Home |
Search |
Today's Posts |
#1
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
page layout
word 2003 when i start word up it starts with a horizontally split page that
is square and says that there are two pages per sheet. if I try to change it to normal it tells me 'increasing right margin causes last column to become too narrow in some sections having unevenly spaced columns' ok well it is not ok but there is only the one button to press. The only way I can get a A4 page in portrait is to load an old letter and wipe all the info. If I change the margins in the page set up box to the ones being used by the old page I've just uploaded it still gives me the previous note and refuses to go into normal A4 portrait. I have tried saving the made A4 page and exiting the word program with it up and clearing formats from the edit pull down, I have even wiped office off my computer and reloaded it but it is still the same. Can anyone shine a light on the problem please? -- Thanks Bob |
#2
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
page layout
Go to Format | Columns and click on the preset picture for One, OK. Then try
resetting the Page Setup. If this works in a single document, you'll need to make the change in Normal.dot (you can change the Page Setup using the Default... button in the dialog, but you have to open Normal.dot to make the change in the Columns dialog); see http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Bob" wrote in message ... word 2003 when i start word up it starts with a horizontally split page that is square and says that there are two pages per sheet. if I try to change it to normal it tells me 'increasing right margin causes last column to become too narrow in some sections having unevenly spaced columns' ok well it is not ok but there is only the one button to press. The only way I can get a A4 page in portrait is to load an old letter and wipe all the info. If I change the margins in the page set up box to the ones being used by the old page I've just uploaded it still gives me the previous note and refuses to go into normal A4 portrait. I have tried saving the made A4 page and exiting the word program with it up and clearing formats from the edit pull down, I have even wiped office off my computer and reloaded it but it is still the same. Can anyone shine a light on the problem please? -- Thanks Bob |
#3
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
page layout
Hi Bob! Did you harvest good answers? This bugs me too, other settings
similar didnt work, we use cm system here in Finland not pt and pt settings are screwed up, yours friendly Sara "Bob" kirjoitti: word 2003 when i start word up it starts with a horizontally split page that is square and says that there are two pages per sheet. if I try to change it to normal it tells me 'increasing right margin causes last column to become too narrow in some sections having unevenly spaced columns' ok well it is not ok but there is only the one button to press. The only way I can get a A4 page in portrait is to load an old letter and wipe all the info. If I change the margins in the page set up box to the ones being used by the old page I've just uploaded it still gives me the previous note and refuses to go into normal A4 portrait. I have tried saving the made A4 page and exiting the word program with it up and clearing formats from the edit pull down, I have even wiped office off my computer and reloaded it but it is still the same. Can anyone shine a light on the problem please? -- Thanks Bob |
#4
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
page layout
Did you read the reply by Suzanne S. Barnhill?
If you are also having problems with the unit of measurement, you may want to take a look at http://gmayor.com/Character_Units.htm. -- Stefan Blom Microsoft Word MVP "sarianne" wrote in message ... Hi Bob! Did you harvest good answers? This bugs me too, other settings similar didnt work, we use cm system here in Finland not pt and pt settings are screwed up, yours friendly Sara "Bob" kirjoitti: word 2003 when i start word up it starts with a horizontally split page that is square and says that there are two pages per sheet. if I try to change it to normal it tells me 'increasing right margin causes last column to become too narrow in some sections having unevenly spaced columns' ok well it is not ok but there is only the one button to press. The only way I can get a A4 page in portrait is to load an old letter and wipe all the info. If I change the margins in the page set up box to the ones being used by the old page I've just uploaded it still gives me the previous note and refuses to go into normal A4 portrait. I have tried saving the made A4 page and exiting the word program with it up and clearing formats from the edit pull down, I have even wiped office off my computer and reloaded it but it is still the same. Can anyone shine a light on the problem please? -- Thanks Bob |
#5
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
page layout
Hi Sarianne, no clear answer yet!
-- Thanks Bob "sarianne" wrote: Hi Bob! Did you harvest good answers? This bugs me too, other settings similar didnt work, we use cm system here in Finland not pt and pt settings are screwed up, yours friendly Sara "Bob" kirjoitti: word 2003 when i start word up it starts with a horizontally split page that is square and says that there are two pages per sheet. if I try to change it to normal it tells me 'increasing right margin causes last column to become too narrow in some sections having unevenly spaced columns' ok well it is not ok but there is only the one button to press. The only way I can get a A4 page in portrait is to load an old letter and wipe all the info. If I change the margins in the page set up box to the ones being used by the old page I've just uploaded it still gives me the previous note and refuses to go into normal A4 portrait. I have tried saving the made A4 page and exiting the word program with it up and clearing formats from the edit pull down, I have even wiped office off my computer and reloaded it but it is still the same. Can anyone shine a light on the problem please? -- Thanks Bob |
#6
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
page layout
Sorry Stefan I don't know how to access anything by Suzanne S. Barnhill she
hasn't sent a reply to me? -- Thanks Bob "Stefan Blom" wrote: Did you read the reply by Suzanne S. Barnhill? If you are also having problems with the unit of measurement, you may want to take a look at http://gmayor.com/Character_Units.htm. -- Stefan Blom Microsoft Word MVP "sarianne" wrote in message ... Hi Bob! Did you harvest good answers? This bugs me too, other settings similar didnt work, we use cm system here in Finland not pt and pt settings are screwed up, yours friendly Sara "Bob" kirjoitti: word 2003 when i start word up it starts with a horizontally split page that is square and says that there are two pages per sheet. if I try to change it to normal it tells me 'increasing right margin causes last column to become too narrow in some sections having unevenly spaced columns' ok well it is not ok but there is only the one button to press. The only way I can get a A4 page in portrait is to load an old letter and wipe all the info. If I change the margins in the page set up box to the ones being used by the old page I've just uploaded it still gives me the previous note and refuses to go into normal A4 portrait. I have tried saving the made A4 page and exiting the word program with it up and clearing formats from the edit pull down, I have even wiped office off my computer and reloaded it but it is still the same. Can anyone shine a light on the problem please? -- Thanks Bob |
#7
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
page layout
My reply, posted 23 minutes after your question, was:
Go to Format | Columns and click on the preset picture for One, OK. Then try resetting the Page Setup. If this works in a single document, you'll need to make the change in Normal.dot (you can change the Page Setup using the Default... button in the dialog, but you have to open Normal.dot to make the change in the Columns dialog); see http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Bob" wrote in message ... Sorry Stefan I don't know how to access anything by Suzanne S. Barnhill she hasn't sent a reply to me? -- Thanks Bob "Stefan Blom" wrote: Did you read the reply by Suzanne S. Barnhill? If you are also having problems with the unit of measurement, you may want to take a look at http://gmayor.com/Character_Units.htm. -- Stefan Blom Microsoft Word MVP "sarianne" wrote in message ... Hi Bob! Did you harvest good answers? This bugs me too, other settings similar didnt work, we use cm system here in Finland not pt and pt settings are screwed up, yours friendly Sara "Bob" kirjoitti: word 2003 when i start word up it starts with a horizontally split page that is square and says that there are two pages per sheet. if I try to change it to normal it tells me 'increasing right margin causes last column to become too narrow in some sections having unevenly spaced columns' ok well it is not ok but there is only the one button to press. The only way I can get a A4 page in portrait is to load an old letter and wipe all the info. If I change the margins in the page set up box to the ones being used by the old page I've just uploaded it still gives me the previous note and refuses to go into normal A4 portrait. I have tried saving the made A4 page and exiting the word program with it up and clearing formats from the edit pull down, I have even wiped office off my computer and reloaded it but it is still the same. Can anyone shine a light on the problem please? -- Thanks Bob |
#8
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
page layout
Hi Suzanne, I am sorry your first response isn't on my reply page but the
second one is and is a perfect answer to my problem thankyou for your time and the solution. I went to the web site you gave me and couldn't believe how easy it was. I was unaware that the document automatically loads NORMAL.DOT as your template but I have changed it and might even experiment with giving me different documents from there thanks again. -- Thanks Bob "Suzanne S. Barnhill" wrote: My reply, posted 23 minutes after your question, was: Go to Format | Columns and click on the preset picture for One, OK. Then try resetting the Page Setup. If this works in a single document, you'll need to make the change in Normal.dot (you can change the Page Setup using the Default... button in the dialog, but you have to open Normal.dot to make the change in the Columns dialog); see http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Bob" wrote in message ... Sorry Stefan I don't know how to access anything by Suzanne S. Barnhill she hasn't sent a reply to me? -- Thanks Bob "Stefan Blom" wrote: Did you read the reply by Suzanne S. Barnhill? If you are also having problems with the unit of measurement, you may want to take a look at http://gmayor.com/Character_Units.htm. -- Stefan Blom Microsoft Word MVP "sarianne" wrote in message ... Hi Bob! Did you harvest good answers? This bugs me too, other settings similar didnt work, we use cm system here in Finland not pt and pt settings are screwed up, yours friendly Sara "Bob" kirjoitti: word 2003 when i start word up it starts with a horizontally split page that is square and says that there are two pages per sheet. if I try to change it to normal it tells me 'increasing right margin causes last column to become too narrow in some sections having unevenly spaced columns' ok well it is not ok but there is only the one button to press. The only way I can get a A4 page in portrait is to load an old letter and wipe all the info. If I change the margins in the page set up box to the ones being used by the old page I've just uploaded it still gives me the previous note and refuses to go into normal A4 portrait. I have tried saving the made A4 page and exiting the word program with it up and clearing formats from the edit pull down, I have even wiped office off my computer and reloaded it but it is still the same. Can anyone shine a light on the problem please? -- Thanks Bob |
#9
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
page layout
Hi again Sarianne, I don't know for sure how this web site works yet. would
you do me a favour and tell me if you are able to read the reply I have been sent by Suzanne S Barnhill. If so you will see that it solves my problem perfectly, if not I will try to copy it to you -- Thanks Bob "Bob" wrote: Hi Sarianne, no clear answer yet! -- Thanks Bob "sarianne" wrote: Hi Bob! Did you harvest good answers? This bugs me too, other settings similar didnt work, we use cm system here in Finland not pt and pt settings are screwed up, yours friendly Sara "Bob" kirjoitti: word 2003 when i start word up it starts with a horizontally split page that is square and says that there are two pages per sheet. if I try to change it to normal it tells me 'increasing right margin causes last column to become too narrow in some sections having unevenly spaced columns' ok well it is not ok but there is only the one button to press. The only way I can get a A4 page in portrait is to load an old letter and wipe all the info. If I change the margins in the page set up box to the ones being used by the old page I've just uploaded it still gives me the previous note and refuses to go into normal A4 portrait. I have tried saving the made A4 page and exiting the word program with it up and clearing formats from the edit pull down, I have even wiped office off my computer and reloaded it but it is still the same. Can anyone shine a light on the problem please? -- Thanks Bob |
#10
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
page layout
Hi Stefan, thank you for your interest, for some reason Suzannes message
didn't get to me but with you highlighting it I put on the site that I had not seen her message and she sent it again, not only that but it solved my problem perfectly thanks to you for mentioning it. -- Thanks Bob "Stefan Blom" wrote: Did you read the reply by Suzanne S. Barnhill? If you are also having problems with the unit of measurement, you may want to take a look at http://gmayor.com/Character_Units.htm. -- Stefan Blom Microsoft Word MVP "sarianne" wrote in message ... Hi Bob! Did you harvest good answers? This bugs me too, other settings similar didnt work, we use cm system here in Finland not pt and pt settings are screwed up, yours friendly Sara "Bob" kirjoitti: word 2003 when i start word up it starts with a horizontally split page that is square and says that there are two pages per sheet. if I try to change it to normal it tells me 'increasing right margin causes last column to become too narrow in some sections having unevenly spaced columns' ok well it is not ok but there is only the one button to press. The only way I can get a A4 page in portrait is to load an old letter and wipe all the info. If I change the margins in the page set up box to the ones being used by the old page I've just uploaded it still gives me the previous note and refuses to go into normal A4 portrait. I have tried saving the made A4 page and exiting the word program with it up and clearing formats from the edit pull down, I have even wiped office off my computer and reloaded it but it is still the same. Can anyone shine a light on the problem please? -- Thanks Bob |
#11
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
page layout
Hi Sarianne, I have heard no more from you and don't know how else to contact
you please answer this and the last letter -- Thanks Bob "Bob" wrote: Hi again Sarianne, I don't know for sure how this web site works yet. would you do me a favour and tell me if you are able to read the reply I have been sent by Suzanne S Barnhill. If so you will see that it solves my problem perfectly, if not I will try to copy it to you -- Thanks Bob "Bob" wrote: Hi Sarianne, no clear answer yet! -- Thanks Bob "sarianne" wrote: Hi Bob! Did you harvest good answers? This bugs me too, other settings similar didnt work, we use cm system here in Finland not pt and pt settings are screwed up, yours friendly Sara "Bob" kirjoitti: word 2003 when i start word up it starts with a horizontally split page that is square and says that there are two pages per sheet. if I try to change it to normal it tells me 'increasing right margin causes last column to become too narrow in some sections having unevenly spaced columns' ok well it is not ok but there is only the one button to press. The only way I can get a A4 page in portrait is to load an old letter and wipe all the info. If I change the margins in the page set up box to the ones being used by the old page I've just uploaded it still gives me the previous note and refuses to go into normal A4 portrait. I have tried saving the made A4 page and exiting the word program with it up and clearing formats from the edit pull down, I have even wiped office off my computer and reloaded it but it is still the same. Can anyone shine a light on the problem please? -- Thanks Bob |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Using odd page bread to start a new chapter on an odd page | Microsoft Word Help | |||
Want to start page 1 numbering after five pages - how? | Page Layout | |||
section breaks change each time opening document | Microsoft Word Help | |||
preview odd number pages on the right and even on the left | Page Layout | |||
Copy and past a page and it's layout from one doc to another. | Microsoft Word Help |