Home |
Search |
Today's Posts |
#1
Posted to microsoft.public.word.newusers
|
|||
|
|||
word 2007, there's a back slash on screen
when opening word, there's a back slash (\) on screen, how can it permanently
go away. |
#2
Posted to microsoft.public.word.newusers
|
|||
|
|||
word 2007, there's a back slash on screen
If it's on your screen, try a gentle cleaner and a soft cloth.
If it's in your blank Word document, http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm -- JoAnn Paules MVP Microsoft [Publisher] Tech Editor for "Microsoft Publisher 2007 For Dummies" "spinndiva" wrote in message ... when opening word, there's a back slash (\) on screen, how can it permanently go away. |
#3
Posted to microsoft.public.word.newusers
|
|||
|
|||
word 2007, there's a back slash on screen
thank you for the response. it seem that i can't resolve the issue. i have
word 2007 and some of the resolutions say, "if you have 2000 and/or earlier or 2002. can you help. thank you much. "JoAnn Paules" wrote: If it's on your screen, try a gentle cleaner and a soft cloth. If it's in your blank Word document, http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm -- JoAnn Paules MVP Microsoft [Publisher] Tech Editor for "Microsoft Publisher 2007 For Dummies" "spinndiva" wrote in message ... when opening word, there's a back slash (\) on screen, how can it permanently go away. |
#4
Posted to microsoft.public.word.newusers
|
|||
|
|||
word 2007, there's a back slash on screen
Follow those directions - it's my understanding they do work.
-- JoAnn Paules MVP Microsoft [Publisher] Tech Editor for "Microsoft Publisher 2007 For Dummies" "spinndiva" wrote in message ... thank you for the response. it seem that i can't resolve the issue. i have word 2007 and some of the resolutions say, "if you have 2000 and/or earlier or 2002. can you help. thank you much. "JoAnn Paules" wrote: If it's on your screen, try a gentle cleaner and a soft cloth. If it's in your blank Word document, http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm -- JoAnn Paules MVP Microsoft [Publisher] Tech Editor for "Microsoft Publisher 2007 For Dummies" "spinndiva" wrote in message ... when opening word, there's a back slash (\) on screen, how can it permanently go away. |
#5
Posted to microsoft.public.word.newusers
|
|||
|
|||
word 2007, there's a back slash on screen
The article is still applicable (just not updated for Word 2007 yet), but
the template you need to deal with is named Normal.dotm, and you can find it in the folder listed for User Templates at Office Button | Word Options | Trust Center | Trust Center Settings... | Trusted Locations. But I'm wondering if what you're seeing might not be just the paragraph mark at the end of the default empty paragraph. Try clicking the button in the Paragraph group of the Home tab that has the ¶ symbol on it. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA "spinndiva" wrote in message ... thank you for the response. it seem that i can't resolve the issue. i have word 2007 and some of the resolutions say, "if you have 2000 and/or earlier or 2002. can you help. thank you much. "JoAnn Paules" wrote: If it's on your screen, try a gentle cleaner and a soft cloth. If it's in your blank Word document, http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm -- JoAnn Paules MVP Microsoft [Publisher] Tech Editor for "Microsoft Publisher 2007 For Dummies" "spinndiva" wrote in message ... when opening word, there's a back slash (\) on screen, how can it permanently go away. |
#6
Posted to microsoft.public.word.newusers
|
|||
|
|||
word 2007, there's a back slash on screen
And if it is not a paragraph mark and you are still getting that back slash
while opening new word documents, follow these steps and it should work: - StartRunType winword /safe (this will open word in safe mode without loading your Normal.dotm template) - Click on Office button at upper leftclick on "Open" - In Open box where you see "File Name" box type %appdata% hit Enter key - you will see list of folders from where you will have to go to Microsoft folderTemplates folder - There you will find "Normal.dotm", open it (If you are getting any "~$Normal.dotm", ignore it - After opening Normal.dotm, remove that BACK SLASH - Hold down SHIFT key and click on office button and then click on "Save All" - Close word completely and reopen it - Back slash should not be there Please reply..! -- Regards, Anup "spinndiva" wrote: thank you for the response. it seem that i can't resolve the issue. i have word 2007 and some of the resolutions say, "if you have 2000 and/or earlier or 2002. can you help. thank you much. "JoAnn Paules" wrote: If it's on your screen, try a gentle cleaner and a soft cloth. If it's in your blank Word document, http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm -- JoAnn Paules MVP Microsoft [Publisher] Tech Editor for "Microsoft Publisher 2007 For Dummies" "spinndiva" wrote in message ... when opening word, there's a back slash (\) on screen, how can it permanently go away. |
#7
Posted to microsoft.public.word.newusers
|
|||
|
|||
word 2007, there's a back slash on screen
hello a. tawde,
thank you for your help. i've did all the steps. but when i opened the template folder, in it was "normal" and "normal email". i didn't see "normal.dotm". i opened "normal" and there was no backslash on the document and the same with "normal email". i closed out both, opened a new document (on desktop) and the back slash was still there. do you have any suggestions. "Anup Tawde" wrote: And if it is not a paragraph mark and you are still getting that back slash while opening new word documents, follow these steps and it should work: - StartRunType winword /safe (this will open word in safe mode without loading your Normal.dotm template) - Click on Office button at upper leftclick on "Open" - In Open box where you see "File Name" box type %appdata% hit Enter key - you will see list of folders from where you will have to go to Microsoft folderTemplates folder - There you will find "Normal.dotm", open it (If you are getting any "~$Normal.dotm", ignore it - After opening Normal.dotm, remove that BACK SLASH - Hold down SHIFT key and click on office button and then click on "Save All" - Close word completely and reopen it - Back slash should not be there Please reply..! -- Regards, Anup "spinndiva" wrote: thank you for the response. it seem that i can't resolve the issue. i have word 2007 and some of the resolutions say, "if you have 2000 and/or earlier or 2002. can you help. thank you much. "JoAnn Paules" wrote: If it's on your screen, try a gentle cleaner and a soft cloth. If it's in your blank Word document, http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm -- JoAnn Paules MVP Microsoft [Publisher] Tech Editor for "Microsoft Publisher 2007 For Dummies" "spinndiva" wrote in message ... when opening word, there's a back slash (\) on screen, how can it permanently go away. |
#8
Posted to microsoft.public.word.newusers
|
|||
|
|||
word 2007, there's a back slash on screen
Normal is the one you want (you evidently don't have file extensions
displayed). Are you sure you're not just seeing the paragraph mark? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA "spinndiva" wrote in message ... hello a. tawde, thank you for your help. i've did all the steps. but when i opened the template folder, in it was "normal" and "normal email". i didn't see "normal.dotm". i opened "normal" and there was no backslash on the document and the same with "normal email". i closed out both, opened a new document (on desktop) and the back slash was still there. do you have any suggestions. "Anup Tawde" wrote: And if it is not a paragraph mark and you are still getting that back slash while opening new word documents, follow these steps and it should work: - StartRunType winword /safe (this will open word in safe mode without loading your Normal.dotm template) - Click on Office button at upper leftclick on "Open" - In Open box where you see "File Name" box type %appdata% hit Enter key - you will see list of folders from where you will have to go to Microsoft folderTemplates folder - There you will find "Normal.dotm", open it (If you are getting any "~$Normal.dotm", ignore it - After opening Normal.dotm, remove that BACK SLASH - Hold down SHIFT key and click on office button and then click on "Save All" - Close word completely and reopen it - Back slash should not be there Please reply..! -- Regards, Anup "spinndiva" wrote: thank you for the response. it seem that i can't resolve the issue. i have word 2007 and some of the resolutions say, "if you have 2000 and/or earlier or 2002. can you help. thank you much. "JoAnn Paules" wrote: If it's on your screen, try a gentle cleaner and a soft cloth. If it's in your blank Word document, http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm -- JoAnn Paules MVP Microsoft [Publisher] Tech Editor for "Microsoft Publisher 2007 For Dummies" "spinndiva" wrote in message ... when opening word, there's a back slash (\) on screen, how can it permanently go away. |
#9
Posted to microsoft.public.word.newusers
|
|||
|
|||
word 2007, there's a back slash on screen
Open Windows Explorer and go to Tools, Options and clear the check box
against the 'Hide file extensions for Known file types'. It is a security risk and it is the reason you cannot see the extension on those two files. -- Terry Farrell - MSWord MVP "spinndiva" wrote in message ... hello a. tawde, thank you for your help. i've did all the steps. but when i opened the template folder, in it was "normal" and "normal email". i didn't see "normal.dotm". i opened "normal" and there was no backslash on the document and the same with "normal email". i closed out both, opened a new document (on desktop) and the back slash was still there. do you have any suggestions. "Anup Tawde" wrote: And if it is not a paragraph mark and you are still getting that back slash while opening new word documents, follow these steps and it should work: - StartRunType winword /safe (this will open word in safe mode without loading your Normal.dotm template) - Click on Office button at upper leftclick on "Open" - In Open box where you see "File Name" box type %appdata% hit Enter key - you will see list of folders from where you will have to go to Microsoft folderTemplates folder - There you will find "Normal.dotm", open it (If you are getting any "~$Normal.dotm", ignore it - After opening Normal.dotm, remove that BACK SLASH - Hold down SHIFT key and click on office button and then click on "Save All" - Close word completely and reopen it - Back slash should not be there Please reply..! -- Regards, Anup "spinndiva" wrote: thank you for the response. it seem that i can't resolve the issue. i have word 2007 and some of the resolutions say, "if you have 2000 and/or earlier or 2002. can you help. thank you much. "JoAnn Paules" wrote: If it's on your screen, try a gentle cleaner and a soft cloth. If it's in your blank Word document, http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm -- JoAnn Paules MVP Microsoft [Publisher] Tech Editor for "Microsoft Publisher 2007 For Dummies" "spinndiva" wrote in message ... when opening word, there's a back slash (\) on screen, how can it permanently go away. |
#10
Posted to microsoft.public.word.newusers
|
|||
|
|||
word 2007, there's a back slash on screen
when i open a new docucment, there's a (\) on the screen where the cursor is.
i always have to hit bacspace to delete it and then go on typing my document. it's a pain. "Suzanne S. Barnhill" wrote: Normal is the one you want (you evidently don't have file extensions displayed). Are you sure you're not just seeing the paragraph mark? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA "spinndiva" wrote in message ... hello a. tawde, thank you for your help. i've did all the steps. but when i opened the template folder, in it was "normal" and "normal email". i didn't see "normal.dotm". i opened "normal" and there was no backslash on the document and the same with "normal email". i closed out both, opened a new document (on desktop) and the back slash was still there. do you have any suggestions. "Anup Tawde" wrote: And if it is not a paragraph mark and you are still getting that back slash while opening new word documents, follow these steps and it should work: - StartRunType winword /safe (this will open word in safe mode without loading your Normal.dotm template) - Click on Office button at upper leftclick on "Open" - In Open box where you see "File Name" box type %appdata% hit Enter key - you will see list of folders from where you will have to go to Microsoft folderTemplates folder - There you will find "Normal.dotm", open it (If you are getting any "~$Normal.dotm", ignore it - After opening Normal.dotm, remove that BACK SLASH - Hold down SHIFT key and click on office button and then click on "Save All" - Close word completely and reopen it - Back slash should not be there Please reply..! -- Regards, Anup "spinndiva" wrote: thank you for the response. it seem that i can't resolve the issue. i have word 2007 and some of the resolutions say, "if you have 2000 and/or earlier or 2002. can you help. thank you much. "JoAnn Paules" wrote: If it's on your screen, try a gentle cleaner and a soft cloth. If it's in your blank Word document, http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm -- JoAnn Paules MVP Microsoft [Publisher] Tech Editor for "Microsoft Publisher 2007 For Dummies" "spinndiva" wrote in message ... when opening word, there's a back slash (\) on screen, how can it permanently go away. |
#11
Posted to microsoft.public.word.newusers
|
|||
|
|||
word 2007, there's a back slash on screen
Then removing it from Normal.dotm is what you need to do. The instructions
at http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm are quite clear, and you've been provided the appropriate path for Normal.dotm several times. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA "spinndiva" wrote in message ... when i open a new docucment, there's a (\) on the screen where the cursor is. i always have to hit bacspace to delete it and then go on typing my document. it's a pain. "Suzanne S. Barnhill" wrote: Normal is the one you want (you evidently don't have file extensions displayed). Are you sure you're not just seeing the paragraph mark? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA "spinndiva" wrote in message ... hello a. tawde, thank you for your help. i've did all the steps. but when i opened the template folder, in it was "normal" and "normal email". i didn't see "normal.dotm". i opened "normal" and there was no backslash on the document and the same with "normal email". i closed out both, opened a new document (on desktop) and the back slash was still there. do you have any suggestions. "Anup Tawde" wrote: And if it is not a paragraph mark and you are still getting that back slash while opening new word documents, follow these steps and it should work: - StartRunType winword /safe (this will open word in safe mode without loading your Normal.dotm template) - Click on Office button at upper leftclick on "Open" - In Open box where you see "File Name" box type %appdata% hit Enter key - you will see list of folders from where you will have to go to Microsoft folderTemplates folder - There you will find "Normal.dotm", open it (If you are getting any "~$Normal.dotm", ignore it - After opening Normal.dotm, remove that BACK SLASH - Hold down SHIFT key and click on office button and then click on "Save All" - Close word completely and reopen it - Back slash should not be there Please reply..! -- Regards, Anup "spinndiva" wrote: thank you for the response. it seem that i can't resolve the issue. i have word 2007 and some of the resolutions say, "if you have 2000 and/or earlier or 2002. can you help. thank you much. "JoAnn Paules" wrote: If it's on your screen, try a gentle cleaner and a soft cloth. If it's in your blank Word document, http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm -- JoAnn Paules MVP Microsoft [Publisher] Tech Editor for "Microsoft Publisher 2007 For Dummies" "spinndiva" wrote in message ... when opening word, there's a back slash (\) on screen, how can it permanently go away. |
#12
Posted to microsoft.public.word.newusers
|
|||
|
|||
word 2007, there's a back slash on screen
i'm sorry, but the instructions you told me to follow seems that it's not
working on my end. i know you replied several times and for some odd reason, it's not working for me. i typed in "normal.dot" and nothing came up. i've clicked on "show all files", restared my computer and still nothing, so i don't know whats wrong. sorry. "Suzanne S. Barnhill" wrote: Then removing it from Normal.dotm is what you need to do. The instructions at http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm are quite clear, and you've been provided the appropriate path for Normal.dotm several times. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA "spinndiva" wrote in message ... when i open a new docucment, there's a (\) on the screen where the cursor is. i always have to hit bacspace to delete it and then go on typing my document. it's a pain. "Suzanne S. Barnhill" wrote: Normal is the one you want (you evidently don't have file extensions displayed). Are you sure you're not just seeing the paragraph mark? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA "spinndiva" wrote in message ... hello a. tawde, thank you for your help. i've did all the steps. but when i opened the template folder, in it was "normal" and "normal email". i didn't see "normal.dotm". i opened "normal" and there was no backslash on the document and the same with "normal email". i closed out both, opened a new document (on desktop) and the back slash was still there. do you have any suggestions. "Anup Tawde" wrote: And if it is not a paragraph mark and you are still getting that back slash while opening new word documents, follow these steps and it should work: - StartRunType winword /safe (this will open word in safe mode without loading your Normal.dotm template) - Click on Office button at upper leftclick on "Open" - In Open box where you see "File Name" box type %appdata% hit Enter key - you will see list of folders from where you will have to go to Microsoft folderTemplates folder - There you will find "Normal.dotm", open it (If you are getting any "~$Normal.dotm", ignore it - After opening Normal.dotm, remove that BACK SLASH - Hold down SHIFT key and click on office button and then click on "Save All" - Close word completely and reopen it - Back slash should not be there Please reply..! -- Regards, Anup "spinndiva" wrote: thank you for the response. it seem that i can't resolve the issue. i have word 2007 and some of the resolutions say, "if you have 2000 and/or earlier or 2002. can you help. thank you much. "JoAnn Paules" wrote: If it's on your screen, try a gentle cleaner and a soft cloth. If it's in your blank Word document, http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm -- JoAnn Paules MVP Microsoft [Publisher] Tech Editor for "Microsoft Publisher 2007 For Dummies" "spinndiva" wrote in message ... when opening word, there's a back slash (\) on screen, how can it permanently go away. |
#13
Posted to microsoft.public.word.newusers
|
|||
|
|||
word 2007, there's a back slash on screen
THANK YOU A. TAWDE,
A BIG HELP,I GOT IT!! what i had to do was press the space bar a couple times over then back space, save, closed out, opened new document, and boom, document is clear as a whistle. no more back slash !!! Thanks so much. "Anup Tawde" wrote: And if it is not a paragraph mark and you are still getting that back slash while opening new word documents, follow these steps and it should work: - StartRunType winword /safe (this will open word in safe mode without loading your Normal.dotm template) - Click on Office button at upper leftclick on "Open" - In Open box where you see "File Name" box type %appdata% hit Enter key - you will see list of folders from where you will have to go to Microsoft folderTemplates folder - There you will find "Normal.dotm", open it (If you are getting any "~$Normal.dotm", ignore it - After opening Normal.dotm, remove that BACK SLASH - Hold down SHIFT key and click on office button and then click on "Save All" - Close word completely and reopen it - Back slash should not be there Please reply..! -- Regards, Anup "spinndiva" wrote: thank you for the response. it seem that i can't resolve the issue. i have word 2007 and some of the resolutions say, "if you have 2000 and/or earlier or 2002. can you help. thank you much. "JoAnn Paules" wrote: If it's on your screen, try a gentle cleaner and a soft cloth. If it's in your blank Word document, http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm -- JoAnn Paules MVP Microsoft [Publisher] Tech Editor for "Microsoft Publisher 2007 For Dummies" "spinndiva" wrote in message ... when opening word, there's a back slash (\) on screen, how can it permanently go away. |
#14
Posted to microsoft.public.word.newusers
|
|||
|
|||
word 2007, there's a back slash on screen
i got it with the help of a. tawde. thanks again.
"Suzanne S. Barnhill" wrote: Then removing it from Normal.dotm is what you need to do. The instructions at http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm are quite clear, and you've been provided the appropriate path for Normal.dotm several times. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA "spinndiva" wrote in message ... when i open a new docucment, there's a (\) on the screen where the cursor is. i always have to hit bacspace to delete it and then go on typing my document. it's a pain. "Suzanne S. Barnhill" wrote: Normal is the one you want (you evidently don't have file extensions displayed). Are you sure you're not just seeing the paragraph mark? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA "spinndiva" wrote in message ... hello a. tawde, thank you for your help. i've did all the steps. but when i opened the template folder, in it was "normal" and "normal email". i didn't see "normal.dotm". i opened "normal" and there was no backslash on the document and the same with "normal email". i closed out both, opened a new document (on desktop) and the back slash was still there. do you have any suggestions. "Anup Tawde" wrote: And if it is not a paragraph mark and you are still getting that back slash while opening new word documents, follow these steps and it should work: - StartRunType winword /safe (this will open word in safe mode without loading your Normal.dotm template) - Click on Office button at upper leftclick on "Open" - In Open box where you see "File Name" box type %appdata% hit Enter key - you will see list of folders from where you will have to go to Microsoft folderTemplates folder - There you will find "Normal.dotm", open it (If you are getting any "~$Normal.dotm", ignore it - After opening Normal.dotm, remove that BACK SLASH - Hold down SHIFT key and click on office button and then click on "Save All" - Close word completely and reopen it - Back slash should not be there Please reply..! -- Regards, Anup "spinndiva" wrote: thank you for the response. it seem that i can't resolve the issue. i have word 2007 and some of the resolutions say, "if you have 2000 and/or earlier or 2002. can you help. thank you much. "JoAnn Paules" wrote: If it's on your screen, try a gentle cleaner and a soft cloth. If it's in your blank Word document, http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm -- JoAnn Paules MVP Microsoft [Publisher] Tech Editor for "Microsoft Publisher 2007 For Dummies" "spinndiva" wrote in message ... when opening word, there's a back slash (\) on screen, how can it permanently go away. |
#15
Posted to microsoft.public.word.newusers
|
|||
|
|||
word 2007, there's a back slash on screen
It is not working because the file you are looking for is normal.dotm and
not normal.dot! This is a normally hidden file. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org spinndiva wrote: i'm sorry, but the instructions you told me to follow seems that it's not working on my end. i know you replied several times and for some odd reason, it's not working for me. i typed in "normal.dot" and nothing came up. i've clicked on "show all files", restared my computer and still nothing, so i don't know whats wrong. sorry. "Suzanne S. Barnhill" wrote: Then removing it from Normal.dotm is what you need to do. The instructions at http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm are quite clear, and you've been provided the appropriate path for Normal.dotm several times. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA "spinndiva" wrote in message ... when i open a new docucment, there's a (\) on the screen where the cursor is. i always have to hit bacspace to delete it and then go on typing my document. it's a pain. "Suzanne S. Barnhill" wrote: Normal is the one you want (you evidently don't have file extensions displayed). Are you sure you're not just seeing the paragraph mark? -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA "spinndiva" wrote in message ... hello a. tawde, thank you for your help. i've did all the steps. but when i opened the template folder, in it was "normal" and "normal email". i didn't see "normal.dotm". i opened "normal" and there was no backslash on the document and the same with "normal email". i closed out both, opened a new document (on desktop) and the back slash was still there. do you have any suggestions. "Anup Tawde" wrote: And if it is not a paragraph mark and you are still getting that back slash while opening new word documents, follow these steps and it should work: - StartRunType winword /safe (this will open word in safe mode without loading your Normal.dotm template) - Click on Office button at upper leftclick on "Open" - In Open box where you see "File Name" box type %appdata% hit Enter key - you will see list of folders from where you will have to go to Microsoft folderTemplates folder - There you will find "Normal.dotm", open it (If you are getting any "~$Normal.dotm", ignore it - After opening Normal.dotm, remove that BACK SLASH - Hold down SHIFT key and click on office button and then click on "Save All" - Close word completely and reopen it - Back slash should not be there Please reply..! -- Regards, Anup "spinndiva" wrote: thank you for the response. it seem that i can't resolve the issue. i have word 2007 and some of the resolutions say, "if you have 2000 and/or earlier or 2002. can you help. thank you much. "JoAnn Paules" wrote: If it's on your screen, try a gentle cleaner and a soft cloth. If it's in your blank Word document, http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm -- JoAnn Paules MVP Microsoft [Publisher] Tech Editor for "Microsoft Publisher 2007 For Dummies" "spinndiva" wrote in message ... when opening word, there's a back slash (\) on screen, how can it permanently go away. |
#16
Posted to microsoft.public.word.newusers
|
|||
|
|||
word 2007, there's a back slash on screen
Great..! Keep smiling..! :-)
-- Regards, Anup "spinndiva" wrote: THANK YOU A. TAWDE, A BIG HELP,I GOT IT!! what i had to do was press the space bar a couple times over then back space, save, closed out, opened new document, and boom, document is clear as a whistle. no more back slash !!! Thanks so much. "Anup Tawde" wrote: And if it is not a paragraph mark and you are still getting that back slash while opening new word documents, follow these steps and it should work: - StartRunType winword /safe (this will open word in safe mode without loading your Normal.dotm template) - Click on Office button at upper leftclick on "Open" - In Open box where you see "File Name" box type %appdata% hit Enter key - you will see list of folders from where you will have to go to Microsoft folderTemplates folder - There you will find "Normal.dotm", open it (If you are getting any "~$Normal.dotm", ignore it - After opening Normal.dotm, remove that BACK SLASH - Hold down SHIFT key and click on office button and then click on "Save All" - Close word completely and reopen it - Back slash should not be there Please reply..! -- Regards, Anup "spinndiva" wrote: thank you for the response. it seem that i can't resolve the issue. i have word 2007 and some of the resolutions say, "if you have 2000 and/or earlier or 2002. can you help. thank you much. "JoAnn Paules" wrote: If it's on your screen, try a gentle cleaner and a soft cloth. If it's in your blank Word document, http://word.mvps.org/FAQs/AppErrors/...ocNotBlank.htm -- JoAnn Paules MVP Microsoft [Publisher] Tech Editor for "Microsoft Publisher 2007 For Dummies" "spinndiva" wrote in message ... when opening word, there's a back slash (\) on screen, how can it permanently go away. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Mail Merge Document Printing Back to Back - Office 2007 | Mailmerge | |||
How do I get language tab back at bottom of Word screen | Microsoft Word Help | |||
How do I restore ny Word screen back to fullsize? | Page Layout | |||
Soft Back Slash | Microsoft Word Help | |||
How do I get the document control menu back on my Word screen? I. | New Users |