A Microsoft Word forum. Microsoft Office Word Forum - WordBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Microsoft Office Word Forum - WordBanter forum » Microsoft Word Newsgroups » New Users
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

how do i set up template in vbeditor without proggramming language



 
 
Thread Tools Display Modes
  #1  
Old September 29th 05, 07:19 PM
ARRRGH
external usenet poster
 
Posts: n/a
Default how do i set up template in vbeditor without proggramming language

Our comapny has just made the switch from Wordperfect to Word 2003. I've
done/created a basic memo tutorial ( I just cut and paste the program code)
but was wondering if there was anyway to create the user forms without
knowing the programming language??

Thanks
Ads
  #2  
Old September 29th 05, 08:49 PM
Charles Kenyon
external usenet poster
 
Posts: n/a
Default

No, there is not. A UserForm is a vba construct, a custom dialog box.
However there are ASK fields, Fill-In fields, and On-Line Forms, none of
which require knowledge of vba.

Here is some general info on moving from Word Perfect to Word:

Word and Word Perfect work very differently from one another. Each program's
methods have strengths and weaknesses; but, if you try to use one of these
programs as if it were the other, it is like pushing on a string! You can
easily make a lot of extra work for yourself. If you are unwilling to take
the time to learn to use Word's methods, you should stick to using Word Pad.
You'll have a lot less grief, although you'll miss out on a lot of raw
power. In the (short) long term spending the time to learn Word will save
you time if you are spending any time at all (more than an hour a day) using
Word.

See http://www.addbalance.com/word/wordperfect.htm
http://www.mvps.org/word/FAQs/Genera...ordPerfect.htm
http://www.mvps.org/word/FAQs/Genera...AndGotchas.htm
http://www.mvps.org/word/FAQs/General/RevealCodes.htm
http://www.mvps.org/word/FAQs/Genera...Converters.htm
http://businesssoft.about.com/comput.../blconvert.htm
for information on Word for Word Perfect users.

For mo
http://www.mvps.org/word/FAQs/Custom...platePart2.htm
http://www.mvps.org/word/FAQs/Custom...platePart1.htm
http://www.addbalance.com/usersguide/templates.htm
http://www.mvps.org/word/FAQs/Number...gExplained.htm
http://www.addbalance.com/usersguide/styles.htm
http://www.mvps.org/word/FAQs/Custom...latesStore.htm


Function Keys

In Word 2000 (or later) You can get the function keys to display in a
special toolbar at the bottom of the screen if you want (something like
pressing F3 twice in WP). The following macro will do this.
Sub ShowMeFunctionKeys()
Commandbars("Function Key Display").Visible = True
End Sub

Word's Extend key (F8) gives something similar to block processing.


Formatting and Styles

Learn about Styles - really learn!
http://www.addbalance.com/usersguide/styles.htm I resisted for years and now
regret every day of those years because although that string was still very
hard to push, it kept getting longer and longer, and had some very important
projects tied to it! Once you understand styles and the Word concept of
organizing things into Chinese boxes everything falls into place and instead
of pushing a string, you can push a button that turns on the very powerful
text processing machine known as Microsoft Word and it will start doing your
work for you instead of running around behind you trying to undo what you
just thought you did.


Converting documents Word / Word Perfect

Some special characters in Word Perfect documents don't convert well to
Word. There is a macro to assist with this described at
http://www.columbia.edu/~em36/wpdos/...html#macroword and can be found
at http://www.columbia.edu/~em36/wpdos/WPSymbolConv.bas.
This was prepared by Edward Mendelson.
Otherwise, look at the macro from http://support.microsoft.com/?kbid=212396
Use these on _copies_!

As for converting documents from Word Perfect to _use_ in Word... In a word,
don't plan on it. I would not recommend using converted documents long-term.
They will be filled with formatting anomolies that will get you at the worst
time. This is especially true of any documents containing automatic
numbering or bullets. Try recreating form documents in Word using the
following process:
In Word Perfect (if you still have it, in Word if not) save your files as
text files.
Use your converted files as references to show you how you want your
formatting to look.
Create a new document in Word and insert the text from the text file. Save
this new document as a Word template. Format it the way you want using
styles, not direct formatting. Save it again.
To use a template within Word, use File = New and pick your template. This
will create a new document for you.

Merge documents have special problems and should be recreated from text
files or retyped in Word. To convert data files, consider generating labels
in WP as a document, converting that to Word, and then using
http://www.gmayor.com/convert_labels...mail_merge.htm to get a new Word
data file.

Note that conversions usually do create documents that look passable and
print OK; the problems I'm referring to have to do with editing / making
changes, that is, using the documents long-term. (See below on reusing
documents vs. using templates.)

Conversion back to Word Perfect: There is a problem (in addition to the ones
mentioned for conversion _to_ Word) with Version 2002 (XP) and later of
Word. The conversion file only works for conversion _to_ Word, not from Word
to Word Perfect! Earlier versions went both ways. To fix this, you need to
find the old conversion file WPFT532.CNV from a Word 97 or Word 2000
installation and copy it to your new installation, replacing the file of the
same name. Note, the change making the file one-way was done as a security
measure. While I don't know of any problems the old file causes, keep the
new installation's file somewhere as a backup just in case.


Boilerplate and Forms

In WP a lot of people use macros to hold chunks of text - boilerplate. In
Word this function is filled by Templates, AutoText and AutoCorrect, not
macros. Follow the links at
http://addbalance.com/word/wordwebre...s.htm#AutoText for more
information on these tools.

You can use FILLIN and ASK fields or UserForms to query the user. For more
about online forms, follow the links at
http://addbalance.com/word/wordwebresources.htm#Forms or
http://word.mvps.org/FAQs/Customizat...nTheBlanks.htm especially Dian
Chapman's series of articles. You may also want to look at
http://www.word.mvps.org/FAQs/TblsFl...nesInForms.htm.


Reusing Documents vs. Using templates

General practice in WP is to have a document and copy and edit it to create
a new document. This is not good practice in Word. In Word, construct a
good, tight, template for your documents and use that template when
constructing new documents. Among other things, this can avoid embarrassing
"metadata" (http://www.addbalance.com/usersguide/metadata.htm) and things
like surprise headers and footers from creeping into new documents.

It's a lot of reading, I know. It's OK to chunk it down and do a bit each
day, but I would recommend that you make it a top priority to do that bit
each day. In the (short) long run, it will save you both time and grief.
--

Charles Kenyon

Word New User FAQ & Web Directory: http://addbalance.com/word

Intermediate User's Guide to Microsoft Word (supplemented version of
Microsoft's Legal Users' Guide) http://addbalance.com/usersguide

See also the MVP FAQ: http://www.mvps.org/word which is awesome!
--------- --------- --------- --------- --------- ---------
This message is posted to a newsgroup. Please post replies
and questions to the newsgroup so that others can learn
from my ignorance and your wisdom.

"ARRRGH" wrote in message
...
Our comapny has just made the switch from Wordperfect to Word 2003. I've
done/created a basic memo tutorial ( I just cut and paste the program
code)
but was wondering if there was anyway to create the user forms without
knowing the programming language??

Thanks



  #3  
Old September 29th 05, 09:05 PM
ARRRGH
external usenet poster
 
Posts: n/a
Default

thanks for your reply.... I havnt had a chance to check out all the links yet
but i will...I've already created simple forms with fields but just to make
sure i understood you correctly the only way to create a custom dialog box in
word is through VBA.....If this is the case can you guide me to where i can
get more information about the programming codes used so I can learn to
create my own codes to suit my purposes??

Thanks again

"Charles Kenyon" wrote:

No, there is not. A UserForm is a vba construct, a custom dialog box.
However there are ASK fields, Fill-In fields, and On-Line Forms, none of
which require knowledge of vba.

Here is some general info on moving from Word Perfect to Word:

Word and Word Perfect work very differently from one another. Each program's
methods have strengths and weaknesses; but, if you try to use one of these
programs as if it were the other, it is like pushing on a string! You can
easily make a lot of extra work for yourself. If you are unwilling to take
the time to learn to use Word's methods, you should stick to using Word Pad.
You'll have a lot less grief, although you'll miss out on a lot of raw
power. In the (short) long term spending the time to learn Word will save
you time if you are spending any time at all (more than an hour a day) using
Word.

See http://www.addbalance.com/word/wordperfect.htm
http://www.mvps.org/word/FAQs/Genera...ordPerfect.htm
http://www.mvps.org/word/FAQs/Genera...AndGotchas.htm
http://www.mvps.org/word/FAQs/General/RevealCodes.htm
http://www.mvps.org/word/FAQs/Genera...Converters.htm
http://businesssoft.about.com/comput.../blconvert.htm
for information on Word for Word Perfect users.

For mo
http://www.mvps.org/word/FAQs/Custom...platePart2.htm
http://www.mvps.org/word/FAQs/Custom...platePart1.htm
http://www.addbalance.com/usersguide/templates.htm
http://www.mvps.org/word/FAQs/Number...gExplained.htm
http://www.addbalance.com/usersguide/styles.htm
http://www.mvps.org/word/FAQs/Custom...latesStore.htm


Function Keys

In Word 2000 (or later) You can get the function keys to display in a
special toolbar at the bottom of the screen if you want (something like
pressing F3 twice in WP). The following macro will do this.
Sub ShowMeFunctionKeys()
Commandbars("Function Key Display").Visible = True
End Sub

Word's Extend key (F8) gives something similar to block processing.


Formatting and Styles

Learn about Styles - really learn!
http://www.addbalance.com/usersguide/styles.htm I resisted for years and now
regret every day of those years because although that string was still very
hard to push, it kept getting longer and longer, and had some very important
projects tied to it! Once you understand styles and the Word concept of
organizing things into Chinese boxes everything falls into place and instead
of pushing a string, you can push a button that turns on the very powerful
text processing machine known as Microsoft Word and it will start doing your
work for you instead of running around behind you trying to undo what you
just thought you did.


Converting documents Word / Word Perfect

Some special characters in Word Perfect documents don't convert well to
Word. There is a macro to assist with this described at
http://www.columbia.edu/~em36/wpdos/...html#macroword and can be found
at http://www.columbia.edu/~em36/wpdos/WPSymbolConv.bas.
This was prepared by Edward Mendelson.
Otherwise, look at the macro from http://support.microsoft.com/?kbid=212396
Use these on _copies_!

As for converting documents from Word Perfect to _use_ in Word... In a word,
don't plan on it. I would not recommend using converted documents long-term.
They will be filled with formatting anomolies that will get you at the worst
time. This is especially true of any documents containing automatic
numbering or bullets. Try recreating form documents in Word using the
following process:
In Word Perfect (if you still have it, in Word if not) save your files as
text files.
Use your converted files as references to show you how you want your
formatting to look.
Create a new document in Word and insert the text from the text file. Save
this new document as a Word template. Format it the way you want using
styles, not direct formatting. Save it again.
To use a template within Word, use File = New and pick your template. This
will create a new document for you.

Merge documents have special problems and should be recreated from text
files or retyped in Word. To convert data files, consider generating labels
in WP as a document, converting that to Word, and then using
http://www.gmayor.com/convert_labels...mail_merge.htm to get a new Word
data file.

Note that conversions usually do create documents that look passable and
print OK; the problems I'm referring to have to do with editing / making
changes, that is, using the documents long-term. (See below on reusing
documents vs. using templates.)

Conversion back to Word Perfect: There is a problem (in addition to the ones
mentioned for conversion _to_ Word) with Version 2002 (XP) and later of
Word. The conversion file only works for conversion _to_ Word, not from Word
to Word Perfect! Earlier versions went both ways. To fix this, you need to
find the old conversion file WPFT532.CNV from a Word 97 or Word 2000
installation and copy it to your new installation, replacing the file of the
same name. Note, the change making the file one-way was done as a security
measure. While I don't know of any problems the old file causes, keep the
new installation's file somewhere as a backup just in case.


Boilerplate and Forms

In WP a lot of people use macros to hold chunks of text - boilerplate. In
Word this function is filled by Templates, AutoText and AutoCorrect, not
macros. Follow the links at
http://addbalance.com/word/wordwebre...s.htm#AutoText for more
information on these tools.

You can use FILLIN and ASK fields or UserForms to query the user. For more
about online forms, follow the links at
http://addbalance.com/word/wordwebresources.htm#Forms or
http://word.mvps.org/FAQs/Customizat...nTheBlanks.htm especially Dian
Chapman's series of articles. You may also want to look at
http://www.word.mvps.org/FAQs/TblsFl...nesInForms.htm.


Reusing Documents vs. Using templates

General practice in WP is to have a document and copy and edit it to create
a new document. This is not good practice in Word. In Word, construct a
good, tight, template for your documents and use that template when
constructing new documents. Among other things, this can avoid embarrassing
"metadata" (http://www.addbalance.com/usersguide/metadata.htm) and things
like surprise headers and footers from creeping into new documents.

It's a lot of reading, I know. It's OK to chunk it down and do a bit each
day, but I would recommend that you make it a top priority to do that bit
each day. In the (short) long run, it will save you both time and grief.
--

Charles Kenyon

Word New User FAQ & Web Directory: http://addbalance.com/word

Intermediate User's Guide to Microsoft Word (supplemented version of
Microsoft's Legal Users' Guide) http://addbalance.com/usersguide

See also the MVP FAQ: http://www.mvps.org/word which is awesome!
--------- --------- --------- --------- --------- ---------
This message is posted to a newsgroup. Please post replies
and questions to the newsgroup so that others can learn
from my ignorance and your wisdom.

"ARRRGH" wrote in message
...
Our comapny has just made the switch from Wordperfect to Word 2003. I've
done/created a basic memo tutorial ( I just cut and paste the program
code)
but was wondering if there was anyway to create the user forms without
knowing the programming language??

Thanks




  #4  
Old September 29th 05, 09:19 PM
Charles Kenyon
external usenet poster
 
Posts: n/a
Default

http://word.mvps.org/FAQs/Userforms/CreateAUserForm.htm
http://word.mvps.org/FAQs/Userforms.htm
http://word.mvps.org/FAQs/MacrosVBA.htm

First, though, spend the time learning how Word works! Otherwise you will be
reinventing the wheel!
--
Charles Kenyon

Word New User FAQ & Web Directory: http://addbalance.com/word

Intermediate User's Guide to Microsoft Word (supplemented version of
Microsoft's Legal Users' Guide) http://addbalance.com/usersguide

See also the MVP FAQ: http://www.mvps.org/word which is awesome!
--------- --------- --------- --------- --------- ---------
This message is posted to a newsgroup. Please post replies
and questions to the newsgroup so that others can learn
from my ignorance and your wisdom.

"ARRRGH" wrote in message
news
thanks for your reply.... I havnt had a chance to check out all the links
yet
but i will...I've already created simple forms with fields but just to
make
sure i understood you correctly the only way to create a custom dialog box
in
word is through VBA.....If this is the case can you guide me to where i
can
get more information about the programming codes used so I can learn to
create my own codes to suit my purposes??

Thanks again

"Charles Kenyon" wrote:

No, there is not. A UserForm is a vba construct, a custom dialog box.
However there are ASK fields, Fill-In fields, and On-Line Forms, none of
which require knowledge of vba.

Here is some general info on moving from Word Perfect to Word:

Word and Word Perfect work very differently from one another. Each
program's
methods have strengths and weaknesses; but, if you try to use one of
these
programs as if it were the other, it is like pushing on a string! You can
easily make a lot of extra work for yourself. If you are unwilling to
take
the time to learn to use Word's methods, you should stick to using Word
Pad.
You'll have a lot less grief, although you'll miss out on a lot of raw
power. In the (short) long term spending the time to learn Word will save
you time if you are spending any time at all (more than an hour a day)
using
Word.

See http://www.addbalance.com/word/wordperfect.htm
http://www.mvps.org/word/FAQs/Genera...ordPerfect.htm
http://www.mvps.org/word/FAQs/Genera...AndGotchas.htm
http://www.mvps.org/word/FAQs/General/RevealCodes.htm
http://www.mvps.org/word/FAQs/Genera...Converters.htm
http://businesssoft.about.com/comput.../blconvert.htm
for information on Word for Word Perfect users.

For mo
http://www.mvps.org/word/FAQs/Custom...platePart2.htm
http://www.mvps.org/word/FAQs/Custom...platePart1.htm
http://www.addbalance.com/usersguide/templates.htm
http://www.mvps.org/word/FAQs/Number...gExplained.htm
http://www.addbalance.com/usersguide/styles.htm
http://www.mvps.org/word/FAQs/Custom...latesStore.htm


Function Keys

In Word 2000 (or later) You can get the function keys to display in a
special toolbar at the bottom of the screen if you want (something like
pressing F3 twice in WP). The following macro will do this.
Sub ShowMeFunctionKeys()
Commandbars("Function Key Display").Visible = True
End Sub

Word's Extend key (F8) gives something similar to block processing.


Formatting and Styles

Learn about Styles - really learn!
http://www.addbalance.com/usersguide/styles.htm I resisted for years and
now
regret every day of those years because although that string was still
very
hard to push, it kept getting longer and longer, and had some very
important
projects tied to it! Once you understand styles and the Word concept of
organizing things into Chinese boxes everything falls into place and
instead
of pushing a string, you can push a button that turns on the very
powerful
text processing machine known as Microsoft Word and it will start doing
your
work for you instead of running around behind you trying to undo what you
just thought you did.


Converting documents Word / Word Perfect

Some special characters in Word Perfect documents don't convert well to
Word. There is a macro to assist with this described at
http://www.columbia.edu/~em36/wpdos/...html#macroword and can be
found
at http://www.columbia.edu/~em36/wpdos/WPSymbolConv.bas.
This was prepared by Edward Mendelson.
Otherwise, look at the macro from
http://support.microsoft.com/?kbid=212396
Use these on _copies_!

As for converting documents from Word Perfect to _use_ in Word... In a
word,
don't plan on it. I would not recommend using converted documents
long-term.
They will be filled with formatting anomolies that will get you at the
worst
time. This is especially true of any documents containing automatic
numbering or bullets. Try recreating form documents in Word using the
following process:
In Word Perfect (if you still have it, in Word if not) save your files as
text files.
Use your converted files as references to show you how you want your
formatting to look.
Create a new document in Word and insert the text from the text file.
Save
this new document as a Word template. Format it the way you want using
styles, not direct formatting. Save it again.
To use a template within Word, use File = New and pick your template.
This
will create a new document for you.

Merge documents have special problems and should be recreated from text
files or retyped in Word. To convert data files, consider generating
labels
in WP as a document, converting that to Word, and then using
http://www.gmayor.com/convert_labels...mail_merge.htm to get a new
Word
data file.

Note that conversions usually do create documents that look passable and
print OK; the problems I'm referring to have to do with editing / making
changes, that is, using the documents long-term. (See below on reusing
documents vs. using templates.)

Conversion back to Word Perfect: There is a problem (in addition to the
ones
mentioned for conversion _to_ Word) with Version 2002 (XP) and later of
Word. The conversion file only works for conversion _to_ Word, not from
Word
to Word Perfect! Earlier versions went both ways. To fix this, you need
to
find the old conversion file WPFT532.CNV from a Word 97 or Word 2000
installation and copy it to your new installation, replacing the file of
the
same name. Note, the change making the file one-way was done as a
security
measure. While I don't know of any problems the old file causes, keep the
new installation's file somewhere as a backup just in case.


Boilerplate and Forms

In WP a lot of people use macros to hold chunks of text - boilerplate. In
Word this function is filled by Templates, AutoText and AutoCorrect, not
macros. Follow the links at
http://addbalance.com/word/wordwebre...s.htm#AutoText for more
information on these tools.

You can use FILLIN and ASK fields or UserForms to query the user. For
more
about online forms, follow the links at
http://addbalance.com/word/wordwebresources.htm#Forms or
http://word.mvps.org/FAQs/Customizat...nTheBlanks.htm especially
Dian
Chapman's series of articles. You may also want to look at
http://www.word.mvps.org/FAQs/TblsFl...nesInForms.htm.


Reusing Documents vs. Using templates

General practice in WP is to have a document and copy and edit it to
create
a new document. This is not good practice in Word. In Word, construct a
good, tight, template for your documents and use that template when
constructing new documents. Among other things, this can avoid
embarrassing
"metadata" (http://www.addbalance.com/usersguide/metadata.htm) and things
like surprise headers and footers from creeping into new documents.

It's a lot of reading, I know. It's OK to chunk it down and do a bit each
day, but I would recommend that you make it a top priority to do that bit
each day. In the (short) long run, it will save you both time and grief.
--

Charles Kenyon

Word New User FAQ & Web Directory: http://addbalance.com/word

Intermediate User's Guide to Microsoft Word (supplemented version of
Microsoft's Legal Users' Guide) http://addbalance.com/usersguide

See also the MVP FAQ: http://www.mvps.org/word which is awesome!
--------- --------- --------- --------- --------- ---------
This message is posted to a newsgroup. Please post replies
and questions to the newsgroup so that others can learn
from my ignorance and your wisdom.

"ARRRGH" wrote in message
...
Our comapny has just made the switch from Wordperfect to Word 2003.
I've
done/created a basic memo tutorial ( I just cut and paste the program
code)
but was wondering if there was anyway to create the user forms without
knowing the programming language??

Thanks






  #5  
Old October 1st 05, 03:19 AM
Dian D. Chapman, MVP
external usenet poster
 
Posts: n/a
Default

See this link:

http://www.mousetrax.com/techpage.html#autoforms

Start with the Please Fill Out This Form Series (skip # 5, it's
advanced) and then check out the other articles in the AutoForm group
at that link.

Dian D. Chapman, Technical Consultant
Microsoft MVP, MOS Certified
Editor/TechTrax Ezine

View Hurricane Humane Updates: http://www.mousetrax.com/pets.html

Free Tutorials: http://www.mousetrax.com/techtrax
Optimize your business docs: http://www.mousetrax.com/consulting
Learn VBA the easy way: http://www.mousetrax.com/techcourses.html



On Thu, 29 Sep 2005 13:05:03 -0700, ARRRGH
wrote:

thanks for your reply.... I havnt had a chance to check out all the links yet
but i will...I've already created simple forms with fields but just to make
sure i understood you correctly the only way to create a custom dialog box in
word is through VBA.....If this is the case can you guide me to where i can
get more information about the programming codes used so I can learn to
create my own codes to suit my purposes??

Thanks again

"Charles Kenyon" wrote:

No, there is not. A UserForm is a vba construct, a custom dialog box.
However there are ASK fields, Fill-In fields, and On-Line Forms, none of
which require knowledge of vba.

Here is some general info on moving from Word Perfect to Word:

Word and Word Perfect work very differently from one another. Each program's
methods have strengths and weaknesses; but, if you try to use one of these
programs as if it were the other, it is like pushing on a string! You can
easily make a lot of extra work for yourself. If you are unwilling to take
the time to learn to use Word's methods, you should stick to using Word Pad.
You'll have a lot less grief, although you'll miss out on a lot of raw
power. In the (short) long term spending the time to learn Word will save
you time if you are spending any time at all (more than an hour a day) using
Word.

See http://www.addbalance.com/word/wordperfect.htm
http://www.mvps.org/word/FAQs/Genera...ordPerfect.htm
http://www.mvps.org/word/FAQs/Genera...AndGotchas.htm
http://www.mvps.org/word/FAQs/General/RevealCodes.htm
http://www.mvps.org/word/FAQs/Genera...Converters.htm
http://businesssoft.about.com/comput.../blconvert.htm
for information on Word for Word Perfect users.

For mo
http://www.mvps.org/word/FAQs/Custom...platePart2.htm
http://www.mvps.org/word/FAQs/Custom...platePart1.htm
http://www.addbalance.com/usersguide/templates.htm
http://www.mvps.org/word/FAQs/Number...gExplained.htm
http://www.addbalance.com/usersguide/styles.htm
http://www.mvps.org/word/FAQs/Custom...latesStore.htm


Function Keys

In Word 2000 (or later) You can get the function keys to display in a
special toolbar at the bottom of the screen if you want (something like
pressing F3 twice in WP). The following macro will do this.
Sub ShowMeFunctionKeys()
Commandbars("Function Key Display").Visible = True
End Sub

Word's Extend key (F8) gives something similar to block processing.


Formatting and Styles

Learn about Styles - really learn!
http://www.addbalance.com/usersguide/styles.htm I resisted for years and now
regret every day of those years because although that string was still very
hard to push, it kept getting longer and longer, and had some very important
projects tied to it! Once you understand styles and the Word concept of
organizing things into Chinese boxes everything falls into place and instead
of pushing a string, you can push a button that turns on the very powerful
text processing machine known as Microsoft Word and it will start doing your
work for you instead of running around behind you trying to undo what you
just thought you did.


Converting documents Word / Word Perfect

Some special characters in Word Perfect documents don't convert well to
Word. There is a macro to assist with this described at
http://www.columbia.edu/~em36/wpdos/...html#macroword and can be found
at http://www.columbia.edu/~em36/wpdos/WPSymbolConv.bas.
This was prepared by Edward Mendelson.
Otherwise, look at the macro from http://support.microsoft.com/?kbid=212396
Use these on _copies_!

As for converting documents from Word Perfect to _use_ in Word... In a word,
don't plan on it. I would not recommend using converted documents long-term.
They will be filled with formatting anomolies that will get you at the worst
time. This is especially true of any documents containing automatic
numbering or bullets. Try recreating form documents in Word using the
following process:
In Word Perfect (if you still have it, in Word if not) save your files as
text files.
Use your converted files as references to show you how you want your
formatting to look.
Create a new document in Word and insert the text from the text file. Save
this new document as a Word template. Format it the way you want using
styles, not direct formatting. Save it again.
To use a template within Word, use File = New and pick your template. This
will create a new document for you.

Merge documents have special problems and should be recreated from text
files or retyped in Word. To convert data files, consider generating labels
in WP as a document, converting that to Word, and then using
http://www.gmayor.com/convert_labels...mail_merge.htm to get a new Word
data file.

Note that conversions usually do create documents that look passable and
print OK; the problems I'm referring to have to do with editing / making
changes, that is, using the documents long-term. (See below on reusing
documents vs. using templates.)

Conversion back to Word Perfect: There is a problem (in addition to the ones
mentioned for conversion _to_ Word) with Version 2002 (XP) and later of
Word. The conversion file only works for conversion _to_ Word, not from Word
to Word Perfect! Earlier versions went both ways. To fix this, you need to
find the old conversion file WPFT532.CNV from a Word 97 or Word 2000
installation and copy it to your new installation, replacing the file of the
same name. Note, the change making the file one-way was done as a security
measure. While I don't know of any problems the old file causes, keep the
new installation's file somewhere as a backup just in case.


Boilerplate and Forms

In WP a lot of people use macros to hold chunks of text - boilerplate. In
Word this function is filled by Templates, AutoText and AutoCorrect, not
macros. Follow the links at
http://addbalance.com/word/wordwebre...s.htm#AutoText for more
information on these tools.

You can use FILLIN and ASK fields or UserForms to query the user. For more
about online forms, follow the links at
http://addbalance.com/word/wordwebresources.htm#Forms or
http://word.mvps.org/FAQs/Customizat...nTheBlanks.htm especially Dian
Chapman's series of articles. You may also want to look at
http://www.word.mvps.org/FAQs/TblsFl...nesInForms.htm.


Reusing Documents vs. Using templates

General practice in WP is to have a document and copy and edit it to create
a new document. This is not good practice in Word. In Word, construct a
good, tight, template for your documents and use that template when
constructing new documents. Among other things, this can avoid embarrassing
"metadata" (http://www.addbalance.com/usersguide/metadata.htm) and things
like surprise headers and footers from creeping into new documents.

It's a lot of reading, I know. It's OK to chunk it down and do a bit each
day, but I would recommend that you make it a top priority to do that bit
each day. In the (short) long run, it will save you both time and grief.
--

Charles Kenyon

Word New User FAQ & Web Directory: http://addbalance.com/word

Intermediate User's Guide to Microsoft Word (supplemented version of
Microsoft's Legal Users' Guide) http://addbalance.com/usersguide

See also the MVP FAQ: http://www.mvps.org/word which is awesome!
--------- --------- --------- --------- --------- ---------
This message is posted to a newsgroup. Please post replies
and questions to the newsgroup so that others can learn
from my ignorance and your wisdom.

"ARRRGH" wrote in message
...
Our comapny has just made the switch from Wordperfect to Word 2003. I've
done/created a basic memo tutorial ( I just cut and paste the program
code)
but was wondering if there was anyway to create the user forms without
knowing the programming language??

Thanks





 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
CPU Usage When Working with Templates you created KM1 Microsoft Word Help 3 May 21st 05 11:57 PM
CPU Usage While Creating or Modifying Your Own Template KM1 Microsoft Word Help 2 May 20th 05 04:41 PM
Moving templates to other computer GeorgeMar Microsoft Word Help 10 February 19th 05 04:59 AM
Bring custom toolbars with templates art Page Layout 2 January 21st 05 05:35 PM
Documenting the template formats Brian Bischof Page Layout 3 December 15th 04 01:57 PM


All times are GMT +1. The time now is 06:53 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2004-2021 Microsoft Office Word Forum - WordBanter.
The comments are property of their posters.