Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to microsoft.public.word.newusers
John John is offline
external usenet poster
 
Posts: 307
Default This modification is not allowed because the selection is locked

I can open the document, but i can't type anything. I can't do anything with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....
  #2   Report Post  
Posted to microsoft.public.word.newusers
CyberTaz CyberTaz is offline
external usenet poster
 
Posts: 1,291
Default This modification is not allowed because the selection is locked

It sounds like you're in a Protected doc. Go to ToolsProtection & see if
there is a command in the submenu that reads as "Unprotect Document". If you
attempt to remove the protection you may be prompted for a password.

If this isn't the issue be sure to specify version info when you respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do anything
with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....



  #3   Report Post  
Posted to microsoft.public.word.newusers
John John is offline
external usenet poster
 
Posts: 307
Default This modification is not allowed because the selection is lock

I can't find Tools. where it is?

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to ToolsProtection & see if
there is a command in the submenu that reads as "Unprotect Document". If you
attempt to remove the protection you may be prompted for a password.

If this isn't the issue be sure to specify version info when you respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do anything
with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....




  #4   Report Post  
Posted to microsoft.public.word.newusers
John John is offline
external usenet poster
 
Posts: 307
Default This modification is not allowed because the selection is lock

I can't find Tools.
Where is it?

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to ToolsProtection & see if
there is a command in the submenu that reads as "Unprotect Document". If you
attempt to remove the protection you may be prompted for a password.

If this isn't the issue be sure to specify version info when you respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do anything
with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....




  #5   Report Post  
Posted to microsoft.public.word.newusers
Suzanne S. Barnhill Suzanne S. Barnhill is offline
external usenet poster
 
Posts: 33,624
Default This modification is not allowed because the selection is lock

Are you using Word 2007? In earlier versions, Tools is one of the items on
the Menu bar.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"John" wrote in message
...
I can't find Tools. where it is?

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to ToolsProtection & see

if
there is a command in the submenu that reads as "Unprotect Document". If

you
attempt to remove the protection you may be prompted for a password.

If this isn't the issue be sure to specify version info when you

respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do anything
with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....







  #6   Report Post  
Posted to microsoft.public.word.newusers
CyberTaz CyberTaz is offline
external usenet poster
 
Posts: 1,348
Default This modification is not allowed because the selection is lock

If using 2007, go to the Review Tab of the Ribbon if the Restrict Editing &
Formatting Task Pane isn't displayed. Then click the Protect Document icon
(right end of the Ribbon) & choose Restrict Editing & Formatting. At the
bottom of the pane click the Stop Protection button - if there is no
password require you will be allowed to revise the document. If prompted for
a password & you don't know what it is you can't make changes anywhere the
Find Next Region... And Show All Regions... Buttons highlight for you.

HTH |:)
Bob Jones
[MVP] Office:Mac



On 3/24/07 1:26 AM, in article
, "John"
wrote:

I can't find Tools.
Where is it?

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to ToolsProtection & see if
there is a command in the submenu that reads as "Unprotect Document". If you
attempt to remove the protection you may be prompted for a password.

If this isn't the issue be sure to specify version info when you respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do anything
with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....





  #7   Report Post  
Posted to microsoft.public.word.newusers
GS1150 GS1150 is offline
external usenet poster
 
Posts: 2
Default This modification is not allowed because the selection is lock

I have the same problem, I never locked it, and both Office and word are
doing the same thing. The computer is a dell, 1 week old,

any suggestions, the ribbon is totally locked, and I get this message,

This modification is not allowed because the selection is locked

thanks

"CyberTaz" wrote:

If using 2007, go to the Review Tab of the Ribbon if the Restrict Editing &
Formatting Task Pane isn't displayed. Then click the Protect Document icon
(right end of the Ribbon) & choose Restrict Editing & Formatting. At the
bottom of the pane click the Stop Protection button - if there is no
password require you will be allowed to revise the document. If prompted for
a password & you don't know what it is you can't make changes anywhere the
Find Next Region... And Show All Regions... Buttons highlight for you.

HTH |:)
Bob Jones
[MVP] Office:Mac



On 3/24/07 1:26 AM, in article
, "John"
wrote:

I can't find Tools.
Where is it?

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to ToolsProtection & see if
there is a command in the submenu that reads as "Unprotect Document". If you
attempt to remove the protection you may be prompted for a password.

If this isn't the issue be sure to specify version info when you respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do anything
with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....





  #8   Report Post  
Posted to microsoft.public.word.newusers
Terry Farrell Terry Farrell is offline
external usenet poster
 
Posts: 2,904
Default This modification is not allowed because the selection is lock

What computer, what OS, what version of Office. If it is Office 2007, has it
been activated? Is it trial version that has expired?

--
Terry Farrell - MS Word MVP

"GS1150" wrote in message
...
I have the same problem, I never locked it, and both Office and word are
doing the same thing. The computer is a dell, 1 week old,

any suggestions, the ribbon is totally locked, and I get this message,

This modification is not allowed because the selection is locked

thanks

"CyberTaz" wrote:

If using 2007, go to the Review Tab of the Ribbon if the Restrict Editing
&
Formatting Task Pane isn't displayed. Then click the Protect Document
icon
(right end of the Ribbon) & choose Restrict Editing & Formatting. At the
bottom of the pane click the Stop Protection button - if there is no
password require you will be allowed to revise the document. If prompted
for
a password & you don't know what it is you can't make changes anywhere
the
Find Next Region... And Show All Regions... Buttons highlight for you.

HTH |:)
Bob Jones
[MVP] Office:Mac



On 3/24/07 1:26 AM, in article
, "John"
wrote:

I can't find Tools.
Where is it?

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to ToolsProtection & see
if
there is a command in the submenu that reads as "Unprotect Document".
If you
attempt to remove the protection you may be prompted for a password.

If this isn't the issue be sure to specify version info when you
respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do
anything
with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....






  #9   Report Post  
Posted to microsoft.public.word.newusers
GS1150 GS1150 is offline
external usenet poster
 
Posts: 2
Default This modification is not allowed because the selection is lock

Its a dell, Vista, 2007, I activated it using the key number, then it locked
, then I reinstalled Office, and its still locked.

Thanks for you help

"Terry Farrell" wrote:

What computer, what OS, what version of Office. If it is Office 2007, has it
been activated? Is it trial version that has expired?

--
Terry Farrell - MS Word MVP

"GS1150" wrote in message
...
I have the same problem, I never locked it, and both Office and word are
doing the same thing. The computer is a dell, 1 week old,

any suggestions, the ribbon is totally locked, and I get this message,

This modification is not allowed because the selection is locked

thanks

"CyberTaz" wrote:

If using 2007, go to the Review Tab of the Ribbon if the Restrict Editing
&
Formatting Task Pane isn't displayed. Then click the Protect Document
icon
(right end of the Ribbon) & choose Restrict Editing & Formatting. At the
bottom of the pane click the Stop Protection button - if there is no
password require you will be allowed to revise the document. If prompted
for
a password & you don't know what it is you can't make changes anywhere
the
Find Next Region... And Show All Regions... Buttons highlight for you.

HTH |:)
Bob Jones
[MVP] Office:Mac



On 3/24/07 1:26 AM, in article
, "John"
wrote:

I can't find Tools.
Where is it?

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to ToolsProtection & see
if
there is a command in the submenu that reads as "Unprotect Document".
If you
attempt to remove the protection you may be prompted for a password.

If this isn't the issue be sure to specify version info when you
respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do
anything
with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....







  #10   Report Post  
Posted to microsoft.public.word.newusers
Terry Farrell Terry Farrell is offline
external usenet poster
 
Posts: 2,904
Default This modification is not allowed because the selection is lock

The 'number key' only allows you to install the applications, not activate:
you need to use on line Activation. Use Alt+F, I, then select Resources
button and Activate.

Terry

"GS1150" wrote in message
...
Its a dell, Vista, 2007, I activated it using the key number, then it
locked
, then I reinstalled Office, and its still locked.

Thanks for you help

"Terry Farrell" wrote:

What computer, what OS, what version of Office. If it is Office 2007, has
it
been activated? Is it trial version that has expired?

--
Terry Farrell - MS Word MVP

"GS1150" wrote in message
...
I have the same problem, I never locked it, and both Office and word are
doing the same thing. The computer is a dell, 1 week old,

any suggestions, the ribbon is totally locked, and I get this message,

This modification is not allowed because the selection is locked

thanks

"CyberTaz" wrote:

If using 2007, go to the Review Tab of the Ribbon if the Restrict
Editing
&
Formatting Task Pane isn't displayed. Then click the Protect Document
icon
(right end of the Ribbon) & choose Restrict Editing & Formatting. At
the
bottom of the pane click the Stop Protection button - if there is no
password require you will be allowed to revise the document. If
prompted
for
a password & you don't know what it is you can't make changes anywhere
the
Find Next Region... And Show All Regions... Buttons highlight for you.

HTH |:)
Bob Jones
[MVP] Office:Mac



On 3/24/07 1:26 AM, in article
, "John"
wrote:

I can't find Tools.
Where is it?

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to ToolsProtection &
see
if
there is a command in the submenu that reads as "Unprotect
Document".
If you
attempt to remove the protection you may be prompted for a
password.

If this isn't the issue be sure to specify version info when you
respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do
anything
with
it. The bottom it says "This modification is not allowed because
the
"selection" is locked."

please answer me....










  #11   Report Post  
Posted to microsoft.public.word.newusers
Bennito Bennito is offline
external usenet poster
 
Posts: 1
Default This modification is not allowed because the selection is lock

HELLO!
I have the same problem. My Office 2007 is "locked".
I also can't click anything in the Tabs. Only the Office button works to
open or save doc's. I can't type & I can't click on Review, to change
settings at all!
-I DID download this office- (it's not bought in a store) could that be the
problem?
THX a bunch.
Bennito

"Terry Farrell" wrote:

The 'number key' only allows you to install the applications, not activate:
you need to use on line Activation. Use Alt+F, I, then select Resources
button and Activate.

Terry

"GS1150" wrote in message
...
Its a dell, Vista, 2007, I activated it using the key number, then it
locked
, then I reinstalled Office, and its still locked.

Thanks for you help

"Terry Farrell" wrote:

What computer, what OS, what version of Office. If it is Office 2007, has
it
been activated? Is it trial version that has expired?

--
Terry Farrell - MS Word MVP

"GS1150" wrote in message
...
I have the same problem, I never locked it, and both Office and word are
doing the same thing. The computer is a dell, 1 week old,

any suggestions, the ribbon is totally locked, and I get this message,

This modification is not allowed because the selection is locked

thanks

"CyberTaz" wrote:

If using 2007, go to the Review Tab of the Ribbon if the Restrict
Editing
&
Formatting Task Pane isn't displayed. Then click the Protect Document
icon
(right end of the Ribbon) & choose Restrict Editing & Formatting. At
the
bottom of the pane click the Stop Protection button - if there is no
password require you will be allowed to revise the document. If
prompted
for
a password & you don't know what it is you can't make changes anywhere
the
Find Next Region... And Show All Regions... Buttons highlight for you.

HTH |:)
Bob Jones
[MVP] Office:Mac



On 3/24/07 1:26 AM, in article
, "John"
wrote:

I can't find Tools.
Where is it?

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to ToolsProtection &
see
if
there is a command in the submenu that reads as "Unprotect
Document".
If you
attempt to remove the protection you may be prompted for a
password.

If this isn't the issue be sure to specify version info when you
respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do
anything
with
it. The bottom it says "This modification is not allowed because
the
"selection" is locked."

please answer me....









  #12   Report Post  
Posted to microsoft.public.word.newusers
Suzanne S. Barnhill Suzanne S. Barnhill is offline
external usenet poster
 
Posts: 33,624
Default This modification is not allowed because the selection is lock

If you downloaded it, it is just a trial version, and it has probably
expired.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Bennito" wrote in message
...
HELLO!
I have the same problem. My Office 2007 is "locked".
I also can't click anything in the Tabs. Only the Office button works to
open or save doc's. I can't type & I can't click on Review, to change
settings at all!
-I DID download this office- (it's not bought in a store) could that be

the
problem?
THX a bunch.
Bennito

"Terry Farrell" wrote:

The 'number key' only allows you to install the applications, not

activate:
you need to use on line Activation. Use Alt+F, I, then select Resources
button and Activate.

Terry

"GS1150" wrote in message
...
Its a dell, Vista, 2007, I activated it using the key number, then it
locked
, then I reinstalled Office, and its still locked.

Thanks for you help

"Terry Farrell" wrote:

What computer, what OS, what version of Office. If it is Office 2007,

has
it
been activated? Is it trial version that has expired?

--
Terry Farrell - MS Word MVP

"GS1150" wrote in message
...
I have the same problem, I never locked it, and both Office and word

are
doing the same thing. The computer is a dell, 1 week old,

any suggestions, the ribbon is totally locked, and I get this

message,

This modification is not allowed because the selection is locked

thanks

"CyberTaz" wrote:

If using 2007, go to the Review Tab of the Ribbon if the Restrict
Editing
&
Formatting Task Pane isn't displayed. Then click the Protect

Document
icon
(right end of the Ribbon) & choose Restrict Editing & Formatting.

At
the
bottom of the pane click the Stop Protection button - if there is

no
password require you will be allowed to revise the document. If
prompted
for
a password & you don't know what it is you can't make changes

anywhere
the
Find Next Region... And Show All Regions... Buttons highlight for

you.

HTH |:)
Bob Jones
[MVP] Office:Mac



On 3/24/07 1:26 AM, in article
, "John"
wrote:

I can't find Tools.
Where is it?

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to

ToolsProtection &
see
if
there is a command in the submenu that reads as "Unprotect
Document".
If you
attempt to remove the protection you may be prompted for a
password.

If this isn't the issue be sure to specify version info when

you
respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do
anything
with
it. The bottom it says "This modification is not allowed

because
the
"selection" is locked."

please answer me....










  #13   Report Post  
Posted to microsoft.public.word.newusers
Pk-t112 Pk-t112 is offline
external usenet poster
 
Posts: 1
Default This modification is not allowed because the selection is lock

I also am getting this message. I have a 3 week old Gateway, Vista Home
Premium, Word 2007. I did activate the trial version using the product key,
and it has not expired yet. I keep getting a message reminding me that I will
need to buy the full version and can do it through the internet
(recommended). For today, I just want to do my work, and am having the same
problem as previous posts. THe task bars are locked, I can not type anything.

"Suzanne S. Barnhill" wrote:

If you downloaded it, it is just a trial version, and it has probably
expired.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Bennito" wrote in message
...
HELLO!
I have the same problem. My Office 2007 is "locked".
I also can't click anything in the Tabs. Only the Office button works to
open or save doc's. I can't type & I can't click on Review, to change
settings at all!
-I DID download this office- (it's not bought in a store) could that be

the
problem?
THX a bunch.
Bennito

"Terry Farrell" wrote:

The 'number key' only allows you to install the applications, not

activate:
you need to use on line Activation. Use Alt+F, I, then select Resources
button and Activate.

Terry

"GS1150" wrote in message
...
Its a dell, Vista, 2007, I activated it using the key number, then it
locked
, then I reinstalled Office, and its still locked.

Thanks for you help

"Terry Farrell" wrote:

What computer, what OS, what version of Office. If it is Office 2007,

has
it
been activated? Is it trial version that has expired?

--
Terry Farrell - MS Word MVP

"GS1150" wrote in message
...
I have the same problem, I never locked it, and both Office and word

are
doing the same thing. The computer is a dell, 1 week old,

any suggestions, the ribbon is totally locked, and I get this

message,

This modification is not allowed because the selection is locked

thanks

"CyberTaz" wrote:

If using 2007, go to the Review Tab of the Ribbon if the Restrict
Editing
&
Formatting Task Pane isn't displayed. Then click the Protect

Document
icon
(right end of the Ribbon) & choose Restrict Editing & Formatting.

At
the
bottom of the pane click the Stop Protection button - if there is

no
password require you will be allowed to revise the document. If
prompted
for
a password & you don't know what it is you can't make changes

anywhere
the
Find Next Region... And Show All Regions... Buttons highlight for

you.

HTH |:)
Bob Jones
[MVP] Office:Mac



On 3/24/07 1:26 AM, in article
, "John"
wrote:

I can't find Tools.
Where is it?

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to

ToolsProtection &
see
if
there is a command in the submenu that reads as "Unprotect
Document".
If you
attempt to remove the protection you may be prompted for a
password.

If this isn't the issue be sure to specify version info when

you
respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do
anything
with
it. The bottom it says "This modification is not allowed

because
the
"selection" is locked."

please answer me....











  #14   Report Post  
Posted to microsoft.public.word.newusers
Terry Farrell Terry Farrell is offline
external usenet poster
 
Posts: 2,904
Default This modification is not allowed because the selection is lock

It is definitely a symptom that it has expired.

--
Terry Farrell - MS Word MVP

"Pk-t112" wrote in message
...
I also am getting this message. I have a 3 week old Gateway, Vista Home
Premium, Word 2007. I did activate the trial version using the product
key,
and it has not expired yet. I keep getting a message reminding me that I
will
need to buy the full version and can do it through the internet
(recommended). For today, I just want to do my work, and am having the
same
problem as previous posts. THe task bars are locked, I can not type
anything.

"Suzanne S. Barnhill" wrote:

If you downloaded it, it is just a trial version, and it has probably
expired.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup
so
all may benefit.

"Bennito" wrote in message
...
HELLO!
I have the same problem. My Office 2007 is "locked".
I also can't click anything in the Tabs. Only the Office button works
to
open or save doc's. I can't type & I can't click on Review, to change
settings at all!
-I DID download this office- (it's not bought in a store) could that be

the
problem?
THX a bunch.
Bennito

"Terry Farrell" wrote:

The 'number key' only allows you to install the applications, not

activate:
you need to use on line Activation. Use Alt+F, I, then select
Resources
button and Activate.

Terry

"GS1150" wrote in message
...
Its a dell, Vista, 2007, I activated it using the key number, then
it
locked
, then I reinstalled Office, and its still locked.

Thanks for you help

"Terry Farrell" wrote:

What computer, what OS, what version of Office. If it is Office
2007,

has
it
been activated? Is it trial version that has expired?

--
Terry Farrell - MS Word MVP

"GS1150" wrote in message
...
I have the same problem, I never locked it, and both Office and
word

are
doing the same thing. The computer is a dell, 1 week old,

any suggestions, the ribbon is totally locked, and I get this

message,

This modification is not allowed because the selection is locked

thanks

"CyberTaz" wrote:

If using 2007, go to the Review Tab of the Ribbon if the
Restrict
Editing
&
Formatting Task Pane isn't displayed. Then click the Protect

Document
icon
(right end of the Ribbon) & choose Restrict Editing &
Formatting.

At
the
bottom of the pane click the Stop Protection button - if there
is

no
password require you will be allowed to revise the document. If
prompted
for
a password & you don't know what it is you can't make changes

anywhere
the
Find Next Region... And Show All Regions... Buttons highlight
for

you.

HTH |:)
Bob Jones
[MVP] Office:Mac



On 3/24/07 1:26 AM, in article
, "John"
wrote:

I can't find Tools.
Where is it?

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to

ToolsProtection &
see
if
there is a command in the submenu that reads as "Unprotect
Document".
If you
attempt to remove the protection you may be prompted for a
password.

If this isn't the issue be sure to specify version info when

you
respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't
do
anything
with
it. The bottom it says "This modification is not allowed

because
the
"selection" is locked."

please answer me....












  #15   Report Post  
Posted to microsoft.public.word.newusers
CyberTaz CyberTaz is offline
external usenet poster
 
Posts: 1,348
Default This modification is not allowed because the selection is lock

The clock starts when the trial version is *installed* not when the user
"gets around" to activating it.

Regards |:)
Bob Jones
[MVP] Office:Mac



On 4/22/07 8:20 AM, in article
, "Pk-t112"
wrote:

I also am getting this message. I have a 3 week old Gateway, Vista Home
Premium, Word 2007. I did activate the trial version using the product key,
and it has not expired yet. I keep getting a message reminding me that I will
need to buy the full version and can do it through the internet
(recommended). For today, I just want to do my work, and am having the same
problem as previous posts. THe task bars are locked, I can not type anything.

"Suzanne S. Barnhill" wrote:

If you downloaded it, it is just a trial version, and it has probably
expired.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site:
http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Bennito" wrote in message
...
HELLO!
I have the same problem. My Office 2007 is "locked".
I also can't click anything in the Tabs. Only the Office button works to
open or save doc's. I can't type & I can't click on Review, to change
settings at all!
-I DID download this office- (it's not bought in a store) could that be

the
problem?
THX a bunch.
Bennito

"Terry Farrell" wrote:

The 'number key' only allows you to install the applications, not

activate:
you need to use on line Activation. Use Alt+F, I, then select Resources
button and Activate.

Terry

"GS1150" wrote in message
...
Its a dell, Vista, 2007, I activated it using the key number, then it
locked
, then I reinstalled Office, and its still locked.

Thanks for you help

"Terry Farrell" wrote:

What computer, what OS, what version of Office. If it is Office 2007,

has
it
been activated? Is it trial version that has expired?

--
Terry Farrell - MS Word MVP

"GS1150" wrote in message
...
I have the same problem, I never locked it, and both Office and word

are
doing the same thing. The computer is a dell, 1 week old,

any suggestions, the ribbon is totally locked, and I get this

message,

This modification is not allowed because the selection is locked

thanks

"CyberTaz" wrote:

If using 2007, go to the Review Tab of the Ribbon if the Restrict
Editing
&
Formatting Task Pane isn't displayed. Then click the Protect

Document
icon
(right end of the Ribbon) & choose Restrict Editing & Formatting.

At
the
bottom of the pane click the Stop Protection button - if there is

no
password require you will be allowed to revise the document. If
prompted
for
a password & you don't know what it is you can't make changes

anywhere
the
Find Next Region... And Show All Regions... Buttons highlight for

you.

HTH |:)
Bob Jones
[MVP] Office:Mac



On 3/24/07 1:26 AM, in article
, "John"
wrote:

I can't find Tools.
Where is it?

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to

ToolsProtection &
see
if
there is a command in the submenu that reads as "Unprotect
Document".
If you
attempt to remove the protection you may be prompted for a
password.

If this isn't the issue be sure to specify version info when

you
respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do
anything
with
it. The bottom it says "This modification is not allowed

because
the
"selection" is locked."

please answer me....














  #16   Report Post  
Posted to microsoft.public.word.newusers
LittleMama LittleMama is offline
external usenet poster
 
Posts: 6
Default This modification is not allowed because the selection is lock



"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to ToolsProtection & see if
there is a command in the submenu that reads as "Unprotect Document". If you
attempt to remove the protection you may be prompted for a password.

If this isn't the issue be sure to specify version info when you respond.
Hi Cyber Taz:


There is no ToolsProtection area on my page. I have Window Vista Basic and
that option is not available. All of the options on the taskbar are greyed
out, even the Protect Document tab.

Any help is appreciated.
--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do anything
with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....




  #17   Report Post  
Posted to microsoft.public.word.newusers
JoAnn Paules JoAnn Paules is offline
external usenet poster
 
Posts: 4,241
Default This modification is not allowed because the selection is lock

If this is the same issue you posted in the other newsgroup, please stick to
ONE post for the issue. You'll drive yourself nuts trying to find all of the
responses.

--
JoAnn Paules
MVP Microsoft [Publisher]

~~~~~
How to ask a question
http://support.microsoft.com/KB/555375


"LittleMama" wrote in message
...


"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to ToolsProtection & see if
there is a command in the submenu that reads as "Unprotect Document". If
you
attempt to remove the protection you may be prompted for a password.

If this isn't the issue be sure to specify version info when you respond.
Hi Cyber Taz:


There is no ToolsProtection area on my page. I have Window Vista Basic
and
that option is not available. All of the options on the taskbar are
greyed
out, even the Protect Document tab.

Any help is appreciated.
--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do anything
with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....






  #18   Report Post  
Posted to microsoft.public.word.newusers
zildjian zildjian is offline
external usenet poster
 
Posts: 1
Default This modification is not allowed because the selection is locked

I just wanted to add that I had this problem and I actually had to activate
the software twice before it started my trial period.

"John" wrote:

I can open the document, but i can't type anything. I can't do anything with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....

  #19   Report Post  
Posted to microsoft.public.word.newusers
Shami Shami is offline
external usenet poster
 
Posts: 1
Default This modification is not allowed because the selection is lock

i bought this program so the time is not out or any thing still it says this
modification is not allowed because the selection i locked..

"CyberTaz" wrote:

The clock starts when the trial version is *installed* not when the user
"gets around" to activating it.

Regards |:)
Bob Jones
[MVP] Office:Mac



On 4/22/07 8:20 AM, in article
, "Pk-t112"
wrote:

I also am getting this message. I have a 3 week old Gateway, Vista Home
Premium, Word 2007. I did activate the trial version using the product key,
and it has not expired yet. I keep getting a message reminding me that I will
need to buy the full version and can do it through the internet
(recommended). For today, I just want to do my work, and am having the same
problem as previous posts. THe task bars are locked, I can not type anything.

"Suzanne S. Barnhill" wrote:

If you downloaded it, it is just a trial version, and it has probably
expired.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site:
http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Bennito" wrote in message
...
HELLO!
I have the same problem. My Office 2007 is "locked".
I also can't click anything in the Tabs. Only the Office button works to
open or save doc's. I can't type & I can't click on Review, to change
settings at all!
-I DID download this office- (it's not bought in a store) could that be
the
problem?
THX a bunch.
Bennito

"Terry Farrell" wrote:

The 'number key' only allows you to install the applications, not
activate:
you need to use on line Activation. Use Alt+F, I, then select Resources
button and Activate.

Terry

"GS1150" wrote in message
...
Its a dell, Vista, 2007, I activated it using the key number, then it
locked
, then I reinstalled Office, and its still locked.

Thanks for you help

"Terry Farrell" wrote:

What computer, what OS, what version of Office. If it is Office 2007,
has
it
been activated? Is it trial version that has expired?

--
Terry Farrell - MS Word MVP

"GS1150" wrote in message
...
I have the same problem, I never locked it, and both Office and word
are
doing the same thing. The computer is a dell, 1 week old,

any suggestions, the ribbon is totally locked, and I get this
message,

This modification is not allowed because the selection is locked

thanks

"CyberTaz" wrote:

If using 2007, go to the Review Tab of the Ribbon if the Restrict
Editing
&
Formatting Task Pane isn't displayed. Then click the Protect
Document
icon
(right end of the Ribbon) & choose Restrict Editing & Formatting.
At
the
bottom of the pane click the Stop Protection button - if there is
no
password require you will be allowed to revise the document. If
prompted
for
a password & you don't know what it is you can't make changes
anywhere
the
Find Next Region... And Show All Regions... Buttons highlight for
you.

HTH |:)
Bob Jones
[MVP] Office:Mac



On 3/24/07 1:26 AM, in article
, "John"
wrote:

I can't find Tools.
Where is it?

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to
ToolsProtection &
see
if
there is a command in the submenu that reads as "Unprotect
Document".
If you
attempt to remove the protection you may be prompted for a
password.

If this isn't the issue be sure to specify version info when
you
respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do
anything
with
it. The bottom it says "This modification is not allowed
because
the
"selection" is locked."

please answer me....













  #20   Report Post  
Posted to microsoft.public.word.newusers
Herb Tyson [MVP] Herb Tyson [MVP] is offline
external usenet poster
 
Posts: 2,936
Default This modification is not allowed because the selection is lock

Have you activated the copy?

Other than activation/expiration, you can also lock text by selecting it and
clicking Group - Group in the Developer tab. Try selecting everything and
choose Group - Ungroup... assuming it's not an activation issue.

--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com
"Shami" wrote in message
...
i bought this program so the time is not out or any thing still it says
this
modification is not allowed because the selection i locked..

"CyberTaz" wrote:

The clock starts when the trial version is *installed* not when the user
"gets around" to activating it.

Regards |:)
Bob Jones
[MVP] Office:Mac



On 4/22/07 8:20 AM, in article
, "Pk-t112"
wrote:

I also am getting this message. I have a 3 week old Gateway, Vista Home
Premium, Word 2007. I did activate the trial version using the product
key,
and it has not expired yet. I keep getting a message reminding me that
I will
need to buy the full version and can do it through the internet
(recommended). For today, I just want to do my work, and am having the
same
problem as previous posts. THe task bars are locked, I can not type
anything.

"Suzanne S. Barnhill" wrote:

If you downloaded it, it is just a trial version, and it has probably
expired.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site:
http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so
all may benefit.

"Bennito" wrote in message
...
HELLO!
I have the same problem. My Office 2007 is "locked".
I also can't click anything in the Tabs. Only the Office button works
to
open or save doc's. I can't type & I can't click on Review, to change
settings at all!
-I DID download this office- (it's not bought in a store) could that
be
the
problem?
THX a bunch.
Bennito

"Terry Farrell" wrote:

The 'number key' only allows you to install the applications, not
activate:
you need to use on line Activation. Use Alt+F, I, then select
Resources
button and Activate.

Terry

"GS1150" wrote in message
...
Its a dell, Vista, 2007, I activated it using the key number, then
it
locked
, then I reinstalled Office, and its still locked.

Thanks for you help

"Terry Farrell" wrote:

What computer, what OS, what version of Office. If it is Office
2007,
has
it
been activated? Is it trial version that has expired?

--
Terry Farrell - MS Word MVP

"GS1150" wrote in message
...
I have the same problem, I never locked it, and both Office and
word
are
doing the same thing. The computer is a dell, 1 week old,

any suggestions, the ribbon is totally locked, and I get this
message,

This modification is not allowed because the selection is locked

thanks

"CyberTaz" wrote:

If using 2007, go to the Review Tab of the Ribbon if the
Restrict
Editing
&
Formatting Task Pane isn't displayed. Then click the Protect
Document
icon
(right end of the Ribbon) & choose Restrict Editing &
Formatting.
At
the
bottom of the pane click the Stop Protection button - if there
is
no
password require you will be allowed to revise the document. If
prompted
for
a password & you don't know what it is you can't make changes
anywhere
the
Find Next Region... And Show All Regions... Buttons highlight
for
you.

HTH |:)
Bob Jones
[MVP] Office:Mac



On 3/24/07 1:26 AM, in article
, "John"
wrote:

I can't find Tools.
Where is it?

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to
ToolsProtection &
see
if
there is a command in the submenu that reads as "Unprotect
Document".
If you
attempt to remove the protection you may be prompted for a
password.

If this isn't the issue be sure to specify version info when
you
respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't
do
anything
with
it. The bottom it says "This modification is not allowed
because
the
"selection" is locked."

please answer me....
















  #21   Report Post  
Posted to microsoft.public.word.newusers
Debbie Debbie is offline
external usenet poster
 
Posts: 82
Default This modification is not allowed because the selection is lock

I went to "review" but the whole taskbar is grayed out and I can't do
anything at all.

"CyberTaz" wrote:

If using 2007, go to the Review Tab of the Ribbon if the Restrict Editing &
Formatting Task Pane isn't displayed. Then click the Protect Document icon
(right end of the Ribbon) & choose Restrict Editing & Formatting. At the
bottom of the pane click the Stop Protection button - if there is no
password require you will be allowed to revise the document. If prompted for
a password & you don't know what it is you can't make changes anywhere the
Find Next Region... And Show All Regions... Buttons highlight for you.

HTH |:)
Bob Jones
[MVP] Office:Mac



On 3/24/07 1:26 AM, in article
, "John"
wrote:

I can't find Tools.
Where is it?

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to ToolsProtection & see if
there is a command in the submenu that reads as "Unprotect Document". If you
attempt to remove the protection you may be prompted for a password.

If this isn't the issue be sure to specify version info when you respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do anything
with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....





  #22   Report Post  
Posted to microsoft.public.word.newusers
cal10 cal10 is offline
external usenet poster
 
Posts: 1
Default This modification is not allowed because the selection is lock

If I go to Review then Protect
the only thing it allows me to do it minimise the ribbon.. This is 2007 vista.

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to ToolsProtection & see if
there is a command in the submenu that reads as "Unprotect Document". If you
attempt to remove the protection you may be prompted for a password.

If this isn't the issue be sure to specify version info when you respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do anything
with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....




  #23   Report Post  
Posted to microsoft.public.word.newusers
chitpopo85 chitpopo85 is offline
external usenet poster
 
Posts: 1
Default This modification is not allowed because the selection is lock



"Terry Farrell" wrote:

The 'number key' only allows you to install the applications, not activate:
you need to use on line Activation. Use Alt+F, I, then select Resources
button and Activate.

Terry

"GS1150" wrote in message
...
Its a dell, Vista, 2007, I activated it using the key number, then it
locked
, then I reinstalled Office, and its still locked.

Thanks for you help

"Terry Farrell" wrote:

What computer, what OS, what version of Office. If it is Office 2007, has
it
been activated? Is it trial version that has expired?

--
Terry Farrell - MS Word MVP

"GS1150" wrote in message
...
I have the same problem, I never locked it, and both Office and word are
doing the same thing. The computer is a dell, 1 week old,

any suggestions, the ribbon is totally locked, and I get this message,

This modification is not allowed because the selection is locked

thanks

"CyberTaz" wrote:

If using 2007, go to the Review Tab of the Ribbon if the Restrict
Editing
&
Formatting Task Pane isn't displayed. Then click the Protect Document
icon
(right end of the Ribbon) & choose Restrict Editing & Formatting. At
the
bottom of the pane click the Stop Protection button - if there is no
password require you will be allowed to revise the document. If
prompted
for
a password & you don't know what it is you can't make changes anywhere
the
Find Next Region... And Show All Regions... Buttons highlight for you.

HTH |:)
Bob Jones
[MVP] Office:Mac



On 3/24/07 1:26 AM, in article
, "John"
wrote:

I can't find Tools.
Where is it?

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to ToolsProtection &
see
if
there is a command in the submenu that reads as "Unprotect
Document".
If you
attempt to remove the protection you may be prompted for a
password.

If this isn't the issue be sure to specify version info when you
respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do
anything
with
it. The bottom it says "This modification is not allowed because
the
"selection" is locked."

please answer me....








I cannot find tool. Where is tool menu.

pls help me.

  #24   Report Post  
Posted to microsoft.public.word.newusers
Gordon Gordon is offline
external usenet poster
 
Posts: 304
Default This modification is not allowed because the selection is lock

"chitpopo85" wrote in message
...


"Terry Farrell" wrote:

The 'number key' only allows you to install the applications, not
activate:
you need to use on line Activation. Use Alt+F, I, then select Resources
button and Activate.

Terry

"GS1150" wrote in message
...
Its a dell, Vista, 2007, I activated it using the key number, then it
locked
, then I reinstalled Office, and its still locked.

Thanks for you help

"Terry Farrell" wrote:

What computer, what OS, what version of Office. If it is Office 2007,
has
it
been activated? Is it trial version that has expired?

--
Terry Farrell - MS Word MVP

"GS1150" wrote in message
...
I have the same problem, I never locked it, and both Office and word
are
doing the same thing. The computer is a dell, 1 week old,

any suggestions, the ribbon is totally locked, and I get this
message,

This modification is not allowed because the selection is locked

thanks

"CyberTaz" wrote:

If using 2007, go to the Review Tab of the Ribbon if the Restrict
Editing
&
Formatting Task Pane isn't displayed. Then click the Protect
Document
icon
(right end of the Ribbon) & choose Restrict Editing & Formatting.
At
the
bottom of the pane click the Stop Protection button - if there is
no
password require you will be allowed to revise the document. If
prompted
for
a password & you don't know what it is you can't make changes
anywhere
the
Find Next Region... And Show All Regions... Buttons highlight for
you.

HTH |:)
Bob Jones
[MVP] Office:Mac



On 3/24/07 1:26 AM, in article
, "John"
wrote:

I can't find Tools.
Where is it?

"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to ToolsProtection
&
see
if
there is a command in the submenu that reads as "Unprotect
Document".
If you
attempt to remove the protection you may be prompted for a
password.

If this isn't the issue be sure to specify version info when you
respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do
anything
with
it. The bottom it says "This modification is not allowed
because
the
"selection" is locked."

please answer me....








I cannot find tool. Where is tool menu.

pls help me.



If you read the WHOLE post to which you replied, then you will find the
answer.


  #25   Report Post  
Posted to microsoft.public.word.newusers
selection is locked selection is locked is offline
external usenet poster
 
Posts: 1
Default This modification is not allowed because the selection is locked

no am not able to do anything on ms word because selection is locked

"John" wrote:

I can open the document, but i can't type anything. I can't do anything with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....



  #26   Report Post  
Posted to microsoft.public.word.newusers
Graham Mayor Graham Mayor is offline
external usenet poster
 
Posts: 19,312
Default This modification is not allowed because the selection is locked

Your office 2007 trial has expired. Time to buy the product!

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



selection is locked wrote:
no am not able to do anything on ms word because selection is locked

"John" wrote:

I can open the document, but i can't type anything. I can't do
anything with it. The bottom it says "This modification is not
allowed because the "selection" is locked."

please answer me....



  #27   Report Post  
Posted to microsoft.public.word.newusers
lil miss fashion lil miss fashion is offline
external usenet poster
 
Posts: 1
Default This modification is not allowed because the selection is locked


"John" wrote:

I can open the document, but i can't type anything. I can't do anything with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....

SO IM HAVING THE SAME ISSUE BUT EVERYTHING ON MY MICROSOFT IS UN HIGH
LIGHTED SO I CANT EVEN CLICK ON THE TOOLS BUTTON SO WHAT DO I DO NOW?! PLEASE
HELP

  #28   Report Post  
Posted to microsoft.public.word.newusers
Terry Farrell Terry Farrell is offline
external usenet poster
 
Posts: 2,904
Default This modification is not allowed because the selection is locked

Assuming you have Word 2007, either you have not activated the product or it
is a trial version that has time expired.

--
Terry Farrell - MSWord MVP

"lil miss fashion" wrote in
message ...

"John" wrote:

I can open the document, but i can't type anything. I can't do anything
with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....

SO IM HAVING THE SAME ISSUE BUT EVERYTHING ON MY MICROSOFT IS UN HIGH
LIGHTED SO I CANT EVEN CLICK ON THE TOOLS BUTTON SO WHAT DO I DO NOW?!
PLEASE
HELP

  #29   Report Post  
Posted to microsoft.public.word.newusers
moodymare moodymare is offline
external usenet poster
 
Posts: 1
Default This modification is not allowed because the selection is lock



"CyberTaz" wrote:

It sounds like you're in a Protected doc. Go to ToolsProtection & see if
there is a command in the submenu that reads as "Unprotect Document". If you
attempt to remove the protection you may be prompted for a password.

If this isn't the issue be sure to specify version info when you respond.

--
HTH |:)
Bob Jones
[MVP] Office:Mac

"John" wrote in message
...
I can open the document, but i can't type anything. I can't do anything
with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....


I have an acer laptop- 3 months old- purchased from John Lewis with Office
already loaded and the same thing is happening suddenly. Can read but not
create or modify docs in power point and word 2007. cannot get into the
control bar to get anything to work. it keeps asking for a product code.



  #30   Report Post  
Posted to microsoft.public.word.newusers
Gordon[_4_] Gordon[_4_] is offline
external usenet poster
 
Posts: 239
Default This modification is not allowed because the selection is lock

moodymare wrote:


I have an acer laptop- 3 months old- purchased from John Lewis with Office
already loaded and the same thing is happening suddenly. Can read but not
create or modify docs in power point and word 2007. cannot get into the
control bar to get anything to work. it keeps asking for a product code.


I assume your laptop came with a TRIAL version of Office which has now
expired. You either need to buy a licence, (or more cheaply) buy a
retail copy.


  #31   Report Post  
Posted to microsoft.public.word.newusers
Mahirb Mahirb is offline
external usenet poster
 
Posts: 1
Default This modification is not allowed because the selection is locked

I have the same problem and I just got my laptop less than 2 weeks ago.

"John" wrote:

I can open the document, but i can't type anything. I can't do anything with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....

  #32   Report Post  
Posted to microsoft.public.word.newusers
Doug Robbins - Word MVP Doug Robbins - Word MVP is offline
external usenet poster
 
Posts: 8,832
Default This modification is not allowed because the selection is locked

It sounds like you probably have a trial vesion of the software that has
expired or being activated.

--
Hope this helps,

Doug Robbins - Word MVP

Please reply only to the newsgroups unless you wish to obtain my services on
a paid professional basis.

"Mahirb" wrote in message
...
I have the same problem and I just got my laptop less than 2 weeks ago.

"John" wrote:

I can open the document, but i can't type anything. I can't do anything
with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....


  #33   Report Post  
Posted to microsoft.public.word.newusers
jdc jdc is offline
external usenet poster
 
Posts: 3
Default This modification is not allowed because the selection is lock

The consensus here seems to be that locked software means the trial has
expired. Several posts have noted the software is behaving like it is expired
when it was just installed.

What should a user do who has just downloaded, installed and activated the
trial yet MS Word is locked and will not unlock?

By the way, excel works fine. Also, per a previous post I attempted to
activate twice. No joy. When I do Alt-F, I and select Activate, it says the
trial is good until March 31, 2010.

Please anyone:
How can this obvious MS Office bug be fixed or worked around?


Thanks,
jdc

"Doug Robbins - Word MVP" wrote:

It sounds like you probably have a trial vesion of the software that has
expired or being activated.

--
Hope this helps,

Doug Robbins - Word MVP

Please reply only to the newsgroups unless you wish to obtain my services on
a paid professional basis.

"Mahirb" wrote in message
...
I have the same problem and I just got my laptop less than 2 weeks ago.

"John" wrote:

I can open the document, but i can't type anything. I can't do anything
with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....


  #34   Report Post  
Posted to microsoft.public.word.newusers
Terry Farrell Terry Farrell is offline
external usenet poster
 
Posts: 2,904
Default This modification is not allowed because the selection is lock

When you installed it, was your PC set to the current date and time? Was a
trial version installed on it previously?

--
Terry Farrell - MSWord MVP

"jdc" wrote in message
...
The consensus here seems to be that locked software means the trial has
expired. Several posts have noted the software is behaving like it is
expired
when it was just installed.

What should a user do who has just downloaded, installed and activated the
trial yet MS Word is locked and will not unlock?

By the way, excel works fine. Also, per a previous post I attempted to
activate twice. No joy. When I do Alt-F, I and select Activate, it says
the
trial is good until March 31, 2010.

Please anyone:
How can this obvious MS Office bug be fixed or worked around?


Thanks,
jdc

"Doug Robbins - Word MVP" wrote:

It sounds like you probably have a trial vesion of the software that has
expired or being activated.

--
Hope this helps,

Doug Robbins - Word MVP

Please reply only to the newsgroups unless you wish to obtain my services
on
a paid professional basis.

"Mahirb" wrote in message
...
I have the same problem and I just got my laptop less than 2 weeks ago.

"John" wrote:

I can open the document, but i can't type anything. I can't do
anything
with
it. The bottom it says "This modification is not allowed because the
"selection" is locked."

please answer me....


Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
This modification is not allowed because the document is locked Rob Microsoft Word Help 1 July 21st 06 03:40 PM
This modification is not allowed because the document is locked Mark60 Microsoft Word Help 13 March 6th 06 11:06 PM
this modification is not allowed, because the document is locked Kandi Holcombe Microsoft Word Help 1 October 4th 05 02:20 AM
"This modification is not allowed because the document is locked. Sai Microsoft Word Help 1 March 15th 05 05:12 AM
modification is not allowed because the document is locked SuzieB Microsoft Word Help 1 November 24th 04 08:45 PM


All times are GMT +1. The time now is 11:13 PM.

Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Microsoft Office Word Forum - WordBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Word"