Reply
 
Thread Tools Display Modes
  #1   Report Post  
Berenice
 
Posts: n/a
Default How do I view and edit pictures/graphics in the Print Layout view?

This is totally screwing up the updating of my textbook for Office 2003......

I need a full page view where I can see my graphics, edit and format
them......

The Reading Layout is too small [doesn't allow you to fill the screen with
one page] and I don't have access to all the formatting as with Office
2000....

Uggggh!! New is not always better.

Is there a solution????



  #2   Report Post  
Bob Buckland ?:-\)
 
Posts: n/a
Default

Hi Berenice,

You can turn off the reading layout view on startup
in Tools=Options in Word. The other views in Word
(except for the 'thumbnails' view are basically the
same in Word 2000 and 2003.

========
"Berenice" wrote in message ...
This is totally screwing up the updating of my textbook for Office 2003......

I need a full page view where I can see my graphics, edit and format
them......

The Reading Layout is too small [doesn't allow you to fill the screen with
one page] and I don't have access to all the formatting as with Office
2000....

Uggggh!! New is not always better.

Is there a solution????
--
Let us know if this helped you,

Bob Buckland ?:-)
MS Office System Products MVP

*Courtesy is not expensive and can pay big dividends*

Office 2003 Editions explained
http://www.microsoft.com/uk/office/editions.mspx





  #3   Report Post  
Suzanne S. Barnhill
 
Posts: n/a
Default

Select "Whole Page" in Print Layout view. Or if, by "full page" you mean
Full Screen, then select that option.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Berenice" wrote in message
...
This is totally screwing up the updating of my textbook for Office

2003......

I need a full page view where I can see my graphics, edit and format
them......

The Reading Layout is too small [doesn't allow you to fill the screen with
one page] and I don't have access to all the formatting as with Office
2000....

Uggggh!! New is not always better.

Is there a solution????




  #4   Report Post  
Berenice
 
Posts: n/a
Default

Thanks for your reply,

But I don't want to turn off the Reading Layout....

My whole textbook is about how to use Microsoft Office (Word, etc.) and I
can't expect my students to screw around with major software tweaks -
especially if even I can't find out where to change - &gt - in Tools as you
suggest.

I just want to use the Print Layout view as I have been and STILL be able to
see my graphics, edit them and do all the things that could be done in the
2000 and 98 versions.

All I can get now is a blank place-holder where a graphic is and yet it's
there when using Print Preview.

I need to be able to adapt my textbook to incorporate the "few" changes in
2003 so that all students using these versions of Office can use the textbook.

Hope there is a solution out there.

Thanks again
Berenice



===============
"Berenice" wrote:

This is totally screwing up the updating of my textbook for Office 2003......

I need a full page view where I can see my graphics, edit and format
them......

The Reading Layout is too small [doesn't allow you to fill the screen with
one page] and I don't have access to all the formatting as with Office
2000....

Uggggh!! New is not always better.

Is there a solution????



  #5   Report Post  
Suzanne S. Barnhill
 
Posts: n/a
Default

There is no reason why you should not be able to see your graphics in Print
Layout view. Check http://word.mvps.org/FAQs/DrwGrphcs/...leGraphics.htm
for some possibilities; also, if you're seeing field codes instead of
graphics, press Alt+F9.

FWIW, I don't consider a Tools | Options setting a "major software tweak";
one of the first things Word users should learn is how to customize Word to
look and work the way they want.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Berenice" wrote in message
...
Thanks for your reply,

But I don't want to turn off the Reading Layout....

My whole textbook is about how to use Microsoft Office (Word, etc.) and I
can't expect my students to screw around with major software tweaks -
especially if even I can't find out where to change - &gt - in Tools as

you
suggest.

I just want to use the Print Layout view as I have been and STILL be able

to
see my graphics, edit them and do all the things that could be done in the
2000 and 98 versions.

All I can get now is a blank place-holder where a graphic is and yet it's
there when using Print Preview.

I need to be able to adapt my textbook to incorporate the "few" changes in
2003 so that all students using these versions of Office can use the

textbook.

Hope there is a solution out there.

Thanks again
Berenice



===============
"Berenice" wrote:

This is totally screwing up the updating of my textbook for Office

2003......

I need a full page view where I can see my graphics, edit and format
them......

The Reading Layout is too small [doesn't allow you to fill the screen

with
one page] and I don't have access to all the formatting as with Office
2000....

Uggggh!! New is not always better.

Is there a solution????






  #6   Report Post  
Berenice
 
Posts: n/a
Default

Thanks for the reply.

However, the whole idea of the textbook is for students to use Office (Word)
as it is installed on their computer.

If they can't see their graphics and work with them, it's a useless exercise.

Teaching them to change Options is not a problem, but not being able to work
with graphics in Page Layout is.

I'll check out the htm you suggested.

Thanks again,
Berenice


PS: Apparently I misread the previous suggestion to change the - &gt - in
Tools. From the looks of things, the - &gt - in this Discussion software
indicates a quote symbol and is not a command..... So much for tweaking the
software....
============
"Suzanne S. Barnhill" wrote:

There is no reason why you should not be able to see your graphics in Print
Layout view. Check http://word.mvps.org/FAQs/DrwGrphcs/...leGraphics.htm
for some possibilities; also, if you're seeing field codes instead of
graphics, press Alt+F9.

FWIW, I don't consider a Tools | Options setting a "major software tweak";
one of the first things Word users should learn is how to customize Word to
look and work the way they want.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Berenice" wrote in message
...
Thanks for your reply,

But I don't want to turn off the Reading Layout....

My whole textbook is about how to use Microsoft Office (Word, etc.) and I
can't expect my students to screw around with major software tweaks -
especially if even I can't find out where to change - - in Tools as

you
suggest.

I just want to use the Print Layout view as I have been and STILL be able

to
see my graphics, edit them and do all the things that could be done in the
2000 and 98 versions.

All I can get now is a blank place-holder where a graphic is and yet it's
there when using Print Preview.

I need to be able to adapt my textbook to incorporate the "few" changes in
2003 so that all students using these versions of Office can use the

textbook.

Hope there is a solution out there.

Thanks again
Berenice



===============
"Berenice" wrote:

This is totally screwing up the updating of my textbook for Office

2003......

I need a full page view where I can see my graphics, edit and format
them......

The Reading Layout is too small [doesn't allow you to fill the screen

with
one page] and I don't have access to all the formatting as with Office
2000....

Uggggh!! New is not always better.

Is there a solution????





  #7   Report Post  
Suzanne S. Barnhill
 
Posts: n/a
Default

I'm not sure where you're seeing "&gt"; in Outlook Express I do not see any
such except in your posts. The suggestions offered so far a

1. Disable Reading Layout view on the General tab of Tools | Options.

2. Set Print Layout view to display "Whole Page" or "Page Width."

3. Make sure you have "Drawings" checked and "Picture placeholders"
UNchecked on the View tab of Tools | Options.

All of these are very basic settings that your students should learn to use.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Berenice" wrote in message
...
Thanks for the reply.

However, the whole idea of the textbook is for students to use Office

(Word)
as it is installed on their computer.

If they can't see their graphics and work with them, it's a useless

exercise.

Teaching them to change Options is not a problem, but not being able to

work
with graphics in Page Layout is.

I'll check out the htm you suggested.

Thanks again,
Berenice


PS: Apparently I misread the previous suggestion to change the - &gt - in
Tools. From the looks of things, the - &gt - in this Discussion software
indicates a quote symbol and is not a command..... So much for tweaking

the
software....
============
"Suzanne S. Barnhill" wrote:

There is no reason why you should not be able to see your graphics in

Print
Layout view. Check

http://word.mvps.org/FAQs/DrwGrphcs/...leGraphics.htm
for some possibilities; also, if you're seeing field codes instead of
graphics, press Alt+F9.

FWIW, I don't consider a Tools | Options setting a "major software

tweak";
one of the first things Word users should learn is how to customize Word

to
look and work the way they want.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup so
all may benefit.

"Berenice" wrote in message
...
Thanks for your reply,

But I don't want to turn off the Reading Layout....

My whole textbook is about how to use Microsoft Office (Word, etc.)

and I
can't expect my students to screw around with major software tweaks -
especially if even I can't find out where to change - - in Tools as

you
suggest.

I just want to use the Print Layout view as I have been and STILL be

able
to
see my graphics, edit them and do all the things that could be done in

the
2000 and 98 versions.

All I can get now is a blank place-holder where a graphic is and yet

it's
there when using Print Preview.

I need to be able to adapt my textbook to incorporate the "few"

changes in
2003 so that all students using these versions of Office can use the

textbook.

Hope there is a solution out there.

Thanks again
Berenice



===============
"Berenice" wrote:

This is totally screwing up the updating of my textbook for Office

2003......

I need a full page view where I can see my graphics, edit and format
them......

The Reading Layout is too small [doesn't allow you to fill the

screen
with
one page] and I don't have access to all the formatting as with

Office
2000....

Uggggh!! New is not always better.

Is there a solution????






  #8   Report Post  
Beth Melton
 
Posts: n/a
Default

Wouldn't the whole idea of creating a textbook for students on Word be
to prepare them for anything they may encounter?

Obviously your default settings were modified unexpectedly since
normally you *do* see graphics in Page Layout view. If your students
encounter similar difficulties shouldn't they be educated enough to
know how to modify their personal preferences such as those found
under Tools/Options? Those aren't major tweaks, btw. A major tweak
would be manually editing the Registry. (And there are situations
where this is the only way to modify some settings.

One of the first things my students learn is Word can be modified to
suit your preferences. If something appears odd it's likely the issue
lies in their settings and they shouldn't blame the application.

Also I noted you referred to the 98 version of Word. Word versions for
Windows 95 and above a 97, 2000, 2002, 2003. Word 98 was designed
for the Mac.

Please post all follow-up questions to the newsgroup. Requests for
assistance by email can not be acknowledged.

~~~~~~~~~~~~~~~
Beth Melton
Microsoft Office Specialist Master Instructor

"Berenice" wrote in message
...
Thanks for your reply,

But I don't want to turn off the Reading Layout....

My whole textbook is about how to use Microsoft Office (Word, etc.)
and I
can't expect my students to screw around with major software
tweaks -
especially if even I can't find out where to change - &gt - in Tools
as you
suggest.

I just want to use the Print Layout view as I have been and STILL be
able to
see my graphics, edit them and do all the things that could be done
in the
2000 and 98 versions.

All I can get now is a blank place-holder where a graphic is and yet
it's
there when using Print Preview.

I need to be able to adapt my textbook to incorporate the "few"
changes in
2003 so that all students using these versions of Office can use the
textbook.

Hope there is a solution out there.

Thanks again
Berenice



  #9   Report Post  
Berenice
 
Posts: n/a
Default

Obviously, you don't have to deal with 250 high school students screwing
around changing options and defaults all day and still be expected to have
time to teach them as much of the "Office" software as possible in the time
constraints of a semester - on top of all the testing required by the
district, state and federal requirements.

However, for your edifcation - I downloaded Office's update sp1 and now the
Tools-Options choices are working properly....

So much for manufacturer-installed software.

Berenice
======================
"Beth Melton" wrote:

Wouldn't the whole idea of creating a textbook for students on Word be
to prepare them for anything they may encounter?

Obviously your default settings were modified unexpectedly since
normally you *do* see graphics in Page Layout view. If your students
encounter similar difficulties shouldn't they be educated enough to
know how to modify their personal preferences such as those found
under Tools/Options? Those aren't major tweaks, btw. A major tweak
would be manually editing the Registry. (And there are situations
where this is the only way to modify some settings.

One of the first things my students learn is Word can be modified to
suit your preferences. If something appears odd it's likely the issue
lies in their settings and they shouldn't blame the application.

Also I noted you referred to the 98 version of Word. Word versions for
Windows 95 and above a 97, 2000, 2002, 2003. Word 98 was designed
for the Mac.

Please post all follow-up questions to the newsgroup. Requests for
assistance by email can not be acknowledged.

~~~~~~~~~~~~~~~
Beth Melton
Microsoft Office Specialist Master Instructor

"Berenice" wrote in message
...
Thanks for your reply,

But I don't want to turn off the Reading Layout....

My whole textbook is about how to use Microsoft Office (Word, etc.)
and I
can't expect my students to screw around with major software
tweaks -
especially if even I can't find out where to change - - in Tools
as you
suggest.

I just want to use the Print Layout view as I have been and STILL be
able to
see my graphics, edit them and do all the things that could be done
in the
2000 and 98 versions.

All I can get now is a blank place-holder where a graphic is and yet
it's
there when using Print Preview.

I need to be able to adapt my textbook to incorporate the "few"
changes in
2003 so that all students using these versions of Office can use the
textbook.

Hope there is a solution out there.

Thanks again
Berenice




  #10   Report Post  
Berenice
 
Posts: n/a
Default

Thanks again for your help.

Don't know where the problems were, but I decided to download and install
Office's update SP1 and what ever the problems with the Tools-Option choices
were, they are working properly now.

So much for manufacturer-installed software.

Thanks again.
Berenice
=====================
"Suzanne S. Barnhill" wrote:

I'm not sure where you're seeing ""; in Outlook Express I do not see any
such except in your posts. The suggestions offered so far a

1. Disable Reading Layout view on the General tab of Tools | Options.

2. Set Print Layout view to display "Whole Page" or "Page Width."

3. Make sure you have "Drawings" checked and "Picture placeholders"
UNchecked on the View tab of Tools | Options.

All of these are very basic settings that your students should learn to use.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Berenice" wrote in message
...
Thanks for the reply.

However, the whole idea of the textbook is for students to use Office

(Word)
as it is installed on their computer.

If they can't see their graphics and work with them, it's a useless

exercise.

Teaching them to change Options is not a problem, but not being able to

work
with graphics in Page Layout is.

I'll check out the htm you suggested.

Thanks again,
Berenice


PS: Apparently I misread the previous suggestion to change the - - in
Tools. From the looks of things, the - - in this Discussion software
indicates a quote symbol and is not a command..... So much for tweaking

the
software....
============
"Suzanne S. Barnhill" wrote:

There is no reason why you should not be able to see your graphics in

Print
Layout view. Check

http://word.mvps.org/FAQs/DrwGrphcs/...leGraphics.htm
for some possibilities; also, if you're seeing field codes instead of
graphics, press Alt+F9.

FWIW, I don't consider a Tools | Options setting a "major software

tweak";
one of the first things Word users should learn is how to customize Word

to
look and work the way they want.

--


Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup so
all may benefit.

"Berenice" wrote in message
...
Thanks for your reply,

But I don't want to turn off the Reading Layout....

My whole textbook is about how to use Microsoft Office (Word, etc.)

and I
can't expect my students to screw around with major software tweaks -
especially if even I can't find out where to change - - in Tools as
you
suggest.

I just want to use the Print Layout view as I have been and STILL be

able
to
see my graphics, edit them and do all the things that could be done in

the
2000 and 98 versions.

All I can get now is a blank place-holder where a graphic is and yet

it's
there when using Print Preview.

I need to be able to adapt my textbook to incorporate the "few"

changes in
2003 so that all students using these versions of Office can use the
textbook.

Hope there is a solution out there.

Thanks again
Berenice



===============
"Berenice" wrote:

This is totally screwing up the updating of my textbook for Office
2003......

I need a full page view where I can see my graphics, edit and format
them......

The Reading Layout is too small [doesn't allow you to fill the

screen
with
one page] and I don't have access to all the formatting as with

Office
2000....

Uggggh!! New is not always better.

Is there a solution????









  #11   Report Post  
Beth Melton
 
Posts: n/a
Default

I deal, and have dealt, with all types of students and of all ages and
understand the situations you encounter.

To alleviate my frustration I implemented a few procedures to set the
applications back to the defaults. I also made it a point to get a
good grasp on all of the settings/options in the applications so when
something does get changed I can quickly recognize the problem.

If you would like to know more about how to reset the applications to
the defaults when necessary I'd be happy to help.

Something you may want to keep in mind is we've found numerous
situations in which a third party modifies your personal preferences.
Typically an add-in is responsible for the modifications but
occasionally I've found a few Microsoft templates that modify your
preferences as well. If Office came preinstalled then it could have
been caused by the image the manufacturer used to install Office. If
you continue to encounter graphics disappearing in Print Layout view
then you may need to investigate this further.

btw, since you are a teacher, I believe it's "edification" rather than
"edifcation". ;-)

Please post all follow-up questions to the newsgroup. Requests for
assistance by email can not be acknowledged.

~~~~~~~~~~~~~~~
Beth Melton
Microsoft Office MVP

"Berenice" wrote in message
...
Obviously, you don't have to deal with 250 high school students
screwing
around changing options and defaults all day and still be expected
to have
time to teach them as much of the "Office" software as possible in
the time
constraints of a semester - on top of all the testing required by
the
district, state and federal requirements.

However, for your edifcation - I downloaded Office's update sp1 and
now the
Tools-Options choices are working properly....

So much for manufacturer-installed software.

Berenice
======================
"Beth Melton" wrote:

Wouldn't the whole idea of creating a textbook for students on Word
be
to prepare them for anything they may encounter?

Obviously your default settings were modified unexpectedly since
normally you *do* see graphics in Page Layout view. If your
students
encounter similar difficulties shouldn't they be educated enough to
know how to modify their personal preferences such as those found
under Tools/Options? Those aren't major tweaks, btw. A major tweak
would be manually editing the Registry. (And there are situations
where this is the only way to modify some settings.

One of the first things my students learn is Word can be modified
to
suit your preferences. If something appears odd it's likely the
issue
lies in their settings and they shouldn't blame the application.

Also I noted you referred to the 98 version of Word. Word versions
for
Windows 95 and above a 97, 2000, 2002, 2003. Word 98 was
designed
for the Mac.

Please post all follow-up questions to the newsgroup. Requests for
assistance by email can not be acknowledged.

~~~~~~~~~~~~~~~
Beth Melton
Microsoft Office Specialist Master Instructor

"Berenice" wrote in message
...
Thanks for your reply,

But I don't want to turn off the Reading Layout....

My whole textbook is about how to use Microsoft Office (Word,
etc.)
and I
can't expect my students to screw around with major software
tweaks -
especially if even I can't find out where to change - - in
Tools
as you
suggest.

I just want to use the Print Layout view as I have been and STILL
be
able to
see my graphics, edit them and do all the things that could be
done
in the
2000 and 98 versions.

All I can get now is a blank place-holder where a graphic is and
yet
it's
there when using Print Preview.

I need to be able to adapt my textbook to incorporate the "few"
changes in
2003 so that all students using these versions of Office can use
the
textbook.

Hope there is a solution out there.

Thanks again
Berenice






Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How do I fix my Toolbar containing "file", "edit", "view" etc. louisepurple Microsoft Word Help 1 April 28th 05 04:41 AM
View source button is grayed out. DonnaA Mailmerge 1 April 15th 05 10:26 PM
Print Layout View Valerie Microsoft Word Help 1 January 5th 05 12:48 AM
menu bar (file, edit, view, favorites, tools, help) 90hdstc Microsoft Word Help 1 December 9th 04 12:25 AM
Lost commands under Edit, View, Insert, Format,Tools and Tables MorTTime Microsoft Word Help 3 December 1st 04 12:31 AM


All times are GMT +1. The time now is 08:56 PM.

Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Microsoft Office Word Forum - WordBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Word"