Home |
Search |
Today's Posts |
#1
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
I've set my default template/document in Word 2007 to single space for all
new documents. However, this doesn't seem to hold true when trying to do a mail merge with labels??!!?? I can't seem to find a way to change the default label document - if there is such an animal.... I want all my documents to be single spaced - labels, envelopes, letters etc. - I want it to be the default (don't want to manually change each and every document I create). If I choose to change to a different paragraph style, I will! I don't want MS to choose for me. Help!?!?! Thanks. :-) LT |
#2
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
Are you talking about line spacing or paragraph spacing. Possibly you have
the paragraph spacing in the Normal style set to have 12pts after it and because the elements of the address are in separate paragraphs, they appear to be double spaced. You may also be using the addressblock which has each element of the address in a separate paragraph. Instead of doing that, just insert the individual merge fields into the label in the configuration that you want them, separating each with a new line feed (Shift+Enter) rather than a carriage return if you want to retain the space between paragraphs in your Normal style. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "Icemaiden" wrote in message ... I've set my default template/document in Word 2007 to single space for all new documents. However, this doesn't seem to hold true when trying to do a mail merge with labels??!!?? I can't seem to find a way to change the default label document - if there is such an animal.... I want all my documents to be single spaced - labels, envelopes, letters etc. - I want it to be the default (don't want to manually change each and every document I create). If I choose to change to a different paragraph style, I will! I don't want MS to choose for me. Help!?!?! Thanks. :-) LT |
#3
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
Well, I changed my "normal" style to be single spaced a while ago so that
doesn't seem to be the solution and I don't use the address block for the merges, I put in each separate field. So what I'm hearing, is there is no way to set the default label document to be single spaced?! I have an office of 21 people that use Word merges with Access and I'd really like to be able to tell them how to configure their software to work correctly. Sometimes I really dislike Microsoft with their holier-than-thou decisions on what they think people should use. Office 2007 is a prime example! Thanks. LT "Doug Robbins - Word MVP" wrote: Are you talking about line spacing or paragraph spacing. Possibly you have the paragraph spacing in the Normal style set to have 12pts after it and because the elements of the address are in separate paragraphs, they appear to be double spaced. You may also be using the addressblock which has each element of the address in a separate paragraph. Instead of doing that, just insert the individual merge fields into the label in the configuration that you want them, separating each with a new line feed (Shift+Enter) rather than a carriage return if you want to retain the space between paragraphs in your Normal style. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "Icemaiden" wrote in message ... I've set my default template/document in Word 2007 to single space for all new documents. However, this doesn't seem to hold true when trying to do a mail merge with labels??!!?? I can't seem to find a way to change the default label document - if there is such an animal.... I want all my documents to be single spaced - labels, envelopes, letters etc. - I want it to be the default (don't want to manually change each and every document I create). If I choose to change to a different paragraph style, I will! I don't want MS to choose for me. Help!?!?! Thanks. :-) LT |
#4
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
You should modify your Normal style and set it back to the original defaults
since making changes to it can lead to other style issues, such as Table styles. Then, create a new document based on your Normal template, display the Styles task pane (press Ctrl+Alt+Shift+S), click Manage Styles at the bottom, select the Set Defaults tab, and make your changes there. Select the option, "New documents based on this template" The Normal style will then follow your defaults for all new documents. Unfortunately, this doesn't resolve the problem with merging labels.: -( From what I can ascertain, when the Word table is inserted to create the label structure, it's also adding space before each paragraph and a left and right indent. For example if using Avery 5160, 5.55 pts of space is added before each paragraph and 0.08" left and right indent. This is direct formatting and not added by your Normal style. I don't like this either and I suspect there will be several others who will also have issues with it. (I suspect this is a failed attempt at adding a bit of padding before the first paragraph.) Note that it appears as though this only applies to Labels and not the Letters when creating a merge. Letters will use whatever style, or direct formatting, you opt to use. What I'd recommend is to set up a template for each label definition you use for your merges. This can be accomplished by selecting the Merge document (labels) and then modifying the formats - you could select the table and then click "Clear Formatting" on the Home tab in the Font group. Place the template in a shared folder and point your users' Workgroup template folder to that location. Then instruct your users to use the appropriate template for their merge. Then all they would need to do is associated the data source although if that's the same each time then you could include that in your template as well which actually might save time in the long run. Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Icemaiden" wrote in message ... Well, I changed my "normal" style to be single spaced a while ago so that doesn't seem to be the solution and I don't use the address block for the merges, I put in each separate field. So what I'm hearing, is there is no way to set the default label document to be single spaced?! I have an office of 21 people that use Word merges with Access and I'd really like to be able to tell them how to configure their software to work correctly. Sometimes I really dislike Microsoft with their holier-than-thou decisions on what they think people should use. Office 2007 is a prime example! Thanks. LT "Doug Robbins - Word MVP" wrote: Are you talking about line spacing or paragraph spacing. Possibly you have the paragraph spacing in the Normal style set to have 12pts after it and because the elements of the address are in separate paragraphs, they appear to be double spaced. You may also be using the addressblock which has each element of the address in a separate paragraph. Instead of doing that, just insert the individual merge fields into the label in the configuration that you want them, separating each with a new line feed (Shift+Enter) rather than a carriage return if you want to retain the space between paragraphs in your Normal style. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "Icemaiden" wrote in message ... I've set my default template/document in Word 2007 to single space for all new documents. However, this doesn't seem to hold true when trying to do a mail merge with labels??!!?? I can't seem to find a way to change the default label document - if there is such an animal.... I want all my documents to be single spaced - labels, envelopes, letters etc. - I want it to be the default (don't want to manually change each and every document I create). If I choose to change to a different paragraph style, I will! I don't want MS to choose for me. Help!?!?! Thanks. :-) LT |
#5
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
It is nothing to do with single spacing, but with inter-paragarph spacing.
The default setting for normal style (used for labels) is to have 12 points of space after each paragraph and it is that that appears to show the double spacing on the labels (the address lines each being a paragraph). It seems odd that Microsoft swapped Normal style and the No spaced stype while leaving normal as the default style for labels. They would have been better creating a normal spaced style and left normal unspaced as in previous versions. You can make these changes if you wish as long as you remember to save them in normal.dot. If you don't like Microsoft products there are alternatives you can buy. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Well, I changed my "normal" style to be single spaced a while ago so that doesn't seem to be the solution and I don't use the address block for the merges, I put in each separate field. So what I'm hearing, is there is no way to set the default label document to be single spaced?! I have an office of 21 people that use Word merges with Access and I'd really like to be able to tell them how to configure their software to work correctly. Sometimes I really dislike Microsoft with their holier-than-thou decisions on what they think people should use. Office 2007 is a prime example! Thanks. LT "Doug Robbins - Word MVP" wrote: Are you talking about line spacing or paragraph spacing. Possibly you have the paragraph spacing in the Normal style set to have 12pts after it and because the elements of the address are in separate paragraphs, they appear to be double spaced. You may also be using the addressblock which has each element of the address in a separate paragraph. Instead of doing that, just insert the individual merge fields into the label in the configuration that you want them, separating each with a new line feed (Shift+Enter) rather than a carriage return if you want to retain the space between paragraphs in your Normal style. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "Icemaiden" wrote in message ... I've set my default template/document in Word 2007 to single space for all new documents. However, this doesn't seem to hold true when trying to do a mail merge with labels??!!?? I can't seem to find a way to change the default label document - if there is such an animal.... I want all my documents to be single spaced - labels, envelopes, letters etc. - I want it to be the default (don't want to manually change each and every document I create). If I choose to change to a different paragraph style, I will! I don't want MS to choose for me. Help!?!?! Thanks. :-) LT |
#6
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
Thanks for the reply. It is odd that they swapped out styles. I have
changed the normal.dot document and it still switches over to having 5.6 point before a line. Can't seem to change it and save it as a default. I'll have to recommend that people create a master template of their own and use that... I have no choice but to use MS Office at work. I also serve as "helpdesk" for 21 people in the dept. and it becomes frustrating when MS makes global decisions about how they feel businesses should format their documents and not provide a way of personalizing. Generally I like MS Office - I just don't like the inability to save my preferencial default settings. Thanks again. LT "Graham Mayor" wrote: It is nothing to do with single spacing, but with inter-paragarph spacing. The default setting for normal style (used for labels) is to have 12 points of space after each paragraph and it is that that appears to show the double spacing on the labels (the address lines each being a paragraph). It seems odd that Microsoft swapped Normal style and the No spaced stype while leaving normal as the default style for labels. They would have been better creating a normal spaced style and left normal unspaced as in previous versions. You can make these changes if you wish as long as you remember to save them in normal.dot. If you don't like Microsoft products there are alternatives you can buy. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Well, I changed my "normal" style to be single spaced a while ago so that doesn't seem to be the solution and I don't use the address block for the merges, I put in each separate field. So what I'm hearing, is there is no way to set the default label document to be single spaced?! I have an office of 21 people that use Word merges with Access and I'd really like to be able to tell them how to configure their software to work correctly. Sometimes I really dislike Microsoft with their holier-than-thou decisions on what they think people should use. Office 2007 is a prime example! Thanks. LT "Doug Robbins - Word MVP" wrote: Are you talking about line spacing or paragraph spacing. Possibly you have the paragraph spacing in the Normal style set to have 12pts after it and because the elements of the address are in separate paragraphs, they appear to be double spaced. You may also be using the addressblock which has each element of the address in a separate paragraph. Instead of doing that, just insert the individual merge fields into the label in the configuration that you want them, separating each with a new line feed (Shift+Enter) rather than a carriage return if you want to retain the space between paragraphs in your Normal style. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "Icemaiden" wrote in message ... I've set my default template/document in Word 2007 to single space for all new documents. However, this doesn't seem to hold true when trying to do a mail merge with labels??!!?? I can't seem to find a way to change the default label document - if there is such an animal.... I want all my documents to be single spaced - labels, envelopes, letters etc. - I want it to be the default (don't want to manually change each and every document I create). If I choose to change to a different paragraph style, I will! I don't want MS to choose for me. Help!?!?! Thanks. :-) LT |
#7
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
If you read my reply in this thread, you'll see that they added direct
formatting - they didn't change the style. I suspect the reason behind this is it's a failed attempt at adding some padding before the first line. Many users have problems with their printers placing the data too high on the labels which results in the tops of the characters being cut off. Of course I don't know for sure, but that would make sense. btw, templates are the best way to ensure your preferred settings are always saved -= especially in the corporate environment. One never knows when their profile will be dumped and they are back to the defaults once again. ;-) Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Icemaiden" wrote in message ... Thanks for the reply. It is odd that they swapped out styles. I have changed the normal.dot document and it still switches over to having 5.6 point before a line. Can't seem to change it and save it as a default. I'll have to recommend that people create a master template of their own and use that... I have no choice but to use MS Office at work. I also serve as "helpdesk" for 21 people in the dept. and it becomes frustrating when MS makes global decisions about how they feel businesses should format their documents and not provide a way of personalizing. Generally I like MS Office - I just don't like the inability to save my preferencial default settings. Thanks again. LT "Graham Mayor" wrote: It is nothing to do with single spacing, but with inter-paragarph spacing. The default setting for normal style (used for labels) is to have 12 points of space after each paragraph and it is that that appears to show the double spacing on the labels (the address lines each being a paragraph). It seems odd that Microsoft swapped Normal style and the No spaced stype while leaving normal as the default style for labels. They would have been better creating a normal spaced style and left normal unspaced as in previous versions. You can make these changes if you wish as long as you remember to save them in normal.dot. If you don't like Microsoft products there are alternatives you can buy. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Well, I changed my "normal" style to be single spaced a while ago so that doesn't seem to be the solution and I don't use the address block for the merges, I put in each separate field. So what I'm hearing, is there is no way to set the default label document to be single spaced?! I have an office of 21 people that use Word merges with Access and I'd really like to be able to tell them how to configure their software to work correctly. Sometimes I really dislike Microsoft with their holier-than-thou decisions on what they think people should use. Office 2007 is a prime example! Thanks. LT "Doug Robbins - Word MVP" wrote: Are you talking about line spacing or paragraph spacing. Possibly you have the paragraph spacing in the Normal style set to have 12pts after it and because the elements of the address are in separate paragraphs, they appear to be double spaced. You may also be using the addressblock which has each element of the address in a separate paragraph. Instead of doing that, just insert the individual merge fields into the label in the configuration that you want them, separating each with a new line feed (Shift+Enter) rather than a carriage return if you want to retain the space between paragraphs in your Normal style. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "Icemaiden" wrote in message ... I've set my default template/document in Word 2007 to single space for all new documents. However, this doesn't seem to hold true when trying to do a mail merge with labels??!!?? I can't seem to find a way to change the default label document - if there is such an animal.... I want all my documents to be single spaced - labels, envelopes, letters etc. - I want it to be the default (don't want to manually change each and every document I create). If I choose to change to a different paragraph style, I will! I don't want MS to choose for me. Help!?!?! Thanks. :-) LT |
#8
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
The normal template in Word 2007 will be normal.dotm (or dotx) rather than
normal.dot which was for earlier versions, and suggests that you are editing the wrong file. It is certainly possible to set the normal style to have no space before or after and thus have labels which match. Right click 'Normal' on the home tab. Choose 'Modify'. Remove spacing from the paragraph formatting options. Check the 'new documents based on this style' check box and when you close out of Word (plus Outlook if running) , save the normal template when prompted. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Thanks for the reply. It is odd that they swapped out styles. I have changed the normal.dot document and it still switches over to having 5.6 point before a line. Can't seem to change it and save it as a default. I'll have to recommend that people create a master template of their own and use that... I have no choice but to use MS Office at work. I also serve as "helpdesk" for 21 people in the dept. and it becomes frustrating when MS makes global decisions about how they feel businesses should format their documents and not provide a way of personalizing. Generally I like MS Office - I just don't like the inability to save my preferencial default settings. Thanks again. LT "Graham Mayor" wrote: It is nothing to do with single spacing, but with inter-paragarph spacing. The default setting for normal style (used for labels) is to have 12 points of space after each paragraph and it is that that appears to show the double spacing on the labels (the address lines each being a paragraph). It seems odd that Microsoft swapped Normal style and the No spaced stype while leaving normal as the default style for labels. They would have been better creating a normal spaced style and left normal unspaced as in previous versions. You can make these changes if you wish as long as you remember to save them in normal.dot. If you don't like Microsoft products there are alternatives you can buy. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Well, I changed my "normal" style to be single spaced a while ago so that doesn't seem to be the solution and I don't use the address block for the merges, I put in each separate field. So what I'm hearing, is there is no way to set the default label document to be single spaced?! I have an office of 21 people that use Word merges with Access and I'd really like to be able to tell them how to configure their software to work correctly. Sometimes I really dislike Microsoft with their holier-than-thou decisions on what they think people should use. Office 2007 is a prime example! Thanks. LT "Doug Robbins - Word MVP" wrote: Are you talking about line spacing or paragraph spacing. Possibly you have the paragraph spacing in the Normal style set to have 12pts after it and because the elements of the address are in separate paragraphs, they appear to be double spaced. You may also be using the addressblock which has each element of the address in a separate paragraph. Instead of doing that, just insert the individual merge fields into the label in the configuration that you want them, separating each with a new line feed (Shift+Enter) rather than a carriage return if you want to retain the space between paragraphs in your Normal style. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "Icemaiden" wrote in message ... I've set my default template/document in Word 2007 to single space for all new documents. However, this doesn't seem to hold true when trying to do a mail merge with labels??!!?? I can't seem to find a way to change the default label document - if there is such an animal.... I want all my documents to be single spaced - labels, envelopes, letters etc. - I want it to be the default (don't want to manually change each and every document I create). If I choose to change to a different paragraph style, I will! I don't want MS to choose for me. Help!?!?! Thanks. :-) LT |
#9
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
Have you actually tried this in Word 2007 and *mail merge* labels, Graham??
Regular labels are fine and they automatically use no spacing with no need to modify the defaults. It's when using mail merge this occurs. As soon as you select Labels as the main document type, space *before* each paragraph and single space are added as direct formatting. The new defaults use 10 pts space after (not 12) and 1.15 lines between. Additional Notes: - When using Outlook 2007, Word is irrelevant since Outlook no longer uses Winword.exe and does not use Normal.dotm. - If you want to avoid the issues with table styles, and other style nuances we experienced in past versions, then you should modify the Document Defaults and leave the Normal style unmodified. - The Normal template for Word 2007 is always Norma.dotm - never Normal.dotx. ~Beth Melton "Graham Mayor" wrote in message ... The normal template in Word 2007 will be normal.dotm (or dotx) rather than normal.dot which was for earlier versions, and suggests that you are editing the wrong file. It is certainly possible to set the normal style to have no space before or after and thus have labels which match. Right click 'Normal' on the home tab. Choose 'Modify'. Remove spacing from the paragraph formatting options. Check the 'new documents based on this style' check box and when you close out of Word (plus Outlook if running) , save the normal template when prompted. |
#10
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
OK - I see what you mean.
I had prepared my web page http://www.gmayor.com/merge_labels_with_word_2007.htm based on the default settings of Word 2007 and noted in it the problem with spacing of the addresses. I subsequently modified the normal style which is used as in previous versions as the default for tables and took it as read that it would apply also to tables created as part of mail merge - which as you point out it doesn't. Although the suggestions on my web page for dealing with the spacing remain valid, the reasons don't so I will have to re-address that over the weekend -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Have you actually tried this in Word 2007 and *mail merge* labels, Graham?? Regular labels are fine and they automatically use no spacing with no need to modify the defaults. It's when using mail merge this occurs. As soon as you select Labels as the main document type, space *before* each paragraph and single space are added as direct formatting. The new defaults use 10 pts space after (not 12) and 1.15 lines between. Additional Notes: - When using Outlook 2007, Word is irrelevant since Outlook no longer uses Winword.exe and does not use Normal.dotm. - If you want to avoid the issues with table styles, and other style nuances we experienced in past versions, then you should modify the Document Defaults and leave the Normal style unmodified. - The Normal template for Word 2007 is always Norma.dotm - never Normal.dotx. ~Beth Melton "Graham Mayor" wrote in message ... The normal template in Word 2007 will be normal.dotm (or dotx) rather than normal.dot which was for earlier versions, and suggests that you are editing the wrong file. It is certainly possible to set the normal style to have no space before or after and thus have labels which match. Right click 'Normal' on the home tab. Choose 'Modify'. Remove spacing from the paragraph formatting options. Check the 'new documents based on this style' check box and when you close out of Word (plus Outlook if running) , save the normal template when prompted. |
#11
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
Thanks you both, Beth and Graham, I was starting to think I was totally
missing something and was nuts. I will direct users to make a default template to use and maybe MS will add something in the future so this won't be necessary! :-) Thanks for your time! LT "Graham Mayor" wrote: OK - I see what you mean. I had prepared my web page http://www.gmayor.com/merge_labels_with_word_2007.htm based on the default settings of Word 2007 and noted in it the problem with spacing of the addresses. I subsequently modified the normal style which is used as in previous versions as the default for tables and took it as read that it would apply also to tables created as part of mail merge - which as you point out it doesn't. Although the suggestions on my web page for dealing with the spacing remain valid, the reasons don't so I will have to re-address that over the weekend -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Have you actually tried this in Word 2007 and *mail merge* labels, Graham?? Regular labels are fine and they automatically use no spacing with no need to modify the defaults. It's when using mail merge this occurs. As soon as you select Labels as the main document type, space *before* each paragraph and single space are added as direct formatting. The new defaults use 10 pts space after (not 12) and 1.15 lines between. Additional Notes: - When using Outlook 2007, Word is irrelevant since Outlook no longer uses Winword.exe and does not use Normal.dotm. - If you want to avoid the issues with table styles, and other style nuances we experienced in past versions, then you should modify the Document Defaults and leave the Normal style unmodified. - The Normal template for Word 2007 is always Norma.dotm - never Normal.dotx. ~Beth Melton "Graham Mayor" wrote in message ... The normal template in Word 2007 will be normal.dotm (or dotx) rather than normal.dot which was for earlier versions, and suggests that you are editing the wrong file. It is certainly possible to set the normal style to have no space before or after and thus have labels which match. Right click 'Normal' on the home tab. Choose 'Modify'. Remove spacing from the paragraph formatting options. Check the 'new documents based on this style' check box and when you close out of Word (plus Outlook if running) , save the normal template when prompted. |
#12
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
I made the changes to my web site yesterday, which you may find of
interest - All your users would have to do is save the formatted merge source document and attach the data file as required (assuming the same field names) http://www.gmayor.com/merge_labels_with_word_2007.htm -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Thanks you both, Beth and Graham, I was starting to think I was totally missing something and was nuts. I will direct users to make a default template to use and maybe MS will add something in the future so this won't be necessary! :-) Thanks for your time! LT "Graham Mayor" wrote: OK - I see what you mean. I had prepared my web page http://www.gmayor.com/merge_labels_with_word_2007.htm based on the default settings of Word 2007 and noted in it the problem with spacing of the addresses. I subsequently modified the normal style which is used as in previous versions as the default for tables and took it as read that it would apply also to tables created as part of mail merge - which as you point out it doesn't. Although the suggestions on my web page for dealing with the spacing remain valid, the reasons don't so I will have to re-address that over the weekend -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Have you actually tried this in Word 2007 and *mail merge* labels, Graham?? Regular labels are fine and they automatically use no spacing with no need to modify the defaults. It's when using mail merge this occurs. As soon as you select Labels as the main document type, space *before* each paragraph and single space are added as direct formatting. The new defaults use 10 pts space after (not 12) and 1.15 lines between. Additional Notes: - When using Outlook 2007, Word is irrelevant since Outlook no longer uses Winword.exe and does not use Normal.dotm. - If you want to avoid the issues with table styles, and other style nuances we experienced in past versions, then you should modify the Document Defaults and leave the Normal style unmodified. - The Normal template for Word 2007 is always Norma.dotm - never Normal.dotx. ~Beth Melton "Graham Mayor" wrote in message ... The normal template in Word 2007 will be normal.dotm (or dotx) rather than normal.dot which was for earlier versions, and suggests that you are editing the wrong file. It is certainly possible to set the normal style to have no space before or after and thus have labels which match. Right click 'Normal' on the home tab. Choose 'Modify'. Remove spacing from the paragraph formatting options. Check the 'new documents based on this style' check box and when you close out of Word (plus Outlook if running) , save the normal template when prompted. |
#13
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
Incidentally, as an illustration of how confused this function is, if you
start by adding a label layout to a document from the labels tool on the mailings tab, and then use Select Recipients to add the data source then Insert Merge field to insert the fields (rather than use the Start The Mail Merge) to start the merge and select the label format, the padding is not added. You would then have to go to the Start The Mail Merge Button, set the document type to labels and then cancel out of the label dialog to set the merge type as mailing labels. This doesn't then add the unwanted padding either. I suspect this is why I missed the padding issue in the first place as I have tended to carry over practices learned with earlier versions and as a matter of course I would start from the table format I wished to use. You could even add the document type selector to the QAT - it is in the tools 'not on the ribbon' and called 'Main Document Setup' -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Thanks you both, Beth and Graham, I was starting to think I was totally missing something and was nuts. I will direct users to make a default template to use and maybe MS will add something in the future so this won't be necessary! :-) Thanks for your time! LT "Graham Mayor" wrote: OK - I see what you mean. I had prepared my web page http://www.gmayor.com/merge_labels_with_word_2007.htm based on the default settings of Word 2007 and noted in it the problem with spacing of the addresses. I subsequently modified the normal style which is used as in previous versions as the default for tables and took it as read that it would apply also to tables created as part of mail merge - which as you point out it doesn't. Although the suggestions on my web page for dealing with the spacing remain valid, the reasons don't so I will have to re-address that over the weekend -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Have you actually tried this in Word 2007 and *mail merge* labels, Graham?? Regular labels are fine and they automatically use no spacing with no need to modify the defaults. It's when using mail merge this occurs. As soon as you select Labels as the main document type, space *before* each paragraph and single space are added as direct formatting. The new defaults use 10 pts space after (not 12) and 1.15 lines between. Additional Notes: - When using Outlook 2007, Word is irrelevant since Outlook no longer uses Winword.exe and does not use Normal.dotm. - If you want to avoid the issues with table styles, and other style nuances we experienced in past versions, then you should modify the Document Defaults and leave the Normal style unmodified. - The Normal template for Word 2007 is always Norma.dotm - never Normal.dotx. ~Beth Melton "Graham Mayor" wrote in message ... The normal template in Word 2007 will be normal.dotm (or dotx) rather than normal.dot which was for earlier versions, and suggests that you are editing the wrong file. It is certainly possible to set the normal style to have no space before or after and thus have labels which match. Right click 'Normal' on the home tab. Choose 'Modify'. Remove spacing from the paragraph formatting options. Check the 'new documents based on this style' check box and when you close out of Word (plus Outlook if running) , save the normal template when prompted. |
#14
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
Incidentally, there is still some misinformation on your page regarding Word
2007 labels. Do you happen to still be using a beta version? Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I made the changes to my web site yesterday, which you may find of interest - All your users would have to do is save the formatted merge source document and attach the data file as required (assuming the same field names) http://www.gmayor.com/merge_labels_with_word_2007.htm -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Thanks you both, Beth and Graham, I was starting to think I was totally missing something and was nuts. I will direct users to make a default template to use and maybe MS will add something in the future so this won't be necessary! :-) Thanks for your time! LT "Graham Mayor" wrote: OK - I see what you mean. I had prepared my web page http://www.gmayor.com/merge_labels_with_word_2007.htm based on the default settings of Word 2007 and noted in it the problem with spacing of the addresses. I subsequently modified the normal style which is used as in previous versions as the default for tables and took it as read that it would apply also to tables created as part of mail merge - which as you point out it doesn't. Although the suggestions on my web page for dealing with the spacing remain valid, the reasons don't so I will have to re-address that over the weekend -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Have you actually tried this in Word 2007 and *mail merge* labels, Graham?? Regular labels are fine and they automatically use no spacing with no need to modify the defaults. It's when using mail merge this occurs. As soon as you select Labels as the main document type, space *before* each paragraph and single space are added as direct formatting. The new defaults use 10 pts space after (not 12) and 1.15 lines between. Additional Notes: - When using Outlook 2007, Word is irrelevant since Outlook no longer uses Winword.exe and does not use Normal.dotm. - If you want to avoid the issues with table styles, and other style nuances we experienced in past versions, then you should modify the Document Defaults and leave the Normal style unmodified. - The Normal template for Word 2007 is always Norma.dotm - never Normal.dotx. ~Beth Melton "Graham Mayor" wrote in message ... The normal template in Word 2007 will be normal.dotm (or dotx) rather than normal.dot which was for earlier versions, and suggests that you are editing the wrong file. It is certainly possible to set the normal style to have no space before or after and thus have labels which match. Right click 'Normal' on the home tab. Choose 'Modify'. Remove spacing from the paragraph formatting options. Check the 'new documents based on this style' check box and when you close out of Word (plus Outlook if running) , save the normal template when prompted. |
#15
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
I guess I don't see this as confusing. The extra padding is a function of
the Label Options dialog box when used with Mail Merge. If you don't use the dialog box to create the label definition then the padding will not be added. If you use the dialog box then the padding will be added since the procedure for creating the label definition occurs when you click OK in the Label Options dialog box. As a matter of fact, I think mail merge in Word 2007 is the least confusing so far. The Mailings tab categorizes each primary process for mail merge into groups on the tab: Start Mail Merge, Write & Insert Fields, Preview Results, and Finish. I think it's even more straightforward than the old Mail Merge Helper. This was good but it didn't include the process for inserting the mail merge fields. Once the dialog box closed you needed to know to use the mail merge toolbar and find the command to insert the fields. If you follow the commands on the Mailings tab for mail merge from left to right, each step is presented to you. Perhaps this is an example of how trying to continue to implement old methods will make things more confusing in the new version? Regarding adding the "Main Document Setup" command to the QAT, how does this work any different than using the Start Mail Merge command on the Mailings tab? The extra space is still added since it appears to be calling the same routine as the Start Mail Merge command. Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... Incidentally, as an illustration of how confused this function is, if you start by adding a label layout to a document from the labels tool on the mailings tab, and then use Select Recipients to add the data source then Insert Merge field to insert the fields (rather than use the Start The Mail Merge) to start the merge and select the label format, the padding is not added. You would then have to go to the Start The Mail Merge Button, set the document type to labels and then cancel out of the label dialog to set the merge type as mailing labels. This doesn't then add the unwanted padding either. I suspect this is why I missed the padding issue in the first place as I have tended to carry over practices learned with earlier versions and as a matter of course I would start from the table format I wished to use. You could even add the document type selector to the QAT - it is in the tools 'not on the ribbon' and called 'Main Document Setup' |
#16
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
Beth Melton wrote:
I guess I don't see this as confusing. The extra padding is a function of the Label Options dialog box when used with Mail Merge. If you don't use the dialog box to create the label definition then the padding will not be added. If you use the dialog box then the padding will be added since the procedure for creating the label definition occurs when you click OK in the Label Options dialog box. Agreed, but lots of people want to use templates to create label merges. What is confusing is that the padding is only added when you start the merge from the Start Mail Merge tool and not when you start from a document and change the document type subsequently, either using the Start Mail Merge or the similar tool which can be added to the QAT. As a matter of fact, I think mail merge in Word 2007 is the least confusing so far. The Mailings tab categorizes each primary process for mail merge into groups on the tab: Start Mail Merge, Write & Insert Fields, Preview Results, and Finish. I think it's even more straightforward than the old Mail Merge Helper. This was good but it didn't include the process for inserting the mail merge fields. Once the dialog box closed you needed to know to use the mail merge toolbar and find the command to insert the fields. If you follow the commands on the Mailings tab for mail merge from left to right, each step is presented to you. Perhaps this is an example of how trying to continue to implement old methods will make things more confusing in the new version? I have no argument there either, the comments concerned primarily the addition of the padding, which I had missed as attributable to the new label merge function (but which is not an inherent part of labels nor of merge generally). Even the dreadful AddressBlock field now works properly most of the time. Regarding adding the "Main Document Setup" command to the QAT, how does this work any different than using the Start Mail Merge command on the Mailings tab? The extra space is still added since it appears to be calling the same routine as the Start Mail Merge command. It doesn't work differently - but the space is not added if you merely change the document type (of an already loaded template) to labels and then continue the merge process. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org |
#17
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
I don't intentionally post misleading information on my web site, so OK,
I'll bite. What is wrong with the information as it now stands? I have checked my comments using Word 2007 in its safe mode, but I will concede that it is possible to get so close to a project that you miss things or misinterpret things that others see. I have added a paragraph at the start of the page as it would appear that I am advocating sticking to ancient ways, whereas my intention was to show that they were still available. I have also added a hyperlink to allow readers to jump over the following section. I am not using nor ever have used the beta version? -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Incidentally, there is still some misinformation on your page regarding Word 2007 labels. Do you happen to still be using a beta version? Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I made the changes to my web site yesterday, which you may find of interest - All your users would have to do is save the formatted merge source document and attach the data file as required (assuming the same field names) http://www.gmayor.com/merge_labels_with_word_2007.htm -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Thanks you both, Beth and Graham, I was starting to think I was totally missing something and was nuts. I will direct users to make a default template to use and maybe MS will add something in the future so this won't be necessary! :-) Thanks for your time! LT "Graham Mayor" wrote: OK - I see what you mean. I had prepared my web page http://www.gmayor.com/merge_labels_with_word_2007.htm based on the default settings of Word 2007 and noted in it the problem with spacing of the addresses. I subsequently modified the normal style which is used as in previous versions as the default for tables and took it as read that it would apply also to tables created as part of mail merge - which as you point out it doesn't. Although the suggestions on my web page for dealing with the spacing remain valid, the reasons don't so I will have to re-address that over the weekend -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Have you actually tried this in Word 2007 and *mail merge* labels, Graham?? Regular labels are fine and they automatically use no spacing with no need to modify the defaults. It's when using mail merge this occurs. As soon as you select Labels as the main document type, space *before* each paragraph and single space are added as direct formatting. The new defaults use 10 pts space after (not 12) and 1.15 lines between. Additional Notes: - When using Outlook 2007, Word is irrelevant since Outlook no longer uses Winword.exe and does not use Normal.dotm. - If you want to avoid the issues with table styles, and other style nuances we experienced in past versions, then you should modify the Document Defaults and leave the Normal style unmodified. - The Normal template for Word 2007 is always Norma.dotm - never Normal.dotx. ~Beth Melton "Graham Mayor" wrote in message ... The normal template in Word 2007 will be normal.dotm (or dotx) rather than normal.dot which was for earlier versions, and suggests that you are editing the wrong file. It is certainly possible to set the normal style to have no space before or after and thus have labels which match. Right click 'Normal' on the home tab. Choose 'Modify'. Remove spacing from the paragraph formatting options. Check the 'new documents based on this style' check box and when you close out of Word (plus Outlook if running) , save the normal template when prompted. |
#18
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
"Graham Mayor" wrote in message
... Beth Melton wrote: Regarding adding the "Main Document Setup" command to the QAT, how does this work any different than using the Start Mail Merge command on the Mailings tab? The extra space is still added since it appears to be calling the same routine as the Start Mail Merge command. It doesn't work differently - but the space is not added if you merely change the document type (of an already loaded template) to labels and then continue the merge process. If I start with my own labels and use the Main Document Setup command to change the label type the space is still added. Are you not seeing the same thing? -- Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ |
#19
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
Beth Melton wrote:
"Graham Mayor" wrote in message ... Beth Melton wrote: Regarding adding the "Main Document Setup" command to the QAT, how does this work any different than using the Start Mail Merge command on the Mailings tab? The extra space is still added since it appears to be calling the same routine as the Start Mail Merge command. It doesn't work differently - but the space is not added if you merely change the document type (of an already loaded template) to labels and then continue the merge process. If I start with my own labels and use the Main Document Setup command to change the label type the space is still added. Are you not seeing the same thing? Not if you have already attached the data source. Start with a label format on screen (either from a template or from the new document feature of the Label tool under Mailings). Attach the data source (Select Recipients). Whether you now add the fields or change the document type to 'labels' the space is not added. It is only added if you choose the document type before you apply the data source. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org |
#20
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
"Graham Mayor" wrote in message
... Beth Melton wrote: "Graham Mayor" wrote in message ... Beth Melton wrote: Regarding adding the "Main Document Setup" command to the QAT, how does this work any different than using the Start Mail Merge command on the Mailings tab? The extra space is still added since it appears to be calling the same routine as the Start Mail Merge command. It doesn't work differently - but the space is not added if you merely change the document type (of an already loaded template) to labels and then continue the merge process. If I start with my own labels and use the Main Document Setup command to change the label type the space is still added. Are you not seeing the same thing? Not if you have already attached the data source. Start with a label format on screen (either from a template or from the new document feature of the Label tool under Mailings). Attach the data source (Select Recipients). Whether you now add the fields or change the document type to 'labels' the space is not added. It is only added if you choose the document type before you apply the data source. I've tried various methods attempting to figure out what you are seeing but in each scenario, even if I keep the same label type, when I change the type to labels the space is still added. -- Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ |
#21
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
I pointed this out to you in my previous reply regarding the behavior of
lables in Word 2007 but I'll mention it again. ;-) On your page you have this note: "Microsoft appears to have retained the default use of the 'normal' paragraph style to format tables; however, in Word 2007, the normal paragraph style has added spacing. This will result in extra spacing between the lines of the addresses on the labels when created using the label tool..." Technically this statement is incorrect. By default, Word 2007 does not add any additional spacing, not between paragraphs or line spacing, on labels you create using the Labels command on the Mailings tab. Now, if *you* modify your Normal style and add extra spacing then in this scenario that spacing will also be added to the labels. I suspect this is why you are seeing this behavior. Note that one of the beta versions did include the additional space but due to feedback they received this behavior was changed in RTM. Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I don't intentionally post misleading information on my web site, so OK, I'll bite. What is wrong with the information as it now stands? I have checked my comments using Word 2007 in its safe mode, but I will concede that it is possible to get so close to a project that you miss things or misinterpret things that others see. I have added a paragraph at the start of the page as it would appear that I am advocating sticking to ancient ways, whereas my intention was to show that they were still available. I have also added a hyperlink to allow readers to jump over the following section. I am not using nor ever have used the beta version? -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Incidentally, there is still some misinformation on your page regarding Word 2007 labels. Do you happen to still be using a beta version? Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I made the changes to my web site yesterday, which you may find of interest - All your users would have to do is save the formatted merge source document and attach the data file as required (assuming the same field names) http://www.gmayor.com/merge_labels_with_word_2007.htm -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Thanks you both, Beth and Graham, I was starting to think I was totally missing something and was nuts. I will direct users to make a default template to use and maybe MS will add something in the future so this won't be necessary! :-) Thanks for your time! LT "Graham Mayor" wrote: OK - I see what you mean. I had prepared my web page http://www.gmayor.com/merge_labels_with_word_2007.htm based on the default settings of Word 2007 and noted in it the problem with spacing of the addresses. I subsequently modified the normal style which is used as in previous versions as the default for tables and took it as read that it would apply also to tables created as part of mail merge - which as you point out it doesn't. Although the suggestions on my web page for dealing with the spacing remain valid, the reasons don't so I will have to re-address that over the weekend -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Have you actually tried this in Word 2007 and *mail merge* labels, Graham?? Regular labels are fine and they automatically use no spacing with no need to modify the defaults. It's when using mail merge this occurs. As soon as you select Labels as the main document type, space *before* each paragraph and single space are added as direct formatting. The new defaults use 10 pts space after (not 12) and 1.15 lines between. Additional Notes: - When using Outlook 2007, Word is irrelevant since Outlook no longer uses Winword.exe and does not use Normal.dotm. - If you want to avoid the issues with table styles, and other style nuances we experienced in past versions, then you should modify the Document Defaults and leave the Normal style unmodified. - The Normal template for Word 2007 is always Norma.dotm - never Normal.dotx. ~Beth Melton "Graham Mayor" wrote in message ... The normal template in Word 2007 will be normal.dotm (or dotx) rather than normal.dot which was for earlier versions, and suggests that you are editing the wrong file. It is certainly possible to set the normal style to have no space before or after and thus have labels which match. Right click 'Normal' on the home tab. Choose 'Modify'. Remove spacing from the paragraph formatting options. Check the 'new documents based on this style' check box and when you close out of Word (plus Outlook if running) , save the normal template when prompted. |
#22
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
This is not the behaviour I see here - at least not consistently
Here the default setting for the Normal paragraph style is to have 10 points of space after, and multiple line spacing is set to 1.15. There is another style in the default set called 'No Spacing' which is what I would have expected 'Normal. to be. Normal style is used by default in tables - and this isn't a beta copy of Word (I skipped the beta process entirely) and is tested for the purpose of clarification in its safe mode - so tables have added space. However there is some additional behaviour going on here, which seems a tad hit and miss. Sometimes when you insert and address into the labels tool window, the address is posted into the label (new document) with added space and then it is reformatted to remove the extra padding. Other times it doesn't do that and the spacing remains. It all seems a tad flaky to me. I will however return to that disputed paragraph and make some change based on what I find. Removing the space from the normal style and creating a new style with the spacing (I renamed the No Spacing style after I added the spacing to it) removes the anomaly, and as this was how Word was setup through its recent versions, I fail to see why they changed it to complicate matters. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: I pointed this out to you in my previous reply regarding the behavior of lables in Word 2007 but I'll mention it again. ;-) On your page you have this note: "Microsoft appears to have retained the default use of the 'normal' paragraph style to format tables; however, in Word 2007, the normal paragraph style has added spacing. This will result in extra spacing between the lines of the addresses on the labels when created using the label tool..." Technically this statement is incorrect. By default, Word 2007 does not add any additional spacing, not between paragraphs or line spacing, on labels you create using the Labels command on the Mailings tab. Now, if *you* modify your Normal style and add extra spacing then in this scenario that spacing will also be added to the labels. I suspect this is why you are seeing this behavior. Note that one of the beta versions did include the additional space but due to feedback they received this behavior was changed in RTM. Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I don't intentionally post misleading information on my web site, so OK, I'll bite. What is wrong with the information as it now stands? I have checked my comments using Word 2007 in its safe mode, but I will concede that it is possible to get so close to a project that you miss things or misinterpret things that others see. I have added a paragraph at the start of the page as it would appear that I am advocating sticking to ancient ways, whereas my intention was to show that they were still available. I have also added a hyperlink to allow readers to jump over the following section. I am not using nor ever have used the beta version? -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Incidentally, there is still some misinformation on your page regarding Word 2007 labels. Do you happen to still be using a beta version? Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I made the changes to my web site yesterday, which you may find of interest - All your users would have to do is save the formatted merge source document and attach the data file as required (assuming the same field names) http://www.gmayor.com/merge_labels_with_word_2007.htm -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Thanks you both, Beth and Graham, I was starting to think I was totally missing something and was nuts. I will direct users to make a default template to use and maybe MS will add something in the future so this won't be necessary! :-) Thanks for your time! LT "Graham Mayor" wrote: OK - I see what you mean. I had prepared my web page http://www.gmayor.com/merge_labels_with_word_2007.htm based on the default settings of Word 2007 and noted in it the problem with spacing of the addresses. I subsequently modified the normal style which is used as in previous versions as the default for tables and took it as read that it would apply also to tables created as part of mail merge - which as you point out it doesn't. Although the suggestions on my web page for dealing with the spacing remain valid, the reasons don't so I will have to re-address that over the weekend -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Have you actually tried this in Word 2007 and *mail merge* labels, Graham?? Regular labels are fine and they automatically use no spacing with no need to modify the defaults. It's when using mail merge this occurs. As soon as you select Labels as the main document type, space *before* each paragraph and single space are added as direct formatting. The new defaults use 10 pts space after (not 12) and 1.15 lines between. Additional Notes: - When using Outlook 2007, Word is irrelevant since Outlook no longer uses Winword.exe and does not use Normal.dotm. - If you want to avoid the issues with table styles, and other style nuances we experienced in past versions, then you should modify the Document Defaults and leave the Normal style unmodified. - The Normal template for Word 2007 is always Norma.dotm - never Normal.dotx. ~Beth Melton "Graham Mayor" wrote in message ... The normal template in Word 2007 will be normal.dotm (or dotx) rather than normal.dot which was for earlier versions, and suggests that you are editing the wrong file. It is certainly possible to set the normal style to have no space before or after and thus have labels which match. Right click 'Normal' on the home tab. Choose 'Modify'. Remove spacing from the paragraph formatting options. Check the 'new documents based on this style' check box and when you close out of Word (plus Outlook if running) , save the normal template when prompted. |
#23
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
I have now re-written the offending paragraph -
http://www.gmayor.com/merge_labels_w...2007.htm#Note: which should now cover what is supposed to happen and what I see happening -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Graham Mayor wrote: This is not the behaviour I see here - at least not consistently Here the default setting for the Normal paragraph style is to have 10 points of space after, and multiple line spacing is set to 1.15. There is another style in the default set called 'No Spacing' which is what I would have expected 'Normal. to be. Normal style is used by default in tables - and this isn't a beta copy of Word (I skipped the beta process entirely) and is tested for the purpose of clarification in its safe mode - so tables have added space. However there is some additional behaviour going on here, which seems a tad hit and miss. Sometimes when you insert and address into the labels tool window, the address is posted into the label (new document) with added space and then it is reformatted to remove the extra padding. Other times it doesn't do that and the spacing remains. It all seems a tad flaky to me. I will however return to that disputed paragraph and make some change based on what I find. Removing the space from the normal style and creating a new style with the spacing (I renamed the No Spacing style after I added the spacing to it) removes the anomaly, and as this was how Word was setup through its recent versions, I fail to see why they changed it to complicate matters. Beth Melton wrote: I pointed this out to you in my previous reply regarding the behavior of lables in Word 2007 but I'll mention it again. ;-) On your page you have this note: "Microsoft appears to have retained the default use of the 'normal' paragraph style to format tables; however, in Word 2007, the normal paragraph style has added spacing. This will result in extra spacing between the lines of the addresses on the labels when created using the label tool..." Technically this statement is incorrect. By default, Word 2007 does not add any additional spacing, not between paragraphs or line spacing, on labels you create using the Labels command on the Mailings tab. Now, if *you* modify your Normal style and add extra spacing then in this scenario that spacing will also be added to the labels. I suspect this is why you are seeing this behavior. Note that one of the beta versions did include the additional space but due to feedback they received this behavior was changed in RTM. Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I don't intentionally post misleading information on my web site, so OK, I'll bite. What is wrong with the information as it now stands? I have checked my comments using Word 2007 in its safe mode, but I will concede that it is possible to get so close to a project that you miss things or misinterpret things that others see. I have added a paragraph at the start of the page as it would appear that I am advocating sticking to ancient ways, whereas my intention was to show that they were still available. I have also added a hyperlink to allow readers to jump over the following section. I am not using nor ever have used the beta version? -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Incidentally, there is still some misinformation on your page regarding Word 2007 labels. Do you happen to still be using a beta version? Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I made the changes to my web site yesterday, which you may find of interest - All your users would have to do is save the formatted merge source document and attach the data file as required (assuming the same field names) http://www.gmayor.com/merge_labels_with_word_2007.htm -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Thanks you both, Beth and Graham, I was starting to think I was totally missing something and was nuts. I will direct users to make a default template to use and maybe MS will add something in the future so this won't be necessary! :-) Thanks for your time! LT "Graham Mayor" wrote: OK - I see what you mean. I had prepared my web page http://www.gmayor.com/merge_labels_with_word_2007.htm based on the default settings of Word 2007 and noted in it the problem with spacing of the addresses. I subsequently modified the normal style which is used as in previous versions as the default for tables and took it as read that it would apply also to tables created as part of mail merge - which as you point out it doesn't. Although the suggestions on my web page for dealing with the spacing remain valid, the reasons don't so I will have to re-address that over the weekend -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Have you actually tried this in Word 2007 and *mail merge* labels, Graham?? Regular labels are fine and they automatically use no spacing with no need to modify the defaults. It's when using mail merge this occurs. As soon as you select Labels as the main document type, space *before* each paragraph and single space are added as direct formatting. The new defaults use 10 pts space after (not 12) and 1.15 lines between. Additional Notes: - When using Outlook 2007, Word is irrelevant since Outlook no longer uses Winword.exe and does not use Normal.dotm. - If you want to avoid the issues with table styles, and other style nuances we experienced in past versions, then you should modify the Document Defaults and leave the Normal style unmodified. - The Normal template for Word 2007 is always Norma.dotm - never Normal.dotx. ~Beth Melton "Graham Mayor" wrote in message ... The normal template in Word 2007 will be normal.dotm (or dotx) rather than normal.dot which was for earlier versions, and suggests that you are editing the wrong file. It is certainly possible to set the normal style to have no space before or after and thus have labels which match. Right click 'Normal' on the home tab. Choose 'Modify'. Remove spacing from the paragraph formatting options. Check the 'new documents based on this style' check box and when you close out of Word (plus Outlook if running) , save the normal template when prompted. |
#24
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
1. Hold down the CTRL key to start Word in its safe mode (thus eliminating
outside issues) 2. Open a new blank document, because safe mode doesn't open any document space. 3. From the Labels button pick a label from Options (I am using 5264 from Avery Letter for this experiment) 4 Create a new document from the labels tool (this will give you a new document and is essentially the same as starting from a label template). 5. On the Mailings Tab click Select Recipients and pick Select From Outlook Contacts 6. Pick an available contacts list 7. Click Start Merge and choose 'labels'. 8. Cancel the label dialog - we already have the label selected and this will make available the mailing label functions. 9. Use the Insert Mergefield Button to add fields to your first label (the tiny arrow at the button will allow you to insert the fields one at a time. Press enter after each row of fields. The fields now have no padding. 10. Click Update Labels - this propagates the first label content to the others and adds Next record fields as appropriate. (still no padding added). 11. Click 'Finish and Merge' and choose the option to Edit Individual Documents. This merges to a new document. Still no padding. While this process does not follow the logical progression left to right along the Mailings tab of the ribbon as you would if creating labels from resident templates, it would be a logical process if the merge is to start from a label template eg one downloaded from Avery or created yourself for a specific purpose. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: "Graham Mayor" wrote in message ... Beth Melton wrote: "Graham Mayor" wrote in message ... Beth Melton wrote: Regarding adding the "Main Document Setup" command to the QAT, how does this work any different than using the Start Mail Merge command on the Mailings tab? The extra space is still added since it appears to be calling the same routine as the Start Mail Merge command. It doesn't work differently - but the space is not added if you merely change the document type (of an already loaded template) to labels and then continue the merge process. If I start with my own labels and use the Main Document Setup command to change the label type the space is still added. Are you not seeing the same thing? Not if you have already attached the data source. Start with a label format on screen (either from a template or from the new document feature of the Label tool under Mailings). Attach the data source (Select Recipients). Whether you now add the fields or change the document type to 'labels' the space is not added. It is only added if you choose the document type before you apply the data source. I've tried various methods attempting to figure out what you are seeing but in each scenario, even if I keep the same label type, when I change the type to labels the space is still added. |
#25
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
Okay, I see what the difference is now, you are cancelling the Label Options
dialog box which, as we previously discussed, doesn't execute the procedure that adds the extra spacing. Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... 1. Hold down the CTRL key to start Word in its safe mode (thus eliminating outside issues) 2. Open a new blank document, because safe mode doesn't open any document space. 3. From the Labels button pick a label from Options (I am using 5264 from Avery Letter for this experiment) 4 Create a new document from the labels tool (this will give you a new document and is essentially the same as starting from a label template). 5. On the Mailings Tab click Select Recipients and pick Select From Outlook Contacts 6. Pick an available contacts list 7. Click Start Merge and choose 'labels'. 8. Cancel the label dialog - we already have the label selected and this will make available the mailing label functions. 9. Use the Insert Mergefield Button to add fields to your first label (the tiny arrow at the button will allow you to insert the fields one at a time. Press enter after each row of fields. The fields now have no padding. 10. Click Update Labels - this propagates the first label content to the others and adds Next record fields as appropriate. (still no padding added). 11. Click 'Finish and Merge' and choose the option to Edit Individual Documents. This merges to a new document. Still no padding. While this process does not follow the logical progression left to right along the Mailings tab of the ribbon as you would if creating labels from resident templates, it would be a logical process if the merge is to start from a label template eg one downloaded from Avery or created yourself for a specific purpose. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: "Graham Mayor" wrote in message ... Beth Melton wrote: "Graham Mayor" wrote in message ... Beth Melton wrote: Regarding adding the "Main Document Setup" command to the QAT, how does this work any different than using the Start Mail Merge command on the Mailings tab? The extra space is still added since it appears to be calling the same routine as the Start Mail Merge command. It doesn't work differently - but the space is not added if you merely change the document type (of an already loaded template) to labels and then continue the merge process. If I start with my own labels and use the Main Document Setup command to change the label type the space is still added. Are you not seeing the same thing? Not if you have already attached the data source. Start with a label format on screen (either from a template or from the new document feature of the Label tool under Mailings). Attach the data source (Select Recipients). Whether you now add the fields or change the document type to 'labels' the space is not added. It is only added if you choose the document type before you apply the data source. I've tried various methods attempting to figure out what you are seeing but in each scenario, even if I keep the same label type, when I change the type to labels the space is still added. |
#26
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
Now, the note wasn't offending. ;-)
This is one of those areas I fought hard for during the beta. Originally, the new default spacing infiltrated *everything*. Labels, envelopes, you name it. Thankfully Microsoft did listen to the feedback and changed the behaviors. I suspect there were a few areas that were missed (I'm still wondering what happened to labels when you use mail merge...) but as a whole I'm happy with the changes they made. I suspect that's why I wanted to see the corrections made to your page since it is a 'win' for user feedback. :-) Also, as for changing everything back to the way it was, instead of modifying styles and such, you can simply switch to the Word 2003 style set. This is available under Change Styles/Style Sets. After you select "Word 2003" in the Style Set list, if you want to use it as your default then click the Change Styles button again and then click "Set as Default". Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I have now re-written the offending paragraph - http://www.gmayor.com/merge_labels_w...2007.htm#Note: which should now cover what is supposed to happen and what I see happening -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Graham Mayor wrote: This is not the behaviour I see here - at least not consistently Here the default setting for the Normal paragraph style is to have 10 points of space after, and multiple line spacing is set to 1.15. There is another style in the default set called 'No Spacing' which is what I would have expected 'Normal. to be. Normal style is used by default in tables - and this isn't a beta copy of Word (I skipped the beta process entirely) and is tested for the purpose of clarification in its safe mode - so tables have added space. However there is some additional behaviour going on here, which seems a tad hit and miss. Sometimes when you insert and address into the labels tool window, the address is posted into the label (new document) with added space and then it is reformatted to remove the extra padding. Other times it doesn't do that and the spacing remains. It all seems a tad flaky to me. I will however return to that disputed paragraph and make some change based on what I find. Removing the space from the normal style and creating a new style with the spacing (I renamed the No Spacing style after I added the spacing to it) removes the anomaly, and as this was how Word was setup through its recent versions, I fail to see why they changed it to complicate matters. Beth Melton wrote: I pointed this out to you in my previous reply regarding the behavior of lables in Word 2007 but I'll mention it again. ;-) On your page you have this note: "Microsoft appears to have retained the default use of the 'normal' paragraph style to format tables; however, in Word 2007, the normal paragraph style has added spacing. This will result in extra spacing between the lines of the addresses on the labels when created using the label tool..." Technically this statement is incorrect. By default, Word 2007 does not add any additional spacing, not between paragraphs or line spacing, on labels you create using the Labels command on the Mailings tab. Now, if *you* modify your Normal style and add extra spacing then in this scenario that spacing will also be added to the labels. I suspect this is why you are seeing this behavior. Note that one of the beta versions did include the additional space but due to feedback they received this behavior was changed in RTM. Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I don't intentionally post misleading information on my web site, so OK, I'll bite. What is wrong with the information as it now stands? I have checked my comments using Word 2007 in its safe mode, but I will concede that it is possible to get so close to a project that you miss things or misinterpret things that others see. I have added a paragraph at the start of the page as it would appear that I am advocating sticking to ancient ways, whereas my intention was to show that they were still available. I have also added a hyperlink to allow readers to jump over the following section. I am not using nor ever have used the beta version? -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Incidentally, there is still some misinformation on your page regarding Word 2007 labels. Do you happen to still be using a beta version? Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I made the changes to my web site yesterday, which you may find of interest - All your users would have to do is save the formatted merge source document and attach the data file as required (assuming the same field names) http://www.gmayor.com/merge_labels_with_word_2007.htm -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Thanks you both, Beth and Graham, I was starting to think I was totally missing something and was nuts. I will direct users to make a default template to use and maybe MS will add something in the future so this won't be necessary! :-) Thanks for your time! LT "Graham Mayor" wrote: OK - I see what you mean. I had prepared my web page http://www.gmayor.com/merge_labels_with_word_2007.htm based on the default settings of Word 2007 and noted in it the problem with spacing of the addresses. I subsequently modified the normal style which is used as in previous versions as the default for tables and took it as read that it would apply also to tables created as part of mail merge - which as you point out it doesn't. Although the suggestions on my web page for dealing with the spacing remain valid, the reasons don't so I will have to re-address that over the weekend -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Have you actually tried this in Word 2007 and *mail merge* labels, Graham?? Regular labels are fine and they automatically use no spacing with no need to modify the defaults. It's when using mail merge this occurs. As soon as you select Labels as the main document type, space *before* each paragraph and single space are added as direct formatting. The new defaults use 10 pts space after (not 12) and 1.15 lines between. Additional Notes: - When using Outlook 2007, Word is irrelevant since Outlook no longer uses Winword.exe and does not use Normal.dotm. - If you want to avoid the issues with table styles, and other style nuances we experienced in past versions, then you should modify the Document Defaults and leave the Normal style unmodified. - The Normal template for Word 2007 is always Norma.dotm - never Normal.dotx. ~Beth Melton "Graham Mayor" wrote in message ... The normal template in Word 2007 will be normal.dotm (or dotx) rather than normal.dot which was for earlier versions, and suggests that you are editing the wrong file. It is certainly possible to set the normal style to have no space before or after and thus have labels which match. Right click 'Normal' on the home tab. Choose 'Modify'. Remove spacing from the paragraph formatting options. Check the 'new documents based on this style' check box and when you close out of Word (plus Outlook if running) , save the normal template when prompted. |
#27
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
I take your point about style sets, and maybe that needs another note, but I
was working from the basis that the user had default settings (something not many of us have for very long). Either way, the end result is really all that matters and I think the page will end up with the user having the required results for his/her purpose. Certainly the page has had a lot of hits since I posted it and I have had no feedback from the site to suggest that users are having problems with it...... yet -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Now, the note wasn't offending. ;-) This is one of those areas I fought hard for during the beta. Originally, the new default spacing infiltrated *everything*. Labels, envelopes, you name it. Thankfully Microsoft did listen to the feedback and changed the behaviors. I suspect there were a few areas that were missed (I'm still wondering what happened to labels when you use mail merge...) but as a whole I'm happy with the changes they made. I suspect that's why I wanted to see the corrections made to your page since it is a 'win' for user feedback. :-) Also, as for changing everything back to the way it was, instead of modifying styles and such, you can simply switch to the Word 2003 style set. This is available under Change Styles/Style Sets. After you select "Word 2003" in the Style Set list, if you want to use it as your default then click the Change Styles button again and then click "Set as Default". Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I have now re-written the offending paragraph - http://www.gmayor.com/merge_labels_w...2007.htm#Note: which should now cover what is supposed to happen and what I see happening -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Graham Mayor wrote: This is not the behaviour I see here - at least not consistently Here the default setting for the Normal paragraph style is to have 10 points of space after, and multiple line spacing is set to 1.15. There is another style in the default set called 'No Spacing' which is what I would have expected 'Normal. to be. Normal style is used by default in tables - and this isn't a beta copy of Word (I skipped the beta process entirely) and is tested for the purpose of clarification in its safe mode - so tables have added space. However there is some additional behaviour going on here, which seems a tad hit and miss. Sometimes when you insert and address into the labels tool window, the address is posted into the label (new document) with added space and then it is reformatted to remove the extra padding. Other times it doesn't do that and the spacing remains. It all seems a tad flaky to me. I will however return to that disputed paragraph and make some change based on what I find. Removing the space from the normal style and creating a new style with the spacing (I renamed the No Spacing style after I added the spacing to it) removes the anomaly, and as this was how Word was setup through its recent versions, I fail to see why they changed it to complicate matters. Beth Melton wrote: I pointed this out to you in my previous reply regarding the behavior of lables in Word 2007 but I'll mention it again. ;-) On your page you have this note: "Microsoft appears to have retained the default use of the 'normal' paragraph style to format tables; however, in Word 2007, the normal paragraph style has added spacing. This will result in extra spacing between the lines of the addresses on the labels when created using the label tool..." Technically this statement is incorrect. By default, Word 2007 does not add any additional spacing, not between paragraphs or line spacing, on labels you create using the Labels command on the Mailings tab. Now, if *you* modify your Normal style and add extra spacing then in this scenario that spacing will also be added to the labels. I suspect this is why you are seeing this behavior. Note that one of the beta versions did include the additional space but due to feedback they received this behavior was changed in RTM. Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I don't intentionally post misleading information on my web site, so OK, I'll bite. What is wrong with the information as it now stands? I have checked my comments using Word 2007 in its safe mode, but I will concede that it is possible to get so close to a project that you miss things or misinterpret things that others see. I have added a paragraph at the start of the page as it would appear that I am advocating sticking to ancient ways, whereas my intention was to show that they were still available. I have also added a hyperlink to allow readers to jump over the following section. I am not using nor ever have used the beta version? -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Incidentally, there is still some misinformation on your page regarding Word 2007 labels. Do you happen to still be using a beta version? Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I made the changes to my web site yesterday, which you may find of interest - All your users would have to do is save the formatted merge source document and attach the data file as required (assuming the same field names) http://www.gmayor.com/merge_labels_with_word_2007.htm -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Thanks you both, Beth and Graham, I was starting to think I was totally missing something and was nuts. I will direct users to make a default template to use and maybe MS will add something in the future so this won't be necessary! :-) Thanks for your time! LT "Graham Mayor" wrote: OK - I see what you mean. I had prepared my web page http://www.gmayor.com/merge_labels_with_word_2007.htm based on the default settings of Word 2007 and noted in it the problem with spacing of the addresses. I subsequently modified the normal style which is used as in previous versions as the default for tables and took it as read that it would apply also to tables created as part of mail merge - which as you point out it doesn't. Although the suggestions on my web page for dealing with the spacing remain valid, the reasons don't so I will have to re-address that over the weekend -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Have you actually tried this in Word 2007 and *mail merge* labels, Graham?? Regular labels are fine and they automatically use no spacing with no need to modify the defaults. It's when using mail merge this occurs. As soon as you select Labels as the main document type, space *before* each paragraph and single space are added as direct formatting. The new defaults use 10 pts space after (not 12) and 1.15 lines between. Additional Notes: - When using Outlook 2007, Word is irrelevant since Outlook no longer uses Winword.exe and does not use Normal.dotm. - If you want to avoid the issues with table styles, and other style nuances we experienced in past versions, then you should modify the Document Defaults and leave the Normal style unmodified. - The Normal template for Word 2007 is always Norma.dotm - never Normal.dotx. ~Beth Melton "Graham Mayor" wrote in message ... The normal template in Word 2007 will be normal.dotm (or dotx) rather than normal.dot which was for earlier versions, and suggests that you are editing the wrong file. It is certainly possible to set the normal style to have no space before or after and thus have labels which match. Right click 'Normal' on the home tab. Choose 'Modify'. Remove spacing from the paragraph formatting options. Check the 'new documents based on this style' check box and when you close out of Word (plus Outlook if running) , save the normal template when prompted. |
#28
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
Good response re MSloth thinking we should follow their piper.
Unfortunately, I am stuck in a campus environment using MSloth 2007, and I am a true died-in-the-wool user of Corel WordPerfect---have been since before they were known as WP. cosmo "Icemaiden" wrote: Well, I changed my "normal" style to be single spaced a while ago so that doesn't seem to be the solution and I don't use the address block for the merges, I put in each separate field. So what I'm hearing, is there is no way to set the default label document to be single spaced?! I have an office of 21 people that use Word merges with Access and I'd really like to be able to tell them how to configure their software to work correctly. Sometimes I really dislike Microsoft with their holier-than-thou decisions on what they think people should use. Office 2007 is a prime example! Thanks. LT "Doug Robbins - Word MVP" wrote: Are you talking about line spacing or paragraph spacing. Possibly you have the paragraph spacing in the Normal style set to have 12pts after it and because the elements of the address are in separate paragraphs, they appear to be double spaced. You may also be using the addressblock which has each element of the address in a separate paragraph. Instead of doing that, just insert the individual merge fields into the label in the configuration that you want them, separating each with a new line feed (Shift+Enter) rather than a carriage return if you want to retain the space between paragraphs in your Normal style. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "Icemaiden" wrote in message ... I've set my default template/document in Word 2007 to single space for all new documents. However, this doesn't seem to hold true when trying to do a mail merge with labels??!!?? I can't seem to find a way to change the default label document - if there is such an animal.... I want all my documents to be single spaced - labels, envelopes, letters etc. - I want it to be the default (don't want to manually change each and every document I create). If I choose to change to a different paragraph style, I will! I don't want MS to choose for me. Help!?!?! Thanks. :-) LT |
#29
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
IF YOU DON'T LIKE PROVIDING COURTEOUS SERVICE TO THE NUMEROUS QUESTIONS
ASKED, LOOK FOR ANOTHER JOB. If my business found out an employee was treating a customer in the inane fashion you did by telling them to use another product, that employee would be terminated for cause, and immediately escorted out by security forces. Having a bad day? Don't come to work and take it out on the valued customer that used/purchased your MSloth products. Indeed, have you no shame? Cosmo "Graham Mayor" wrote: It is nothing to do with single spacing, but with inter-paragarph spacing. The default setting for normal style (used for labels) is to have 12 points of space after each paragraph and it is that that appears to show the double spacing on the labels (the address lines each being a paragraph). It seems odd that Microsoft swapped Normal style and the No spaced stype while leaving normal as the default style for labels. They would have been better creating a normal spaced style and left normal unspaced as in previous versions. You can make these changes if you wish as long as you remember to save them in normal.dot. If you don't like Microsoft products there are alternatives you can buy. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Well, I changed my "normal" style to be single spaced a while ago so that doesn't seem to be the solution and I don't use the address block for the merges, I put in each separate field. So what I'm hearing, is there is no way to set the default label document to be single spaced?! I have an office of 21 people that use Word merges with Access and I'd really like to be able to tell them how to configure their software to work correctly. Sometimes I really dislike Microsoft with their holier-than-thou decisions on what they think people should use. Office 2007 is a prime example! Thanks. LT "Doug Robbins - Word MVP" wrote: Are you talking about line spacing or paragraph spacing. Possibly you have the paragraph spacing in the Normal style set to have 12pts after it and because the elements of the address are in separate paragraphs, they appear to be double spaced. You may also be using the addressblock which has each element of the address in a separate paragraph. Instead of doing that, just insert the individual merge fields into the label in the configuration that you want them, separating each with a new line feed (Shift+Enter) rather than a carriage return if you want to retain the space between paragraphs in your Normal style. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "Icemaiden" wrote in message ... I've set my default template/document in Word 2007 to single space for all new documents. However, this doesn't seem to hold true when trying to do a mail merge with labels??!!?? I can't seem to find a way to change the default label document - if there is such an animal.... I want all my documents to be single spaced - labels, envelopes, letters etc. - I want it to be the default (don't want to manually change each and every document I create). If I choose to change to a different paragraph style, I will! I don't want MS to choose for me. Help!?!?! Thanks. :-) LT |
#30
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
Please note that Graham is not a Microsoft employee. We are all volunteers
here. I see nothing discourteous in Graham's reply, which was actually quite informative. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA Word MVP FAQ site: http://word.mvps.org Email cannot be acknowledged; please post all follow-ups to the newsgroup so all may benefit. "COSMO" wrote in message ... IF YOU DON'T LIKE PROVIDING COURTEOUS SERVICE TO THE NUMEROUS QUESTIONS ASKED, LOOK FOR ANOTHER JOB. If my business found out an employee was treating a customer in the inane fashion you did by telling them to use another product, that employee would be terminated for cause, and immediately escorted out by security forces. Having a bad day? Don't come to work and take it out on the valued customer that used/purchased your MSloth products. Indeed, have you no shame? Cosmo "Graham Mayor" wrote: It is nothing to do with single spacing, but with inter-paragarph spacing. The default setting for normal style (used for labels) is to have 12 points of space after each paragraph and it is that that appears to show the double spacing on the labels (the address lines each being a paragraph). It seems odd that Microsoft swapped Normal style and the No spaced stype while leaving normal as the default style for labels. They would have been better creating a normal spaced style and left normal unspaced as in previous versions. You can make these changes if you wish as long as you remember to save them in normal.dot. If you don't like Microsoft products there are alternatives you can buy. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Well, I changed my "normal" style to be single spaced a while ago so that doesn't seem to be the solution and I don't use the address block for the merges, I put in each separate field. So what I'm hearing, is there is no way to set the default label document to be single spaced?! I have an office of 21 people that use Word merges with Access and I'd really like to be able to tell them how to configure their software to work correctly. Sometimes I really dislike Microsoft with their holier-than-thou decisions on what they think people should use. Office 2007 is a prime example! Thanks. LT "Doug Robbins - Word MVP" wrote: Are you talking about line spacing or paragraph spacing. Possibly you have the paragraph spacing in the Normal style set to have 12pts after it and because the elements of the address are in separate paragraphs, they appear to be double spaced. You may also be using the addressblock which has each element of the address in a separate paragraph. Instead of doing that, just insert the individual merge fields into the label in the configuration that you want them, separating each with a new line feed (Shift+Enter) rather than a carriage return if you want to retain the space between paragraphs in your Normal style. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "Icemaiden" wrote in message ... I've set my default template/document in Word 2007 to single space for all new documents. However, this doesn't seem to hold true when trying to do a mail merge with labels??!!?? I can't seem to find a way to change the default label document - if there is such an animal.... I want all my documents to be single spaced - labels, envelopes, letters etc. - I want it to be the default (don't want to manually change each and every document I create). If I choose to change to a different paragraph style, I will! I don't want MS to choose for me. Help!?!?! Thanks. :-) LT |
#31
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
No-one here works for or speaks for Microsoft.
I provide Word support for users both in these forums and on my web site at my own expense and in my own time. Neither do I have much time for anonymous whingers, who jump into someone elses thread to make their own petty points, or for Word Perfect users who come here to report how hard done to they are, by having to work for an organisation that makes them use a different product. If you have an issue with your employers take it up with them. If you want free user peer group support you take on the rough and tumble of the user forums. If you want manufacturer's help desk support then I am sure Microsoft would be happy to take your money. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org COSMO wrote: IF YOU DON'T LIKE PROVIDING COURTEOUS SERVICE TO THE NUMEROUS QUESTIONS ASKED, LOOK FOR ANOTHER JOB. If my business found out an employee was treating a customer in the inane fashion you did by telling them to use another product, that employee would be terminated for cause, and immediately escorted out by security forces. Having a bad day? Don't come to work and take it out on the valued customer that used/purchased your MSloth products. Indeed, have you no shame? Cosmo "Graham Mayor" wrote: It is nothing to do with single spacing, but with inter-paragarph spacing. The default setting for normal style (used for labels) is to have 12 points of space after each paragraph and it is that that appears to show the double spacing on the labels (the address lines each being a paragraph). It seems odd that Microsoft swapped Normal style and the No spaced stype while leaving normal as the default style for labels. They would have been better creating a normal spaced style and left normal unspaced as in previous versions. You can make these changes if you wish as long as you remember to save them in normal.dot. If you don't like Microsoft products there are alternatives you can buy. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Well, I changed my "normal" style to be single spaced a while ago so that doesn't seem to be the solution and I don't use the address block for the merges, I put in each separate field. So what I'm hearing, is there is no way to set the default label document to be single spaced?! I have an office of 21 people that use Word merges with Access and I'd really like to be able to tell them how to configure their software to work correctly. Sometimes I really dislike Microsoft with their holier-than-thou decisions on what they think people should use. Office 2007 is a prime example! Thanks. LT "Doug Robbins - Word MVP" wrote: Are you talking about line spacing or paragraph spacing. Possibly you have the paragraph spacing in the Normal style set to have 12pts after it and because the elements of the address are in separate paragraphs, they appear to be double spaced. You may also be using the addressblock which has each element of the address in a separate paragraph. Instead of doing that, just insert the individual merge fields into the label in the configuration that you want them, separating each with a new line feed (Shift+Enter) rather than a carriage return if you want to retain the space between paragraphs in your Normal style. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "Icemaiden" wrote in message ... I've set my default template/document in Word 2007 to single space for all new documents. However, this doesn't seem to hold true when trying to do a mail merge with labels??!!?? I can't seem to find a way to change the default label document - if there is such an animal.... I want all my documents to be single spaced - labels, envelopes, letters etc. - I want it to be the default (don't want to manually change each and every document I create). If I choose to change to a different paragraph style, I will! I don't want MS to choose for me. Help!?!?! Thanks. :-) LT |
#32
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
Continued responses such as these will paint you as nothing more than a
troll and we don't feed trolls around here. Not even those who find themselves with a problem and come crawling back seeking help. Once a troll always a troll. Now, if you aren't a troll and have come here seeking help then my suggestion to you is to stop behaving like one. We aren't a bunch of Microsoft cheerleaders. We're nothing more than users, just like you, who are here to learn more about the applications we are using, either by personal preference or forced usage. At the same time we don't want a bunch of negative bs being tossed around. This is a friendly environment and we strive to keep it that way. So it's your choice, change the attitude and you'll be welcome here. There a several around here that are or were in your shoes so I'm sure you'll fit in. :-) Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton "COSMO" wrote in message ... Good response re MSloth thinking we should follow their piper. Unfortunately, I am stuck in a campus environment using MSloth 2007, and I am a true died-in-the-wool user of Corel WordPerfect---have been since before they were known as WP. cosmo "Icemaiden" wrote: Well, I changed my "normal" style to be single spaced a while ago so that doesn't seem to be the solution and I don't use the address block for the merges, I put in each separate field. So what I'm hearing, is there is no way to set the default label document to be single spaced?! I have an office of 21 people that use Word merges with Access and I'd really like to be able to tell them how to configure their software to work correctly. Sometimes I really dislike Microsoft with their holier-than-thou decisions on what they think people should use. Office 2007 is a prime example! Thanks. LT "Doug Robbins - Word MVP" wrote: Are you talking about line spacing or paragraph spacing. Possibly you have the paragraph spacing in the Normal style set to have 12pts after it and because the elements of the address are in separate paragraphs, they appear to be double spaced. You may also be using the addressblock which has each element of the address in a separate paragraph. Instead of doing that, just insert the individual merge fields into the label in the configuration that you want them, separating each with a new line feed (Shift+Enter) rather than a carriage return if you want to retain the space between paragraphs in your Normal style. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "Icemaiden" wrote in message ... I've set my default template/document in Word 2007 to single space for all new documents. However, this doesn't seem to hold true when trying to do a mail merge with labels??!!?? I can't seem to find a way to change the default label document - if there is such an animal.... I want all my documents to be single spaced - labels, envelopes, letters etc. - I want it to be the default (don't want to manually change each and every document I create). If I choose to change to a different paragraph style, I will! I don't want MS to choose for me. Help!?!?! Thanks. :-) LT |
#33
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
"Beth Melton" wrote: Now, the note wasn't offending. ;-) This is one of those areas I fought hard for during the beta. Originally, the new default spacing infiltrated *everything*. Labels, envelopes, you name it. Thankfully Microsoft did listen to the feedback and changed the behaviors. I suspect there were a few areas that were missed (I'm still wondering what happened to labels when you use mail merge...) but as a whole I'm happy with the changes they made. I suspect that's why I wanted to see the corrections made to your page since it is a 'win' for user feedback. :-) Also, as for changing everything back to the way it was, instead of modifying styles and such, you can simply switch to the Word 2003 style set. This is available under Change Styles/Style Sets. After you select "Word 2003" in the Style Set list, if you want to use it as your default then click the Change Styles button again and then click "Set as Default". Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I have now re-written the offending paragraph - http://www.gmayor.com/merge_labels_w...2007.htm#Note: which should now cover what is supposed to happen and what I see happening -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Graham Mayor wrote: This is not the behaviour I see here - at least not consistently Here the default setting for the Normal paragraph style is to have 10 points of space after, and multiple line spacing is set to 1.15. There is another style in the default set called 'No Spacing' which is what I would have expected 'Normal. to be. Normal style is used by default in tables - and this isn't a beta copy of Word (I skipped the beta process entirely) and is tested for the purpose of clarification in its safe mode - so tables have added space. However there is some additional behaviour going on here, which seems a tad hit and miss. Sometimes when you insert and address into the labels tool window, the address is posted into the label (new document) with added space and then it is reformatted to remove the extra padding. Other times it doesn't do that and the spacing remains. It all seems a tad flaky to me. I will however return to that disputed paragraph and make some change based on what I find. Removing the space from the normal style and creating a new style with the spacing (I renamed the No Spacing style after I added the spacing to it) removes the anomaly, and as this was how Word was setup through its recent versions, I fail to see why they changed it to complicate matters. Beth Melton wrote: I pointed this out to you in my previous reply regarding the behavior of lables in Word 2007 but I'll mention it again. ;-) On your page you have this note: "Microsoft appears to have retained the default use of the 'normal' paragraph style to format tables; however, in Word 2007, the normal paragraph style has added spacing. This will result in extra spacing between the lines of the addresses on the labels when created using the label tool..." Technically this statement is incorrect. By default, Word 2007 does not add any additional spacing, not between paragraphs or line spacing, on labels you create using the Labels command on the Mailings tab. Now, if *you* modify your Normal style and add extra spacing then in this scenario that spacing will also be added to the labels. I suspect this is why you are seeing this behavior. Note that one of the beta versions did include the additional space but due to feedback they received this behavior was changed in RTM. Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I don't intentionally post misleading information on my web site, so OK, I'll bite. What is wrong with the information as it now stands? I have checked my comments using Word 2007 in its safe mode, but I will concede that it is possible to get so close to a project that you miss things or misinterpret things that others see. I have added a paragraph at the start of the page as it would appear that I am advocating sticking to ancient ways, whereas my intention was to show that they were still available. I have also added a hyperlink to allow readers to jump over the following section. I am not using nor ever have used the beta version? -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Incidentally, there is still some misinformation on your page regarding Word 2007 labels. Do you happen to still be using a beta version? Please post all follow-up questions to the newsgroup. Requests for assistance by email cannot be acknowledged. ~~~~~~~~~~~~~~~ Beth Melton Microsoft Office MVP Coauthor of Word 2007 Inside Out: http://www.microsoft.com/MSPress/boo...x#AboutTheBook Word FAQ: http://mvps.org/word TechTrax eZine: http://mousetrax.com/techtrax/ MVP FAQ site: http://mvps.org/ "Graham Mayor" wrote in message ... I made the changes to my web site yesterday, which you may find of interest - All your users would have to do is save the formatted merge source document and attach the data file as required (assuming the same field names) http://www.gmayor.com/merge_labels_with_word_2007.htm -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Icemaiden wrote: Thanks you both, Beth and Graham, I was starting to think I was totally missing something and was nuts. I will direct users to make a default template to use and maybe MS will add something in the future so this won't be necessary! :-) Thanks for your time! LT "Graham Mayor" wrote: OK - I see what you mean. I had prepared my web page http://www.gmayor.com/merge_labels_with_word_2007.htm based on the default settings of Word 2007 and noted in it the problem with spacing of the addresses. I subsequently modified the normal style which is used as in previous versions as the default for tables and took it as read that it would apply also to tables created as part of mail merge - which as you point out it doesn't. Although the suggestions on my web page for dealing with the spacing remain valid, the reasons don't so I will have to re-address that over the weekend -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org Beth Melton wrote: Have you actually tried this in Word 2007 and *mail merge* labels, Graham?? Regular labels are fine and they automatically use no spacing with no need to modify the defaults. It's when using mail merge this occurs. As soon as you select Labels as the main document type, space *before* each paragraph and single space are added as direct formatting. The new defaults use 10 pts space after (not 12) and 1.15 lines between. Additional Notes: - When using Outlook 2007, Word is irrelevant since Outlook no longer uses Winword.exe and does not use Normal.dotm. - If you want to avoid the issues with table styles, and other style nuances we experienced in past versions, then you should modify the Document Defaults and leave the Normal style unmodified. - The Normal template for Word 2007 is always Norma.dotm - never Normal.dotx. ~Beth Melton "Graham Mayor" wrote in message ... The normal template in Word 2007 will be normal.dotm (or dotx) rather than normal.dot which was for earlier versions, and suggests that you are editing the wrong file. It is certainly possible to set the normal style to have no space before or after and thus have labels which match. Right click 'Normal' on the home tab. Choose 'Modify'. Remove spacing from the paragraph formatting options. Check the 'new documents based on this style' check box and when you close out of Word (plus Outlook if running) , save the normal template when prompted. |
#34
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
"Icemaiden" wrote: I've set my default template/document in Word 2007 to single space for all new documents. However, this doesn't seem to hold true when trying to do a mail merge with labels??!!?? I can't seem to find a way to change the default label document - if there is such an animal.... I want all my documents to be single spaced - labels, envelopes, letters etc. - I want it to be the default (don't want to manually change each and every document I create). If I choose to change to a different paragraph style, I will! I don't want MS to choose for me. Help!?!?! Thanks. :-) LT |
#35
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Labels-single spacing - how to make default Word 2007
"Icemaiden" wrote: I've set my default template/document in Word 2007 to single space for all new documents. However, this doesn't seem to hold true when trying to do a mail merge with labels??!!?? I can't seem to find a way to change the default label document - if there is such an animal.... I want all my documents to be single spaced - labels, envelopes, letters etc. - I want it to be the default (don't want to manually change each and every document I create). If I choose to change to a different paragraph style, I will! I don't want MS to choose for me. Help!?!?! Thanks. :-) LT |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Word 2007 --How to Get single line spacing | Page Layout | |||
How do I change Word single space default to double spacing? | Microsoft Word Help | |||
Single Spacing Default Word 2007 | Microsoft Word Help | |||
How do you make AddressBlock print with single spacing in Office | Mailmerge | |||
how to default single-line spacing for word & e-mail? | New Users |