Home |
Search |
Today's Posts |
#1
Posted to microsoft.public.word.mailmerge.fields
|
|||
|
|||
Mail merge directory using excel file
I am trying to create a directory with names and addresses, using an excel
file. I can do the whole thing except for one part. Each page has 2 columns. I would like each name and address to be across from another one so they line up. ie. Jane doe John Doe 123 main st 456 Main st anytown, USA Box 234 Any town USA The name that comes after Jane Doe will be one line higher than the name that come after John Doe. How do I get them to line up? I am using Excel and Word 2003. Please be very specific. Don't assume I know anything. Someone suggested I go to http://www.gmayor.com/convert_labels...mail_merge.htm. That was way over my head. I couldn't get it to work. |
#2
Posted to microsoft.public.word.mailmerge.fields
|
|||
|
|||
Mail merge directory using excel file
I assume you're "columns" are in your Word mail merge main document? If so,
labels and other mail merge layouts are often vertically centered. If that's the case, you should be able to click inside your Table, then Table--Select--Table, and then Table--Properties, Cell tab and align TOP. ************ Hope it helps! Anne Troy www.OfficeArticles.com Check out the NEWsgroup stats! Check out: www.ExcelUserConference.com "donna" wrote in message ... I am trying to create a directory with names and addresses, using an excel file. I can do the whole thing except for one part. Each page has 2 columns. I would like each name and address to be across from another one so they line up. ie. Jane doe John Doe 123 main st 456 Main st anytown, USA Box 234 Any town USA The name that comes after Jane Doe will be one line higher than the name that come after John Doe. How do I get them to line up? I am using Excel and Word 2003. Please be very specific. Don't assume I know anything. Someone suggested I go to http://www.gmayor.com/convert_labels...mail_merge.htm. That was way over my head. I couldn't get it to work. |
#3
Posted to microsoft.public.word.mailmerge.fields
|
|||
|
|||
Mail merge directory using excel file
How do I get the excel date into a table and when do I do it? Before I start
the merge or during it. PLease be very specific, I don't know anything about tables. Thanks! "Anne Troy" wrote: I assume you're "columns" are in your Word mail merge main document? If so, labels and other mail merge layouts are often vertically centered. If that's the case, you should be able to click inside your Table, then Table--Select--Table, and then Table--Properties, Cell tab and align TOP. ************ Hope it helps! Anne Troy www.OfficeArticles.com Check out the NEWsgroup stats! Check out: www.ExcelUserConference.com "donna" wrote in message ... I am trying to create a directory with names and addresses, using an excel file. I can do the whole thing except for one part. Each page has 2 columns. I would like each name and address to be across from another one so they line up. ie. Jane doe John Doe 123 main st 456 Main st anytown, USA Box 234 Any town USA The name that comes after Jane Doe will be one line higher than the name that come after John Doe. How do I get them to line up? I am using Excel and Word 2003. Please be very specific. Don't assume I know anything. Someone suggested I go to http://www.gmayor.com/convert_labels...mail_merge.htm. That was way over my head. I couldn't get it to work. |
#4
Posted to microsoft.public.word.mailmerge.fields
|
|||
|
|||
Mail merge directory using excel file
Did we solve your first question?
Place the Date field using Mail merge, just like you do any other. I think that if you're going to want more help, and very specific help, then we need more specific information. I don't even know what you're mail-merging...labels or letters? ************ Hope it helps! Anne Troy www.OfficeArticles.com Check out the NEWsgroup stats! Check out: www.ExcelUserConference.com "donna" wrote in message ... How do I get the excel date into a table and when do I do it? Before I start the merge or during it. PLease be very specific, I don't know anything about tables. Thanks! "Anne Troy" wrote: I assume you're "columns" are in your Word mail merge main document? If so, labels and other mail merge layouts are often vertically centered. If that's the case, you should be able to click inside your Table, then Table--Select--Table, and then Table--Properties, Cell tab and align TOP. ************ Hope it helps! Anne Troy www.OfficeArticles.com Check out the NEWsgroup stats! Check out: www.ExcelUserConference.com "donna" wrote in message ... I am trying to create a directory with names and addresses, using an excel file. I can do the whole thing except for one part. Each page has 2 columns. I would like each name and address to be across from another one so they line up. ie. Jane doe John Doe 123 main st 456 Main st anytown, USA Box 234 Any town USA The name that comes after Jane Doe will be one line higher than the name that come after John Doe. How do I get them to line up? I am using Excel and Word 2003. Please be very specific. Don't assume I know anything. Someone suggested I go to http://www.gmayor.com/convert_labels...mail_merge.htm. That was way over my head. I couldn't get it to work. |
#5
Posted to microsoft.public.word.mailmerge.fields
|
|||
|
|||
Mail merge directory using excel file
In the Mailmerge main document, insert a one row, two column table (if you
want two columns) or a three column table if you want the information in three columns. Then into each of the cells in that table, insert the merge fields in the configuration that you want them. Then before the first merge field in the second cell (and the third if you have one), insert a Next Record field. Now when you execute the merge to a new document, you should get what you want. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "donna" wrote in message ... How do I get the excel date into a table and when do I do it? Before I start the merge or during it. PLease be very specific, I don't know anything about tables. Thanks! "Anne Troy" wrote: I assume you're "columns" are in your Word mail merge main document? If so, labels and other mail merge layouts are often vertically centered. If that's the case, you should be able to click inside your Table, then Table--Select--Table, and then Table--Properties, Cell tab and align TOP. ************ Hope it helps! Anne Troy www.OfficeArticles.com Check out the NEWsgroup stats! Check out: www.ExcelUserConference.com "donna" wrote in message ... I am trying to create a directory with names and addresses, using an excel file. I can do the whole thing except for one part. Each page has 2 columns. I would like each name and address to be across from another one so they line up. ie. Jane doe John Doe 123 main st 456 Main st anytown, USA Box 234 Any town USA The name that comes after Jane Doe will be one line higher than the name that come after John Doe. How do I get them to line up? I am using Excel and Word 2003. Please be very specific. Don't assume I know anything. Someone suggested I go to http://www.gmayor.com/convert_labels...mail_merge.htm. That was way over my head. I couldn't get it to work. |
#6
Posted to microsoft.public.word.mailmerge.fields
|
|||
|
|||
Mail merge directory using excel file
Doug, I tried that and the last cell on the page doesn't have enough room, so
the names in each for the 2 columns are continued on the next page. So you might have the last name and the street in the last cell in the column with that persons city on the next page. I need it all in one cell. I tried "keep with next" and "keep with next" in the format screen. It didn't work. Also, is it possible to have the sequence be verticle? ie: page 1 a d b e c f page 2 g j h k i l "Doug Robbins - Word MVP" wrote: In the Mailmerge main document, insert a one row, two column table (if you want two columns) or a three column table if you want the information in three columns. Then into each of the cells in that table, insert the merge fields in the configuration that you want them. Then before the first merge field in the second cell (and the third if you have one), insert a Next Record field. Now when you execute the merge to a new document, you should get what you want. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "donna" wrote in message ... How do I get the excel date into a table and when do I do it? Before I start the merge or during it. PLease be very specific, I don't know anything about tables. Thanks! "Anne Troy" wrote: I assume you're "columns" are in your Word mail merge main document? If so, labels and other mail merge layouts are often vertically centered. If that's the case, you should be able to click inside your Table, then Table--Select--Table, and then Table--Properties, Cell tab and align TOP. ************ Hope it helps! Anne Troy www.OfficeArticles.com Check out the NEWsgroup stats! Check out: www.ExcelUserConference.com "donna" wrote in message ... I am trying to create a directory with names and addresses, using an excel file. I can do the whole thing except for one part. Each page has 2 columns. I would like each name and address to be across from another one so they line up. ie. Jane doe John Doe 123 main st 456 Main st anytown, USA Box 234 Any town USA The name that comes after Jane Doe will be one line higher than the name that come after John Doe. How do I get them to line up? I am using Excel and Word 2003. Please be very specific. Don't assume I know anything. Someone suggested I go to http://www.gmayor.com/convert_labels...mail_merge.htm. That was way over my head. I couldn't get it to work. |
#7
Posted to microsoft.public.word.mailmerge.fields
|
|||
|
|||
Mail merge directory using excel file
I'm doing a project very similar to yours. This may not be the best or most
efficient way, but I did a mail merge using the 'Directory' option in Mail Merge. Then, after the merge, formatted the Word document with two columns. I then simply edited the document to add and remove spaces to get the alignment I wanted. Took half an hour or so for a directory with 750 names, addresses, etc. "donna" wrote: Doug, I tried that and the last cell on the page doesn't have enough room, so the names in each for the 2 columns are continued on the next page. So you might have the last name and the street in the last cell in the column with that persons city on the next page. I need it all in one cell. I tried "keep with next" and "keep with next" in the format screen. It didn't work. Also, is it possible to have the sequence be verticle? ie: page 1 a d b e c f page 2 g j h k i l "Doug Robbins - Word MVP" wrote: In the Mailmerge main document, insert a one row, two column table (if you want two columns) or a three column table if you want the information in three columns. Then into each of the cells in that table, insert the merge fields in the configuration that you want them. Then before the first merge field in the second cell (and the third if you have one), insert a Next Record field. Now when you execute the merge to a new document, you should get what you want. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "donna" wrote in message ... How do I get the excel date into a table and when do I do it? Before I start the merge or during it. PLease be very specific, I don't know anything about tables. Thanks! "Anne Troy" wrote: I assume you're "columns" are in your Word mail merge main document? If so, labels and other mail merge layouts are often vertically centered. If that's the case, you should be able to click inside your Table, then Table--Select--Table, and then Table--Properties, Cell tab and align TOP. ************ Hope it helps! Anne Troy www.OfficeArticles.com Check out the NEWsgroup stats! Check out: www.ExcelUserConference.com "donna" wrote in message ... I am trying to create a directory with names and addresses, using an excel file. I can do the whole thing except for one part. Each page has 2 columns. I would like each name and address to be across from another one so they line up. ie. Jane doe John Doe 123 main st 456 Main st anytown, USA Box 234 Any town USA The name that comes after Jane Doe will be one line higher than the name that come after John Doe. How do I get them to line up? I am using Excel and Word 2003. Please be very specific. Don't assume I know anything. Someone suggested I go to http://www.gmayor.com/convert_labels...mail_merge.htm. That was way over my head. I couldn't get it to work. |
#8
Posted to microsoft.public.word.mailmerge.fields
|
|||
|
|||
Mail merge directory using excel file
Thanks, that's what I will probably do. I'd like to learn the correct way
for future use though. I need to know how to fix the sequence that the names are listed on the page as I've described below. I have actually figured out the problem with addresses being split. Go into "table" then "properties", "cell" "options" then make sure "wrap text" and "fit text" are not checked. "Richard Tackett" wrote: I'm doing a project very similar to yours. This may not be the best or most efficient way, but I did a mail merge using the 'Directory' option in Mail Merge. Then, after the merge, formatted the Word document with two columns. I then simply edited the document to add and remove spaces to get the alignment I wanted. Took half an hour or so for a directory with 750 names, addresses, etc. "donna" wrote: Doug, I tried that and the last cell on the page doesn't have enough room, so the names in each for the 2 columns are continued on the next page. So you might have the last name and the street in the last cell in the column with that persons city on the next page. I need it all in one cell. I tried "keep with next" and "keep with next" in the format screen. It didn't work. Also, is it possible to have the sequence be verticle? ie: page 1 a d b e c f page 2 g j h k i l "Doug Robbins - Word MVP" wrote: In the Mailmerge main document, insert a one row, two column table (if you want two columns) or a three column table if you want the information in three columns. Then into each of the cells in that table, insert the merge fields in the configuration that you want them. Then before the first merge field in the second cell (and the third if you have one), insert a Next Record field. Now when you execute the merge to a new document, you should get what you want. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "donna" wrote in message ... How do I get the excel date into a table and when do I do it? Before I start the merge or during it. PLease be very specific, I don't know anything about tables. Thanks! "Anne Troy" wrote: I assume you're "columns" are in your Word mail merge main document? If so, labels and other mail merge layouts are often vertically centered. If that's the case, you should be able to click inside your Table, then Table--Select--Table, and then Table--Properties, Cell tab and align TOP. ************ Hope it helps! Anne Troy www.OfficeArticles.com Check out the NEWsgroup stats! Check out: www.ExcelUserConference.com "donna" wrote in message ... I am trying to create a directory with names and addresses, using an excel file. I can do the whole thing except for one part. Each page has 2 columns. I would like each name and address to be across from another one so they line up. ie. Jane doe John Doe 123 main st 456 Main st anytown, USA Box 234 Any town USA The name that comes after Jane Doe will be one line higher than the name that come after John Doe. How do I get them to line up? I am using Excel and Word 2003. Please be very specific. Don't assume I know anything. Someone suggested I go to http://www.gmayor.com/convert_labels...mail_merge.htm. That was way over my head. I couldn't get it to work. |
#9
Posted to microsoft.public.word.mailmerge.fields
|
|||
|
|||
Mail merge directory using excel file
From the Tables menu, select Properties and on the Row tab, uncheck the box
for "allowing the row to break across a page" -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "donna" wrote in message ... Doug, I tried that and the last cell on the page doesn't have enough room, so the names in each for the 2 columns are continued on the next page. So you might have the last name and the street in the last cell in the column with that persons city on the next page. I need it all in one cell. I tried "keep with next" and "keep with next" in the format screen. It didn't work. Also, is it possible to have the sequence be verticle? ie: page 1 a d b e c f page 2 g j h k i l "Doug Robbins - Word MVP" wrote: In the Mailmerge main document, insert a one row, two column table (if you want two columns) or a three column table if you want the information in three columns. Then into each of the cells in that table, insert the merge fields in the configuration that you want them. Then before the first merge field in the second cell (and the third if you have one), insert a Next Record field. Now when you execute the merge to a new document, you should get what you want. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "donna" wrote in message ... How do I get the excel date into a table and when do I do it? Before I start the merge or during it. PLease be very specific, I don't know anything about tables. Thanks! "Anne Troy" wrote: I assume you're "columns" are in your Word mail merge main document? If so, labels and other mail merge layouts are often vertically centered. If that's the case, you should be able to click inside your Table, then Table--Select--Table, and then Table--Properties, Cell tab and align TOP. ************ Hope it helps! Anne Troy www.OfficeArticles.com Check out the NEWsgroup stats! Check out: www.ExcelUserConference.com "donna" wrote in message ... I am trying to create a directory with names and addresses, using an excel file. I can do the whole thing except for one part. Each page has 2 columns. I would like each name and address to be across from another one so they line up. ie. Jane doe John Doe 123 main st 456 Main st anytown, USA Box 234 Any town USA The name that comes after Jane Doe will be one line higher than the name that come after John Doe. How do I get them to line up? I am using Excel and Word 2003. Please be very specific. Don't assume I know anything. Someone suggested I go to http://www.gmayor.com/convert_labels...mail_merge.htm. That was way over my head. I couldn't get it to work. |
#10
Posted to microsoft.public.word.mailmerge.fields
|
|||
|
|||
Mail merge directory using excel file
How do you get it to write in the 2nd column? My 2nd column has nothing in
it now. "Doug Robbins - Word MVP" wrote: From the Tables menu, select Properties and on the Row tab, uncheck the box for "allowing the row to break across a page" -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "donna" wrote in message ... Doug, I tried that and the last cell on the page doesn't have enough room, so the names in each for the 2 columns are continued on the next page. So you might have the last name and the street in the last cell in the column with that persons city on the next page. I need it all in one cell. I tried "keep with next" and "keep with next" in the format screen. It didn't work. Also, is it possible to have the sequence be verticle? ie: page 1 a d b e c f page 2 g j h k i l "Doug Robbins - Word MVP" wrote: In the Mailmerge main document, insert a one row, two column table (if you want two columns) or a three column table if you want the information in three columns. Then into each of the cells in that table, insert the merge fields in the configuration that you want them. Then before the first merge field in the second cell (and the third if you have one), insert a Next Record field. Now when you execute the merge to a new document, you should get what you want. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "donna" wrote in message ... How do I get the excel date into a table and when do I do it? Before I start the merge or during it. PLease be very specific, I don't know anything about tables. Thanks! "Anne Troy" wrote: I assume you're "columns" are in your Word mail merge main document? If so, labels and other mail merge layouts are often vertically centered. If that's the case, you should be able to click inside your Table, then Table--Select--Table, and then Table--Properties, Cell tab and align TOP. ************ Hope it helps! Anne Troy www.OfficeArticles.com Check out the NEWsgroup stats! Check out: www.ExcelUserConference.com "donna" wrote in message ... I am trying to create a directory with names and addresses, using an excel file. I can do the whole thing except for one part. Each page has 2 columns. I would like each name and address to be across from another one so they line up. ie. Jane doe John Doe 123 main st 456 Main st anytown, USA Box 234 Any town USA The name that comes after Jane Doe will be one line higher than the name that come after John Doe. How do I get them to line up? I am using Excel and Word 2003. Please be very specific. Don't assume I know anything. Someone suggested I go to http://www.gmayor.com/convert_labels...mail_merge.htm. That was way over my head. I couldn't get it to work. |
#11
Posted to microsoft.public.word.mailmerge.fields
|
|||
|
|||
Mail merge directory using excel file
Go back to my response of 2/14. It was detailed there how to do it.
-- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "donna" wrote in message ... How do you get it to write in the 2nd column? My 2nd column has nothing in it now. "Doug Robbins - Word MVP" wrote: From the Tables menu, select Properties and on the Row tab, uncheck the box for "allowing the row to break across a page" -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "donna" wrote in message ... Doug, I tried that and the last cell on the page doesn't have enough room, so the names in each for the 2 columns are continued on the next page. So you might have the last name and the street in the last cell in the column with that persons city on the next page. I need it all in one cell. I tried "keep with next" and "keep with next" in the format screen. It didn't work. Also, is it possible to have the sequence be verticle? ie: page 1 a d b e c f page 2 g j h k i l "Doug Robbins - Word MVP" wrote: In the Mailmerge main document, insert a one row, two column table (if you want two columns) or a three column table if you want the information in three columns. Then into each of the cells in that table, insert the merge fields in the configuration that you want them. Then before the first merge field in the second cell (and the third if you have one), insert a Next Record field. Now when you execute the merge to a new document, you should get what you want. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "donna" wrote in message ... How do I get the excel date into a table and when do I do it? Before I start the merge or during it. PLease be very specific, I don't know anything about tables. Thanks! "Anne Troy" wrote: I assume you're "columns" are in your Word mail merge main document? If so, labels and other mail merge layouts are often vertically centered. If that's the case, you should be able to click inside your Table, then Table--Select--Table, and then Table--Properties, Cell tab and align TOP. ************ Hope it helps! Anne Troy www.OfficeArticles.com Check out the NEWsgroup stats! Check out: www.ExcelUserConference.com "donna" wrote in message ... I am trying to create a directory with names and addresses, using an excel file. I can do the whole thing except for one part. Each page has 2 columns. I would like each name and address to be across from another one so they line up. ie. Jane doe John Doe 123 main st 456 Main st anytown, USA Box 234 Any town USA The name that comes after Jane Doe will be one line higher than the name that come after John Doe. How do I get them to line up? I am using Excel and Word 2003. Please be very specific. Don't assume I know anything. Someone suggested I go to http://www.gmayor.com/convert_labels...mail_merge.htm. That was way over my head. I couldn't get it to work. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How do you move file from mail merge to excel? | Mailmerge | |||
Numeric rounding problems in mail merge with excel data source. | Mailmerge | |||
Word 2002 cannot find its Excel data source for mail merge | Mailmerge | |||
Mail merge has stopped working with Excel input | Mailmerge | |||
Attaching different Excel files to emailed mail merge using merge. | Mailmerge |