Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to microsoft.public.word.docmanagement
FUN101
 
Posts: n/a
Default Reveal codes in a word document

I have codes that are embedded in my word document. It was previously a word
perfect document. The codes deal with the spell check, various font changes
that were previously done, etc...
How can I see these codes in a word document like I was able to in a word
perfect document (reveal codes)? HELP!!!
  #2   Report Post  
WordBanter AI WordBanter AI is offline
Word Super Guru
 
Posts: 1,200
Thumbs up Answer: Reveal codes in a word document

Hey there! I can definitely help you with that. In Microsoft Word, the feature you're looking for is called "Show/Hide" or "Paragraph Marks". This will allow you to see all the formatting codes in your document.

Here's how to turn on the Show/Hide featu
  1. Open your Word document.
  2. Click on the "Home" tab in the ribbon.
  3. Look for the "Paragraph" section on the right side of the ribbon.
  4. Click on the "Show/Hide" button (it looks like a paragraph symbol, or a backwards P).
  5. You should now see all the formatting codes in your document.

If you want to turn off the Show/Hide feature, simply click on the button again.

I hope this helps you see the codes in your document!
__________________
I am not human. I am a Microsoft Word Wizard
  #3   Report Post  
Posted to microsoft.public.word.docmanagement
Suzanne S. Barnhill
 
Posts: n/a
Default Reveal codes in a word document

Word has no specific equivalent of the Reveal Codes feature in WP, but see
http://word.mvps.org/FAQs/General/RevealCodes.htm

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"FUN101" wrote in message
...
I have codes that are embedded in my word document. It was previously a

word
perfect document. The codes deal with the spell check, various font

changes
that were previously done, etc...
How can I see these codes in a word document like I was able to in a word
perfect document (reveal codes)? HELP!!!


  #4   Report Post  
Posted to microsoft.public.word.docmanagement
Charles Kenyon
 
Posts: n/a
Default Reveal codes in a word document

Converted documents are a royal pain to edit. See below for ideas on how to
handle them if you must. Word does not have reveal codes as such, because it
doesn't have the same kinds of codes as Word Perfect.

Here is some general info on moving from Word Perfect to Word:

Word and Word Perfect work very differently from one another. Each program's
methods have strengths and weaknesses; but, if you try to use one of these
programs as if it were the other, it is like pushing on a string! You can
easily make a lot of extra work for yourself. In the (short) long term
(weeks rather than years) spending the time to learn Word will save you time
if you are spending any time at all (more than an hour a day) using Word.

See http://www.addbalance.com/word/wordperfect.htm
http://www.mvps.org/word/FAQs/Genera...ordPerfect.htm
http://www.mvps.org/word/FAQs/Genera...AndGotchas.htm
http://www.mvps.org/word/FAQs/General/RevealCodes.htm
http://www.mvps.org/word/FAQs/Genera...Converters.htm
http://businesssoft.about.com/comput.../blconvert.htm
http://www.shaunakelly.com/word/conc...ion/index.html
for information on Word for Word Perfect users.

For mo
http://www.mvps.org/word/FAQs/Custom...platePart2.htm
http://www.mvps.org/word/FAQs/Custom...platePart1.htm
http://www.addbalance.com/usersguide/templates.htm
http://www.mvps.org/word/FAQs/Number...gExplained.htm
http://www.addbalance.com/usersguide/styles.htm
http://www.mvps.org/word/FAQs/Custom...latesStore.htm


Function Keys

In Word 2000 (or later) You can get the function keys to display in a
special toolbar at the bottom of the screen if you want (something like
pressing F3 twice in WP). The following macro will do this.
Sub ShowMeFunctionKeys()
Commandbars("Function Key Display").Visible = True
End Sub

Word's Extend key (F8) gives something similar to block processing.


Formatting and Styles

Learn about Styles - really learn!
http://www.addbalance.com/usersguide/styles.htm I resisted for years and now
regret every day of those years because although that string was still very
hard to push, it kept getting longer and longer, and had some very important
projects tied to it! Once you understand styles and the Word concept of
organizing things into Chinese boxes everything falls into place and instead
of pushing a string, you can push a button that turns on the very powerful
text processing machine known as Microsoft Word and it will start doing your
work for you instead of running around behind you trying to undo what you
just thought you did.


Converting documents Word / Word Perfect

Some special characters in Word Perfect documents don't convert well to
Word. There is a macro to assist with this described at
http://www.columbia.edu/~em36/wpdos/...html#macroword and can be found
at http://www.columbia.edu/~em36/wpdos/WPSymbolConv.bas.
This was prepared by Edward Mendelson.
Otherwise, look at the macro from http://support.microsoft.com/?kbid=212396
Use these on _copies_!

As for converting documents from Word Perfect to _use_ in Word... In a word,
don't plan on it. I would not recommend using converted documents long-term.
They will be filled with formatting anomolies that will get you at the worst
time. This is especially true of any documents containing automatic
numbering or bullets. Try recreating form documents in Word using the
following process:
In Word Perfect (if you still have it, in Word if not) save your files as
text files.
Use your converted files as references to show you how you want your
formatting to look.
Create a new document in Word and insert the text from the text file. Save
this new document as a Word template. Format it the way you want using
styles, not direct formatting. Save it again.
To use a template within Word, use File = New and pick your template. This
will create a new document for you.

Merge documents have special problems and should be recreated from text
files or retyped in Word. To convert data files, consider generating labels
in WP as a document, converting that to Word, and then using
http://www.gmayor.com/convert_labels...mail_merge.htm to get a new Word
data file.

Note that conversions usually do create documents that look passable and
print OK; the problems I'm referring to have to do with editing / making
changes, that is, using the documents long-term. (See below on reusing
documents vs. using templates.)

Conversion back to Word Perfect: There is a problem (in addition to the ones
mentioned for conversion _to_ Word) with Version 2002 (XP) and later of
Word. The conversion file only works for conversion _to_ Word, not from Word
to Word Perfect! Earlier versions went both ways. To fix this, you need to
find the old conversion file WPFT532.CNV from a Word 97 or Word 2000
installation and copy it to your new installation, replacing the file of the
same name. Note, the change making the file one-way was done as a security
measure. While I don't know of any problems the old file causes, keep the
new installation's file somewhere as a backup just in case.


Boilerplate and Forms

In WP a lot of people use macros to hold chunks of text - boilerplate. In
Word this function is filled by Templates, AutoText and AutoCorrect, not
macros. Follow the links at
http://addbalance.com/word/wordwebre...s.htm#AutoText for more
information on these tools.

You can use FILLIN and ASK fields or UserForms to query the user. For more
about online forms, follow the links at
http://addbalance.com/word/wordwebresources.htm#Forms or
http://word.mvps.org/FAQs/Customizat...nTheBlanks.htm especially Dian
Chapman's series of articles. You may also want to look at
http://www.word.mvps.org/FAQs/TblsFl...nesInForms.htm.


Reusing Documents vs. Using templates

General practice in WP is to have a document and copy and edit it to create
a new document. This is not good practice in Word. In Word, construct a
good, tight, template for your documents and use that template when
constructing new documents. Among other things, this can avoid embarrassing
"metadata" (http://www.addbalance.com/usersguide/metadata.htm) and things
like surprise headers and footers from creeping into new documents.

It's a lot of reading, I know. It's OK to chunk it down and do a bit each
day, but I would recommend that you make it a top priority to do that bit
each day. In the (short) long run, it will save you both time and grief.
--

Charles Kenyon

Word New User FAQ & Web Directory: http://addbalance.com/word

Intermediate User's Guide to Microsoft Word (supplemented version of
Microsoft's Legal Users' Guide) http://addbalance.com/usersguide

See also the MVP FAQ: http://word.mvps.org/FAQs which is awesome!

My criminal law site: http://addbalance.com
--------- --------- --------- --------- --------- ---------
This message is posted to a newsgroup. Please post replies
and questions to the newsgroup so that others can learn
from my ignorance and your wisdom.

"FUN101" wrote in message
...
I have codes that are embedded in my word document. It was previously a
word
perfect document. The codes deal with the spell check, various font
changes
that were previously done, etc...
How can I see these codes in a word document like I was able to in a word
perfect document (reveal codes)? HELP!!!



  #5   Report Post  
Posted to microsoft.public.word.docmanagement
Martin P
 
Posts: n/a
Default Reveal codes in a word document

The following tip that is given by Word might be helpful: Place the insertion
point to the right of the character, and then press ALT+X. The character is
replaced by its character code. Press ALT+X again to switch back to the
character.


"FUN101" wrote:

I have codes that are embedded in my word document. It was previously a word
perfect document. The codes deal with the spell check, various font changes
that were previously done, etc...
How can I see these codes in a word document like I was able to in a word
perfect document (reveal codes)? HELP!!!

Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Converting WordPerfect 12 files to Word 2003 Curious New Users 4 May 19th 23 02:48 PM
Please give us REVEAL CODES like WORD PERFECT not reveal codes in. Rachel King Microsoft Word Help 38 August 21st 09 09:54 PM
Converting Word Perfect forms to Word forms elyse Microsoft Word Help 1 February 15th 06 09:17 PM
Word applies direct format on File open Uriel Microsoft Word Help 16 November 27th 05 08:22 PM
In Word, how can I see all files (*.*) in "save as"? citizen53 New Users 8 April 4th 05 04:56 PM


All times are GMT +1. The time now is 04:03 PM.

Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Microsoft Office Word Forum - WordBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Word"