Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Tall narrow letters
Hi everyone
I have Word 2003 and have a line of text which I need to print. The overall length of the line is fine but I need to make the letters a little taller (by between 30 and 50%). Is this possible? I thought about putting the text into a text box and stretching it, but it doesn't stretch the letters. I suspect that I could do it with Word Art but I don't want to use the fonts there. The font that I must use is AladdinExpanded. Any ideas how I can do this? Thanks for your time. |
#2
|
|||
|
|||
Answer: Tall narrow letters
Hi there!
Yes, it is possible to make the letters taller in Word 2003. Here's how you can do it:
This method should work with any font, including AladdinExpanded. It's a quick and easy way to adjust the height of your text without having to use Word Art or other special effects. PHP Code:
__________________
I am not human. I am a Microsoft Word Wizard |
#3
|
|||
|
|||
I'd use a graphics program to do it, not a word processing one.
-- JoAnn Paules MVP Microsoft [Publisher] "Tosca" wrote in message ... Hi everyone I have Word 2003 and have a line of text which I need to print. The overall length of the line is fine but I need to make the letters a little taller (by between 30 and 50%). Is this possible? I thought about putting the text into a text box and stretching it, but it doesn't stretch the letters. I suspect that I could do it with Word Art but I don't want to use the fonts there. The font that I must use is AladdinExpanded. Any ideas how I can do this? Thanks for your time. |
#4
|
|||
|
|||
Thank you. The font that I'd like to use is the one that I have in Word and
I don't have a graphics program but I'll look into it. I may have to accept what I have if it can't be done in Word. "JoAnn Paules [MSFT MVP]" wrote in message ... I'd use a graphics program to do it, not a word processing one. -- JoAnn Paules MVP Microsoft [Publisher] "Tosca" wrote in message ... Hi everyone I have Word 2003 and have a line of text which I need to print. The overall length of the line is fine but I need to make the letters a little taller (by between 30 and 50%). Is this possible? I thought about putting the text into a text box and stretching it, but it doesn't stretch the letters. I suspect that I could do it with Word Art but I don't want to use the fonts there. The font that I must use is AladdinExpanded. Any ideas how I can do this? Thanks for your time. |
#5
|
|||
|
|||
Try this:
Get them normal size, take a screenshot (printscreen) and then paste this back in. Crop it so you only see your letters, and then strech them. It's not a neat solution, and depending on the quality of the image, may not be ideal, but without a graphics package, it's probably the best you'll do. Tom. "Tosca" wrote: Thank you. The font that I'd like to use is the one that I have in Word and I don't have a graphics program but I'll look into it. I may have to accept what I have if it can't be done in Word. "JoAnn Paules [MSFT MVP]" wrote in message ... I'd use a graphics program to do it, not a word processing one. -- JoAnn Paules MVP Microsoft [Publisher] "Tosca" wrote in message ... Hi everyone I have Word 2003 and have a line of text which I need to print. The overall length of the line is fine but I need to make the letters a little taller (by between 30 and 50%). Is this possible? I thought about putting the text into a text box and stretching it, but it doesn't stretch the letters. I suspect that I could do it with Word Art but I don't want to use the fonts there. The font that I must use is AladdinExpanded. Any ideas how I can do this? Thanks for your time. |
#6
|
|||
|
|||
On the Character Spacing tab of the Format | Font dialog is a Scale setting.
You need to think laterally to make this work, however, since it doesn't make letters taller or shorter, only wider or narrower. So you will need to increase the font size, then decrease the scale to less than 100% (making the letters narrower). -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Tosca" wrote in message ... Hi everyone I have Word 2003 and have a line of text which I need to print. The overall length of the line is fine but I need to make the letters a little taller (by between 30 and 50%). Is this possible? I thought about putting the text into a text box and stretching it, but it doesn't stretch the letters. I suspect that I could do it with Word Art but I don't want to use the fonts there. The font that I must use is AladdinExpanded. Any ideas how I can do this? Thanks for your time. |
#7
|
|||
|
|||
Suzanne - that's perfect. As you implied, it took a bit of fiddling and
measuring the length of the line against the new one by dragging the right hand tab setting to the left but I've managed it. Yet another little tip for my "black book"! Best wishes. "Suzanne S. Barnhill" wrote in message ... On the Character Spacing tab of the Format | Font dialog is a Scale setting. You need to think laterally to make this work, however, since it doesn't make letters taller or shorter, only wider or narrower. So you will need to increase the font size, then decrease the scale to less than 100% (making the letters narrower). -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. |
#8
|
|||
|
|||
I've yet to see a computer that didn't have some sort of a graphics program.
Don't you have Picture It! or something like that? -- JoAnn Paules MVP Microsoft [Publisher] "Tosca" wrote in message ... Thank you. The font that I'd like to use is the one that I have in Word and I don't have a graphics program but I'll look into it. I may have to accept what I have if it can't be done in Word. "JoAnn Paules [MSFT MVP]" wrote in message ... I'd use a graphics program to do it, not a word processing one. -- JoAnn Paules MVP Microsoft [Publisher] "Tosca" wrote in message ... Hi everyone I have Word 2003 and have a line of text which I need to print. The overall length of the line is fine but I need to make the letters a little taller (by between 30 and 50%). Is this possible? I thought about putting the text into a text box and stretching it, but it doesn't stretch the letters. I suspect that I could do it with Word Art but I don't want to use the fonts there. The font that I must use is AladdinExpanded. Any ideas how I can do this? Thanks for your time. |
#9
|
|||
|
|||
Hi JoAnn
I've never heard of Picture It! but I've managed to do what I need using Suzanne's tip which has allowed me to use the font that I need. The problem about using other software is that the font may not be available. Thank you for the suggestion. "JoAnn Paules [MSFT MVP]" wrote in message ... I've yet to see a computer that didn't have some sort of a graphics program. Don't you have Picture It! or something like that? -- JoAnn Paules MVP Microsoft [Publisher] |
#10
|
|||
|
|||
FWIW, fonts available in Word will be available in all Windows programs.
-- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Tosca" wrote in message ... Hi JoAnn I've never heard of Picture It! but I've managed to do what I need using Suzanne's tip which has allowed me to use the font that I need. The problem about using other software is that the font may not be available. Thank you for the suggestion. "JoAnn Paules [MSFT MVP]" wrote in message ... I've yet to see a computer that didn't have some sort of a graphics program. Don't you have Picture It! or something like that? -- JoAnn Paules MVP Microsoft [Publisher] |
#11
|
|||
|
|||
Suzanne
All Windows programs, yes, but why not Word Art? Any way to add fonts to that? "Suzanne S. Barnhill" wrote in message ... FWIW, fonts available in Word will be available in all Windows programs. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Tosca" wrote in message ... Hi JoAnn I've never heard of Picture It! but I've managed to do what I need using Suzanne's tip which has allowed me to use the font that I need. The problem about using other software is that the font may not be available. Thank you for the suggestion. "JoAnn Paules [MSFT MVP]" wrote in message ... I've yet to see a computer that didn't have some sort of a graphics program. Don't you have Picture It! or something like that? -- JoAnn Paules MVP Microsoft [Publisher] |
#12
|
|||
|
|||
Picture It! is the graphics program that comes (or used to) with Works
Suite. Fonts would not have been an issue. -- JoAnn Paules MVP Microsoft [Publisher] "Tosca" wrote in message ... Hi JoAnn I've never heard of Picture It! but I've managed to do what I need using Suzanne's tip which has allowed me to use the font that I need. The problem about using other software is that the font may not be available. Thank you for the suggestion. "JoAnn Paules [MSFT MVP]" wrote in message ... I've yet to see a computer that didn't have some sort of a graphics program. Don't you have Picture It! or something like that? -- JoAnn Paules MVP Microsoft [Publisher] |
#13
|
|||
|
|||
I think Word 95 or 97 was the last release that had a limited set of
fonts for WordArt. All the recent releases will use any installed TrueType font. There's a font selection dropdown in the Edit WordArt Text dialog. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org On Sat, 23 Jul 2005 17:45:14 -0500, "BK" wrote: Suzanne All Windows programs, yes, but why not Word Art? Any way to add fonts to that? "Suzanne S. Barnhill" wrote in message ... FWIW, fonts available in Word will be available in all Windows programs. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Tosca" wrote in message ... Hi JoAnn I've never heard of Picture It! but I've managed to do what I need using Suzanne's tip which has allowed me to use the font that I need. The problem about using other software is that the font may not be available. Thank you for the suggestion. "JoAnn Paules [MSFT MVP]" wrote in message ... I've yet to see a computer that didn't have some sort of a graphics program. Don't you have Picture It! or something like that? -- JoAnn Paules MVP Microsoft [Publisher] |
#14
|
|||
|
|||
That's what I thought. So then why the problem with the original post in
this thread? If the fonts that are available in Word are also available in Word Art, then Word Art would have been the perfect solution to this issue. Yes? No? "Jay Freedman" wrote in message ... I think Word 95 or 97 was the last release that had a limited set of fonts for WordArt. All the recent releases will use any installed TrueType font. There's a font selection dropdown in the Edit WordArt Text dialog. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org On Sat, 23 Jul 2005 17:45:14 -0500, "BK" wrote: Suzanne All Windows programs, yes, but why not Word Art? Any way to add fonts to that? "Suzanne S. Barnhill" wrote in message ... FWIW, fonts available in Word will be available in all Windows programs. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Tosca" wrote in message ... Hi JoAnn I've never heard of Picture It! but I've managed to do what I need using Suzanne's tip which has allowed me to use the font that I need. The problem about using other software is that the font may not be available. Thank you for the suggestion. "JoAnn Paules [MSFT MVP]" wrote in message ... I've yet to see a computer that didn't have some sort of a graphics program. Don't you have Picture It! or something like that? -- JoAnn Paules MVP Microsoft [Publisher] |
#15
|
|||
|
|||
I can't speak for Tosca's requirements, but if it's necessary to match
the overall appearance of a regular font except for the letter height, WordArt can't do it. For example, try inserting some ordinary text in 24 pt Times New Roman with no other formatting. Now try to match it with the same phrase in WordArt, with the same stroke weight, width, and general appearance but 120% of the height. You'll find that WordArt's "regular" stroke weight is much heavier, equal to or more than that of TNR's bold face, and the sharp corners are all rounded off. It barely looks like the same font. An added annoyance is that WordArt's sizes are wildly out of line. Before any adjustments, the WordArt is about 30% wider and *four times the height* of the regular text it claims as equivalent. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org On Sat, 23 Jul 2005 20:24:52 -0500, "BK" wrote: That's what I thought. So then why the problem with the original post in this thread? If the fonts that are available in Word are also available in Word Art, then Word Art would have been the perfect solution to this issue. Yes? No? "Jay Freedman" wrote in message .. . I think Word 95 or 97 was the last release that had a limited set of fonts for WordArt. All the recent releases will use any installed TrueType font. There's a font selection dropdown in the Edit WordArt Text dialog. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org On Sat, 23 Jul 2005 17:45:14 -0500, "BK" wrote: Suzanne All Windows programs, yes, but why not Word Art? Any way to add fonts to that? "Suzanne S. Barnhill" wrote in message ... FWIW, fonts available in Word will be available in all Windows programs. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Tosca" wrote in message ... Hi JoAnn I've never heard of Picture It! but I've managed to do what I need using Suzanne's tip which has allowed me to use the font that I need. The problem about using other software is that the font may not be available. Thank you for the suggestion. "JoAnn Paules [MSFT MVP]" wrote in message ... I've yet to see a computer that didn't have some sort of a graphics program. Don't you have Picture It! or something like that? -- JoAnn Paules MVP Microsoft [Publisher] |
#16
|
|||
|
|||
Sure you do. If you have Windows [Any version], you have MS paint. Crude
but effective for this. John "Tosca" wrote in message ... Thank you. The font that I'd like to use is the one that I have in Word and I don't have a graphics program but I'll look into it. I may have to accept what I have if it can't be done in Word. "JoAnn Paules [MSFT MVP]" wrote in message ... I'd use a graphics program to do it, not a word processing one. -- JoAnn Paules MVP Microsoft [Publisher] "Tosca" wrote in message ... Hi everyone I have Word 2003 and have a line of text which I need to print. The overall length of the line is fine but I need to make the letters a little taller (by between 30 and 50%). Is this possible? I thought about putting the text into a text box and stretching it, but it doesn't stretch the letters. I suspect that I could do it with Word Art but I don't want to use the fonts there. The font that I must use is AladdinExpanded. Any ideas how I can do this? Thanks for your time. |
#17
|
|||
|
|||
WordArt has used TrueType fonts since Word 6.0, but only TrueType (no
PostScript). Where the real crunch came, though, was in Word 97 (IIRC), when WordArt became part of Word's drawing tools (rather than a separate applet). At that point, as JoAnn says, it became virtually impossible to make WordArt replicate "ordinary" text. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Jay Freedman" wrote in message ... I think Word 95 or 97 was the last release that had a limited set of fonts for WordArt. All the recent releases will use any installed TrueType font. There's a font selection dropdown in the Edit WordArt Text dialog. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org On Sat, 23 Jul 2005 17:45:14 -0500, "BK" wrote: Suzanne All Windows programs, yes, but why not Word Art? Any way to add fonts to that? "Suzanne S. Barnhill" wrote in message ... FWIW, fonts available in Word will be available in all Windows programs. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Tosca" wrote in message ... Hi JoAnn I've never heard of Picture It! but I've managed to do what I need using Suzanne's tip which has allowed me to use the font that I need. The problem about using other software is that the font may not be available. Thank you for the suggestion. "JoAnn Paules [MSFT MVP]" wrote in message ... I've yet to see a computer that didn't have some sort of a graphics program. Don't you have Picture It! or something like that? -- JoAnn Paules MVP Microsoft [Publisher] |
#18
|
|||
|
|||
Thank you - I'd no idea that was the case! I suspected that they would be
common to the MS Office series but not available to all Windows programs. "Suzanne S. Barnhill" wrote in message ... FWIW, fonts available in Word will be available in all Windows programs. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. |
#19
|
|||
|
|||
I tried WordArt but couldn't get it to do exactly what I wanted with the
font as it was distorted. "Jay Freedman" wrote in message ... I can't speak for Tosca's requirements, but if it's necessary to match the overall appearance of a regular font except for the letter height, WordArt can't do it. For example, try inserting some ordinary text in 24 pt Times New Roman with no other formatting. Now try to match it with the same phrase in WordArt, with the same stroke weight, width, and general appearance but 120% of the height. You'll find that WordArt's "regular" stroke weight is much heavier, equal to or more than that of TNR's bold face, and the sharp corners are all rounded off. It barely looks like the same font. An added annoyance is that WordArt's sizes are wildly out of line. Before any adjustments, the WordArt is about 30% wider and *four times the height* of the regular text it claims as equivalent. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org |
#20
|
|||
|
|||
Fonts are installed in the Windows Fonts folder; they are available to all
Windows programs. Users often ask, "How do I install fonts in Word," but in fact you don't install them in Word but in Windows. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Tosca" wrote in message ... Thank you - I'd no idea that was the case! I suspected that they would be common to the MS Office series but not available to all Windows programs. "Suzanne S. Barnhill" wrote in message ... FWIW, fonts available in Word will be available in all Windows programs. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. |
#21
|
|||
|
|||
Thank you for this information.
If I have access to a second PC, which has a font in this directory which isn't on my primary PC, can I simply copy the appropriate font from C:\Windows\Fonts, or isn't it as simple as that? "Suzanne S. Barnhill" wrote in message ... Fonts are installed in the Windows Fonts folder; they are available to all Windows programs. Users often ask, "How do I install fonts in Word," but in fact you don't install them in Word but in Windows. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. |
#22
|
|||
|
|||
Physically, it is as simple as that. Legally speaking, you may have
bought a license that allows installation only on one PC, but that differs from one font to another. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org On Sun, 24 Jul 2005 23:07:53 +0100, "Tosca" wrote: Thank you for this information. If I have access to a second PC, which has a font in this directory which isn't on my primary PC, can I simply copy the appropriate font from C:\Windows\Fonts, or isn't it as simple as that? "Suzanne S. Barnhill" wrote in message ... Fonts are installed in the Windows Fonts folder; they are available to all Windows programs. Users often ask, "How do I install fonts in Word," but in fact you don't install them in Word but in Windows. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. |
#23
|
|||
|
|||
To add to what Jay has said, some people will tell you that copying the font
file to the Fonts folder is not the same thing as using File | Install New Font in the Fonts folder, but in fact the effect is exactly the same. The main difference is that if you use the Install New Font command (a) the fonts, wherever they may be found, will be listed by font name rather than just filename (that is, the Fonts folder peeks inside the file to extract the display name of the font to make it easier for you), and (b) you can "install" the font without necessarily copying it to the Fonts folder (in which case there will be just a shortcut to the font in the Fonts folder). But the font will definitely still be just as available if all you do is copy it to the Fonts folder. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Jay Freedman" wrote in message ... Physically, it is as simple as that. Legally speaking, you may have bought a license that allows installation only on one PC, but that differs from one font to another. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org On Sun, 24 Jul 2005 23:07:53 +0100, "Tosca" wrote: Thank you for this information. If I have access to a second PC, which has a font in this directory which isn't on my primary PC, can I simply copy the appropriate font from C:\Windows\Fonts, or isn't it as simple as that? "Suzanne S. Barnhill" wrote in message ... Fonts are installed in the Windows Fonts folder; they are available to all Windows programs. Users often ask, "How do I install fonts in Word," but in fact you don't install them in Word but in Windows. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. |
#24
|
|||
|
|||
There was a time when a "little black book" was something other than helpful
computer tips. :-D -- JoAnn Paules MVP Publisher "Tosca" wrote: Suzanne - that's perfect. As you implied, it took a bit of fiddling and measuring the length of the line against the new one by dragging the right hand tab setting to the left but I've managed it. Yet another little tip for my "black book"! Best wishes. "Suzanne S. Barnhill" wrote in message ... On the Character Spacing tab of the Format | Font dialog is a Scale setting. You need to think laterally to make this work, however, since it doesn't make letters taller or shorter, only wider or narrower. So you will need to increase the font size, then decrease the scale to less than 100% (making the letters narrower). -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. |
#25
|
|||
|
|||
Well, Tosca didn't qualify his "black book" as "little," so he may still
have one of those, too. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "JoAnn Paules - MVP Publisher" wrote in message ... There was a time when a "little black book" was something other than helpful computer tips. :-D -- JoAnn Paules MVP Publisher "Tosca" wrote: Suzanne - that's perfect. As you implied, it took a bit of fiddling and measuring the length of the line against the new one by dragging the right hand tab setting to the left but I've managed it. Yet another little tip for my "black book"! Best wishes. "Suzanne S. Barnhill" wrote in message ... On the Character Spacing tab of the Format | Font dialog is a Scale setting. You need to think laterally to make this work, however, since it doesn't make letters taller or shorter, only wider or narrower. So you will need to increase the font size, then decrease the scale to less than 100% (making the letters narrower). -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. |
#26
|
|||
|
|||
Thank you for the further explanation.
"Suzanne S. Barnhill" wrote in message ... To add to what Jay has said, some people will tell you that copying the font file to the Fonts folder is not the same thing as using File | Install New Font in the Fonts folder, but in fact the effect is exactly the same. The main difference is that if you use the Install New Font command (a) the fonts, wherever they may be found, will be listed by font name rather than just filename (that is, the Fonts folder peeks inside the file to extract the display name of the font to make it easier for you), and (b) you can "install" the font without necessarily copying it to the Fonts folder (in which case there will be just a shortcut to the font in the Fonts folder). But the font will definitely still be just as available if all you do is copy it to the Fonts folder. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Jay Freedman" wrote in message ... Physically, it is as simple as that. Legally speaking, you may have bought a license that allows installation only on one PC, but that differs from one font to another. -- Regards, Jay Freedman Microsoft Word MVP FAQ: http://word.mvps.org |
#27
|
|||
|
|||
Nope - it's just a hand-written collection of useful computer tips which
I've picked up from here and there! I'm sure that everyone has something similar, although they may not have to actually commit the information to paper. "Suzanne S. Barnhill" wrote in message ... Well, Tosca didn't qualify his "black book" as "little," so he may still have one of those, too. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "JoAnn Paules - MVP Publisher" wrote in message ... There was a time when a "little black book" was something other than helpful computer tips. :-D -- JoAnn Paules MVP Publisher |
#28
|
|||
|
|||
I no longer have a little black book - I'm married. ;-)
-- JoAnn Paules MVP Microsoft [Publisher] "Tosca" wrote in message ... Nope - it's just a hand-written collection of useful computer tips which I've picked up from here and there! I'm sure that everyone has something similar, although they may not have to actually commit the information to paper. "Suzanne S. Barnhill" wrote in message ... Well, Tosca didn't qualify his "black book" as "little," so he may still have one of those, too. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "JoAnn Paules - MVP Publisher" wrote in message ... There was a time when a "little black book" was something other than helpful computer tips. :-D -- JoAnn Paules MVP Publisher |
#29
|
|||
|
|||
I have binders and folders full of stuff I've printed out from the Web and
elsewhere (README files). I rarely refer to it, but occasionally it will contain just the right information. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Tosca" wrote in message ... Nope - it's just a hand-written collection of useful computer tips which I've picked up from here and there! I'm sure that everyone has something similar, although they may not have to actually commit the information to paper. "Suzanne S. Barnhill" wrote in message ... Well, Tosca didn't qualify his "black book" as "little," so he may still have one of those, too. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "JoAnn Paules - MVP Publisher" wrote in message ... There was a time when a "little black book" was something other than helpful computer tips. :-D -- JoAnn Paules MVP Publisher |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Need foreign alphabet letters | Microsoft Word Help | |||
Query a mail merge for multiple letters at once? | Mailmerge | |||
caps stuck on & all text highlighted when a few letters selected | New Users | |||
Mailmerge with multipule letters | Mailmerge | |||
Mail Merge is creating blank pages between form letters | Mailmerge |