Home |
Search |
Today's Posts |
#1
Posted to microsoft.public.word.newusers,microsoft.public.word.pagelayout
|
|||
|
|||
Full Screen and Status Bar in Word 2007
I'm trying out Word 2007 and am baffled by the seeming absence of the
ability to hide the Status Bar (on the bottom) and the Full Screen option. Why would they neglect to put these options in? I do hope I missed something here. Otherwise I see heaps of improvements to the new layout in Word 2007. |
#2
Posted to microsoft.public.word.newusers,microsoft.public.word.pagelayout
|
|||
|
|||
Full Screen and Status Bar in Word 2007
Look under the View tab for the "Full Screen Reading" option.
-- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP, originally posted via msnews.microsoft.com "Frank A." wrote in message news I'm trying out Word 2007 and am baffled by the seeming absence of the ability to hide the Status Bar (on the bottom) and the Full Screen option. Why would they neglect to put these options in? I do hope I missed something here. Otherwise I see heaps of improvements to the new layout in Word 2007. |
#3
Posted to microsoft.public.word.newusers,microsoft.public.word.pagelayout
|
|||
|
|||
Full Screen and Status Bar in Word 2007
Full Screen Editing is not on the Ribbon but can be reached via the old
shortcut of Alt+V,U and can be exited with ESC. -- Enjoy, Tony www.WordArticles.com "Frank A." wrote in message news I'm trying out Word 2007 and am baffled by the seeming absence of the ability to hide the Status Bar (on the bottom) and the Full Screen option. Why would they neglect to put these options in? I do hope I missed something here. Otherwise I see heaps of improvements to the new layout in Word 2007. |
#4
Posted to microsoft.public.word.newusers,microsoft.public.word.pagelayout
|
|||
|
|||
Full Screen and Status Bar in Word 2007
Full Screen Editing is not on the Ribbon but can be reached via the old
shortcut of Alt+V,U and can be exited with ESC. Lol...that worked rather well. I wonder why they don't just put that in the View menu like its been for years? Also with Word 2007 there isn't that idiotic Message Box that used to appear and ruin Full Screen view. Wonderful. |
#5
Posted to microsoft.public.word.newusers,microsoft.public.word.pagelayout
|
|||
|
|||
Full Screen and Status Bar in Word 2007
Look under the View tab for the "Full Screen Reading" option.
Its almost full screen except for a menu bar at the top. Except that now it only takes up about 1/3 of my screen width. Is there any way of making it "fit to width"? With the world trying to migrate away from paper and all the waste it entails, you'd think they'd display it with more practicality. Its as if 99% of the world still prints everything and the view is supposed to exactly replicate the printed page. Its such hard work dragging these dinosaurs out of the 20th century with their reams of paper printed pointlessly, printing photos instead of investing in a decent monitor, etc. End of rant.... |
#6
Posted to microsoft.public.word.newusers,microsoft.public.word.pagelayout
|
|||
|
|||
Full Screen and Status Bar in Word 2007
An alternative is to use a macro for this, the old Full Screen view is still
available but only accessible through the VBA. Here's a macro you can use: 'Macro for switching to Full Screen view in Word Private iZoom As Integer Sub FullScreenView() With ActiveWindow If .View.FullScreen = True Then .View.FullScreen = False If iZoom 10 Then .View.Zoom = iZoom End If Else .View.FullScreen = True iZoom = .View.Zoom .View.Zoom.PageFit = wdPageFitTextFit End If End With End Sub Note you need to press Esc to close the Full Screen view. However, if you use ESC your Zoom setting will remain the same as it was when you switched to Full Screen. You may want to assign a keyboard shortcut to the macro so you can run the same macro to toggle between Full Screen and your previous view along with the Zoom setting. If you don't know how to use the macro provided in the post: - Copy the lines/code between Sub FullScreenView and End Sub - In Word, on the View tab, click the Macros button. (If you click the arrow below Macros, click View Macros) - In the Macro Name text box type: FullScreenView (Make sure you do not include spaces) - Make sure the "Macros in" list reflects "All active templates and documents" - Click "Create" - The Visual Basic for Applications (VBA) Editor will open. Paste the previously copied code between Sub FullScreenView and End Sub - Copy the first line: Private iZoom As Integer from this post - In the VBA Editor, place your insertion point at the top of the module (the white page that contains your macro) and paste the copied line. (Note if you see Option Explicit at the top then paste the line below it.) - Click the Save button to save your changes. - Click the Close button in the upper right corner to close the VBA Editor. To assign a keyboard shortcut: - Right-click your Quick Access Toolbar (QAT) and then click "Customize QAT" - Location the option for Keyboard shortcuts near the bottom and then click "Customize" - In the Categories list, select Macros (near the bottom of the list) - Select the FullScreenView macro on the right - In the "Press new keyboard shortcut" text box, press your desired keyboard shortcut on the keyboard. For example if you want to use Ctrl+Alt+S then just press those keys on the keyboard. - Click Assign. - Click Close to close the Customize Keyboard Shortcut dialog box. If you also want to add the macro to the Quick Access Toolbar, the don't close the Options dialog box and use these steps: - From the "Choose Commands From" list, select "Macros" - Select the FullScreenView macro and then click Add to add it to your QAT. - After it's been added you can use the Move Up/Move Down buttons on the right to change its order or use the Modify button near the bottom to assign a different icon and change the ScreenTip text. When you are finished, close the Options dialog box. ~Beth Melton Microsoft Office MVP "Frank A." wrote in message news I'm trying out Word 2007 and am baffled by the seeming absence of the ability to hide the Status Bar (on the bottom) and the Full Screen option. Why would they neglect to put these options in? I do hope I missed something here. Otherwise I see heaps of improvements to the new layout in Word 2007. |
#7
Posted to microsoft.public.word.newusers,microsoft.public.word.pagelayout
|
|||
|
|||
Full Screen and Status Bar in Word 2007
I do not believe that you can make it fit to width. The size is based on
displaying two pages at a time. -- Hope this helps, Doug Robbins - Word MVP Please reply only to the newsgroups unless you wish to obtain my services on a paid professional basis. "Frank A." wrote in message news Look under the View tab for the "Full Screen Reading" option. Its almost full screen except for a menu bar at the top. Except that now it only takes up about 1/3 of my screen width. Is there any way of making it "fit to width"? With the world trying to migrate away from paper and all the waste it entails, you'd think they'd display it with more practicality. Its as if 99% of the world still prints everything and the view is supposed to exactly replicate the printed page. Its such hard work dragging these dinosaurs out of the 20th century with their reams of paper printed pointlessly, printing photos instead of investing in a decent monitor, etc. End of rant.... |
#8
Posted to microsoft.public.word.newusers,microsoft.public.word.pagelayout
|
|||
|
|||
Full Screen and Status Bar in Word 2007
I do not believe that you can make it fit to width. The size is based
on displaying two pages at a time. OK - so much for that. Looks like I'll just toggle Full Screen (Alt_V_U) back and forth. Its a good, efficient and practical solution. Hurrah for Usenet! Thanks people. We would all be less productive without you. |
#9
Posted to microsoft.public.word.newusers,microsoft.public.word.pagelayout
|
|||
|
|||
Full Screen and Status Bar in Word 2007
Beth, how about Alt_V_U? And Escape to cancel. Takes about a
millisecond. Already implemented. An alternative is to use a macro for this, the old Full Screen view is still available but only accessible through the VBA. Here's a macro you can use: 'Macro for switching to Full Screen view in Word Private iZoom As Integer Sub FullScreenView() With ActiveWindow If .View.FullScreen = True Then .View.FullScreen = False If iZoom 10 Then .View.Zoom = iZoom End If Else .View.FullScreen = True iZoom = .View.Zoom .View.Zoom.PageFit = wdPageFitTextFit End If End With End Sub Note you need to press Esc to close the Full Screen view. However, if you use ESC your Zoom setting will remain the same as it was when you switched to Full Screen. You may want to assign a keyboard shortcut to the macro so you can run the same macro to toggle between Full Screen and your previous view along with the Zoom setting. If you don't know how to use the macro provided in the post: - Copy the lines/code between Sub FullScreenView and End Sub - In Word, on the View tab, click the Macros button. (If you click the arrow below Macros, click View Macros) - In the Macro Name text box type: FullScreenView (Make sure you do not include spaces) - Make sure the "Macros in" list reflects "All active templates and documents" - Click "Create" - The Visual Basic for Applications (VBA) Editor will open. Paste the previously copied code between Sub FullScreenView and End Sub - Copy the first line: Private iZoom As Integer from this post - In the VBA Editor, place your insertion point at the top of the module (the white page that contains your macro) and paste the copied line. (Note if you see Option Explicit at the top then paste the line below it.) - Click the Save button to save your changes. - Click the Close button in the upper right corner to close the VBA Editor. To assign a keyboard shortcut: - Right-click your Quick Access Toolbar (QAT) and then click "Customize QAT" - Location the option for Keyboard shortcuts near the bottom and then click "Customize" - In the Categories list, select Macros (near the bottom of the list) - Select the FullScreenView macro on the right - In the "Press new keyboard shortcut" text box, press your desired keyboard shortcut on the keyboard. For example if you want to use Ctrl+Alt+S then just press those keys on the keyboard. - Click Assign. - Click Close to close the Customize Keyboard Shortcut dialog box. If you also want to add the macro to the Quick Access Toolbar, the don't close the Options dialog box and use these steps: - From the "Choose Commands From" list, select "Macros" - Select the FullScreenView macro and then click Add to add it to your QAT. - After it's been added you can use the Move Up/Move Down buttons on the right to change its order or use the Modify button near the bottom to assign a different icon and change the ScreenTip text. When you are finished, close the Options dialog box. ~Beth Melton Microsoft Office MVP "Frank A." wrote in message news I'm trying out Word 2007 and am baffled by the seeming absence of the ability to hide the Status Bar (on the bottom) and the Full Screen option. Why would they neglect to put these options in? I do hope I missed something here. Otherwise I see heaps of improvements to the new layout in Word 2007. |
#10
Posted to microsoft.public.word.newusers,microsoft.public.word.pagelayout
|
|||
|
|||
Full Screen and Status Bar in Word 2007
Oh yeah, the old Word 2003 accelerator does still work. I seem to forget
about those. It doesn't appear to make it fit to your screen width, though, and I accommodated that for you in my macro. But I'm glad to hear you found something that works for you. :-) ~Beth Melton Microsoft Office MVP "Frank A." wrote in message news Beth, how about Alt_V_U? And Escape to cancel. Takes about a millisecond. Already implemented. An alternative is to use a macro for this, the old Full Screen view is still available but only accessible through the VBA. Here's a macro you can use: 'Macro for switching to Full Screen view in Word Private iZoom As Integer Sub FullScreenView() With ActiveWindow If .View.FullScreen = True Then .View.FullScreen = False If iZoom 10 Then .View.Zoom = iZoom End If Else .View.FullScreen = True iZoom = .View.Zoom .View.Zoom.PageFit = wdPageFitTextFit End If End With End Sub Note you need to press Esc to close the Full Screen view. However, if you use ESC your Zoom setting will remain the same as it was when you switched to Full Screen. You may want to assign a keyboard shortcut to the macro so you can run the same macro to toggle between Full Screen and your previous view along with the Zoom setting. If you don't know how to use the macro provided in the post: - Copy the lines/code between Sub FullScreenView and End Sub - In Word, on the View tab, click the Macros button. (If you click the arrow below Macros, click View Macros) - In the Macro Name text box type: FullScreenView (Make sure you do not include spaces) - Make sure the "Macros in" list reflects "All active templates and documents" - Click "Create" - The Visual Basic for Applications (VBA) Editor will open. Paste the previously copied code between Sub FullScreenView and End Sub - Copy the first line: Private iZoom As Integer from this post - In the VBA Editor, place your insertion point at the top of the module (the white page that contains your macro) and paste the copied line. (Note if you see Option Explicit at the top then paste the line below it.) - Click the Save button to save your changes. - Click the Close button in the upper right corner to close the VBA Editor. To assign a keyboard shortcut: - Right-click your Quick Access Toolbar (QAT) and then click "Customize QAT" - Location the option for Keyboard shortcuts near the bottom and then click "Customize" - In the Categories list, select Macros (near the bottom of the list) - Select the FullScreenView macro on the right - In the "Press new keyboard shortcut" text box, press your desired keyboard shortcut on the keyboard. For example if you want to use Ctrl+Alt+S then just press those keys on the keyboard. - Click Assign. - Click Close to close the Customize Keyboard Shortcut dialog box. If you also want to add the macro to the Quick Access Toolbar, the don't close the Options dialog box and use these steps: - From the "Choose Commands From" list, select "Macros" - Select the FullScreenView macro and then click Add to add it to your QAT. - After it's been added you can use the Move Up/Move Down buttons on the right to change its order or use the Modify button near the bottom to assign a different icon and change the ScreenTip text. When you are finished, close the Options dialog box. ~Beth Melton Microsoft Office MVP "Frank A." wrote in message news I'm trying out Word 2007 and am baffled by the seeming absence of the ability to hide the Status Bar (on the bottom) and the Full Screen option. Why would they neglect to put these options in? I do hope I missed something here. Otherwise I see heaps of improvements to the new layout in Word 2007. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Full Screen and Status Bar in Word 2007 | New Users | |||
How to get Full Screen Mode in Word 2007 | Page Layout | |||
Status Bar won't disappear in Full Screen. | Microsoft Word Help | |||
Word 2007 windows not full screen | Microsoft Word Help | |||
Word 2007 - Full Screen Reading customization | Microsoft Word Help |