Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to microsoft.public.word.pagelayout
Michael www.williamsmusic.net
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

How do I format a CD booklet in Microsoft Word? The only paper formats I see
are U.S. letter and legal and A4.
  #2   Report Post  
Posted to microsoft.public.word.pagelayout
Graham Mayor
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

A CD booklet is essentially a two fixed size cell table with a border as a
cutout guide and can be printed on any paper size that will fit it.
Word is a poor tool for this job. Publisher is better, but Surething CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only paper
formats I see are U.S. letter and legal and A4.




  #3   Report Post  
Posted to microsoft.public.word.pagelayout
Michael www.williamsmusic.net
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

Thanks for you answer, but I'm sorry. I don't understand it. I'm a
techno-dummy. I only know enough to get by. Can you tell me where to get a CD
booklet templet or something" It'll be about 10 or 12 pages. I have it saved
as a Word document. You can also e-mail me directly at:


Thanks,



Michael
www.cdbaby.com/mbw

"Graham Mayor" wrote:

A CD booklet is essentially a two fixed size cell table with a border as a
cutout guide and can be printed on any paper size that will fit it.
Word is a poor tool for this job. Publisher is better, but Surething CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only paper
formats I see are U.S. letter and legal and A4.





  #4   Report Post  
Posted to microsoft.public.word.pagelayout
Suzanne S. Barnhill
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

If you have Word 2002 or above, use the "Book fold" feature. If an earlier
version, see http://word.mvps.org/FAQs/Formatting...etPrinting.htm. Very
likely you will have to set your booklet up with larger margins on a larger
paper size, then trim accordingly.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in message
...
Thanks for you answer, but I'm sorry. I don't understand it. I'm a
techno-dummy. I only know enough to get by. Can you tell me where to get a

CD
booklet templet or something" It'll be about 10 or 12 pages. I have it

saved
as a Word document. You can also e-mail me directly at:


Thanks,



Michael
www.cdbaby.com/mbw

"Graham Mayor" wrote:

A CD booklet is essentially a two fixed size cell table with a border as

a
cutout guide and can be printed on any paper size that will fit it.
Word is a poor tool for this job. Publisher is better, but Surething CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only paper
formats I see are U.S. letter and legal and A4.






  #5   Report Post  
Posted to microsoft.public.word.pagelayout
Michael www.williamsmusic.net
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

Hi, Suzanne! Thanks for your response. I am in Europe, and everything is
metric. I just want to create a simple music CD booklet which will contain
the lyrics to some of my songs. If I can get as far as you've directed me
(hopefuully) please tell me in .mm what measurements I should use to create
a music CD booklet. I also have Publisher, if you think that would be better.

Thanks,


Michael

www.cdbaby.com/mbw

"Suzanne S. Barnhill" wrote:

If you have Word 2002 or above, use the "Book fold" feature. If an earlier
version, see http://word.mvps.org/FAQs/Formatting...etPrinting.htm. Very
likely you will have to set your booklet up with larger margins on a larger
paper size, then trim accordingly.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in message
...
Thanks for you answer, but I'm sorry. I don't understand it. I'm a
techno-dummy. I only know enough to get by. Can you tell me where to get a

CD
booklet templet or something" It'll be about 10 or 12 pages. I have it

saved
as a Word document. You can also e-mail me directly at:


Thanks,



Michael
www.cdbaby.com/mbw

"Graham Mayor" wrote:

A CD booklet is essentially a two fixed size cell table with a border as

a
cutout guide and can be printed on any paper size that will fit it.
Word is a poor tool for this job. Publisher is better, but Surething CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only paper
formats I see are U.S. letter and legal and A4.








  #6   Report Post  
Posted to microsoft.public.word.pagelayout
Doug Robbins - Word MVP
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

Use a ruler and measure the case into which you want to insert the booklet.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Michael www.williamsmusic.net"
. com wrote in message
...
Hi, Suzanne! Thanks for your response. I am in Europe, and everything is
metric. I just want to create a simple music CD booklet which will contain
the lyrics to some of my songs. If I can get as far as you've directed me
(hopefuully) please tell me in .mm what measurements I should use to
create
a music CD booklet. I also have Publisher, if you think that would be
better.

Thanks,


Michael

www.cdbaby.com/mbw

"Suzanne S. Barnhill" wrote:

If you have Word 2002 or above, use the "Book fold" feature. If an
earlier
version, see http://word.mvps.org/FAQs/Formatting...etPrinting.htm.
Very
likely you will have to set your booklet up with larger margins on a
larger
paper size, then trim accordingly.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup
so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in message
...
Thanks for you answer, but I'm sorry. I don't understand it. I'm a
techno-dummy. I only know enough to get by. Can you tell me where to
get a

CD
booklet templet or something" It'll be about 10 or 12 pages. I have it

saved
as a Word document. You can also e-mail me directly at:


Thanks,



Michael
www.cdbaby.com/mbw

"Graham Mayor" wrote:

A CD booklet is essentially a two fixed size cell table with a border
as

a
cutout guide and can be printed on any paper size that will fit it.
Word is a poor tool for this job. Publisher is better, but Surething
CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only paper
formats I see are U.S. letter and legal and A4.








  #7   Report Post  
Posted to microsoft.public.word.pagelayout
Suzanne S. Barnhill
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

Publisher would be easier. As Doug says, use a ruler.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Doug Robbins - Word MVP" wrote in message
...
Use a ruler and measure the case into which you want to insert the

booklet.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Michael www.williamsmusic.net"
. com wrote in message
...
Hi, Suzanne! Thanks for your response. I am in Europe, and everything is
metric. I just want to create a simple music CD booklet which will

contain
the lyrics to some of my songs. If I can get as far as you've directed

me
(hopefuully) please tell me in .mm what measurements I should use to
create
a music CD booklet. I also have Publisher, if you think that would be
better.

Thanks,


Michael

www.cdbaby.com/mbw

"Suzanne S. Barnhill" wrote:

If you have Word 2002 or above, use the "Book fold" feature. If an
earlier
version, see http://word.mvps.org/FAQs/Formatting...etPrinting.htm.
Very
likely you will have to set your booklet up with larger margins on a
larger
paper size, then trim accordingly.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup
so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in message
...
Thanks for you answer, but I'm sorry. I don't understand it. I'm a
techno-dummy. I only know enough to get by. Can you tell me where to
get a
CD
booklet templet or something" It'll be about 10 or 12 pages. I have

it
saved
as a Word document. You can also e-mail me directly at:


Thanks,



Michael
www.cdbaby.com/mbw

"Graham Mayor" wrote:

A CD booklet is essentially a two fixed size cell table with a

border
as
a
cutout guide and can be printed on any paper size that will fit it.
Word is a poor tool for this job. Publisher is better, but

Surething
CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only paper
formats I see are U.S. letter and legal and A4.









  #8   Report Post  
Posted to microsoft.public.word.pagelayout
Michael www.williamsmusic.net
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

Your response sounds like a joke, and that is how I take it. I also do not
wish to "avail" msyelf of your "services". If I wish to pay a consultant for
such a simple question, I guarantee you, you'll be the last person on earth I
will consider. I'd rather buy another program than to pay such a rude person
anything at all.

MBW

"Doug Robbins - Word MVP" wrote:

Use a ruler and measure the case into which you want to insert the booklet.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Michael www.williamsmusic.net"
. com wrote in message
...
Hi, Suzanne! Thanks for your response. I am in Europe, and everything is
metric. I just want to create a simple music CD booklet which will contain
the lyrics to some of my songs. If I can get as far as you've directed me
(hopefuully) please tell me in .mm what measurements I should use to
create
a music CD booklet. I also have Publisher, if you think that would be
better.

Thanks,


Michael

www.cdbaby.com/mbw

"Suzanne S. Barnhill" wrote:

If you have Word 2002 or above, use the "Book fold" feature. If an
earlier
version, see http://word.mvps.org/FAQs/Formatting...etPrinting.htm.
Very
likely you will have to set your booklet up with larger margins on a
larger
paper size, then trim accordingly.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup
so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in message
...
Thanks for you answer, but I'm sorry. I don't understand it. I'm a
techno-dummy. I only know enough to get by. Can you tell me where to
get a
CD
booklet templet or something" It'll be about 10 or 12 pages. I have it
saved
as a Word document. You can also e-mail me directly at:


Thanks,



Michael
www.cdbaby.com/mbw

"Graham Mayor" wrote:

A CD booklet is essentially a two fixed size cell table with a border
as
a
cutout guide and can be printed on any paper size that will fit it.
Word is a poor tool for this job. Publisher is better, but Surething
CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only paper
formats I see are U.S. letter and legal and A4.









  #9   Report Post  
Posted to microsoft.public.word.pagelayout
Michael www.williamsmusic.net
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

I thought that Doug was quite rude, and I don't understand using a "ruler",
so I guess I'm simply not going to get an answer that a non-expert
understands here. Too bad Microsoft can't make more logical software.

MBW

"Suzanne S. Barnhill" wrote:

Publisher would be easier. As Doug says, use a ruler.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Doug Robbins - Word MVP" wrote in message
...
Use a ruler and measure the case into which you want to insert the

booklet.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Michael www.williamsmusic.net"
. com wrote in message
...
Hi, Suzanne! Thanks for your response. I am in Europe, and everything is
metric. I just want to create a simple music CD booklet which will

contain
the lyrics to some of my songs. If I can get as far as you've directed

me
(hopefuully) please tell me in .mm what measurements I should use to
create
a music CD booklet. I also have Publisher, if you think that would be
better.

Thanks,


Michael

www.cdbaby.com/mbw

"Suzanne S. Barnhill" wrote:

If you have Word 2002 or above, use the "Book fold" feature. If an
earlier
version, see http://word.mvps.org/FAQs/Formatting...etPrinting.htm.
Very
likely you will have to set your booklet up with larger margins on a
larger
paper size, then trim accordingly.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup
so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in message
...
Thanks for you answer, but I'm sorry. I don't understand it. I'm a
techno-dummy. I only know enough to get by. Can you tell me where to
get a
CD
booklet templet or something" It'll be about 10 or 12 pages. I have

it
saved
as a Word document. You can also e-mail me directly at:


Thanks,



Michael
www.cdbaby.com/mbw

"Graham Mayor" wrote:

A CD booklet is essentially a two fixed size cell table with a

border
as
a
cutout guide and can be printed on any paper size that will fit it.
Word is a poor tool for this job. Publisher is better, but

Surething
CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only paper
formats I see are U.S. letter and legal and A4.










  #10   Report Post  
Posted to microsoft.public.word.pagelayout
jaartee
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

Michael,

You are out of line. Just because you don't understand doesn't make
everyone else stupid and rude.

A 'ruler' is a linear measuring device, and he is simply telling you to
measure the case. So measure the case!
--
jaartee
Fellow user


"Michael www.williamsmusic.net" wrote:

Your response sounds like a joke, and that is how I take it. I also do not
wish to "avail" msyelf of your "services". If I wish to pay a consultant for
such a simple question, I guarantee you, you'll be the last person on earth I
will consider. I'd rather buy another program than to pay such a rude person
anything at all.

MBW

"Doug Robbins - Word MVP" wrote:

Use a ruler and measure the case into which you want to insert the booklet.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Michael www.williamsmusic.net"
. com wrote in message
...
Hi, Suzanne! Thanks for your response. I am in Europe, and everything is
metric. I just want to create a simple music CD booklet which will contain
the lyrics to some of my songs. If I can get as far as you've directed me
(hopefuully) please tell me in .mm what measurements I should use to
create
a music CD booklet. I also have Publisher, if you think that would be
better.

Thanks,


Michael

www.cdbaby.com/mbw

"Suzanne S. Barnhill" wrote:

If you have Word 2002 or above, use the "Book fold" feature. If an
earlier
version, see http://word.mvps.org/FAQs/Formatting...etPrinting.htm.
Very
likely you will have to set your booklet up with larger margins on a
larger
paper size, then trim accordingly.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup
so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in message
...
Thanks for you answer, but I'm sorry. I don't understand it. I'm a
techno-dummy. I only know enough to get by. Can you tell me where to
get a
CD
booklet templet or something" It'll be about 10 or 12 pages. I have it
saved
as a Word document. You can also e-mail me directly at:


Thanks,



Michael
www.cdbaby.com/mbw

"Graham Mayor" wrote:

A CD booklet is essentially a two fixed size cell table with a border
as
a
cutout guide and can be printed on any paper size that will fit it.
Word is a poor tool for this job. Publisher is better, but Surething
CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only paper
formats I see are U.S. letter and legal and A4.











  #11   Report Post  
Posted to microsoft.public.word.pagelayout
Suzanne S. Barnhill
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

Perhaps you call it a "rule"? It's just a piece of wood, metal, or plastic
marked in inches or centimeters. You use it to find the dimensions of the CD
case insert. You then set up your publication in Publisher to be that size.
Publisher does booklets nicely and will print crop marks for you on your
oversized paper.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in message
...
I thought that Doug was quite rude, and I don't understand using a

"ruler",
so I guess I'm simply not going to get an answer that a non-expert
understands here. Too bad Microsoft can't make more logical software.

MBW

"Suzanne S. Barnhill" wrote:

Publisher would be easier. As Doug says, use a ruler.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup so
all may benefit.

"Doug Robbins - Word MVP" wrote in message
...
Use a ruler and measure the case into which you want to insert the

booklet.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Michael www.williamsmusic.net"
. com wrote in

message
...
Hi, Suzanne! Thanks for your response. I am in Europe, and

everything is
metric. I just want to create a simple music CD booklet which will

contain
the lyrics to some of my songs. If I can get as far as you've

directed
me
(hopefuully) please tell me in .mm what measurements I should use

to
create
a music CD booklet. I also have Publisher, if you think that would

be
better.

Thanks,


Michael

www.cdbaby.com/mbw

"Suzanne S. Barnhill" wrote:

If you have Word 2002 or above, use the "Book fold" feature. If an
earlier
version, see

http://word.mvps.org/FAQs/Formatting...etPrinting.htm.
Very
likely you will have to set your booklet up with larger margins on

a
larger
paper size, then trim accordingly.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup
so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in

message
...
Thanks for you answer, but I'm sorry. I don't understand it. I'm

a
techno-dummy. I only know enough to get by. Can you tell me where

to
get a
CD
booklet templet or something" It'll be about 10 or 12 pages. I

have
it
saved
as a Word document. You can also e-mail me directly at:


Thanks,



Michael
www.cdbaby.com/mbw

"Graham Mayor" wrote:

A CD booklet is essentially a two fixed size cell table with a

border
as
a
cutout guide and can be printed on any paper size that will fit

it.
Word is a poor tool for this job. Publisher is better, but

Surething
CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could

use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only

paper
formats I see are U.S. letter and legal and A4.











  #12   Report Post  
Posted to microsoft.public.word.pagelayout
Michael www.williamsmusic.net
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

When someone writes about my "availing" myself of his "services" for a simple
question asked at a newsgroup, and not of this person at all, yes, he is
rude, and this is really none of your business. Get it"

MBW

"jaartee" wrote:

Michael,

You are out of line. Just because you don't understand doesn't make
everyone else stupid and rude.

A 'ruler' is a linear measuring device, and he is simply telling you to
measure the case. So measure the case!
--
jaartee
Fellow user


"Michael www.williamsmusic.net" wrote:

Your response sounds like a joke, and that is how I take it. I also do not
wish to "avail" msyelf of your "services". If I wish to pay a consultant for
such a simple question, I guarantee you, you'll be the last person on earth I
will consider. I'd rather buy another program than to pay such a rude person
anything at all.

MBW

"Doug Robbins - Word MVP" wrote:

Use a ruler and measure the case into which you want to insert the booklet.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Michael www.williamsmusic.net"
. com wrote in message
...
Hi, Suzanne! Thanks for your response. I am in Europe, and everything is
metric. I just want to create a simple music CD booklet which will contain
the lyrics to some of my songs. If I can get as far as you've directed me
(hopefuully) please tell me in .mm what measurements I should use to
create
a music CD booklet. I also have Publisher, if you think that would be
better.

Thanks,


Michael

www.cdbaby.com/mbw

"Suzanne S. Barnhill" wrote:

If you have Word 2002 or above, use the "Book fold" feature. If an
earlier
version, see http://word.mvps.org/FAQs/Formatting...etPrinting.htm.
Very
likely you will have to set your booklet up with larger margins on a
larger
paper size, then trim accordingly.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup
so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in message
...
Thanks for you answer, but I'm sorry. I don't understand it. I'm a
techno-dummy. I only know enough to get by. Can you tell me where to
get a
CD
booklet templet or something" It'll be about 10 or 12 pages. I have it
saved
as a Word document. You can also e-mail me directly at:


Thanks,



Michael
www.cdbaby.com/mbw

"Graham Mayor" wrote:

A CD booklet is essentially a two fixed size cell table with a border
as
a
cutout guide and can be printed on any paper size that will fit it.
Word is a poor tool for this job. Publisher is better, but Surething
CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only paper
formats I see are U.S. letter and legal and A4.









  #13   Report Post  
Posted to microsoft.public.word.pagelayout
Graham Mayor
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

Frankly I can't understand why when you have such a huge chip on your
shoulder that you think anyone might want to help you. If you write in a
public newsgroup it is *everyone's* business. You are quoting from Doug's
standard signature block, which appears on all his messages to deter people
from contacting him directly unless they wish to pay for his time - which he
gives freely to those who ask questions here. His reply may have been brief,
but it was neither rude nor inaccurate.

As I said in my first reply Word is not a good tool to do this. Word does
not work well with custom paper sizes, so you are going to have to use a
standard paper size and use a ruler to measure the CD booklet and transfer
those measurements to the document to produce a document the size of a CD
booklet page - then you can use the method Suzanne linked to produce a
multi-page booklet. Word does not care what measurement system you use. You
can insert inches of cm (or others) directly in any measurement box as long
as you indicate what they are eg 5 cm 3" etc.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



Michael www.williamsmusic.net wrote:
When someone writes about my "availing" myself of his "services" for
a simple question asked at a newsgroup, and not of this person at
all, yes, he is rude, and this is really none of your business. Get
it"

MBW

"jaartee" wrote:

Michael,

You are out of line. Just because you don't understand doesn't make
everyone else stupid and rude.

A 'ruler' is a linear measuring device, and he is simply telling you
to measure the case. So measure the case!
--
jaartee
Fellow user


"Michael www.williamsmusic.net" wrote:

Your response sounds like a joke, and that is how I take it. I also
do not wish to "avail" msyelf of your "services". If I wish to pay
a consultant for such a simple question, I guarantee you, you'll be
the last person on earth I will consider. I'd rather buy another
program than to pay such a rude person anything at all.

MBW

"Doug Robbins - Word MVP" wrote:

Use a ruler and measure the case into which you want to insert the
booklet.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of
my services on a paid consulting basis.

Doug Robbins - Word MVP

"Michael www.williamsmusic.net"
. com wrote in
message ...
Hi, Suzanne! Thanks for your response. I am in Europe, and
everything is metric. I just want to create a simple music CD
booklet which will contain the lyrics to some of my songs. If I
can get as far as you've directed me (hopefuully) please tell me
in .mm what measurements I should use to create
a music CD booklet. I also have Publisher, if you think that
would be better.

Thanks,


Michael

www.cdbaby.com/mbw

"Suzanne S. Barnhill" wrote:

If you have Word 2002 or above, use the "Book fold" feature. If
an earlier
version, see
http://word.mvps.org/FAQs/Formatting...etPrinting.htm. Very
likely you will have to set your booklet up with larger margins
on a larger
paper size, then trim accordingly.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in
message
...
Thanks for you answer, but I'm sorry. I don't understand it.
I'm a techno-dummy. I only know enough to get by. Can you tell
me where to get a
CD
booklet templet or something" It'll be about 10 or 12 pages. I
have it saved as a Word document. You can also e-mail me
directly at:

Thanks,



Michael
www.cdbaby.com/mbw

"Graham Mayor" wrote:

A CD booklet is essentially a two fixed size cell table with a
border as
a
cutout guide and can be printed on any paper size that will
fit it. Word is a poor tool for this job. Publisher is better,
but Surething CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could
use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only paper
formats I see are U.S. letter and legal and A4.



  #14   Report Post  
Posted to microsoft.public.word.pagelayout
Michael www.williamsmusic.net
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

I'm sorry if I seem to have a "huge chip" on my shoulder. I guess I'm just
sick and tired of people for whom the Almighty Dollar is their obsession; in
some cases, even their god. I know that we (unfortunately) live in a world
where "men" seem to think they "own" land that God gave us all to live on,
and that we must pay tribute (i.e., money) to these people to rent "their"
land and "their" house and pay for everything with the possible exception of
air. I reluctantly accept this fact, but I do need money like Bill Gates. No
one does. So I guess I'm just so tired of seeing people putting money above
love that it just sickens me. You don't know what I've been through, so I can
somewhat understand your reaction. I didn't mean to insult anyone. I worked
for 35 years and in 2001 I had my substantial life's savings plundered by the
Swiss-German government for the pleasure of one of their wealthiest citizens.
I worked as a musical composer for him for 3 years, and then he refused to
pay me, falsely claiming that I hadn't recorded anything at all. You can hear
sound samples of many of the 375 songs I created for this liar at:

www.cdbaby.com/mbw

Again, I'm sorry if I hurt anyone's feelings. If I did, it was not
intentional. I am impoverished and I am just trying to figure out how to put
a CD booklet together so I can try to make copies of my "Ghostwriter" CD and
hopefully sell enough copies to at least eat.

Michael Boren Williams
Skype: ghostwriter1951
www.williamsmusic.net



"Graham Mayor" wrote:

Frankly I can't understand why when you have such a huge chip on your
shoulder that you think anyone might want to help you. If you write in a
public newsgroup it is *everyone's* business. You are quoting from Doug's
standard signature block, which appears on all his messages to deter people
from contacting him directly unless they wish to pay for his time - which he
gives freely to those who ask questions here. His reply may have been brief,
but it was neither rude nor inaccurate.

As I said in my first reply Word is not a good tool to do this. Word does
not work well with custom paper sizes, so you are going to have to use a
standard paper size and use a ruler to measure the CD booklet and transfer
those measurements to the document to produce a document the size of a CD
booklet page - then you can use the method Suzanne linked to produce a
multi-page booklet. Word does not care what measurement system you use. You
can insert inches of cm (or others) directly in any measurement box as long
as you indicate what they are eg 5 cm 3" etc.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



Michael www.williamsmusic.net wrote:
When someone writes about my "availing" myself of his "services" for
a simple question asked at a newsgroup, and not of this person at
all, yes, he is rude, and this is really none of your business. Get
it"

MBW

"jaartee" wrote:

Michael,

You are out of line. Just because you don't understand doesn't make
everyone else stupid and rude.

A 'ruler' is a linear measuring device, and he is simply telling you
to measure the case. So measure the case!
--
jaartee
Fellow user


"Michael www.williamsmusic.net" wrote:

Your response sounds like a joke, and that is how I take it. I also
do not wish to "avail" msyelf of your "services". If I wish to pay
a consultant for such a simple question, I guarantee you, you'll be
the last person on earth I will consider. I'd rather buy another
program than to pay such a rude person anything at all.

MBW

"Doug Robbins - Word MVP" wrote:

Use a ruler and measure the case into which you want to insert the
booklet.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of
my services on a paid consulting basis.

Doug Robbins - Word MVP

"Michael www.williamsmusic.net"
. com wrote in
message ...
Hi, Suzanne! Thanks for your response. I am in Europe, and
everything is metric. I just want to create a simple music CD
booklet which will contain the lyrics to some of my songs. If I
can get as far as you've directed me (hopefuully) please tell me
in .mm what measurements I should use to create
a music CD booklet. I also have Publisher, if you think that
would be better.

Thanks,


Michael

www.cdbaby.com/mbw

"Suzanne S. Barnhill" wrote:

If you have Word 2002 or above, use the "Book fold" feature. If
an earlier
version, see
http://word.mvps.org/FAQs/Formatting...etPrinting.htm. Very
likely you will have to set your booklet up with larger margins
on a larger
paper size, then trim accordingly.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in
message
...
Thanks for you answer, but I'm sorry. I don't understand it.
I'm a techno-dummy. I only know enough to get by. Can you tell
me where to get a
CD
booklet templet or something" It'll be about 10 or 12 pages. I
have it saved as a Word document. You can also e-mail me
directly at:

Thanks,



Michael
www.cdbaby.com/mbw

"Graham Mayor" wrote:

A CD booklet is essentially a two fixed size cell table with a
border as
a
cutout guide and can be printed on any paper size that will
fit it. Word is a poor tool for this job. Publisher is better,
but Surething CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could
use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only paper
formats I see are U.S. letter and legal and A4.




  #15   Report Post  
Posted to microsoft.public.word.pagelayout
Graham Mayor
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

You simply misconstrued Doug's signature block.

People like Doug, Suzanne, myself (and a number of others - some of whom are
MVPs others not) give of our time freely in these public newsgroups to help
Word users. We do not work for Microsoft and do not take payment for our
assistance. What we do object to is people posting unsolicited questions to
our private e-mail addresses (which we do not hide despite the problems it
causes with spam) and that is the prime consideration behind Doug's sig.

I am sorry to hear you were ripped off. It happens. I once worked freelance
for a magazine which went bust owing me several thousand pounds - then
started up again under a new company the following month. I never saw any of
that money.

The fact remains that it is going to be fiddly to produce a CD booklet in
Word. See if you can beg steal or borrow a copy of Microsoft Publisher which
makes producing booklets much simpler and will lead you by the hand along
the way. Try eBay (though beware there are sharks there too).


--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
I'm sorry if I seem to have a "huge chip" on my shoulder. I guess I'm
just sick and tired of people for whom the Almighty Dollar is their
obsession; in some cases, even their god. I know that we
(unfortunately) live in a world where "men" seem to think they "own"
land that God gave us all to live on, and that we must pay tribute
(i.e., money) to these people to rent "their" land and "their" house
and pay for everything with the possible exception of air. I
reluctantly accept this fact, but I do need money like Bill Gates. No
one does. So I guess I'm just so tired of seeing people putting money
above love that it just sickens me. You don't know what I've been
through, so I can somewhat understand your reaction. I didn't mean to
insult anyone. I worked for 35 years and in 2001 I had my substantial
life's savings plundered by the Swiss-German government for the
pleasure of one of their wealthiest citizens. I worked as a musical
composer for him for 3 years, and then he refused to pay me, falsely
claiming that I hadn't recorded anything at all. You can hear sound
samples of many of the 375 songs I created for this liar at:

www.cdbaby.com/mbw

Again, I'm sorry if I hurt anyone's feelings. If I did, it was not
intentional. I am impoverished and I am just trying to figure out how
to put a CD booklet together so I can try to make copies of my
"Ghostwriter" CD and hopefully sell enough copies to at least eat.

Michael Boren Williams
Skype: ghostwriter1951
www.williamsmusic.net



"Graham Mayor" wrote:

Frankly I can't understand why when you have such a huge chip on your
shoulder that you think anyone might want to help you. If you write
in a public newsgroup it is *everyone's* business. You are quoting
from Doug's standard signature block, which appears on all his
messages to deter people from contacting him directly unless they
wish to pay for his time - which he gives freely to those who ask
questions here. His reply may have been brief, but it was neither
rude nor inaccurate.

As I said in my first reply Word is not a good tool to do this. Word
does not work well with custom paper sizes, so you are going to have
to use a standard paper size and use a ruler to measure the CD
booklet and transfer those measurements to the document to produce a
document the size of a CD booklet page - then you can use the method
Suzanne linked to produce a multi-page booklet. Word does not care
what measurement system you use. You can insert inches of cm (or
others) directly in any measurement box as long as you indicate what
they are eg 5 cm 3" etc.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



Michael www.williamsmusic.net wrote:
When someone writes about my "availing" myself of his "services" for
a simple question asked at a newsgroup, and not of this person at
all, yes, he is rude, and this is really none of your business. Get
it"

MBW

"jaartee" wrote:

Michael,

You are out of line. Just because you don't understand doesn't
make everyone else stupid and rude.

A 'ruler' is a linear measuring device, and he is simply telling
you to measure the case. So measure the case!
--
jaartee
Fellow user


"Michael www.williamsmusic.net" wrote:

Your response sounds like a joke, and that is how I take it. I
also do not wish to "avail" msyelf of your "services". If I wish
to pay a consultant for such a simple question, I guarantee you,
you'll be the last person on earth I will consider. I'd rather
buy another program than to pay such a rude person anything at
all.

MBW

"Doug Robbins - Word MVP" wrote:

Use a ruler and measure the case into which you want to insert
the booklet.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself
of my services on a paid consulting basis.

Doug Robbins - Word MVP

"Michael www.williamsmusic.net"
. com wrote in
message
...
Hi, Suzanne! Thanks for your response. I am in Europe, and
everything is metric. I just want to create a simple music CD
booklet which will contain the lyrics to some of my songs. If I
can get as far as you've directed me (hopefuully) please tell me
in .mm what measurements I should use to create
a music CD booklet. I also have Publisher, if you think that
would be better.

Thanks,


Michael

www.cdbaby.com/mbw

"Suzanne S. Barnhill" wrote:

If you have Word 2002 or above, use the "Book fold" feature. If
an earlier
version, see
http://word.mvps.org/FAQs/Formatting...etPrinting.htm. Very
likely you will have to set your booklet up with larger margins
on a larger
paper size, then trim accordingly.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in
message
...
Thanks for you answer, but I'm sorry. I don't understand it.
I'm a techno-dummy. I only know enough to get by. Can you tell
me where to get a
CD
booklet templet or something" It'll be about 10 or 12 pages. I
have it saved as a Word document. You can also e-mail me
directly at:

Thanks,



Michael
www.cdbaby.com/mbw

"Graham Mayor" wrote:

A CD booklet is essentially a two fixed size cell table with
a border as
a
cutout guide and can be printed on any paper size that will
fit it. Word is a poor tool for this job. Publisher is
better, but Surething CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could
use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only
paper formats I see are U.S. letter and legal and A4.





  #16   Report Post  
Posted to microsoft.public.word.pagelayout
Greg Maxey
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

While your story is unfortunate, it is a poor excuse for acting like an ass.

I am not even remotely aware of Doug Robbin's financial circumstances, but
the possibility does exists that he is only hoping that enough people will
avail themselves of his services so, as you say, he can eat too. Did you
consider that?

I hope, for your sake, that your former patron's pockets are not so deep
that he keeps a team of hungry lawyers around to pounce on folks for
defamation of character. At least you didn't mention him by name ;-)

Good luck on you CD sales project.
--
Greg Maxey/Word MVP
See:
http://gregmaxey.mvps.org/word_tips.htm
For some helpful tips using Word.

P.S., Please don't click the link in my standard newsgroup signature. It
contains links that you will find offensive


"Michael www.williamsmusic.net"
. com wrote in message
...
I'm sorry if I seem to have a "huge chip" on my shoulder. I guess I'm just
sick and tired of people for whom the Almighty Dollar is their obsession;
in
some cases, even their god. I know that we (unfortunately) live in a world
where "men" seem to think they "own" land that God gave us all to live on,
and that we must pay tribute (i.e., money) to these people to rent "their"
land and "their" house and pay for everything with the possible exception
of
air. I reluctantly accept this fact, but I do need money like Bill Gates.
No
one does. So I guess I'm just so tired of seeing people putting money
above
love that it just sickens me. You don't know what I've been through, so I
can
somewhat understand your reaction. I didn't mean to insult anyone. I
worked
for 35 years and in 2001 I had my substantial life's savings plundered by
the
Swiss-German government for the pleasure of one of their wealthiest
citizens.
I worked as a musical composer for him for 3 years, and then he refused to
pay me, falsely claiming that I hadn't recorded anything at all. You can
hear
sound samples of many of the 375 songs I created for this liar at:

www.cdbaby.com/mbw

Again, I'm sorry if I hurt anyone's feelings. If I did, it was not
intentional. I am impoverished and I am just trying to figure out how to
put
a CD booklet together so I can try to make copies of my "Ghostwriter" CD
and
hopefully sell enough copies to at least eat.

Michael Boren Williams
Skype: ghostwriter1951
www.williamsmusic.net



"Graham Mayor" wrote:

Frankly I can't understand why when you have such a huge chip on your
shoulder that you think anyone might want to help you. If you write in a
public newsgroup it is *everyone's* business. You are quoting from Doug's
standard signature block, which appears on all his messages to deter
people
from contacting him directly unless they wish to pay for his time - which
he
gives freely to those who ask questions here. His reply may have been
brief,
but it was neither rude nor inaccurate.

As I said in my first reply Word is not a good tool to do this. Word does
not work well with custom paper sizes, so you are going to have to use a
standard paper size and use a ruler to measure the CD booklet and
transfer
those measurements to the document to produce a document the size of a CD
booklet page - then you can use the method Suzanne linked to produce a
multi-page booklet. Word does not care what measurement system you use.
You
can insert inches of cm (or others) directly in any measurement box as
long
as you indicate what they are eg 5 cm 3" etc.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



Michael www.williamsmusic.net wrote:
When someone writes about my "availing" myself of his "services" for
a simple question asked at a newsgroup, and not of this person at
all, yes, he is rude, and this is really none of your business. Get
it"

MBW

"jaartee" wrote:

Michael,

You are out of line. Just because you don't understand doesn't make
everyone else stupid and rude.

A 'ruler' is a linear measuring device, and he is simply telling you
to measure the case. So measure the case!
--
jaartee
Fellow user


"Michael www.williamsmusic.net" wrote:

Your response sounds like a joke, and that is how I take it. I also
do not wish to "avail" msyelf of your "services". If I wish to pay
a consultant for such a simple question, I guarantee you, you'll be
the last person on earth I will consider. I'd rather buy another
program than to pay such a rude person anything at all.

MBW

"Doug Robbins - Word MVP" wrote:

Use a ruler and measure the case into which you want to insert the
booklet.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of
my services on a paid consulting basis.

Doug Robbins - Word MVP

"Michael www.williamsmusic.net"
. com wrote in
message ...
Hi, Suzanne! Thanks for your response. I am in Europe, and
everything is metric. I just want to create a simple music CD
booklet which will contain the lyrics to some of my songs. If I
can get as far as you've directed me (hopefuully) please tell me
in .mm what measurements I should use to create
a music CD booklet. I also have Publisher, if you think that
would be better.

Thanks,


Michael

www.cdbaby.com/mbw

"Suzanne S. Barnhill" wrote:

If you have Word 2002 or above, use the "Book fold" feature. If
an earlier
version, see
http://word.mvps.org/FAQs/Formatting...etPrinting.htm. Very
likely you will have to set your booklet up with larger margins
on a larger
paper size, then trim accordingly.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in
message
...
Thanks for you answer, but I'm sorry. I don't understand it.
I'm a techno-dummy. I only know enough to get by. Can you tell
me where to get a
CD
booklet templet or something" It'll be about 10 or 12 pages. I
have it saved as a Word document. You can also e-mail me
directly at:

Thanks,



Michael
www.cdbaby.com/mbw

"Graham Mayor" wrote:

A CD booklet is essentially a two fixed size cell table with a
border as
a
cutout guide and can be printed on any paper size that will
fit it. Word is a poor tool for this job. Publisher is better,
but Surething CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could
use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only paper
formats I see are U.S. letter and legal and A4.






  #17   Report Post  
Posted to microsoft.public.word.pagelayout
Michael www.williamsmusic.net
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

My former patron does, indeed "keep a team of lawyers around', in in this,
the most totalitarian of all countries, there is no freedom of speech. He did
indeed sue me. I went to trial and was quicklly acquitted, even as a hated
American. I suppose you're disappointed to hear that Freedom of Speech won.

Michael Boren Williams
die-hard Jeffersonian Democrat

"Greg Maxey" wrote:

Community Message Not Available

  #18   Report Post  
Posted to microsoft.public.word.pagelayout
Greg Maxey
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

Michael,

You assume too much.

Good day and again good luck with your project.

--
Greg Maxey/Word MVP
See:
http://gregmaxey.mvps.org/word_tips.htm
For some helpful tips using Word.


Michael www.williamsmusic.net wrote:
My former patron does, indeed "keep a team of lawyers around', in in
this, the most totalitarian of all countries, there is no freedom of
speech. He did indeed sue me. I went to trial and was quicklly
acquitted, even as a hated American. I suppose you're disappointed to
hear that Freedom of Speech won.

Michael Boren Williams
die-hard Jeffersonian Democrat

"Greg Maxey" wrote:

Community Message Not Available



  #19   Report Post  
Posted to microsoft.public.word.pagelayout
Michael www.williamsmusic.net
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

We all act like asses at one time or another, especially in these End Times.
Don't you agree? I hope that we all can eat. I was in my native L.A. in 2003
for a year. I hadn't been back in 13 years. I was astounded to see the
richest country in the world overflowing with homeless, starving people!
Americans eating out of garbage cans! Well, my friends, as Jefferson said, "A
country gets the government they deserve".




"Greg Maxey" wrote:

While your story is unfortunate, it is a poor excuse for acting like an ass.

I am not even remotely aware of Doug Robbin's financial circumstances, but
the possibility does exists that he is only hoping that enough people will
avail themselves of his services so, as you say, he can eat too. Did you
consider that?

I hope, for your sake, that your former patron's pockets are not so deep
that he keeps a team of hungry lawyers around to pounce on folks for
defamation of character. At least you didn't mention him by name ;-)

Good luck on you CD sales project.
--
Greg Maxey/Word MVP
See:
http://gregmaxey.mvps.org/word_tips.htm
For some helpful tips using Word.

P.S., Please don't click the link in my standard newsgroup signature. It
contains links that you will find offensive


"Michael www.williamsmusic.net"
. com wrote in message
...
I'm sorry if I seem to have a "huge chip" on my shoulder. I guess I'm just
sick and tired of people for whom the Almighty Dollar is their obsession;
in
some cases, even their god. I know that we (unfortunately) live in a world
where "men" seem to think they "own" land that God gave us all to live on,
and that we must pay tribute (i.e., money) to these people to rent "their"
land and "their" house and pay for everything with the possible exception
of
air. I reluctantly accept this fact, but I do need money like Bill Gates.
No
one does. So I guess I'm just so tired of seeing people putting money
above
love that it just sickens me. You don't know what I've been through, so I
can
somewhat understand your reaction. I didn't mean to insult anyone. I
worked
for 35 years and in 2001 I had my substantial life's savings plundered by
the
Swiss-German government for the pleasure of one of their wealthiest
citizens.
I worked as a musical composer for him for 3 years, and then he refused to
pay me, falsely claiming that I hadn't recorded anything at all. You can
hear
sound samples of many of the 375 songs I created for this liar at:

www.cdbaby.com/mbw

Again, I'm sorry if I hurt anyone's feelings. If I did, it was not
intentional. I am impoverished and I am just trying to figure out how to
put
a CD booklet together so I can try to make copies of my "Ghostwriter" CD
and
hopefully sell enough copies to at least eat.

Michael Boren Williams
Skype: ghostwriter1951
www.williamsmusic.net



"Graham Mayor" wrote:

Frankly I can't understand why when you have such a huge chip on your
shoulder that you think anyone might want to help you. If you write in a
public newsgroup it is *everyone's* business. You are quoting from Doug's
standard signature block, which appears on all his messages to deter
people
from contacting him directly unless they wish to pay for his time - which
he
gives freely to those who ask questions here. His reply may have been
brief,
but it was neither rude nor inaccurate.

As I said in my first reply Word is not a good tool to do this. Word does
not work well with custom paper sizes, so you are going to have to use a
standard paper size and use a ruler to measure the CD booklet and
transfer
those measurements to the document to produce a document the size of a CD
booklet page - then you can use the method Suzanne linked to produce a
multi-page booklet. Word does not care what measurement system you use.
You
can insert inches of cm (or others) directly in any measurement box as
long
as you indicate what they are eg 5 cm 3" etc.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



Michael www.williamsmusic.net wrote:
When someone writes about my "availing" myself of his "services" for
a simple question asked at a newsgroup, and not of this person at
all, yes, he is rude, and this is really none of your business. Get
it"

MBW

"jaartee" wrote:

Michael,

You are out of line. Just because you don't understand doesn't make
everyone else stupid and rude.

A 'ruler' is a linear measuring device, and he is simply telling you
to measure the case. So measure the case!
--
jaartee
Fellow user


"Michael www.williamsmusic.net" wrote:

Your response sounds like a joke, and that is how I take it. I also
do not wish to "avail" msyelf of your "services". If I wish to pay
a consultant for such a simple question, I guarantee you, you'll be
the last person on earth I will consider. I'd rather buy another
program than to pay such a rude person anything at all.

MBW

"Doug Robbins - Word MVP" wrote:

Use a ruler and measure the case into which you want to insert the
booklet.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of
my services on a paid consulting basis.

Doug Robbins - Word MVP

"Michael www.williamsmusic.net"
. com wrote in
message ...
Hi, Suzanne! Thanks for your response. I am in Europe, and
everything is metric. I just want to create a simple music CD
booklet which will contain the lyrics to some of my songs. If I
can get as far as you've directed me (hopefuully) please tell me
in .mm what measurements I should use to create
a music CD booklet. I also have Publisher, if you think that
would be better.

Thanks,


Michael

www.cdbaby.com/mbw

"Suzanne S. Barnhill" wrote:

If you have Word 2002 or above, use the "Book fold" feature. If
an earlier
version, see
http://word.mvps.org/FAQs/Formatting...etPrinting.htm. Very
likely you will have to set your booklet up with larger margins
on a larger
paper size, then trim accordingly.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in
message
...
Thanks for you answer, but I'm sorry. I don't understand it.
I'm a techno-dummy. I only know enough to get by. Can you tell
me where to get a
CD
booklet templet or something" It'll be about 10 or 12 pages. I
have it saved as a Word document. You can also e-mail me
directly at:

Thanks,



Michael
www.cdbaby.com/mbw

"Graham Mayor" wrote:

A CD booklet is essentially a two fixed size cell table with a
border as
a
cutout guide and can be printed on any paper size that will
fit it. Word is a poor tool for this job. Publisher is better,
but Surething CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could
use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only paper
formats I see are U.S. letter and legal and A4.






  #20   Report Post  
Posted to microsoft.public.word.pagelayout
Suzanne S. Barnhill
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

As others have said, you took personally Doug's standard signature block,
which appears on every post. I have had posters similarly fail to understand
the warning in my sig ("Email cannot be acknowledged; please post all
follow-ups to the newsgroup so all may benefit."). Anyone who posts
consistently in these NGs is very familiar with the phenomenon of getting
email that begins, "I saw that you have posted a lot of answers in the
newsgroups, so I am hoping you can help me with my problem." If I send any
answer at all, it is likely to be, "When I see your question in the
newsgroups, I will be happy to answer it."

Obviously, the signature block becomes more prominent (and hence subject to
misunderstanding) when a reply is short, and many of mine are because, when
possible, I refer users to an online article that will provide a more
thorough answer.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in message
...
When someone writes about my "availing" myself of his "services" for a

simple
question asked at a newsgroup, and not of this person at all, yes, he is
rude, and this is really none of your business. Get it"

MBW

"jaartee" wrote:

Michael,

You are out of line. Just because you don't understand doesn't make
everyone else stupid and rude.

A 'ruler' is a linear measuring device, and he is simply telling you to
measure the case. So measure the case!
--
jaartee
Fellow user


"Michael www.williamsmusic.net" wrote:

Your response sounds like a joke, and that is how I take it. I also do

not
wish to "avail" msyelf of your "services". If I wish to pay a

consultant for
such a simple question, I guarantee you, you'll be the last person on

earth I
will consider. I'd rather buy another program than to pay such a rude

person
anything at all.

MBW

"Doug Robbins - Word MVP" wrote:

Use a ruler and measure the case into which you want to insert the

booklet.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of

my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Michael www.williamsmusic.net"
. com wrote in

message
...
Hi, Suzanne! Thanks for your response. I am in Europe, and

everything is
metric. I just want to create a simple music CD booklet which will

contain
the lyrics to some of my songs. If I can get as far as you've

directed me
(hopefuully) please tell me in .mm what measurements I should use

to
create
a music CD booklet. I also have Publisher, if you think that

would be
better.

Thanks,


Michael

www.cdbaby.com/mbw

"Suzanne S. Barnhill" wrote:

If you have Word 2002 or above, use the "Book fold" feature. If

an
earlier
version, see

http://word.mvps.org/FAQs/Formatting...etPrinting.htm.
Very
likely you will have to set your booklet up with larger margins

on a
larger
paper size, then trim accordingly.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup
so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in

message
...
Thanks for you answer, but I'm sorry. I don't understand it.

I'm a
techno-dummy. I only know enough to get by. Can you tell me

where to
get a
CD
booklet templet or something" It'll be about 10 or 12 pages. I

have it
saved
as a Word document. You can also e-mail me directly at:


Thanks,



Michael
www.cdbaby.com/mbw

"Graham Mayor" wrote:

A CD booklet is essentially a two fixed size cell table with

a border
as
a
cutout guide and can be printed on any paper size that will

fit it.
Word is a poor tool for this job. Publisher is better, but

Surething
CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could

use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only

paper
formats I see are U.S. letter and legal and A4.












  #21   Report Post  
Posted to microsoft.public.word.pagelayout
Michael www.williamsmusic.net
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

OK, Suzanne, thanks. GEEZ! I sure got myself in trouble for THAT statement,
didn't I? WOW! I've beengetting attacked by every Microsoft freak in the
world, I think! Gosh! I guess I'm really sensitive after all the lust for
money I've been around here in Switzerland, where the national pastime is
ripping of foreigner's life's savings. Sorry about that, Suzanne. Now go
listen to my music and see what a nice guy I am at:

www.cdbaby.com/mbw

See?


Michael

"Suzanne S. Barnhill" wrote:

As others have said, you took personally Doug's standard signature block,
which appears on every post. I have had posters similarly fail to understand
the warning in my sig ("Email cannot be acknowledged; please post all
follow-ups to the newsgroup so all may benefit."). Anyone who posts
consistently in these NGs is very familiar with the phenomenon of getting
email that begins, "I saw that you have posted a lot of answers in the
newsgroups, so I am hoping you can help me with my problem." If I send any
answer at all, it is likely to be, "When I see your question in the
newsgroups, I will be happy to answer it."

Obviously, the signature block becomes more prominent (and hence subject to
misunderstanding) when a reply is short, and many of mine are because, when
possible, I refer users to an online article that will provide a more
thorough answer.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in message
...
When someone writes about my "availing" myself of his "services" for a

simple
question asked at a newsgroup, and not of this person at all, yes, he is
rude, and this is really none of your business. Get it"

MBW

"jaartee" wrote:

Michael,

You are out of line. Just because you don't understand doesn't make
everyone else stupid and rude.

A 'ruler' is a linear measuring device, and he is simply telling you to
measure the case. So measure the case!
--
jaartee
Fellow user


"Michael www.williamsmusic.net" wrote:

Your response sounds like a joke, and that is how I take it. I also do

not
wish to "avail" msyelf of your "services". If I wish to pay a

consultant for
such a simple question, I guarantee you, you'll be the last person on

earth I
will consider. I'd rather buy another program than to pay such a rude

person
anything at all.

MBW

"Doug Robbins - Word MVP" wrote:

Use a ruler and measure the case into which you want to insert the

booklet.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of

my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Michael www.williamsmusic.net"
. com wrote in

message
...
Hi, Suzanne! Thanks for your response. I am in Europe, and

everything is
metric. I just want to create a simple music CD booklet which will

contain
the lyrics to some of my songs. If I can get as far as you've

directed me
(hopefuully) please tell me in .mm what measurements I should use

to
create
a music CD booklet. I also have Publisher, if you think that

would be
better.

Thanks,


Michael

www.cdbaby.com/mbw

"Suzanne S. Barnhill" wrote:

If you have Word 2002 or above, use the "Book fold" feature. If

an
earlier
version, see

http://word.mvps.org/FAQs/Formatting...etPrinting.htm.
Very
likely you will have to set your booklet up with larger margins

on a
larger
paper size, then trim accordingly.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup
so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in

message
...
Thanks for you answer, but I'm sorry. I don't understand it.

I'm a
techno-dummy. I only know enough to get by. Can you tell me

where to
get a
CD
booklet templet or something" It'll be about 10 or 12 pages. I

have it
saved
as a Word document. You can also e-mail me directly at:


Thanks,



Michael
www.cdbaby.com/mbw

"Graham Mayor" wrote:

A CD booklet is essentially a two fixed size cell table with

a border
as
a
cutout guide and can be printed on any paper size that will

fit it.
Word is a poor tool for this job. Publisher is better, but

Surething
CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could

use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only

paper
formats I see are U.S. letter and legal and A4.











  #22   Report Post  
Posted to microsoft.public.word.pagelayout
Michael www.williamsmusic.net
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

P.S. AFter five years of trying to find an American lawyer with the guts to
help me fight the evil Swiss, I now have a lawyer from Alabama. Smile,
Suzanne!

Michael
waw.williamsmusic.net

"Suzanne S. Barnhill" wrote:

As others have said, you took personally Doug's standard signature block,
which appears on every post. I have had posters similarly fail to understand
the warning in my sig ("Email cannot be acknowledged; please post all
follow-ups to the newsgroup so all may benefit."). Anyone who posts
consistently in these NGs is very familiar with the phenomenon of getting
email that begins, "I saw that you have posted a lot of answers in the
newsgroups, so I am hoping you can help me with my problem." If I send any
answer at all, it is likely to be, "When I see your question in the
newsgroups, I will be happy to answer it."

Obviously, the signature block becomes more prominent (and hence subject to
misunderstanding) when a reply is short, and many of mine are because, when
possible, I refer users to an online article that will provide a more
thorough answer.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in message
...
When someone writes about my "availing" myself of his "services" for a

simple
question asked at a newsgroup, and not of this person at all, yes, he is
rude, and this is really none of your business. Get it"

MBW

"jaartee" wrote:

Michael,

You are out of line. Just because you don't understand doesn't make
everyone else stupid and rude.

A 'ruler' is a linear measuring device, and he is simply telling you to
measure the case. So measure the case!
--
jaartee
Fellow user


"Michael www.williamsmusic.net" wrote:

Your response sounds like a joke, and that is how I take it. I also do

not
wish to "avail" msyelf of your "services". If I wish to pay a

consultant for
such a simple question, I guarantee you, you'll be the last person on

earth I
will consider. I'd rather buy another program than to pay such a rude

person
anything at all.

MBW

"Doug Robbins - Word MVP" wrote:

Use a ruler and measure the case into which you want to insert the

booklet.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of

my
services on a paid consulting basis.

Doug Robbins - Word MVP

"Michael www.williamsmusic.net"
. com wrote in

message
...
Hi, Suzanne! Thanks for your response. I am in Europe, and

everything is
metric. I just want to create a simple music CD booklet which will

contain
the lyrics to some of my songs. If I can get as far as you've

directed me
(hopefuully) please tell me in .mm what measurements I should use

to
create
a music CD booklet. I also have Publisher, if you think that

would be
better.

Thanks,


Michael

www.cdbaby.com/mbw

"Suzanne S. Barnhill" wrote:

If you have Word 2002 or above, use the "Book fold" feature. If

an
earlier
version, see

http://word.mvps.org/FAQs/Formatting...etPrinting.htm.
Very
likely you will have to set your booklet up with larger margins

on a
larger
paper size, then trim accordingly.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup
so
all may benefit.

"Michael www.williamsmusic.net"
. com wrote in

message
...
Thanks for you answer, but I'm sorry. I don't understand it.

I'm a
techno-dummy. I only know enough to get by. Can you tell me

where to
get a
CD
booklet templet or something" It'll be about 10 or 12 pages. I

have it
saved
as a Word document. You can also e-mail me directly at:


Thanks,



Michael
www.cdbaby.com/mbw

"Graham Mayor" wrote:

A CD booklet is essentially a two fixed size cell table with

a border
as
a
cutout guide and can be printed on any paper size that will

fit it.
Word is a poor tool for this job. Publisher is better, but

Surething
CD
labeller is *much* better.

If you have Nero, it too has a labelling tool that you could

use.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


Michael www.williamsmusic.net wrote:
How do I format a CD booklet in Microsoft Word? The only

paper
formats I see are U.S. letter and legal and A4.











  #23   Report Post  
Posted to microsoft.public.word.pagelayout
Greg
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

So just because you acted like an ass and got called you on it, you now
consider me a Microsoft freak.

Ok, as this is neither a barroom or barracks, I will hold close futher
opinions of you and suggestions as to what you can do with your music
and respectfully retire from the field.

  #24   Report Post  
Posted to microsoft.public.word.pagelayout
Michael www.williamsmusic.net
 
Posts: n/a
Default How do I format a CD booklet in Microsoft Word?

Gosh, Greg, don't you have a sense of humour?





"Greg" wrote:

So just because you acted like an ass and got called you on it, you now
consider me a Microsoft freak.

Ok, as this is neither a barroom or barracks, I will hold close futher
opinions of you and suggestions as to what you can do with your music
and respectfully retire from the field.


Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
take yet another lesson from wordperfect "reveal codes" wordperfect is superior Microsoft Word Help 5 May 11th 09 07:58 PM
Does Word have a QuickCorrect/Quick Word option like WordPerfect? CW New Users 2 December 20th 05 06:54 PM
In Word, how do I surpress headers and footers on page 2 Bill Microsoft Word Help 1 December 15th 05 07:13 PM
How do I set right and left alignment on the same line in Word? Matador Page Layout 1 November 9th 05 09:32 PM
In Word, how can I see all files (*.*) in "save as"? citizen53 New Users 8 April 4th 05 04:56 PM


All times are GMT +1. The time now is 01:57 PM.

Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Microsoft Office Word Forum - WordBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Word"