Reply
 
Thread Tools Display Modes
  #1   Report Post  
Al
 
Posts: n/a
Default Cell alignment in rows breaking across pages

If I allow a row to break across a page, then the alignment of cells results
in an alignment as if the row were in fact two rows.

I have the following in a table: cells with large paragraphs of text, then
the next column is a "yes" or "no" answer. Restricting the row in breaking
across pages, then my "answer" is correctly aligned vertically in the middle
of the cell; permitting the row to break has the answer aligned in that part
of the cell above the page break.

Any ideas please?
  #2   Report Post  
Cindy M -WordMVP-
 
Posts: n/a
Default

Hi ?B?QWw=?=,

If I allow a row to break across a page, then the alignment of cells results
in an alignment as if the row were in fact two rows.

I have the following in a table: cells with large paragraphs of text, then
the next column is a "yes" or "no" answer. Restricting the row in breaking
across pages, then my "answer" is correctly aligned vertically in the middle
of the cell; permitting the row to break has the answer aligned in that part
of the cell above the page break.

Where would you expect it to be? Word won't break across the middle of the
letters...

Cindy Meister
INTER-Solutions, Switzerland
http://homepage.swissonline.ch/cindymeister (last update Jun 8 2004)
http://www.word.mvps.org

This reply is posted in the Newsgroup; please post any follow question or reply
in the newsgroup and not by e-mail :-)

  #3   Report Post  
Al
 
Posts: n/a
Default

I grant that describing questions is sometimes not so easy to convey the
problem, however please read what I've written more carefully please. If I
select a "centre vertically" alignment in a cell, then I would expect the
text to be centred vertically in the cell. Simple! As it is at the moment it
becomes vertically centred only in that part of the cell that remains above
the break.
(It's only 1 cell after all, so why not have the vertical centre-ing at the
"half-way height?")
Let's put some "numbers" by way of example, and to try to avoid further
confusion. Say my row is 10 cm deep resulting from the content in column "A":
if by breaking the row across the page, if I then get 4 cm above the break
and 6 cm below, then "centre vertically" in a cell in column "B" places the
single word that I have in this cell at the 2cm level above the break,
whereas the centre of the cell is actually half of ten, i.e. 5 cm, and
therefore it should be 1cm below the break!)

"Cindy M -WordMVP-" wrote:

Hi ?B?QWw=?=,

If I allow a row to break across a page, then the alignment of cells results
in an alignment as if the row were in fact two rows.

I have the following in a table: cells with large paragraphs of text, then
the next column is a "yes" or "no" answer. Restricting the row in breaking
across pages, then my "answer" is correctly aligned vertically in the middle
of the cell; permitting the row to break has the answer aligned in that part
of the cell above the page break.

Where would you expect it to be? Word won't break across the middle of the
letters...

Cindy Meister
INTER-Solutions, Switzerland
http://homepage.swissonline.ch/cindymeister (last update Jun 8 2004)
http://www.word.mvps.org

This reply is posted in the Newsgroup; please post any follow question or reply
in the newsgroup and not by e-mail :-)


  #4   Report Post  
Cindy M -WordMVP-
 
Posts: n/a
Default

Hi ?B?QWw=?=,

Word doesn't really know how tall a table cell is; there's no way to get back a
cell or row height using programming code if the cell hasn't been assigned an
exact height. What Word does is lay out things on the fly; right-to-left,
top-to-bottom. And as soon as a table cell breaks to the next page, it has no
way of knowing how tall the cell is, in total. Only the available space on the
current page for that cell. So Word can't do what you envision.

If I
select a "centre vertically" alignment in a cell, then I would expect the
text to be centred vertically in the cell. Simple! As it is at the moment it
becomes vertically centred only in that part of the cell that remains above
the break.
(It's only 1 cell after all, so why not have the vertical centre-ing at the
"half-way height?")
Let's put some "numbers" by way of example, and to try to avoid further
confusion. Say my row is 10 cm deep resulting from the content in column "A":
if by breaking the row across the page, if I then get 4 cm above the break
and 6 cm below, then "centre vertically" in a cell in column "B" places the
single word that I have in this cell at the 2cm level above the break,
whereas the centre of the cell is actually half of ten, i.e. 5 cm, and
therefore it should be 1cm below the break!)


Cindy Meister
INTER-Solutions, Switzerland
http://homepage.swissonline.ch/cindymeister (last update Jun 8 2004)
http://www.word.mvps.org

This reply is posted in the Newsgroup; please post any follow question or reply
in the newsgroup and not by e-mail :-)

  #5   Report Post  
Al
 
Posts: n/a
Default

Thanks for your explanation..now I understand. Shame Word isn't smarter!

"Cindy M -WordMVP-" wrote:

Hi ?B?QWw=?=,

Word doesn't really know how tall a table cell is; there's no way to get back a
cell or row height using programming code if the cell hasn't been assigned an
exact height. What Word does is lay out things on the fly; right-to-left,
top-to-bottom. And as soon as a table cell breaks to the next page, it has no
way of knowing how tall the cell is, in total. Only the available space on the
current page for that cell. So Word can't do what you envision.

If I
select a "centre vertically" alignment in a cell, then I would expect the
text to be centred vertically in the cell. Simple! As it is at the moment it
becomes vertically centred only in that part of the cell that remains above
the break.
(It's only 1 cell after all, so why not have the vertical centre-ing at the
"half-way height?")
Let's put some "numbers" by way of example, and to try to avoid further
confusion. Say my row is 10 cm deep resulting from the content in column "A":
if by breaking the row across the page, if I then get 4 cm above the break
and 6 cm below, then "centre vertically" in a cell in column "B" places the
single word that I have in this cell at the 2cm level above the break,
whereas the centre of the cell is actually half of ten, i.e. 5 cm, and
therefore it should be 1cm below the break!)


Cindy Meister
INTER-Solutions, Switzerland
http://homepage.swissonline.ch/cindymeister (last update Jun 8 2004)
http://www.word.mvps.org

This reply is posted in the Newsgroup; please post any follow question or reply
in the newsgroup and not by e-mail :-)


Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Number of pages excluding content pages Number of pages excluding content pages Microsoft Word Help 4 January 11th 05 03:21 PM
Printing multiple pages in 1 problem Anthony Microsoft Word Help 1 January 10th 05 12:18 PM
How do I rearrange pages within a document? initbennetts Microsoft Word Help 1 December 21st 04 02:15 AM
Shading does not fill entire cell Fred Holmes Tables 1 October 28th 04 10:18 PM


All times are GMT +1. The time now is 11:39 PM.

Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Microsoft Office Word Forum - WordBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Word"