Home |
Search |
Today's Posts |
#1
|
|||
|
|||
printing problem with envelopes
I recently put a new priner cartridge in my brother hl-1440 printer and
since the new cartridge went in, I can not print envelopes correctly or labels correctly from Word 2000. The orientation is wrong on the envelopes and labels, it is printing portrait orientation, even though it has landscape in the print menu. I can print letters, faxes and everything else just fine. It is as if my envelopes and labels want to print as 8x 10 letters. Help Linda |
#2
|
|||
|
|||
Hi ?B?TGluZGFE?=,
I recently put a new priner cartridge in my brother hl-1440 printer and since the new cartridge went in, I can not print envelopes correctly or labels correctly from Word 2000. The orientation is wrong on the envelopes and labels, it is printing portrait orientation, even though it has landscape in the print menu. I can print letters, faxes and everything else just fine. It is as if my envelopes and labels want to print as 8x 10 letters. The better place to ask this would be the word.printing.fonts newsgroup. that's where you'll find people who are familiar with printers and related problems. My best guess would be that your printer driver has "gone bad", and that replacing it with the newest one from the manufacturer's website might solve the problem. Although why this would coincide with replacing a cartridge I can't imagine... Cindy Meister INTER-Solutions, Switzerland http://homepage.swissonline.ch/cindymeister (last update Jun 8 2004) http://www.word.mvps.org This reply is posted in the Newsgroup; please post any follow question or reply in the newsgroup and not by e-mail :-) |
#3
|
|||
|
|||
I have the same problem with an HP 7150 DeskJet using Word 2003 SP1. It has
something to do with custom envelope sizes. If I choose a standard size (e.g. 6 or 10) and feed the envelope through the envelope slot, everything is fine. If I feed the standard envelope through the paper slot, this also works correctly. When I set up a custom envelope (e.g. 8.5 x 5) and feed the envelope though the paper slot, properly right aligned, the printer prints as though it was printing to a full sized sheet of paper and not the envelope. The result is that the return address is not printed on the envelope and the address is almost 1 inch from the top of the envelope. The printer will not let me place the envelope centered in the feeder, it has to be right aligned or the paper out sensor fires. I have seen this happen on other HP printers and have usually been able to work around the problem by printing an adhesive label. Bottom line is that I cannot use the printer to print directly to custom sized envelopes -- regards, Larry "Cindy M -WordMVP-" wrote in message news:VA.0000ad92.005cd66b@speedy... Hi ?B?TGluZGFE?=, I recently put a new priner cartridge in my brother hl-1440 printer and since the new cartridge went in, I can not print envelopes correctly or labels correctly from Word 2000. The orientation is wrong on the envelopes and labels, it is printing portrait orientation, even though it has landscape in the print menu. I can print letters, faxes and everything else just fine. It is as if my envelopes and labels want to print as 8x 10 letters. The better place to ask this would be the word.printing.fonts newsgroup. that's where you'll find people who are familiar with printers and related problems. My best guess would be that your printer driver has "gone bad", and that replacing it with the newest one from the manufacturer's website might solve the problem. Although why this would coincide with replacing a cartridge I can't imagine... Cindy Meister INTER-Solutions, Switzerland http://homepage.swissonline.ch/cindymeister (last update Jun 8 2004) http://www.word.mvps.org This reply is posted in the Newsgroup; please post any follow question or reply in the newsgroup and not by e-mail :-) |
#4
|
|||
|
|||
You can do it by setting up the envelope address on a Letter-sized document.
Adjust the margins to place the address where it needs to be to print on the envelope. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Dr. Larry Doe" wrote in message ... I have the same problem with an HP 7150 DeskJet using Word 2003 SP1. It has something to do with custom envelope sizes. If I choose a standard size (e.g. 6 or 10) and feed the envelope through the envelope slot, everything is fine. If I feed the standard envelope through the paper slot, this also works correctly. When I set up a custom envelope (e.g. 8.5 x 5) and feed the envelope though the paper slot, properly right aligned, the printer prints as though it was printing to a full sized sheet of paper and not the envelope. The result is that the return address is not printed on the envelope and the address is almost 1 inch from the top of the envelope. The printer will not let me place the envelope centered in the feeder, it has to be right aligned or the paper out sensor fires. I have seen this happen on other HP printers and have usually been able to work around the problem by printing an adhesive label. Bottom line is that I cannot use the printer to print directly to custom sized envelopes -- regards, Larry "Cindy M -WordMVP-" wrote in message news:VA.0000ad92.005cd66b@speedy... Hi ?B?TGluZGFE?=, I recently put a new priner cartridge in my brother hl-1440 printer and since the new cartridge went in, I can not print envelopes correctly or labels correctly from Word 2000. The orientation is wrong on the envelopes and labels, it is printing portrait orientation, even though it has landscape in the print menu. I can print letters, faxes and everything else just fine. It is as if my envelopes and labels want to print as 8x 10 letters. The better place to ask this would be the word.printing.fonts newsgroup. that's where you'll find people who are familiar with printers and related problems. My best guess would be that your printer driver has "gone bad", and that replacing it with the newest one from the manufacturer's website might solve the problem. Although why this would coincide with replacing a cartridge I can't imagine... Cindy Meister INTER-Solutions, Switzerland http://homepage.swissonline.ch/cindymeister (last update Jun 8 2004) http://www.word.mvps.org This reply is posted in the Newsgroup; please post any follow question or reply in the newsgroup and not by e-mail :-) |
#5
|
|||
|
|||
Sure,
But does that not completely defeat the reason for having envelope templates? It works on my trusty HP 4P; but not on the newer 7150. It used to work for all printers, but I recall a change between Office 7 and Office 8 in the way that the envelope templates work. That is when this problem started. Thanks for the suggestion. -- regards, Larry "Suzanne S. Barnhill" wrote in message ... You can do it by setting up the envelope address on a Letter-sized document. Adjust the margins to place the address where it needs to be to print on the envelope. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Dr. Larry Doe" wrote in message ... I have the same problem with an HP 7150 DeskJet using Word 2003 SP1. It has something to do with custom envelope sizes. If I choose a standard size (e.g. 6 or 10) and feed the envelope through the envelope slot, everything is fine. If I feed the standard envelope through the paper slot, this also works correctly. When I set up a custom envelope (e.g. 8.5 x 5) and feed the envelope though the paper slot, properly right aligned, the printer prints as though it was printing to a full sized sheet of paper and not the envelope. The result is that the return address is not printed on the envelope and the address is almost 1 inch from the top of the envelope. The printer will not let me place the envelope centered in the feeder, it has to be right aligned or the paper out sensor fires. I have seen this happen on other HP printers and have usually been able to work around the problem by printing an adhesive label. Bottom line is that I cannot use the printer to print directly to custom sized envelopes -- regards, Larry "Cindy M -WordMVP-" wrote in message news:VA.0000ad92.005cd66b@speedy... Hi ?B?TGluZGFE?=, I recently put a new priner cartridge in my brother hl-1440 printer and since the new cartridge went in, I can not print envelopes correctly or labels correctly from Word 2000. The orientation is wrong on the envelopes and labels, it is printing portrait orientation, even though it has landscape in the print menu. I can print letters, faxes and everything else just fine. It is as if my envelopes and labels want to print as 8x 10 letters. The better place to ask this would be the word.printing.fonts newsgroup. that's where you'll find people who are familiar with printers and related problems. My best guess would be that your printer driver has "gone bad", and that replacing it with the newest one from the manufacturer's website might solve the problem. Although why this would coincide with replacing a cartridge I can't imagine... Cindy Meister INTER-Solutions, Switzerland http://homepage.swissonline.ch/cindymeister (last update Jun 8 2004) http://www.word.mvps.org This reply is posted in the Newsgroup; please post any follow question or reply in the newsgroup and not by e-mail :-) |
#6
|
|||
|
|||
Some printers handle custom sizes better than others. If the printer allows
you to define new paper sizes (in the printer driver, not just in Word), you may be able to work around this. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Dr. Larry Doe" wrote in message ... Sure, But does that not completely defeat the reason for having envelope templates? It works on my trusty HP 4P; but not on the newer 7150. It used to work for all printers, but I recall a change between Office 7 and Office 8 in the way that the envelope templates work. That is when this problem started. Thanks for the suggestion. -- regards, Larry "Suzanne S. Barnhill" wrote in message ... You can do it by setting up the envelope address on a Letter-sized document. Adjust the margins to place the address where it needs to be to print on the envelope. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Dr. Larry Doe" wrote in message ... I have the same problem with an HP 7150 DeskJet using Word 2003 SP1. It has something to do with custom envelope sizes. If I choose a standard size (e.g. 6 or 10) and feed the envelope through the envelope slot, everything is fine. If I feed the standard envelope through the paper slot, this also works correctly. When I set up a custom envelope (e.g. 8.5 x 5) and feed the envelope though the paper slot, properly right aligned, the printer prints as though it was printing to a full sized sheet of paper and not the envelope. The result is that the return address is not printed on the envelope and the address is almost 1 inch from the top of the envelope. The printer will not let me place the envelope centered in the feeder, it has to be right aligned or the paper out sensor fires. I have seen this happen on other HP printers and have usually been able to work around the problem by printing an adhesive label. Bottom line is that I cannot use the printer to print directly to custom sized envelopes -- regards, Larry "Cindy M -WordMVP-" wrote in message news:VA.0000ad92.005cd66b@speedy... Hi ?B?TGluZGFE?=, I recently put a new priner cartridge in my brother hl-1440 printer and since the new cartridge went in, I can not print envelopes correctly or labels correctly from Word 2000. The orientation is wrong on the envelopes and labels, it is printing portrait orientation, even though it has landscape in the print menu. I can print letters, faxes and everything else just fine. It is as if my envelopes and labels want to print as 8x 10 letters. The better place to ask this would be the word.printing.fonts newsgroup. that's where you'll find people who are familiar with printers and related problems. My best guess would be that your printer driver has "gone bad", and that replacing it with the newest one from the manufacturer's website might solve the problem. Although why this would coincide with replacing a cartridge I can't imagine... Cindy Meister INTER-Solutions, Switzerland http://homepage.swissonline.ch/cindymeister (last update Jun 8 2004) http://www.word.mvps.org This reply is posted in the Newsgroup; please post any follow question or reply in the newsgroup and not by e-mail :-) |
#7
|
|||
|
|||
I seem to recall something about reading a manual or at least looking at the
available options. Problem solved. Tools/Envelopes and Labels/Options/Printing Options from here, select the way the envelope feeds; in the case of my 7150, it is right, face down. Other printers feed center or left, face up or down. Take your pick. Waste a few envelopes or cut some paper stock to envelop size to test. These changes become part of normal.dot and will apply to all envelopes, standard sized or custom. Occam's razor at its best. Linda, I cannot imagine how changing your cartridge would change this setting, but let's hope that this fixes you problem. -- regards, Larry "Suzanne S. Barnhill" wrote in message ... Some printers handle custom sizes better than others. If the printer allows you to define new paper sizes (in the printer driver, not just in Word), you may be able to work around this. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Dr. Larry Doe" wrote in message ... Sure, But does that not completely defeat the reason for having envelope templates? It works on my trusty HP 4P; but not on the newer 7150. It used to work for all printers, but I recall a change between Office 7 and Office 8 in the way that the envelope templates work. That is when this problem started. Thanks for the suggestion. -- regards, Larry "Suzanne S. Barnhill" wrote in message ... You can do it by setting up the envelope address on a Letter-sized document. Adjust the margins to place the address where it needs to be to print on the envelope. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "Dr. Larry Doe" wrote in message ... I have the same problem with an HP 7150 DeskJet using Word 2003 SP1. It has something to do with custom envelope sizes. If I choose a standard size (e.g. 6 or 10) and feed the envelope through the envelope slot, everything is fine. If I feed the standard envelope through the paper slot, this also works correctly. When I set up a custom envelope (e.g. 8.5 x 5) and feed the envelope though the paper slot, properly right aligned, the printer prints as though it was printing to a full sized sheet of paper and not the envelope. The result is that the return address is not printed on the envelope and the address is almost 1 inch from the top of the envelope. The printer will not let me place the envelope centered in the feeder, it has to be right aligned or the paper out sensor fires. I have seen this happen on other HP printers and have usually been able to work around the problem by printing an adhesive label. Bottom line is that I cannot use the printer to print directly to custom sized envelopes -- regards, Larry "Cindy M -WordMVP-" wrote in message news:VA.0000ad92.005cd66b@speedy... Hi ?B?TGluZGFE?=, I recently put a new priner cartridge in my brother hl-1440 printer and since the new cartridge went in, I can not print envelopes correctly or labels correctly from Word 2000. The orientation is wrong on the envelopes and labels, it is printing portrait orientation, even though it has landscape in the print menu. I can print letters, faxes and everything else just fine. It is as if my envelopes and labels want to print as 8x 10 letters. The better place to ask this would be the word.printing.fonts newsgroup. that's where you'll find people who are familiar with printers and related problems. My best guess would be that your printer driver has "gone bad", and that replacing it with the newest one from the manufacturer's website might solve the problem. Although why this would coincide with replacing a cartridge I can't imagine... Cindy Meister INTER-Solutions, Switzerland http://homepage.swissonline.ch/cindymeister (last update Jun 8 2004) http://www.word.mvps.org This reply is posted in the Newsgroup; please post any follow question or reply in the newsgroup and not by e-mail :-) |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Word Printing Problem | Microsoft Word Help | |||
Printing problem - double images | Microsoft Word Help | |||
Printing Envelopes to a Phaser 8400 | Microsoft Word Help | |||
Problem printing envelopes from word | New Users | |||
Problems with Printing Envelopes in Word 2003 | Microsoft Word Help |