Home |
Search |
Today's Posts |
#1
|
|||
|
|||
word crashing
I had word 2002 and it kept crashing after being open for about 30 seconds.
No matter what other applications i had running or alone. I finally got tired of it, uninstalled complete and reinstalled. It still did not fix the problem. I got my office 2003 out and after unstalling the old installed the new. I am still getting the same crash, but it only seems to appear with word. I have all the latest updates so I know that is not it. Any suggestions? |
#2
|
|||
|
|||
See http://word.mvps.org/FAQs/AppErrors/...peningWord.htm .
Sean wrote: I had word 2002 and it kept crashing after being open for about 30 seconds. No matter what other applications i had running or alone. I finally got tired of it, uninstalled complete and reinstalled. It still did not fix the problem. I got my office 2003 out and after unstalling the old installed the new. I am still getting the same crash, but it only seems to appear with word. I have all the latest updates so I know that is not it. Any suggestions? |
#3
|
|||
|
|||
I deleted the registry key, checked the templates, and messed around with
some of the other stuff. But still get the crash dialog box. "garfield-n-odie" wrote: See http://word.mvps.org/FAQs/AppErrors/...peningWord.htm . Sean wrote: I had word 2002 and it kept crashing after being open for about 30 seconds. No matter what other applications i had running or alone. I finally got tired of it, uninstalled complete and reinstalled. It still did not fix the problem. I got my office 2003 out and after unstalling the old installed the new. I am still getting the same crash, but it only seems to appear with word. I have all the latest updates so I know that is not it. Any suggestions? |
#4
|
|||
|
|||
You say that you "checked the templates". Did you try renaming normal.dot?
Try starting Word in Safe Mode (hold down Ctrl when starting Word, and say Yes to safe mode). Does the crash still occur? If so, then the next thing to try would be Help - Detect and Repair. If the crash doesn't occur, then I'd carefully go back over the http://word.mvps.org/FAQs/AppErrors/...peningWord.htm steps. Note that uninstalling leaves lots of stuff in place, hence the need to see if registry entries or templates are creating the problems. -- Herb Tyson MS MVP Please respond in the newsgroups so everyone can follow along. http://www.herbtyson.com "Sean" wrote in message ... I deleted the registry key, checked the templates, and messed around with some of the other stuff. But still get the crash dialog box. "garfield-n-odie" wrote: See http://word.mvps.org/FAQs/AppErrors/...peningWord.htm . Sean wrote: I had word 2002 and it kept crashing after being open for about 30 seconds. No matter what other applications i had running or alone. I finally got tired of it, uninstalled complete and reinstalled. It still did not fix the problem. I got my office 2003 out and after unstalling the old installed the new. I am still getting the same crash, but it only seems to appear with word. I have all the latest updates so I know that is not it. Any suggestions? |
#5
|
|||
|
|||
The crashes will also have left a lot of dross behind that will make things
worse - see http://www.gmayor.com/what_to_do_when_word_crashes.htm -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Herb Tyson [MVP] wrote: You say that you "checked the templates". Did you try renaming normal.dot? Try starting Word in Safe Mode (hold down Ctrl when starting Word, and say Yes to safe mode). Does the crash still occur? If so, then the next thing to try would be Help - Detect and Repair. If the crash doesn't occur, then I'd carefully go back over the http://word.mvps.org/FAQs/AppErrors/...peningWord.htm steps. Note that uninstalling leaves lots of stuff in place, hence the need to see if registry entries or templates are creating the problems. I deleted the registry key, checked the templates, and messed around with some of the other stuff. But still get the crash dialog box. "garfield-n-odie" wrote: See http://word.mvps.org/FAQs/AppErrors/...peningWord.htm . Sean wrote: I had word 2002 and it kept crashing after being open for about 30 seconds. No matter what other applications i had running or alone. I finally got tired of it, uninstalled complete and reinstalled. It still did not fix the problem. I got my office 2003 out and after unstalling the old installed the new. I am still getting the same crash, but it only seems to appear with word. I have all the latest updates so I know that is not it. Any suggestions? |
#6
|
|||
|
|||
No, I do not recall renaming the .dot file. Is there more specific
instructions on doing so? I started word while holding down CTRL for safe mode, it still crashes. "Herb Tyson [MVP]" wrote: You say that you "checked the templates". Did you try renaming normal.dot? Try starting Word in Safe Mode (hold down Ctrl when starting Word, and say Yes to safe mode). Does the crash still occur? If so, then the next thing to try would be Help - Detect and Repair. If the crash doesn't occur, then I'd carefully go back over the http://word.mvps.org/FAQs/AppErrors/...peningWord.htm steps. Note that uninstalling leaves lots of stuff in place, hence the need to see if registry entries or templates are creating the problems. -- Herb Tyson MS MVP Please respond in the newsgroups so everyone can follow along. http://www.herbtyson.com "Sean" wrote in message ... I deleted the registry key, checked the templates, and messed around with some of the other stuff. But still get the crash dialog box. "garfield-n-odie" wrote: See http://word.mvps.org/FAQs/AppErrors/...peningWord.htm . Sean wrote: I had word 2002 and it kept crashing after being open for about 30 seconds. No matter what other applications i had running or alone. I finally got tired of it, uninstalled complete and reinstalled. It still did not fix the problem. I got my office 2003 out and after unstalling the old installed the new. I am still getting the same crash, but it only seems to appear with word. I have all the latest updates so I know that is not it. Any suggestions? |
#7
|
|||
|
|||
When you held down the Ctrl key, did you get the prompt for starting in Safe
Mode? It's not in safe mode unless you get the prompt and click Yes. You need to keep the Ctrl key held down until Word appears on then Windows task bar. If you did do that and it still crashes, then it's probably an installation issue. Have you run Help - Detect and Repair from Word's menu? -- Herb Tyson MS MVP Please respond in the newsgroups so everyone can follow along. "Sean" wrote in message ... No, I do not recall renaming the .dot file. Is there more specific instructions on doing so? I started word while holding down CTRL for safe mode, it still crashes. "Herb Tyson [MVP]" wrote: You say that you "checked the templates". Did you try renaming normal.dot? Try starting Word in Safe Mode (hold down Ctrl when starting Word, and say Yes to safe mode). Does the crash still occur? If so, then the next thing to try would be Help - Detect and Repair. If the crash doesn't occur, then I'd carefully go back over the http://word.mvps.org/FAQs/AppErrors/...peningWord.htm steps. Note that uninstalling leaves lots of stuff in place, hence the need to see if registry entries or templates are creating the problems. -- Herb Tyson MS MVP Please respond in the newsgroups so everyone can follow along. http://www.herbtyson.com "Sean" wrote in message ... I deleted the registry key, checked the templates, and messed around with some of the other stuff. But still get the crash dialog box. "garfield-n-odie" wrote: See http://word.mvps.org/FAQs/AppErrors/...peningWord.htm . Sean wrote: I had word 2002 and it kept crashing after being open for about 30 seconds. No matter what other applications i had running or alone. I finally got tired of it, uninstalled complete and reinstalled. It still did not fix the problem. I got my office 2003 out and after unstalling the old installed the new. I am still getting the same crash, but it only seems to appear with word. I have all the latest updates so I know that is not it. Any suggestions? |
#8
|
|||
|
|||
Yes it started in safe mode just fine. I have also ran the detect and repair.
I think it is just more than an installation issue. It did this with both 2002 and 2003, is has to be something on my machine that deals with word (maybe its not just word? but everything else works fine). Although I did just open outlook and the word error came up and I sent in an error report. Has done that twice now. Though why would word try to open when I bring up outlook. "Herb Tyson [MVP]" wrote: When you held down the Ctrl key, did you get the prompt for starting in Safe Mode? It's not in safe mode unless you get the prompt and click Yes. You need to keep the Ctrl key held down until Word appears on then Windows task bar. If you did do that and it still crashes, then it's probably an installation issue. Have you run Help - Detect and Repair from Word's menu? -- Herb Tyson MS MVP Please respond in the newsgroups so everyone can follow along. "Sean" wrote in message ... No, I do not recall renaming the .dot file. Is there more specific instructions on doing so? I started word while holding down CTRL for safe mode, it still crashes. "Herb Tyson [MVP]" wrote: You say that you "checked the templates". Did you try renaming normal.dot? Try starting Word in Safe Mode (hold down Ctrl when starting Word, and say Yes to safe mode). Does the crash still occur? If so, then the next thing to try would be Help - Detect and Repair. If the crash doesn't occur, then I'd carefully go back over the http://word.mvps.org/FAQs/AppErrors/...peningWord.htm steps. Note that uninstalling leaves lots of stuff in place, hence the need to see if registry entries or templates are creating the problems. -- Herb Tyson MS MVP Please respond in the newsgroups so everyone can follow along. http://www.herbtyson.com "Sean" wrote in message ... I deleted the registry key, checked the templates, and messed around with some of the other stuff. But still get the crash dialog box. "garfield-n-odie" wrote: See http://word.mvps.org/FAQs/AppErrors/...peningWord.htm . Sean wrote: I had word 2002 and it kept crashing after being open for about 30 seconds. No matter what other applications i had running or alone. I finally got tired of it, uninstalled complete and reinstalled. It still did not fix the problem. I got my office 2003 out and after unstalling the old installed the new. I am still getting the same crash, but it only seems to appear with word. I have all the latest updates so I know that is not it. Any suggestions? |
#9
|
|||
|
|||
If it started OK in safe mode then it is a problem with associated files -
see http://www.gmayor.com/what_to_do_when_word_crashes.htm followed by http://word.mvps.org/FAQs/AppErrors/...peningWord.htm and work through the troubleshooting tips. My guess is an add-in for an older version of Word is still present. As for Word starting with Outlook, set Outlook not to use Word as e-mail editor. Outlook's own editor is fine and causes fewer problems. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Sean wrote: Yes it started in safe mode just fine. I have also ran the detect and repair. I think it is just more than an installation issue. It did this with both 2002 and 2003, is has to be something on my machine that deals with word (maybe its not just word? but everything else works fine). Although I did just open outlook and the word error came up and I sent in an error report. Has done that twice now. Though why would word try to open when I bring up outlook. "Herb Tyson [MVP]" wrote: When you held down the Ctrl key, did you get the prompt for starting in Safe Mode? It's not in safe mode unless you get the prompt and click Yes. You need to keep the Ctrl key held down until Word appears on then Windows task bar. If you did do that and it still crashes, then it's probably an installation issue. Have you run Help - Detect and Repair from Word's menu? -- Herb Tyson MS MVP Please respond in the newsgroups so everyone can follow along. "Sean" wrote in message ... No, I do not recall renaming the .dot file. Is there more specific instructions on doing so? I started word while holding down CTRL for safe mode, it still crashes. "Herb Tyson [MVP]" wrote: You say that you "checked the templates". Did you try renaming normal.dot? Try starting Word in Safe Mode (hold down Ctrl when starting Word, and say Yes to safe mode). Does the crash still occur? If so, then the next thing to try would be Help - Detect and Repair. If the crash doesn't occur, then I'd carefully go back over the http://word.mvps.org/FAQs/AppErrors/...peningWord.htm steps. Note that uninstalling leaves lots of stuff in place, hence the need to see if registry entries or templates are creating the problems. -- Herb Tyson MS MVP Please respond in the newsgroups so everyone can follow along. http://www.herbtyson.com "Sean" wrote in message ... I deleted the registry key, checked the templates, and messed around with some of the other stuff. But still get the crash dialog box. "garfield-n-odie" wrote: See http://word.mvps.org/FAQs/AppErrors/...peningWord.htm . Sean wrote: I had word 2002 and it kept crashing after being open for about 30 seconds. No matter what other applications i had running or alone. I finally got tired of it, uninstalled complete and reinstalled. It still did not fix the problem. I got my office 2003 out and after unstalling the old installed the new. I am still getting the same crash, but it only seems to appear with word. I have all the latest updates so I know that is not it. Any suggestions? |
#10
|
|||
|
|||
Not sure if any of this information will help, its from the error dialog box.
AppName: winword.exe AppVer: 11.0.6568.0 AppStamp:42e178a5 ModName: hpzpm309.dll ModVer: 2.236.2.0 ModStamp:3f24dad6 fDebug: 0 Offset: 000354b3 "Sean" wrote: No, I do not recall renaming the .dot file. Is there more specific instructions on doing so? I started word while holding down CTRL for safe mode, it still crashes. "Herb Tyson [MVP]" wrote: You say that you "checked the templates". Did you try renaming normal.dot? Try starting Word in Safe Mode (hold down Ctrl when starting Word, and say Yes to safe mode). Does the crash still occur? If so, then the next thing to try would be Help - Detect and Repair. If the crash doesn't occur, then I'd carefully go back over the http://word.mvps.org/FAQs/AppErrors/...peningWord.htm steps. Note that uninstalling leaves lots of stuff in place, hence the need to see if registry entries or templates are creating the problems. -- Herb Tyson MS MVP Please respond in the newsgroups so everyone can follow along. http://www.herbtyson.com "Sean" wrote in message ... I deleted the registry key, checked the templates, and messed around with some of the other stuff. But still get the crash dialog box. "garfield-n-odie" wrote: See http://word.mvps.org/FAQs/AppErrors/...peningWord.htm . Sean wrote: I had word 2002 and it kept crashing after being open for about 30 seconds. No matter what other applications i had running or alone. I finally got tired of it, uninstalled complete and reinstalled. It still did not fix the problem. I got my office 2003 out and after unstalling the old installed the new. I am still getting the same crash, but it only seems to appear with word. I have all the latest updates so I know that is not it. Any suggestions? |
#11
|
|||
|
|||
The ModName suggests a problem with your Hewlett Packard printer
driver. Try deleting and reinstalling your printer in Start | Control Panel | Printers and Faxes. Sean wrote: Not sure if any of this information will help, its from the error dialog box. AppName: winword.exe AppVer: 11.0.6568.0 AppStamp:42e178a5 ModName: hpzpm309.dll ModVer: 2.236.2.0 ModStamp:3f24dad6 fDebug: 0 Offset: 000354b3 "Sean" wrote: No, I do not recall renaming the .dot file. Is there more specific instructions on doing so? I started word while holding down CTRL for safe mode, it still crashes. "Herb Tyson [MVP]" wrote: You say that you "checked the templates". Did you try renaming normal.dot? Try starting Word in Safe Mode (hold down Ctrl when starting Word, and say Yes to safe mode). Does the crash still occur? If so, then the next thing to try would be Help - Detect and Repair. If the crash doesn't occur, then I'd carefully go back over the http://word.mvps.org/FAQs/AppErrors/...peningWord.htm steps. Note that uninstalling leaves lots of stuff in place, hence the need to see if registry entries or templates are creating the problems. -- Herb Tyson MS MVP Please respond in the newsgroups so everyone can follow along. http://www.herbtyson.com "Sean" wrote in message ... I deleted the registry key, checked the templates, and messed around with some of the other stuff. But still get the crash dialog box. "garfield-n-odie" wrote: See http://word.mvps.org/FAQs/AppErrors/...peningWord.htm . Sean wrote: I had word 2002 and it kept crashing after being open for about 30 seconds. No matter what other applications i had running or alone. I finally got tired of it, uninstalled complete and reinstalled. It still did not fix the problem. I got my office 2003 out and after unstalling the old installed the new. I am still getting the same crash, but it only seems to appear with word. I have all the latest updates so I know that is not it. Any suggestions? |
#12
|
|||
|
|||
There is no printer installed on this computer at all. Though there is an HP
printer on another machine on the same network. Do I still need to remove the printer and readd it on the network? "garfield-n-odie" wrote: The ModName suggests a problem with your Hewlett Packard printer driver. Try deleting and reinstalling your printer in Start | Control Panel | Printers and Faxes. Sean wrote: Not sure if any of this information will help, its from the error dialog box. AppName: winword.exe AppVer: 11.0.6568.0 AppStamp:42e178a5 ModName: hpzpm309.dll ModVer: 2.236.2.0 ModStamp:3f24dad6 fDebug: 0 Offset: 000354b3 "Sean" wrote: No, I do not recall renaming the .dot file. Is there more specific instructions on doing so? I started word while holding down CTRL for safe mode, it still crashes. "Herb Tyson [MVP]" wrote: You say that you "checked the templates". Did you try renaming normal.dot? Try starting Word in Safe Mode (hold down Ctrl when starting Word, and say Yes to safe mode). Does the crash still occur? If so, then the next thing to try would be Help - Detect and Repair. If the crash doesn't occur, then I'd carefully go back over the http://word.mvps.org/FAQs/AppErrors/...peningWord.htm steps. Note that uninstalling leaves lots of stuff in place, hence the need to see if registry entries or templates are creating the problems. -- Herb Tyson MS MVP Please respond in the newsgroups so everyone can follow along. http://www.herbtyson.com "Sean" wrote in message ... I deleted the registry key, checked the templates, and messed around with some of the other stuff. But still get the crash dialog box. "garfield-n-odie" wrote: See http://word.mvps.org/FAQs/AppErrors/...peningWord.htm . Sean wrote: I had word 2002 and it kept crashing after being open for about 30 seconds. No matter what other applications i had running or alone. I finally got tired of it, uninstalled complete and reinstalled. It still did not fix the problem. I got my office 2003 out and after unstalling the old installed the new. I am still getting the same crash, but it only seems to appear with word. I have all the latest updates so I know that is not it. Any suggestions? |
#13
|
|||
|
|||
There might not be a printer physically connected to your
computer, but you apparently have selected an HP printer as your default printer in Start | Control Panel | Printers and Faxes. Read item 2(c) in the article I originally suggested that you read. Sean wrote: There is no printer installed on this computer at all. Though there is an HP printer on another machine on the same network. Do I still need to remove the printer and readd it on the network? "garfield-n-odie" wrote: The ModName suggests a problem with your Hewlett Packard printer driver. Try deleting and reinstalling your printer in Start | Control Panel | Printers and Faxes. Sean wrote: Not sure if any of this information will help, its from the error dialog box. AppName: winword.exe AppVer: 11.0.6568.0 AppStamp:42e178a5 ModName: hpzpm309.dll ModVer: 2.236.2.0 ModStamp:3f24dad6 fDebug: 0 Offset: 000354b3 "Sean" wrote: No, I do not recall renaming the .dot file. Is there more specific instructions on doing so? I started word while holding down CTRL for safe mode, it still crashes. "Herb Tyson [MVP]" wrote: You say that you "checked the templates". Did you try renaming normal.dot? Try starting Word in Safe Mode (hold down Ctrl when starting Word, and say Yes to safe mode). Does the crash still occur? If so, then the next thing to try would be Help - Detect and Repair. If the crash doesn't occur, then I'd carefully go back over the http://word.mvps.org/FAQs/AppErrors/...peningWord.htm steps. Note that uninstalling leaves lots of stuff in place, hence the need to see if registry entries or templates are creating the problems. -- Herb Tyson MS MVP Please respond in the newsgroups so everyone can follow along. http://www.herbtyson.com "Sean" wrote in message ... I deleted the registry key, checked the templates, and messed around with some of the other stuff. But still get the crash dialog box. "garfield-n-odie" wrote: See http://word.mvps.org/FAQs/AppErrors/...peningWord.htm . Sean wrote: I had word 2002 and it kept crashing after being open for about 30 seconds. No matter what other applications i had running or alone. I finally got tired of it, uninstalled complete and reinstalled. It still did not fix the problem. I got my office 2003 out and after unstalling the old installed the new. I am still getting the same crash, but it only seems to appear with word. I have all the latest updates so I know that is not it. Any suggestions? |
#14
|
|||
|
|||
word crashing
Hey there, I've found your discussion via google entering practically the same error code : AppName: winword.exe AppVer: 11.0.6568.0 AppStamp:42e178a5 ModName: mssp3nl.dll ModVer: 3.0.7.6 ModStamp:4163fe51 fDebug: 0 Offset: 0000121b I'm searching for a few days now what this error triggers and how to avoid it, without any succes for now. History : as a professor in ICT (cisco stuff etc.) I'm continuously writing courses for my students. In those courses are several figures with all kinds of natures : jpg, pdf, visio, ... Previously, with older versions of WORD and VISIO, i've printed the figures in pdf, and imported them in word. Just to avoid trouble. As I can expect that these problems would be solved in newer versions with the latest updates, for once I've tried cutting and pasting them directly. As the course grow (now about 21Mb), 70 pages, 100 figures, it became more and more unstabel. I've tried finishing my work on computers in the lab with clean SW, all the patches you can find, deleting normal.dots, deleting registry keys, saving as an RTF,... NOTHING helps. Is there anybody who has suggestions ? -- GuidoFBPosted from - http://www.officehelp.in |
#15
|
|||
|
|||
word crashing
See http://support.microsoft.com/?kbid=838022 "Description of the
Office 2003 Dutch Spelling Checker Update: May 25, 2004". GuidoFB wrote: Hey there, I've found your discussion via google entering practically the same error code : AppName: winword.exe AppVer: 11.0.6568.0 AppStamp:42e178a5 ModName: mssp3nl.dll ModVer: 3.0.7.6 ModStamp:4163fe51 fDebug: 0 Offset: 0000121b I'm searching for a few days now what this error triggers and how to avoid it, without any succes for now. History : as a professor in ICT (cisco stuff etc.) I'm continuously writing courses for my students. In those courses are several figures with all kinds of natures : jpg, pdf, visio, ... Previously, with older versions of WORD and VISIO, i've printed the figures in pdf, and imported them in word. Just to avoid trouble. As I can expect that these problems would be solved in newer versions with the latest updates, for once I've tried cutting and pasting them directly. As the course grow (now about 21Mb), 70 pages, 100 figures, it became more and more unstabel. I've tried finishing my work on computers in the lab with clean SW, all the patches you can find, deleting normal.dots, deleting registry keys, saving as an RTF,... NOTHING helps. Is there anybody who has suggestions ? |
#16
|
|||
|
|||
word crashing
I have the same problem after installing visio 2003. Only the office version
is 2000? Word 2000 crashes when i do a spell check or when i edit a existing document. Regards Piet "garfield-n-odie" wrote: See http://support.microsoft.com/?kbid=838022 "Description of the Office 2003 Dutch Spelling Checker Update: May 25, 2004". GuidoFB wrote: Hey there, I've found your discussion via google entering practically the same error code : AppName: winword.exe AppVer: 11.0.6568.0 AppStamp:42e178a5 ModName: mssp3nl.dll ModVer: 3.0.7.6 ModStamp:4163fe51 fDebug: 0 Offset: 0000121b I'm searching for a few days now what this error triggers and how to avoid it, without any succes for now. History : as a professor in ICT (cisco stuff etc.) I'm continuously writing courses for my students. In those courses are several figures with all kinds of natures : jpg, pdf, visio, ... Previously, with older versions of WORD and VISIO, i've printed the figures in pdf, and imported them in word. Just to avoid trouble. As I can expect that these problems would be solved in newer versions with the latest updates, for once I've tried cutting and pasting them directly. As the course grow (now about 21Mb), 70 pages, 100 figures, it became more and more unstabel. I've tried finishing my work on computers in the lab with clean SW, all the patches you can find, deleting normal.dots, deleting registry keys, saving as an RTF,... NOTHING helps. Is there anybody who has suggestions ? |
#17
|
|||
|
|||
word crashing
I have the same problem after installing visio 2003. Only the office version
is 2000? Word 2000 crashes when i do a spell check or when i edit a existing document. Regards Piet "garfield-n-odie" wrote: See http://support.microsoft.com/?kbid=838022 "Description of the Office 2003 Dutch Spelling Checker Update: May 25, 2004". GuidoFB wrote: Hey there, I've found your discussion via google entering practically the same error code : AppName: winword.exe AppVer: 11.0.6568.0 AppStamp:42e178a5 ModName: mssp3nl.dll ModVer: 3.0.7.6 ModStamp:4163fe51 fDebug: 0 Offset: 0000121b I'm searching for a few days now what this error triggers and how to avoid it, without any succes for now. History : as a professor in ICT (cisco stuff etc.) I'm continuously writing courses for my students. In those courses are several figures with all kinds of natures : jpg, pdf, visio, ... Previously, with older versions of WORD and VISIO, i've printed the figures in pdf, and imported them in word. Just to avoid trouble. As I can expect that these problems would be solved in newer versions with the latest updates, for once I've tried cutting and pasting them directly. As the course grow (now about 21Mb), 70 pages, 100 figures, it became more and more unstabel. I've tried finishing my work on computers in the lab with clean SW, all the patches you can find, deleting normal.dots, deleting registry keys, saving as an RTF,... NOTHING helps. Is there anybody who has suggestions ? |
#18
|
|||
|
|||
word crashing
I have the same problem after installing visio 2003. Only the office version
is 2000? Word 2000 crashes when i do a spell check or when i edit a existing document. Regards Piet "garfield-n-odie" wrote: See http://support.microsoft.com/?kbid=838022 "Description of the Office 2003 Dutch Spelling Checker Update: May 25, 2004". GuidoFB wrote: Hey there, I've found your discussion via google entering practically the same error code : AppName: winword.exe AppVer: 11.0.6568.0 AppStamp:42e178a5 ModName: mssp3nl.dll ModVer: 3.0.7.6 ModStamp:4163fe51 fDebug: 0 Offset: 0000121b I'm searching for a few days now what this error triggers and how to avoid it, without any succes for now. History : as a professor in ICT (cisco stuff etc.) I'm continuously writing courses for my students. In those courses are several figures with all kinds of natures : jpg, pdf, visio, ... Previously, with older versions of WORD and VISIO, i've printed the figures in pdf, and imported them in word. Just to avoid trouble. As I can expect that these problems would be solved in newer versions with the latest updates, for once I've tried cutting and pasting them directly. As the course grow (now about 21Mb), 70 pages, 100 figures, it became more and more unstabel. I've tried finishing my work on computers in the lab with clean SW, all the patches you can find, deleting normal.dots, deleting registry keys, saving as an RTF,... NOTHING helps. Is there anybody who has suggestions ? |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
apply a template to existing documents | Page Layout | |||
Does Word have Keyboard Merges like Word Perfect does? | Mailmerge | |||
Word2000 letterhead merge | Mailmerge | |||
Underscore (_) will not always display in RTF files (Word 2002). | Microsoft Word Help | |||
letters - ask/fillin | New Users |