Word 2002, document with multi sections with variations in footer including
page numbering that goes throughout.
Numbering has gone out of whack and will not recognize previous section when
continue from previous section is checked in format numbering. Footer is set
as NOT same as previous because the only thing the same as previous is page
number.
Also is there a way to start, or control the start of number of pages.
Example:
Current shows Page 1 of 80 but document really is only 75 pages as the first
5 pages are numbered differently (roman numerals) or not consider part of
total document.
Can someone please give me the field codes needed and instructions on how to
place them in my footer to achieve my requested result.
Currently when I do the shift F9 I only see {}.
Help on this would be greatly appreciated as I am as usual time deadlined to
fix this problem.
Thank you to all for the assistance.

See this link regarding document sections:
http://word.mvps.org/FAQs/Formatting...thSections.htm

See this link regarding page numbering:
http://word.mvps.org/FAQs/Numbering/PageNumbering.htm

"Slow Learner" wrote:

Word 2002, document with multi sections with variations in footer including
page numbering that goes throughout.
Numbering has gone out of whack and will not recognize previous section when
continue from previous section is checked in format numbering. Footer is set
as NOT same as previous because the only thing the same as previous is page
number.
Also is there a way to start, or control the start of number of pages.
Example:
Current shows Page 1 of 80 but document really is only 75 pages as the first
5 pages are numbered differently (roman numerals) or not consider part of
total document.
Can someone please give me the field codes needed and instructions on how to
place them in my footer to achieve my requested result.
Currently when I do the shift F9 I only see {}.
Help on this would be greatly appreciated as I am as usual time deadlined to
fix this problem.
Thank you to all for the assistance.

Thanks have downloaded and printed your help and will try to figure this out.
I am using section new page breaks and section continuous throughout and
will have to take a look at the page numbering info as I am having no problem
in one document, was having no problem in the present document, and now seem
to be coming up 0's!
Thanks again I appreciate your assistance

"SVC" wrote:

See this link regarding document sections:
http://word.mvps.org/FAQs/Formatting...thSections.htm

See this link regarding page numbering:
http://word.mvps.org/FAQs/Numbering/PageNumbering.htm

"Slow Learner" wrote:

Word 2002, document with multi sections with variations in footer including
page numbering that goes throughout.
Numbering has gone out of whack and will not recognize previous section when
continue from previous section is checked in format numbering. Footer is set
as NOT same as previous because the only thing the same as previous is page
number.
Also is there a way to start, or control the start of number of pages.
Example:
Current shows Page 1 of 80 but document really is only 75 pages as the first
5 pages are numbered differently (roman numerals) or not consider part of
total document.
Can someone please give me the field codes needed and instructions on how to
place them in my footer to achieve my requested result.
Currently when I do the shift F9 I only see {}.
Help on this would be greatly appreciated as I am as usual time deadlined to
fix this problem.
Thank you to all for the assistance.

Try Alt F9 rather than Shift F9.
--
Charles Kenyon

Word New User FAQ & Web Directory: http://addbalance.com/word

Intermediate User's Guide to Microsoft Word (supplemented version of
Microsoft's Legal Users' Guide) http://addbalance.com/usersguide

See also the MVP FAQ: http://word.mvps.org/FAQs/ which is awesome!
--------- --------- --------- --------- --------- ---------
This message is posted to a newsgroup. Please post replies
and questions to the newsgroup so that others can learn
from my ignorance and your wisdom.


"Slow Learner" wrote in message
...
Word 2002, document with multi sections with variations in footer
including
page numbering that goes throughout.
Numbering has gone out of whack and will not recognize previous section
when
continue from previous section is checked in format numbering. Footer is
set
as NOT same as previous because the only thing the same as previous is
page
number.
Also is there a way to start, or control the start of number of pages.
Example:
Current shows Page 1 of 80 but document really is only 75 pages as the
first
5 pages are numbered differently (roman numerals) or not consider part of
total document.
Can someone please give me the field codes needed and instructions on how
to
place them in my footer to achieve my requested result.
Currently when I do the shift F9 I only see {}.
Help on this would be greatly appreciated as I am as usual time deadlined
to
fix this problem.
Thank you to all for the assistance.

No luck, still stuck on '0' for page number past section 5. Numbering starts
at section 5 as Page 1 of 80 some odd. Section 6 does not, will not show
page 2 of but does show the total number correctly. Sections 7 and 8 do not
have page numbering, section 9 follows the same page 0 of etc. Nothing is
set to same as previous as all contain different information. I have tried
to change the "start at" numbering but this does not work. Tried to change
the set up to continue from previous but this does not work either.
Is there a way to see the actual programming of the field that is making it
appear 0? and change this somehow?????


"Slow Learner" wrote:

Word 2002, document with multi sections with variations in footer including
page numbering that goes throughout.
Numbering has gone out of whack and will not recognize previous section when
continue from previous section is checked in format numbering. Footer is set
as NOT same as previous because the only thing the same as previous is page
number.
Also is there a way to start, or control the start of number of pages.
Example:
Current shows Page 1 of 80 but document really is only 75 pages as the first
5 pages are numbered differently (roman numerals) or not consider part of
total document.
Can someone please give me the field codes needed and instructions on how to
place them in my footer to achieve my requested result.
Currently when I do the shift F9 I only see {}.
Help on this would be greatly appreciated as I am as usual time deadlined to
fix this problem.
Thank you to all for the assistance.

Thanks Charles, that was a whoops on my part, I was doing AltF9.
This must be something else as on the bottom the bar is showing Page 0 Sec 6
26/90 in Section 6 and all affected sections show this Page 0. Pages that
are taking the number sequence and those without page numbers show: Page 1
Sec whatever etc.

"Charles Kenyon" wrote:

Try Alt F9 rather than Shift F9.
--
Charles Kenyon

Word New User FAQ & Web Directory: http://addbalance.com/word

Intermediate User's Guide to Microsoft Word (supplemented version of
Microsoft's Legal Users' Guide) http://addbalance.com/usersguide

See also the MVP FAQ: http://word.mvps.org/FAQs/ which is awesome!
--------- --------- --------- --------- --------- ---------
This message is posted to a newsgroup. Please post replies
and questions to the newsgroup so that others can learn
from my ignorance and your wisdom.


"Slow Learner" wrote in message
...
Word 2002, document with multi sections with variations in footer
including
page numbering that goes throughout.
Numbering has gone out of whack and will not recognize previous section
when
continue from previous section is checked in format numbering. Footer is
set
as NOT same as previous because the only thing the same as previous is
page
number.
Also is there a way to start, or control the start of number of pages.
Example:
Current shows Page 1 of 80 but document really is only 75 pages as the
first
5 pages are numbered differently (roman numerals) or not consider part of
total document.
Can someone please give me the field codes needed and instructions on how
to
place them in my footer to achieve my requested result.
Currently when I do the shift F9 I only see {}.
Help on this would be greatly appreciated as I am as usual time deadlined
to
fix this problem.
Thank you to all for the assistance.

table in header seems to be a tad of a problem...... working on this and
have also been responded to on my stuck on 0 posting.
I really appreciate all this help!

"Slow Learner" wrote:

Word 2002, document with multi sections with variations in footer including
page numbering that goes throughout.
Numbering has gone out of whack and will not recognize previous section when
continue from previous section is checked in format numbering. Footer is set
as NOT same as previous because the only thing the same as previous is page
number.
Also is there a way to start, or control the start of number of pages.
Example:
Current shows Page 1 of 80 but document really is only 75 pages as the first
5 pages are numbered differently (roman numerals) or not consider part of
total document.
Can someone please give me the field codes needed and instructions on how to
place them in my footer to achieve my requested result.
Currently when I do the shift F9 I only see {}.
Help on this would be greatly appreciated as I am as usual time deadlined to
fix this problem.
Thank you to all for the assistance.

It is seldom that one needs a table in a header.
--
Charles Kenyon

Word New User FAQ & Web Directory: http://addbalance.com/word

Intermediate User's Guide to Microsoft Word (supplemented version of
Microsoft's Legal Users' Guide) http://addbalance.com/usersguide

See also the MVP FAQ: http://word.mvps.org/FAQs/ which is awesome!
--------- --------- --------- --------- --------- ---------
This message is posted to a newsgroup. Please post replies
and questions to the newsgroup so that others can learn
from my ignorance and your wisdom.


"Slow Learner" wrote in message
...
table in header seems to be a tad of a problem...... working on this and
have also been responded to on my stuck on 0 posting.
I really appreciate all this help!

"Slow Learner" wrote:

Word 2002, document with multi sections with variations in footer
including
page numbering that goes throughout.
Numbering has gone out of whack and will not recognize previous section
when
continue from previous section is checked in format numbering. Footer is
set
as NOT same as previous because the only thing the same as previous is
page
number.
Also is there a way to start, or control the start of number of pages.
Example:
Current shows Page 1 of 80 but document really is only 75 pages as the
first
5 pages are numbered differently (roman numerals) or not consider part of
total document.
Can someone please give me the field codes needed and instructions on how
to
place them in my footer to achieve my requested result.
Currently when I do the shift F9 I only see {}.
Help on this would be greatly appreciated as I am as usual time deadlined
to
fix this problem.
Thank you to all for the assistance.

See http://word.mvps.org/FAQs/Numbering/PageNumber0.htm

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Slow Learner" wrote in message
...
Thanks Charles, that was a whoops on my part, I was doing AltF9.
This must be something else as on the bottom the bar is showing Page 0 Sec
6
26/90 in Section 6 and all affected sections show this Page 0. Pages that
are taking the number sequence and those without page numbers show: Page 1
Sec whatever etc.

"Charles Kenyon" wrote:

Try Alt F9 rather than Shift F9.
--
Charles Kenyon

Word New User FAQ & Web Directory: http://addbalance.com/word

Intermediate User's Guide to Microsoft Word (supplemented version of
Microsoft's Legal Users' Guide) http://addbalance.com/usersguide

See also the MVP FAQ: http://word.mvps.org/FAQs/ which is awesome!
--------- --------- --------- --------- --------- ---------
This message is posted to a newsgroup. Please post replies
and questions to the newsgroup so that others can learn
from my ignorance and your wisdom.


"Slow Learner" wrote in message
...
Word 2002, document with multi sections with variations in footer
including
page numbering that goes throughout.
Numbering has gone out of whack and will not recognize previous
section
when
continue from previous section is checked in format numbering. Footer
is
set
as NOT same as previous because the only thing the same as previous is
page
number.
Also is there a way to start, or control the start of number of pages.
Example:
Current shows Page 1 of 80 but document really is only 75 pages as the
first
5 pages are numbered differently (roman numerals) or not consider part
of
total document.
Can someone please give me the field codes needed and instructions on
how
to
place them in my footer to achieve my requested result.
Currently when I do the shift F9 I only see {}.
Help on this would be greatly appreciated as I am as usual time
deadlined
to
fix this problem.
Thank you to all for the assistance.

Problem was in tables in headers. Thanks Charles for the information and to
all others for assistance.

"Slow Learner" wrote:

Thanks Charles, that was a whoops on my part, I was doing AltF9.
This must be something else as on the bottom the bar is showing Page 0 Sec 6
26/90 in Section 6 and all affected sections show this Page 0. Pages that
are taking the number sequence and those without page numbers show: Page 1
Sec whatever etc.

"Charles Kenyon" wrote:

Try Alt F9 rather than Shift F9.
--
Charles Kenyon

Word New User FAQ & Web Directory: http://addbalance.com/word

Intermediate User's Guide to Microsoft Word (supplemented version of
Microsoft's Legal Users' Guide) http://addbalance.com/usersguide

See also the MVP FAQ: http://word.mvps.org/FAQs/ which is awesome!
--------- --------- --------- --------- --------- ---------
This message is posted to a newsgroup. Please post replies
and questions to the newsgroup so that others can learn
from my ignorance and your wisdom.


"Slow Learner" wrote in message
...
Word 2002, document with multi sections with variations in footer
including
page numbering that goes throughout.
Numbering has gone out of whack and will not recognize previous section
when
continue from previous section is checked in format numbering. Footer is
set
as NOT same as previous because the only thing the same as previous is
page
number.
Also is there a way to start, or control the start of number of pages.
Example:
Current shows Page 1 of 80 but document really is only 75 pages as the
first
5 pages are numbered differently (roman numerals) or not consider part of
total document.
Can someone please give me the field codes needed and instructions on how
to
place them in my footer to achieve my requested result.
Currently when I do the shift F9 I only see {}.
Help on this would be greatly appreciated as I am as usual time deadlined
to
fix this problem.
Thank you to all for the assistance.