Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to microsoft.public.word.pagelayout
LouLouLou LouLouLou is offline
external usenet poster
 
Posts: 1
Default Go to end of document as default when opening it

I want to be able to go to the end of a document rather than the beginning,
when the document is opened.
  #2   Report Post  
Posted to microsoft.public.word.pagelayout
Herb Tyson [MVP] Herb Tyson [MVP] is offline
external usenet poster
 
Posts: 2,936
Default Go to end of document as default when opening it

You can accomplish this in several ways. If you want to do this with a
single document, record a macro that captures you pressing Ctrl+End, naming
it AutoOpen, and store it in the document you want to affect.

If you want to do this for all documents, record the macro (same
name/action), and store it in Normal.dot.

Specific instructions:

Tools - Macro - Record new Macro.

Macro name: AutoOpen

Store macro in: current document or Normal.dot, as desired.

Click OK.

Press Ctrl+End.

Click Stop Recording.

Press Shift and click File, then click Save All, saying Yes to saving
changes to the current document and/or normal.dot (if appropriate), when and
if prompted.


--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"LouLouLou" wrote in message
...
I want to be able to go to the end of a document rather than the beginning,
when the document is opened.


  #3   Report Post  
Posted to microsoft.public.word.pagelayout
Suzanne S. Barnhill Suzanne S. Barnhill is offline
external usenet poster
 
Posts: 33,624
Default Go to end of document as default when opening it

I would respectfully submit that it's a lot easier just to press Ctrl+End
when you open the document than to have to click OK to a dialog asking if
you want to enable macros.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Herb Tyson [MVP]" wrote in message
...
You can accomplish this in several ways. If you want to do this with a
single document, record a macro that captures you pressing Ctrl+End,

naming
it AutoOpen, and store it in the document you want to affect.

If you want to do this for all documents, record the macro (same
name/action), and store it in Normal.dot.

Specific instructions:

Tools - Macro - Record new Macro.

Macro name: AutoOpen

Store macro in: current document or Normal.dot, as desired.

Click OK.

Press Ctrl+End.

Click Stop Recording.

Press Shift and click File, then click Save All, saying Yes to saving
changes to the current document and/or normal.dot (if appropriate), when

and
if prompted.


--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"LouLouLou" wrote in message
...
I want to be able to go to the end of a document rather than the

beginning,
when the document is opened.



  #4   Report Post  
Posted to microsoft.public.word.pagelayout
Herb Tyson [MVP] Herb Tyson [MVP] is offline
external usenet poster
 
Posts: 2,936
Default Go to end of document as default when opening it

It depends on your settings... I don't get a dialog asking to enable macros.

But, I do agree that Ctrl+End is pretty easy. :-)

--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"Suzanne S. Barnhill" wrote in message
...
I would respectfully submit that it's a lot easier just to press Ctrl+End
when you open the document than to have to click OK to a dialog asking if
you want to enable macros.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup
so
all may benefit.

"Herb Tyson [MVP]" wrote in message
...
You can accomplish this in several ways. If you want to do this with a
single document, record a macro that captures you pressing Ctrl+End,

naming
it AutoOpen, and store it in the document you want to affect.

If you want to do this for all documents, record the macro (same
name/action), and store it in Normal.dot.

Specific instructions:

Tools - Macro - Record new Macro.

Macro name: AutoOpen

Store macro in: current document or Normal.dot, as desired.

Click OK.

Press Ctrl+End.

Click Stop Recording.

Press Shift and click File, then click Save All, saying Yes to saving
changes to the current document and/or normal.dot (if appropriate), when

and
if prompted.


--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"LouLouLou" wrote in message
...
I want to be able to go to the end of a document rather than the

beginning,
when the document is opened.




  #5   Report Post  
Posted to microsoft.public.word.pagelayout
Suzanne S. Barnhill Suzanne S. Barnhill is offline
external usenet poster
 
Posts: 33,624
Default Go to end of document as default when opening it

You have macro security set to Low?

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Herb Tyson [MVP]" wrote in message
...
It depends on your settings... I don't get a dialog asking to enable

macros.

But, I do agree that Ctrl+End is pretty easy. :-)

--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"Suzanne S. Barnhill" wrote in message
...
I would respectfully submit that it's a lot easier just to press Ctrl+End
when you open the document than to have to click OK to a dialog asking

if
you want to enable macros.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup
so
all may benefit.

"Herb Tyson [MVP]" wrote in message
...
You can accomplish this in several ways. If you want to do this with a
single document, record a macro that captures you pressing Ctrl+End,

naming
it AutoOpen, and store it in the document you want to affect.

If you want to do this for all documents, record the macro (same
name/action), and store it in Normal.dot.

Specific instructions:

Tools - Macro - Record new Macro.

Macro name: AutoOpen

Store macro in: current document or Normal.dot, as desired.

Click OK.

Press Ctrl+End.

Click Stop Recording.

Press Shift and click File, then click Save All, saying Yes to saving
changes to the current document and/or normal.dot (if appropriate),

when
and
if prompted.


--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"LouLouLou" wrote in message
...
I want to be able to go to the end of a document rather than the

beginning,
when the document is opened.






  #6   Report Post  
Posted to microsoft.public.word.pagelayout
Herb Tyson [MVP] Herb Tyson [MVP] is offline
external usenet poster
 
Posts: 2,936
Default Go to end of document as default when opening it

No. I set Word to trust the macros I write. Everything else is carefully
vetted before being "trusted".

--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"Suzanne S. Barnhill" wrote in message
...
You have macro security set to Low?

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup
so
all may benefit.

"Herb Tyson [MVP]" wrote in message
...
It depends on your settings... I don't get a dialog asking to enable

macros.

But, I do agree that Ctrl+End is pretty easy. :-)

--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"Suzanne S. Barnhill" wrote in message
...
I would respectfully submit that it's a lot easier just to press
Ctrl+End
when you open the document than to have to click OK to a dialog asking

if
you want to enable macros.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup
so
all may benefit.

"Herb Tyson [MVP]" wrote in message
...
You can accomplish this in several ways. If you want to do this with a
single document, record a macro that captures you pressing Ctrl+End,
naming
it AutoOpen, and store it in the document you want to affect.

If you want to do this for all documents, record the macro (same
name/action), and store it in Normal.dot.

Specific instructions:

Tools - Macro - Record new Macro.

Macro name: AutoOpen

Store macro in: current document or Normal.dot, as desired.

Click OK.

Press Ctrl+End.

Click Stop Recording.

Press Shift and click File, then click Save All, saying Yes to saving
changes to the current document and/or normal.dot (if appropriate),

when
and
if prompted.


--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"LouLouLou" wrote in message
...
I want to be able to go to the end of a document rather than the
beginning,
when the document is opened.





  #7   Report Post  
Posted to microsoft.public.word.pagelayout
Suzanne S. Barnhill Suzanne S. Barnhill is offline
external usenet poster
 
Posts: 33,624
Default Go to end of document as default when opening it

I believe that's a new option in Word 2007? In older versions there's no way
to trust macros except in certain folders.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Herb Tyson [MVP]" wrote in message
...
No. I set Word to trust the macros I write. Everything else is carefully
vetted before being "trusted".

--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"Suzanne S. Barnhill" wrote in message
...
You have macro security set to Low?

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup
so
all may benefit.

"Herb Tyson [MVP]" wrote in message
...
It depends on your settings... I don't get a dialog asking to enable

macros.

But, I do agree that Ctrl+End is pretty easy. :-)

--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"Suzanne S. Barnhill" wrote in message
...
I would respectfully submit that it's a lot easier just to press
Ctrl+End
when you open the document than to have to click OK to a dialog

asking
if
you want to enable macros.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup
so
all may benefit.

"Herb Tyson [MVP]" wrote in message
...
You can accomplish this in several ways. If you want to do this with

a
single document, record a macro that captures you pressing Ctrl+End,
naming
it AutoOpen, and store it in the document you want to affect.

If you want to do this for all documents, record the macro (same
name/action), and store it in Normal.dot.

Specific instructions:

Tools - Macro - Record new Macro.

Macro name: AutoOpen

Store macro in: current document or Normal.dot, as desired.

Click OK.

Press Ctrl+End.

Click Stop Recording.

Press Shift and click File, then click Save All, saying Yes to

saving
changes to the current document and/or normal.dot (if appropriate),

when
and
if prompted.


--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"LouLouLou" wrote in message
...
I want to be able to go to the end of a document rather than the
beginning,
when the document is opened.






  #8   Report Post  
Posted to microsoft.public.word.pagelayout
Robert Robert is offline
external usenet poster
 
Posts: 122
Default Go to end of document as default when opening it

On Sat, 15 Sep 2007 01:48:00 -0700, LouLouLou wrote:

I want to be able to go to the end of a document rather than the beginning,
when the document is opened.


You can right-click the vertical scrollbar and choose "End".
--
Cheers
Robert
  #9   Report Post  
Posted to microsoft.public.word.pagelayout
Herb Tyson [MVP] Herb Tyson [MVP] is offline
external usenet poster
 
Posts: 2,936
Default Go to end of document as default when opening it

There might be some new options in Word 2003 (don't have an earlier version
to test), and there definitely are some new/better options in Word 2007.
However, in Word 2003, there's: Tools - Macro - Security - Trusted
Publishers tab. "Trust all installed add-ins and templates" and "Trust
access to Visual Basic Project". Enabling both these options [almost always]
prevents me from seeing the Enable Macros? popup for macros I've written,
while still popping up for foreign macros.

--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"Suzanne S. Barnhill" wrote in message
...
I believe that's a new option in Word 2007? In older versions there's no
way
to trust macros except in certain folders.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup
so
all may benefit.

"Herb Tyson [MVP]" wrote in message
...
No. I set Word to trust the macros I write. Everything else is carefully
vetted before being "trusted".

--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"Suzanne S. Barnhill" wrote in message
...
You have macro security set to Low?

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup
so
all may benefit.

"Herb Tyson [MVP]" wrote in message
...
It depends on your settings... I don't get a dialog asking to enable
macros.

But, I do agree that Ctrl+End is pretty easy. :-)

--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"Suzanne S. Barnhill" wrote in message
...
I would respectfully submit that it's a lot easier just to press
Ctrl+End
when you open the document than to have to click OK to a dialog

asking
if
you want to enable macros.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup
so
all may benefit.

"Herb Tyson [MVP]" wrote in message
...
You can accomplish this in several ways. If you want to do this
with

a
single document, record a macro that captures you pressing
Ctrl+End,
naming
it AutoOpen, and store it in the document you want to affect.

If you want to do this for all documents, record the macro (same
name/action), and store it in Normal.dot.

Specific instructions:

Tools - Macro - Record new Macro.

Macro name: AutoOpen

Store macro in: current document or Normal.dot, as desired.

Click OK.

Press Ctrl+End.

Click Stop Recording.

Press Shift and click File, then click Save All, saying Yes to

saving
changes to the current document and/or normal.dot (if appropriate),
when
and
if prompted.


--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"LouLouLou" wrote in message
...
I want to be able to go to the end of a document rather than the
beginning,
when the document is opened.







  #10   Report Post  
Posted to microsoft.public.word.pagelayout
Suzanne S. Barnhill Suzanne S. Barnhill is offline
external usenet poster
 
Posts: 33,624
Default Go to end of document as default when opening it

Okay, I have the first checked but not the second. The first just covers
macros in documents/templates in the user templates, workgroup templates,
and Word Startup folders (but not in the Office Startup folder).

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Herb Tyson [MVP]" wrote in message
...
There might be some new options in Word 2003 (don't have an earlier

version
to test), and there definitely are some new/better options in Word 2007.
However, in Word 2003, there's: Tools - Macro - Security - Trusted
Publishers tab. "Trust all installed add-ins and templates" and "Trust
access to Visual Basic Project". Enabling both these options [almost

always]
prevents me from seeing the Enable Macros? popup for macros I've written,
while still popping up for foreign macros.

--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"Suzanne S. Barnhill" wrote in message
...
I believe that's a new option in Word 2007? In older versions there's no
way
to trust macros except in certain folders.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup
so
all may benefit.

"Herb Tyson [MVP]" wrote in message
...
No. I set Word to trust the macros I write. Everything else is

carefully
vetted before being "trusted".

--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"Suzanne S. Barnhill" wrote in message
...
You have macro security set to Low?

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup
so
all may benefit.

"Herb Tyson [MVP]" wrote in message
...
It depends on your settings... I don't get a dialog asking to enable
macros.

But, I do agree that Ctrl+End is pretty easy. :-)

--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"Suzanne S. Barnhill" wrote in message
...
I would respectfully submit that it's a lot easier just to press
Ctrl+End
when you open the document than to have to click OK to a dialog

asking
if
you want to enable macros.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup
so
all may benefit.

"Herb Tyson [MVP]" wrote in message
...
You can accomplish this in several ways. If you want to do this
with

a
single document, record a macro that captures you pressing
Ctrl+End,
naming
it AutoOpen, and store it in the document you want to affect.

If you want to do this for all documents, record the macro (same
name/action), and store it in Normal.dot.

Specific instructions:

Tools - Macro - Record new Macro.

Macro name: AutoOpen

Store macro in: current document or Normal.dot, as desired.

Click OK.

Press Ctrl+End.

Click Stop Recording.

Press Shift and click File, then click Save All, saying Yes to

saving
changes to the current document and/or normal.dot (if

appropriate),
when
and
if prompted.


--
Herb Tyson MS MVP
Author of the Word 2007 Bible
Blog: http://word2007bible.herbtyson.com
Web: http://www.herbtyson.com


"LouLouLou" wrote in

message
...
I want to be able to go to the end of a document rather than the
beginning,
when the document is opened.








Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Default Opening File Charlie Microsoft Word Help 2 May 13th 06 05:26 PM
Is there a way to default the opening of a document hiding markup. Linda Page Layout 4 April 19th 06 04:55 PM
how to delete text on default opening document SanBenitoBill Microsoft Word Help 1 March 11th 06 11:50 PM
default window when opening word rhanusa Microsoft Word Help 1 December 1st 05 11:53 PM
Default beep when opening document Malkavian Microsoft Word Help 0 August 15th 05 02:04 AM


All times are GMT +1. The time now is 03:02 AM.

Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Microsoft Office Word Forum - WordBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Word"