#1   Report Post  
mel
 
Posts: n/a
Default Word Count

Are words such as "a", "the", "and", "or" etc. counted when the word count
option is used in the program?
  #2   Report Post  
Greg Maxey
 
Posts: n/a
Default

Mel,

Did you try it? Yes they are.


Here is a macro that will let you exclude words:


Sub WordFrequency()

Dim SingleWord As String 'Raw word pulled from doc
Const maxwords = 9000 'Maximum unique words allowed
Dim Words(maxwords) As String 'Array to hold unique words
Dim Freq(maxwords) As Integer 'Frequency counter for Unique Words
Dim WordNum As Integer 'Number of unique words
Dim ByFreq As Boolean 'Flag for sorting order
Dim ttlwds As Long 'Total words in the document
Dim Excludes As String 'Words to be excluded
Dim Found As Boolean 'Temporary flag
Dim j, k, l, Temp As Integer 'Temporary variables
Dim IngWordCount As Long 'Total non-excluded words in document
Dim NonWordObjects As Long
Dim AllWordOjects As Long
Dim TotalWords As Long
Dim tword As String '

'Set up excluded words
'Excludes = "[pickleloaf][gruntbutter]"
'Excludes = Excludes & InputBox$("The following words are excluded by
default: " & Excludes & ". Enter additional words that you wish to exclude,
surrounding each word with [ ].", "Excluded Words", "")
Excludes = InputBox$("Enter words that you wish to exclude. Place each word
within square brackets [ ]. Example: [is][a].", "Excluded Words", "")

'Find out how to sort
ByFreq = True
Ans = InputBox$("Default sort order is word freqeuncy. To sort
alphabetically by word, type Word in the field below.", "Sort order",
"FREQ")
If Ans = "" Then End
If UCase(Ans) = "WORD" Then
ByFreq = False
End If

Selection.HomeKey Unit:=wdStory
System.Cursor = wdCursorWait
WordNum = 0
ttlwds = ActiveDocument.Words.Count
'AllWordObjects = ActiveDocument.Words.Count
'TotalWords = NonWordObjects

'Control the repeat
For Each aword In ActiveDocument.Words
SingleWord = Trim(LCase(aword))
If SingleWord "a" Or SingleWord "z" Then SingleWord = "" 'Out of range?
If SingleWord "a" Or SingleWord "z" Then NonWordObjects = NonWordObjects
+ 1
'SingleWord = Trim(aword)
'If SingleWord "A" Or SingleWord "z" Then SingleWord = "" 'Out of range?
If InStr(Excludes, "[" & SingleWord & "]") Then SingleWord = "" 'On exclude
list?
If Len(SingleWord) 0 Then
IngWordCount = IngWordCount + 1
Found = False
For j = 1 To WordNum
If Words(j) = SingleWord Then
Freq(j) = Freq(j) + 1
Found = True
Exit For
End If
Next j
If Not Found Then
WordNum = WordNum + 1
Words(WordNum) = SingleWord
Freq(WordNum) = 1
End If
If WordNum maxwords - 1 Then
j = MsgBox("The maximum array size has been exceeded. Increase
maxwords.", vbOKOnly)
Exit For
End If
End If
ttlwds = ttlwds - 1
StatusBar = "Remaining: " & ttlwds & " Unique: " & WordNum
Next aword

'Now sort it into word order
For j = 1 To WordNum - 1
k = j
For l = j + 1 To WordNum
If (Not ByFreq And Words(l) Words(k)) Or (ByFreq And Freq(l) Freq(k))
Then k = l
Next l
If k j Then
tword = Words(j)
Words(j) = Words(k)
Words(k) = tword
Temp = Freq(j)
Freq(j) = Freq(k)
Freq(k) = Temp
End If
StatusBar = "Sorting: " & WordNum - j
Next j

AllWordObjects = ActiveDocument.Words.Count
NonWordObjects = NonWordObjects
TotalWords = AllWordObjects - NonWordObjects

'Now write out the results
tmpName = ActiveDocument.AttachedTemplate.FullName
Documents.Add Template:=tmpName, NewTemplate:=False
Selection.ParagraphFormat.TabStops.ClearAll
With Selection
For j = 1 To WordNum
..TypeText Text:=Words(j) & vbTab & Trim(Str(Freq(j))) & vbCrLf
Next j
End With
ActiveDocument.Range.Select
Selection.ConvertToTable
Selection.Collapse wdCollapseStart
ActiveDocument.Tables(1).Rows.Add BeforeRow:=Selection.Rows(1)
ActiveDocument.Tables(1).Cell(1, 1).Range.InsertBefore "Unique Words"
ActiveDocument.Tables(1).Cell(1, 2).Range.InsertBefore "Number of
Occurrences"
ActiveDocument.Tables(1).Columns(2).Select
Selection.ParagraphFormat.Alignment = wdAlignParagraphRight
Selection.Collapse wdCollapseStart
ActiveDocument.Tables(1).Rows(1).Shading.Backgroun dPatternColor =
wdColorGray20
ActiveDocument.Tables(1).Columns(1).PreferredWidth = InchesToPoints(4.75)
ActiveDocument.Tables(1).Columns(2).PreferredWidth = InchesToPoints(1.9)

ActiveDocument.Tables(1).Rows.Add
ActiveDocument.Tables(1).Cell(ActiveDocument.Table s(1).Rows.Count,
1).Range.InsertBefore "Summary"
ActiveDocument.Tables(1).Cell(ActiveDocument.Table s(1).Rows.Count,
2).Range.InsertBefore "Total"
ActiveDocument.Tables(1).Rows(ActiveDocument.Table s(1).Rows.Count).Shading.BackgroundPatternColor
= wdColorGray20


ActiveDocument.Tables(1).Rows.Add
ActiveDocument.Tables(1).Cell(ActiveDocument.Table s(1).Rows.Count,
1).Range.InsertBefore "Number of Unique Words in Document"
ActiveDocument.Tables(1).Cell(ActiveDocument.Table s(1).Rows.Count,
2).Range.InsertBefore Trim(Str(WordNum))
ActiveDocument.Tables(1).Rows(ActiveDocument.Table s(1).Rows.Count).Shading.BackgroundPatternColor
= wdColorAutomatic

ActiveDocument.Tables(1).Rows.Add
ActiveDocument.Tables(1).Cell(ActiveDocument.Table s(1).Rows.Count,
1).Range.InsertBefore "Number of Non-Excluded Words in Document"
ActiveDocument.Tables(1).Cell(ActiveDocument.Table s(1).Rows.Count,
2).Range.InsertBefore (IngWordCount)

ActiveDocument.Tables(1).Rows.Add
ActiveDocument.Tables(1).Cell(ActiveDocument.Table s(1).Rows.Count,
1).Range.InsertBefore "Number of Words (Excluded and Non-Excluded) in
Document"
ActiveDocument.Tables(1).Cell(ActiveDocument.Table s(1).Rows.Count,
2).Range.InsertBefore (TotalWords)
System.Cursor = wdCursorNormal

MsgBox "This document contains " & Trim(Str(WordNum)) & " unique words. "
MsgBox "This document contains " & IngWordCount & " non-excluded words. "
MsgBox "This document contains a total of " & TotalWords & " (excluded and
non-excluded) words. "
MsgBox "For more statistics on this document, use ToolsWord Count in the
original document. "

Selection.HomeKey wdStory

End Sub
--
Greg Maxey/Word MVP
A Peer in Peer to Peer Support

mel wrote:
Are words such as "a", "the", "and", "or" etc. counted when the word
count option is used in the program?



  #3   Report Post  
Suzanne S. Barnhill
 
Posts: n/a
Default

Yes, all words are counted.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"mel" wrote in message
...
Are words such as "a", "the", "and", "or" etc. counted when the word count
option is used in the program?


Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How can I divide a page into three sections? Bonnie Microsoft Word Help 3 May 8th 23 02:47 AM
I am typing a document and throughout the spellcheck, word count . angel_delight Microsoft Word Help 3 December 9th 04 03:42 PM
formatting links from excel into word (extra line feeds) JGT Microsoft Word Help 1 December 9th 04 12:01 PM
saving the workspace Mike Microsoft Word Help 3 December 9th 04 12:32 AM
Frequency count in Word mmm Microsoft Word Help 1 November 28th 04 01:44 PM


All times are GMT +1. The time now is 10:28 AM.

Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Microsoft Office Word Forum - WordBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Word"