. Since then, any time I save a document in Word 2007, any document variables in the document become corrupt. If I uninstall KB969604 then the problem goes away. When I reinstall KB969604 the problem comes back. With KB969604 uninstalled, doc variables are properly saved in the settings.xml file as below: w:docVarsw:docVar w:name="MyVar" w:val="This is a test value for a variable"//w:docVars However, with KB969604 installed, doc variables become corrupted when saved. For example: w:docVarsw:docVar w:name="MyVar" w:val="d???_?????????Ä?????????????"//w:docVars We've been able to reproduce this on multiple machines. You can use the steps below to reproduce this: * See if this KB is installed (it was released on 6/8) ... if not, it can be installed from he http://www.microsoft.com/downloads/d...displaylang=en * Open a Word 2007 doc and create a doc variable ... you can do this by creating a simple macro from the Developer tab, then execute the macro ... the macro just needs to be this: Sub Macro1() ActiveDocument.Variables.Add Name:="MyVar", Value:="This is a test value for a variable" End Sub * Save and close your doc ... change the file extension to "zip" and unzip it ... open the "~/word/settings.xml" file and see if your variable is valid or not. * If it's corrupted, then uninstall the KB from Add/Remove programs (make sure the "Show updates" checkbox is selected at the top of the dialog). * Repeat the above steps with a new doc and see if your variable is corrupted. If this is a defect, then it's a major one as all doc variables become corrupted on save. Note that the variables only become corrupted on save ... in memory, the variables are fine ... it's only when the docx is written out that they become corrupted. Can others reproduce this? |
#6
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Potential MAJOR bug in KB969604?
Maybe we should get as many people as possible to submit the following
feedback via https://feedback.office.microsoft.co...e2007&scrx=1.: Security Update KB969604 corrupts Document Variables! The impact of the bug is well stated in the thread starting with Message-ID: in microsoft.public.word.docmanagement ("Potential MAJOR bug in KB969604"). -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "Jay Freedman" wrote in message ... You can try submitting a nastygram through https://feedback.office.microsoft.co...ice2007&scrx=1. I don't know whether that goes to the same people who appear to be ignoring us. I have already added your post to the comments section of the existing report on the hotfix. I'll look for other ways to escalate the problem and at least get a response. On Sat, 13 Jun 2009 20:38:01 -0700, ThirtySix Software wrote: Suzanne/Jay - Thanks for the reply. This really sucks, as we have add-ins that we have developed that rely on doc variables for data storage. Any recommendations for how we can push MS on this? Is there a defect logged out there somewhere that we can chime in on, as this will impact all of our clients. "Jay Freedman" wrote: Yes, it is known -- at least out here in the world outside the Microsoft campus. We reported this bug last month when the suspect part of the update was available only as a hotfix (http://support.microsoft.com/kb/969961). That report is still open and unacknowledged. Despite that report, the hotfix evidently was rolled into the security update's general release. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. On Sat, 13 Jun 2009 19:26:01 -0700, ThirtySix Software ThirtySix wrote: KB969604 for Word 2007 was released on 6/8 and was installed on my machine a couple days ago. Since then, any time I save a document in Word 2007, any document variables in the document become corrupt. If I uninstall KB969604 then the problem goes away. When I reinstall KB969604 the problem comes back. With KB969604 uninstalled, doc variables are properly saved in the settings.xml file as below: w:docVarsw:docVar w:name="MyVar" w:val="This is a test value for a variable"//w:docVars However, with KB969604 installed, doc variables become corrupted when saved. For example: w:docVarsw:docVar w:name="MyVar" w:val="d???_?????????Ä?????????????"//w:docVars We've been able to reproduce this on multiple machines. You can use the steps below to reproduce this: * See if this KB is installed (it was released on 6/8) ... if not, it can be installed from he http://www.microsoft.com/downloads/d...displaylang=en * Open a Word 2007 doc and create a doc variable ... you can do this by creating a simple macro from the Developer tab, then execute the macro ... the macro just needs to be this: Sub Macro1() ActiveDocument.Variables.Add Name:="MyVar", Value:="This is a test value for a variable" End Sub * Save and close your doc ... change the file extension to "zip" and unzip it ... open the "~/word/settings.xml" file and see if your variable is valid or not. * If it's corrupted, then uninstall the KB from Add/Remove programs (make sure the "Show updates" checkbox is selected at the top of the dialog). * Repeat the above steps with a new doc and see if your variable is corrupted. If this is a defect, then it's a major one as all doc variables become corrupted on save. Note that the variables only become corrupted on save ... in memory, the variables are fine ... it's only when the docx is written out that they become corrupted. Can others reproduce this? |
#7
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Potential MAJOR bug in KB969604?
Thanks to all for the replies.
If anyone has a URL to an official bug/issue report that has been submitted to MS please let me know. I'd like to point some folks to this if possible. "Jay Freedman" wrote: You can try submitting a nastygram through https://feedback.office.microsoft.co...ice2007&scrx=1. I don't know whether that goes to the same people who appear to be ignoring us. I have already added your post to the comments section of the existing report on the hotfix. I'll look for other ways to escalate the problem and at least get a response. On Sat, 13 Jun 2009 20:38:01 -0700, ThirtySix Software wrote: Suzanne/Jay - Thanks for the reply. This really sucks, as we have add-ins that we have developed that rely on doc variables for data storage. Any recommendations for how we can push MS on this? Is there a defect logged out there somewhere that we can chime in on, as this will impact all of our clients. "Jay Freedman" wrote: Yes, it is known -- at least out here in the world outside the Microsoft campus. We reported this bug last month when the suspect part of the update was available only as a hotfix (http://support.microsoft.com/kb/969961). That report is still open and unacknowledged. Despite that report, the hotfix evidently was rolled into the security update's general release. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. On Sat, 13 Jun 2009 19:26:01 -0700, ThirtySix Software ThirtySix wrote: KB969604 for Word 2007 was released on 6/8 and was installed on my machine a couple days ago. Since then, any time I save a document in Word 2007, any document variables in the document become corrupt. If I uninstall KB969604 then the problem goes away. When I reinstall KB969604 the problem comes back. With KB969604 uninstalled, doc variables are properly saved in the settings.xml file as below: w:docVarsw:docVar w:name="MyVar" w:val="This is a test value for a variable"//w:docVars However, with KB969604 installed, doc variables become corrupted when saved. For example: w:docVarsw:docVar w:name="MyVar" w:val="d???_?????????Ä?????????????"//w:docVars We've been able to reproduce this on multiple machines. You can use the steps below to reproduce this: * See if this KB is installed (it was released on 6/8) ... if not, it can be installed from he http://www.microsoft.com/downloads/d...displaylang=en * Open a Word 2007 doc and create a doc variable ... you can do this by creating a simple macro from the Developer tab, then execute the macro ... the macro just needs to be this: Sub Macro1() ActiveDocument.Variables.Add Name:="MyVar", Value:="This is a test value for a variable" End Sub * Save and close your doc ... change the file extension to "zip" and unzip it ... open the "~/word/settings.xml" file and see if your variable is valid or not. * If it's corrupted, then uninstall the KB from Add/Remove programs (make sure the "Show updates" checkbox is selected at the top of the dialog). * Repeat the above steps with a new doc and see if your variable is corrupted. If this is a defect, then it's a major one as all doc variables become corrupted on save. Note that the variables only become corrupted on save ... in memory, the variables are fine ... it's only when the docx is written out that they become corrupted. Can others reproduce this? |
#8
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Potential MAJOR bug in KB969604?
Affecting us, too. Extremely serious. Anyone know how to beat on Microsoft's
door. "Jay Freedman" wrote: Yes, it is known -- at least out here in the world outside the Microsoft campus. We reported this bug last month when the suspect part of the update was available only as a hotfix (http://support.microsoft.com/kb/969961). That report is still open and unacknowledged. Despite that report, the hotfix evidently was rolled into the security update's general release. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. On Sat, 13 Jun 2009 19:26:01 -0700, ThirtySix Software ThirtySix wrote: KB969604 for Word 2007 was released on 6/8 and was installed on my machine a couple days ago. Since then, any time I save a document in Word 2007, any document variables in the document become corrupt. If I uninstall KB969604 then the problem goes away. When I reinstall KB969604 the problem comes back. With KB969604 uninstalled, doc variables are properly saved in the settings.xml file as below: w:docVarsw:docVar w:name="MyVar" w:val="This is a test value for a variable"//w:docVars However, with KB969604 installed, doc variables become corrupted when saved. For example: w:docVarsw:docVar w:name="MyVar" w:val="d???_?????????Ä?????????????"//w:docVars We've been able to reproduce this on multiple machines. You can use the steps below to reproduce this: * See if this KB is installed (it was released on 6/8) ... if not, it can be installed from he http://www.microsoft.com/downloads/d...displaylang=en * Open a Word 2007 doc and create a doc variable ... you can do this by creating a simple macro from the Developer tab, then execute the macro ... the macro just needs to be this: Sub Macro1() ActiveDocument.Variables.Add Name:="MyVar", Value:="This is a test value for a variable" End Sub * Save and close your doc ... change the file extension to "zip" and unzip it ... open the "~/word/settings.xml" file and see if your variable is valid or not. * If it's corrupted, then uninstall the KB from Add/Remove programs (make sure the "Show updates" checkbox is selected at the top of the dialog). * Repeat the above steps with a new doc and see if your variable is corrupted. If this is a defect, then it's a major one as all doc variables become corrupted on save. Note that the variables only become corrupted on save ... in memory, the variables are fine ... it's only when the docx is written out that they become corrupted. Can others reproduce this? |
#9
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Potential MAJOR bug in KB969604?
This is not a "Potential Major bug" it is very real and very Major. It will
be affecting 1000's of applications world wide. This update needs to be withdrawn by Microsoft immediately. "DavidP" wrote: Affecting us, too. Extremely serious. Anyone know how to beat on Microsoft's door. "Jay Freedman" wrote: Yes, it is known -- at least out here in the world outside the Microsoft campus. We reported this bug last month when the suspect part of the update was available only as a hotfix (http://support.microsoft.com/kb/969961). That report is still open and unacknowledged. Despite that report, the hotfix evidently was rolled into the security update's general release. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. On Sat, 13 Jun 2009 19:26:01 -0700, ThirtySix Software ThirtySix wrote: KB969604 for Word 2007 was released on 6/8 and was installed on my machine a couple days ago. Since then, any time I save a document in Word 2007, any document variables in the document become corrupt. If I uninstall KB969604 then the problem goes away. When I reinstall KB969604 the problem comes back. With KB969604 uninstalled, doc variables are properly saved in the settings.xml file as below: w:docVarsw:docVar w:name="MyVar" w:val="This is a test value for a variable"//w:docVars However, with KB969604 installed, doc variables become corrupted when saved. For example: w:docVarsw:docVar w:name="MyVar" w:val="d???_?????????Ä?????????????"//w:docVars We've been able to reproduce this on multiple machines. You can use the steps below to reproduce this: * See if this KB is installed (it was released on 6/8) ... if not, it can be installed from he http://www.microsoft.com/downloads/d...displaylang=en * Open a Word 2007 doc and create a doc variable ... you can do this by creating a simple macro from the Developer tab, then execute the macro ... the macro just needs to be this: Sub Macro1() ActiveDocument.Variables.Add Name:="MyVar", Value:="This is a test value for a variable" End Sub * Save and close your doc ... change the file extension to "zip" and unzip it ... open the "~/word/settings.xml" file and see if your variable is valid or not. * If it's corrupted, then uninstall the KB from Add/Remove programs (make sure the "Show updates" checkbox is selected at the top of the dialog). * Repeat the above steps with a new doc and see if your variable is corrupted. If this is a defect, then it's a major one as all doc variables become corrupted on save. Note that the variables only become corrupted on save ... in memory, the variables are fine ... it's only when the docx is written out that they become corrupted. Can others reproduce this? |
#10
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Potential MAJOR bug in KB969604?
FYI, I got this reply from MS on the Partner forum:
Dear Partner, Thank you for posting in our Partner Online Technical Community. From your description, I understand that any document variables in the document become corrupt after installing the update KB969604 for Word 2007. The document variables become normal after uninstalling the update KB969604. If there has been any misunderstanding, please let me know. I am sorry for any inconvenience you have encountered. According to the steps you listed, I am able to reproduce the issue after installing the update KB969604 on my test machine. To address your concern, I have sent an email to our Product Team to report this issue. In the meantime, you are also welcomed to provide your feedback directly to the product groups via the link below: https://support.microsoft.com/common...2fcontac t%2f If there is any update, I will post it in the community. -------------------------------------------------------------------------------- Best regards, Steven Du Partner Online Technical Community "Chris" wrote: This is not a "Potential Major bug" it is very real and very Major. It will be affecting 1000's of applications world wide. This update needs to be withdrawn by Microsoft immediately. "DavidP" wrote: Affecting us, too. Extremely serious. Anyone know how to beat on Microsoft's door. "Jay Freedman" wrote: Yes, it is known -- at least out here in the world outside the Microsoft campus. We reported this bug last month when the suspect part of the update was available only as a hotfix (http://support.microsoft.com/kb/969961). That report is still open and unacknowledged. Despite that report, the hotfix evidently was rolled into the security update's general release. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. On Sat, 13 Jun 2009 19:26:01 -0700, ThirtySix Software ThirtySix wrote: KB969604 for Word 2007 was released on 6/8 and was installed on my machine a couple days ago. Since then, any time I save a document in Word 2007, any document variables in the document become corrupt. If I uninstall KB969604 then the problem goes away. When I reinstall KB969604 the problem comes back. With KB969604 uninstalled, doc variables are properly saved in the settings.xml file as below: w:docVarsw:docVar w:name="MyVar" w:val="This is a test value for a variable"//w:docVars However, with KB969604 installed, doc variables become corrupted when saved. For example: w:docVarsw:docVar w:name="MyVar" w:val="d???_?????????Ä?????????????"//w:docVars We've been able to reproduce this on multiple machines. You can use the steps below to reproduce this: * See if this KB is installed (it was released on 6/8) ... if not, it can be installed from he http://www.microsoft.com/downloads/d...displaylang=en * Open a Word 2007 doc and create a doc variable ... you can do this by creating a simple macro from the Developer tab, then execute the macro ... the macro just needs to be this: Sub Macro1() ActiveDocument.Variables.Add Name:="MyVar", Value:="This is a test value for a variable" End Sub * Save and close your doc ... change the file extension to "zip" and unzip it ... open the "~/word/settings.xml" file and see if your variable is valid or not. * If it's corrupted, then uninstall the KB from Add/Remove programs (make sure the "Show updates" checkbox is selected at the top of the dialog). * Repeat the above steps with a new doc and see if your variable is corrupted. If this is a defect, then it's a major one as all doc variables become corrupted on save. Note that the variables only become corrupted on save ... in memory, the variables are fine ... it's only when the docx is written out that they become corrupted. Can others reproduce this? |
#11
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Potential MAJOR bug in KB969604?
Well, let's hope the PG will be more responsive to Steven Du's email than
they have been to the reports on Connect. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "ThirtySix Software" wrote in message ... FYI, I got this reply from MS on the Partner forum: Dear Partner, Thank you for posting in our Partner Online Technical Community. From your description, I understand that any document variables in the document become corrupt after installing the update KB969604 for Word 2007. The document variables become normal after uninstalling the update KB969604. If there has been any misunderstanding, please let me know. I am sorry for any inconvenience you have encountered. According to the steps you listed, I am able to reproduce the issue after installing the update KB969604 on my test machine. To address your concern, I have sent an email to our Product Team to report this issue. In the meantime, you are also welcomed to provide your feedback directly to the product groups via the link below: https://support.microsoft.com/common...2fcontac t%2f If there is any update, I will post it in the community. -------------------------------------------------------------------------------- Best regards, Steven Du Partner Online Technical Community "Chris" wrote: This is not a "Potential Major bug" it is very real and very Major. It will be affecting 1000's of applications world wide. This update needs to be withdrawn by Microsoft immediately. "DavidP" wrote: Affecting us, too. Extremely serious. Anyone know how to beat on Microsoft's door. "Jay Freedman" wrote: Yes, it is known -- at least out here in the world outside the Microsoft campus. We reported this bug last month when the suspect part of the update was available only as a hotfix (http://support.microsoft.com/kb/969961). That report is still open and unacknowledged. Despite that report, the hotfix evidently was rolled into the security update's general release. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. On Sat, 13 Jun 2009 19:26:01 -0700, ThirtySix Software ThirtySix wrote: KB969604 for Word 2007 was released on 6/8 and was installed on my machine a couple days ago. Since then, any time I save a document in Word 2007, any document variables in the document become corrupt. If I uninstall KB969604 then the problem goes away. When I reinstall KB969604 the problem comes back. With KB969604 uninstalled, doc variables are properly saved in the settings.xml file as below: w:docVarsw:docVar w:name="MyVar" w:val="This is a test value for a variable"//w:docVars However, with KB969604 installed, doc variables become corrupted when saved. For example: w:docVarsw:docVar w:name="MyVar" w:val="d???_?????????Ä?????????????"//w:docVars We've been able to reproduce this on multiple machines. You can use the steps below to reproduce this: * See if this KB is installed (it was released on 6/8) ... if not, it can be installed from he http://www.microsoft.com/downloads/d...displaylang=en * Open a Word 2007 doc and create a doc variable ... you can do this by creating a simple macro from the Developer tab, then execute the macro ... the macro just needs to be this: Sub Macro1() ActiveDocument.Variables.Add Name:="MyVar", Value:="This is a test value for a variable" End Sub * Save and close your doc ... change the file extension to "zip" and unzip it ... open the "~/word/settings.xml" file and see if your variable is valid or not. * If it's corrupted, then uninstall the KB from Add/Remove programs (make sure the "Show updates" checkbox is selected at the top of the dialog). * Repeat the above steps with a new doc and see if your variable is corrupted. If this is a defect, then it's a major one as all doc variables become corrupted on save. Note that the variables only become corrupted on save ... in memory, the variables are fine ... it's only when the docx is written out that they become corrupted. Can others reproduce this? |
#12
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Potential MAJOR bug in KB969604?
This issue has affected us as well. Our company created an add-in for Word 2007 for one of our clients; and this add-in uses document variables to store essential information. Because of KB969604, the add-in no longer works! Now, we had to revamp major sections in our code to get around this problem. "ThirtySix Software" wrote: KB969604 for Word 2007 was released on 6/8 and was installed on my machine a couple days ago. Since then, any time I save a document in Word 2007, any document variables in the document become corrupt. If I uninstall KB969604 then the problem goes away. When I reinstall KB969604 the problem comes back. With KB969604 uninstalled, doc variables are properly saved in the settings.xml file as below: w:docVarsw:docVar w:name="MyVar" w:val="This is a test value for a variable"//w:docVars However, with KB969604 installed, doc variables become corrupted when saved. For example: w:docVarsw:docVar w:name="MyVar" w:val="d???_?????????Ä?????????????"//w:docVars We've been able to reproduce this on multiple machines. You can use the steps below to reproduce this: * See if this KB is installed (it was released on 6/8) ... if not, it can be installed from he http://www.microsoft.com/downloads/d...displaylang=en * Open a Word 2007 doc and create a doc variable ... you can do this by creating a simple macro from the Developer tab, then execute the macro ... the macro just needs to be this: Sub Macro1() ActiveDocument.Variables.Add Name:="MyVar", Value:="This is a test value for a variable" End Sub * Save and close your doc ... change the file extension to "zip" and unzip it ... open the "~/word/settings.xml" file and see if your variable is valid or not. * If it's corrupted, then uninstall the KB from Add/Remove programs (make sure the "Show updates" checkbox is selected at the top of the dialog). * Repeat the above steps with a new doc and see if your variable is corrupted. If this is a defect, then it's a major one as all doc variables become corrupted on save. Note that the variables only become corrupted on save ... in memory, the variables are fine ... it's only when the docx is written out that they become corrupted. Can others reproduce this? |
#13
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Potential MAJOR bug in KB969604?
I'm not sure what other information is available for this. One of the other
work arounds is to save the document/template in Word 2003 ".doc" ".dot" format. It seems like it's only the Word 2007 document formats (docx, docm, dotx and dotm) that are affected. I realise that this impractical for many organisations. Could someone with the appropriate Microsoft contacts keep this tread updated so that we're aware of when a fix (other than removing KB969604) is available to this issue. Many thanks to all - Peter Hewett "ThirtySix Software" wrote: KB969604 for Word 2007 was released on 6/8 and was installed on my machine a couple days ago. Since then, any time I save a document in Word 2007, any document variables in the document become corrupt. If I uninstall KB969604 then the problem goes away. When I reinstall KB969604 the problem comes back. With KB969604 uninstalled, doc variables are properly saved in the settings.xml file as below: w:docVarsw:docVar w:name="MyVar" w:val="This is a test value for a variable"//w:docVars However, with KB969604 installed, doc variables become corrupted when saved. For example: w:docVarsw:docVar w:name="MyVar" w:val="d???_?????????Ä?????????????"//w:docVars We've been able to reproduce this on multiple machines. You can use the steps below to reproduce this: * See if this KB is installed (it was released on 6/8) ... if not, it can be installed from he http://www.microsoft.com/downloads/d...displaylang=en * Open a Word 2007 doc and create a doc variable ... you can do this by creating a simple macro from the Developer tab, then execute the macro ... the macro just needs to be this: Sub Macro1() ActiveDocument.Variables.Add Name:="MyVar", Value:="This is a test value for a variable" End Sub * Save and close your doc ... change the file extension to "zip" and unzip it ... open the "~/word/settings.xml" file and see if your variable is valid or not. * If it's corrupted, then uninstall the KB from Add/Remove programs (make sure the "Show updates" checkbox is selected at the top of the dialog). * Repeat the above steps with a new doc and see if your variable is corrupted. If this is a defect, then it's a major one as all doc variables become corrupted on save. Note that the variables only become corrupted on save ... in memory, the variables are fine ... it's only when the docx is written out that they become corrupted. Can others reproduce this? |
#14
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Potential MAJOR bug in KB969604?
Peter, you missed Graham Mayor's posts in this thread on 2 July:
http://support.microsoft.com/kb/970942/ Now tested - and it does appear to fix the problem with the variables. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. On Thu, 9 Jul 2009 17:32:01 -0700, Tont wrote: I'm not sure what other information is available for this. One of the other work arounds is to save the document/template in Word 2003 ".doc" ".dot" format. It seems like it's only the Word 2007 document formats (docx, docm, dotx and dotm) that are affected. I realise that this impractical for many organisations. Could someone with the appropriate Microsoft contacts keep this tread updated so that we're aware of when a fix (other than removing KB969604) is available to this issue. Many thanks to all - Peter Hewett |
#15
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Potential MAJOR bug in KB969604?
Note, however, that the hotfix does not "fix" any variables that have
already been corrupted. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA http://word.mvps.org "Jay Freedman" wrote in message ... Peter, you missed Graham Mayor's posts in this thread on 2 July: http://support.microsoft.com/kb/970942/ Now tested - and it does appear to fix the problem with the variables. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. On Thu, 9 Jul 2009 17:32:01 -0700, Tont wrote: I'm not sure what other information is available for this. One of the other work arounds is to save the document/template in Word 2003 ".doc" ".dot" format. It seems like it's only the Word 2007 document formats (docx, docm, dotx and dotm) that are affected. I realise that this impractical for many organisations. Could someone with the appropriate Microsoft contacts keep this tread updated so that we're aware of when a fix (other than removing KB969604) is available to this issue. Many thanks to all - Peter Hewett |
#16
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Potential MAJOR bug in KB969604?
I still wish someone would explain _why_ I should install SP2, which
is still sitting there in "Available Updates" labeled "important." What does it do? Then I would of course immediately install the hotfix. Or will there be an SP2A that fixes the problem in the first place? On Jul 9, 10:40*pm, "Suzanne S. Barnhill" wrote: Note, however, that the hotfix does not "fix" any variables that have already been corrupted. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USAhttp://word.mvps.org "Jay Freedman" wrote in message ... Peter, you missed Graham Mayor's posts in this thread on 2 July: http://support.microsoft.com/kb/970942/ Now tested - and it does appear to fix the problem with the variables. -- Regards, Jay Freedman Microsoft Word MVP * * * *FAQ:http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. On Thu, 9 Jul 2009 17:32:01 -0700, Tont wrote: I'm not sure what other information is available for this. *One of the other work arounds is to save the document/template in Word 2003 ".doc" ".dot" format. *It seems like it's only the Word 2007 document formats (docx, docm, dotx and dotm) that are affected. *I realise that this impractical for many organisations. Could someone with the appropriate Microsoft contacts keep this tread updated so that we're aware of when a fix (other than removing KB969604) is available to this issue. Many thanks to all - Peter Hewett- |
#17
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Potential MAJOR bug in KB969604?
Or will there be an SP2A that fixes the problem in the first place?
I am still waiting for any official word on this, but that, actually, is an interesting question to which I would guess the answer is no, but I don't know for sure. SP2 causes a problem. There is a hotfix. The hotfix causes a serious problem. There is another hotfix. So, you would need to install two hotfixes if the protected forms problem affected you. -- Enjoy, Tony www.WordArticles.com "Peter T. Daniels" wrote in message ... I still wish someone would explain _why_ I should install SP2, which is still sitting there in "Available Updates" labeled "important." What does it do? Then I would of course immediately install the hotfix. Or will there be an SP2A that fixes the problem in the first place? On Jul 9, 10:40 pm, "Suzanne S. Barnhill" wrote: Note, however, that the hotfix does not "fix" any variables that have already been corrupted. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USAhttp://word.mvps.org "Jay Freedman" wrote in message ... Peter, you missed Graham Mayor's posts in this thread on 2 July: http://support.microsoft.com/kb/970942/ Now tested - and it does appear to fix the problem with the variables. -- Regards, Jay Freedman Microsoft Word MVP FAQ:http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. On Thu, 9 Jul 2009 17:32:01 -0700, Tont wrote: I'm not sure what other information is available for this. One of the other work arounds is to save the document/template in Word 2003 ".doc" ".dot" format. It seems like it's only the Word 2007 document formats (docx, docm, dotx and dotm) that are affected. I realise that this impractical for many organisations. Could someone with the appropriate Microsoft contacts keep this tread updated so that we're aware of when a fix (other than removing KB969604) is available to this issue. Many thanks to all - Peter Hewett- |
#18
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Potential MAJOR bug in KB969604?
Cheers Jay
Your right, I missed Grahams response. KB970942 does seem to have resolved the issue. Apart from all the existing screwed documents! Cheers + All the best - Peter Glad to see there's still some Word MVP's around. "Jay Freedman" wrote: Peter, you missed Graham Mayor's posts in this thread on 2 July: http://support.microsoft.com/kb/970942/ Now tested - and it does appear to fix the problem with the variables. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. On Thu, 9 Jul 2009 17:32:01 -0700, Tont wrote: I'm not sure what other information is available for this. One of the other work arounds is to save the document/template in Word 2003 ".doc" ".dot" format. It seems like it's only the Word 2007 document formats (docx, docm, dotx and dotm) that are affected. I realise that this impractical for many organisations. Could someone with the appropriate Microsoft contacts keep this tread updated so that we're aware of when a fix (other than removing KB969604) is available to this issue. Many thanks to all - Peter Hewett |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Annoying "Read-Only" problem is back after KB969604 patch | Microsoft Word Help | |||
Major Printing Problem | Microsoft Word Help | |||
Discover How To Finally Unleash Your Computers True Potential! | Microsoft Word Help | |||
i would like help writing a letter to potential clients to promot | Microsoft Word Help | |||
disclosure of potential conflict of interest between employers | New Users |