Home |
Search |
Today's Posts |
|
#1
Posted to microsoft.public.access.formscoding,microsoft.public.word.docmanagement,microsoft.public.word.mailmerge.fields,microsoft.public.word.mailmergefields
|
|||
|
|||
Supress "Opening this document with run the following SQL command"
I know this must be asked 1000 times per day - so hopefully there is a
solution Can I stop word telling me what it's told me a million times before? namely "Opening this document with run the following SQL command" It's causing havoc - I am trying to open a document from an Access Form I can not answer the prompt because it is popping up underneath the modal form - the form will not budge because it's waiting for the prompt to be answered Only solution is CTRL+ALT+DEL |
#2
Posted to microsoft.public.access.formscoding,microsoft.public.word.docmanagement,microsoft.public.word.mailmerge.fields,microsoft.public.word.mailmergefields
|
|||
|
|||
Supress "Opening this document with run the following SQL command"
See the following Knowledge Base article:
"Opening This Will Run the Following SQL Command" Message When You Open a Word Document - 825765 at: http://support.microsoft.com?kbid=825765 Note these newsgroups are no longer hosted by Microsoft and are now orphans in the wilderness. As a replacement for the newsgroups, Microsoft has created forums that can be accessed at: http://social.answers.microsoft.com/...ory/officeword -- Hope this helps, Doug Robbins - Word MVP dkr[atsymbol]mvps[dot]org "Chris K" wrote in message news:QwGbo.110286$Tj3.16275@hurricane... I know this must be asked 1000 times per day - so hopefully there is a solution Can I stop word telling me what it's told me a million times before? namely "Opening this document with run the following SQL command" It's causing havoc - I am trying to open a document from an Access Form I can not answer the prompt because it is popping up underneath the modal form - the form will not budge because it's waiting for the prompt to be answered Only solution is CTRL+ALT+DEL |
#3
Posted to microsoft.public.access.formscoding,microsoft.public.word.docmanagement,microsoft.public.word.mailmerge.fields,microsoft.public.word.mailmergefields
|
|||
|
|||
Supress "Opening this document with run the following SQL command"
I'm not in a position to modify registry on company computers but thanks
So the short answer is that Access cannot be used to open an MS Word Mail merge P.S. Social Answers forums can not replace the current newsgroups currently - just took a peek and the existing forums barely scratch the surface of office apps (Access is hardly mentioned) Maybe in next 5 years "Doug Robbins - Word MVP" wrote in message ... See the following Knowledge Base article: "Opening This Will Run the Following SQL Command" Message When You Open a Word Document - 825765 at: http://support.microsoft.com?kbid=825765 Note these newsgroups are no longer hosted by Microsoft and are now orphans in the wilderness. As a replacement for the newsgroups, Microsoft has created forums that can be accessed at: http://social.answers.microsoft.com/...ory/officeword -- Hope this helps, Doug Robbins - Word MVP dkr[atsymbol]mvps[dot]org "Chris K" wrote in message news:QwGbo.110286$Tj3.16275@hurricane... I know this must be asked 1000 times per day - so hopefully there is a solution Can I stop word telling me what it's told me a million times before? namely "Opening this document with run the following SQL command" It's causing havoc - I am trying to open a document from an Access Form I can not answer the prompt because it is popping up underneath the modal form - the form will not budge because it's waiting for the prompt to be answered Only solution is CTRL+ALT+DEL |
#4
Posted to microsoft.public.access.formscoding,microsoft.public.word.docmanagement,microsoft.public.word.mailmerge.fields,microsoft.public.word.mailmergefields
|
|||
|
|||
Supress "Opening this document with run the following SQL command"
If you don't make the registry change, you merely have to acknowledge the
prompt. There's a macro at http://www.gmayor.com/word_vba_examples.htm which will toggle the prompt on/off, but as it writes to the registry, I don't suppose your company IT Nazis will approve of that either? Software does however write to the registry all the time. Agreed, the forums are poor, but they are the future ... unless everyone come back here -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org "Chris K" wrote in message news:BrPbo.104930$Nn4.62966@hurricane... I'm not in a position to modify registry on company computers but thanks So the short answer is that Access cannot be used to open an MS Word Mail merge P.S. Social Answers forums can not replace the current newsgroups currently - just took a peek and the existing forums barely scratch the surface of office apps (Access is hardly mentioned) Maybe in next 5 years "Doug Robbins - Word MVP" wrote in message ... See the following Knowledge Base article: "Opening This Will Run the Following SQL Command" Message When You Open a Word Document - 825765 at: http://support.microsoft.com?kbid=825765 Note these newsgroups are no longer hosted by Microsoft and are now orphans in the wilderness. As a replacement for the newsgroups, Microsoft has created forums that can be accessed at: http://social.answers.microsoft.com/...ory/officeword -- Hope this helps, Doug Robbins - Word MVP dkr[atsymbol]mvps[dot]org "Chris K" wrote in message news:QwGbo.110286$Tj3.16275@hurricane... I know this must be asked 1000 times per day - so hopefully there is a solution Can I stop word telling me what it's told me a million times before? namely "Opening this document with run the following SQL command" It's causing havoc - I am trying to open a document from an Access Form I can not answer the prompt because it is popping up underneath the modal form - the form will not budge because it's waiting for the prompt to be answered Only solution is CTRL+ALT+DEL |
#5
Posted to microsoft.public.access.formscoding,microsoft.public.word.docmanagement,microsoft.public.word.mailmerge.fields,microsoft.public.word.mailmergefields
|
|||
|
|||
Supress "Opening this document with run the following SQL command"
In message of Sat, 21 Aug 2010
16:10:40 in microsoft.public.word.mailmerge.fields, Graham Mayor writes If you don't make the registry change, you merely have to acknowledge the prompt. There's a macro at http://www.gmayor.com/word_vba_examples.htm which will toggle the prompt on/off, but as it writes to the registry, I don't suppose your company IT Nazis will approve of that either? Software does however write to the registry all the time. Agreed, the forums are poor, but they are the future ... unless everyone come back here I hope the forums are not the future, but fear I will be wrong. On reading Doug Robbins recommendation, I followed the link. I don't think he model does not give me what I have traditionally had with newsgroups and I don't like what I do get. e.g. 1) one line per thread subject. 2) threading so I can tell the relationship between posts. This thread is not a good example, as it consists of 4 messages: a) Chris K posted the first message; b) Doub Robbins replied to message a) c) Chris K replied to message b) d) Graham replied to message c). 3) I normally open a window in which threads containing new messages appear first and others in which I retain an interest are then shown. I can mark all messages as read, mark messages as interesting, and/or to be retained. I can zap old messages when I choose. 4) I can batch download messages for future attention. I don't need an Internet connection except when sending messages or grabbing them. 5) Cross-posting is supported. Used well, it can be helpful. 5) I can use Google groups to search a vast history of messages. 6) Group, and message creation is largely anarchic. There are probably virtues in the forums. All I can see to date is 1) They are promoted by Microsoft. 2) Their Traffic is likely to be heavier than in traditional newsgroups now that they exist. 3) Less spam - I assume this is true. -- Walter Briscoe |
#6
Posted to microsoft.public.access.formscoding,microsoft.public.word.docmanagement,microsoft.public.word.mailmerge.fields,microsoft.public.word.mailmergefields
|
|||
|
|||
Supress "Opening this document with run the following SQL command"
If you use the Community Bridge to access the newsgroups via an NNTP
newsreader, the experience is much the same as that to which you are accustomed. -- Hope this helps, Doug Robbins - Word MVP dkr[atsymbol]mvps[dot]org "Walter Briscoe" wrote in message ... In message of Sat, 21 Aug 2010 16:10:40 in microsoft.public.word.mailmerge.fields, Graham Mayor writes If you don't make the registry change, you merely have to acknowledge the prompt. There's a macro at http://www.gmayor.com/word_vba_examples.htm which will toggle the prompt on/off, but as it writes to the registry, I don't suppose your company IT Nazis will approve of that either? Software does however write to the registry all the time. Agreed, the forums are poor, but they are the future ... unless everyone come back here I hope the forums are not the future, but fear I will be wrong. On reading Doug Robbins recommendation, I followed the link. I don't think he model does not give me what I have traditionally had with newsgroups and I don't like what I do get. e.g. 1) one line per thread subject. 2) threading so I can tell the relationship between posts. This thread is not a good example, as it consists of 4 messages: a) Chris K posted the first message; b) Doub Robbins replied to message a) c) Chris K replied to message b) d) Graham replied to message c). 3) I normally open a window in which threads containing new messages appear first and others in which I retain an interest are then shown. I can mark all messages as read, mark messages as interesting, and/or to be retained. I can zap old messages when I choose. 4) I can batch download messages for future attention. I don't need an Internet connection except when sending messages or grabbing them. 5) Cross-posting is supported. Used well, it can be helpful. 5) I can use Google groups to search a vast history of messages. 6) Group, and message creation is largely anarchic. There are probably virtues in the forums. All I can see to date is 1) They are promoted by Microsoft. 2) Their Traffic is likely to be heavier than in traditional newsgroups now that they exist. 3) Less spam - I assume this is true. -- Walter Briscoe |
#7
Posted to microsoft.public.access.formscoding,microsoft.public.word.docmanagement
|
|||
|
|||
Supress "Opening this document with run the following SQL command"
On Sat, 21 Aug 2010 14:51:59 +0100, Walter Briscoe
wrote: There are probably virtues in the forums. All I can see to date is 1) They are promoted by Microsoft. 2) Their Traffic is likely to be heavier than in traditional newsgroups now that they exist. Much lighter, at least so far. MS is not prominently publicizing these groups, and they seem to be harder to find than the newsgroups. 3) Less spam - I assume this is true. That at least appears to be the case - there are moderators who do remove blatant spam promptly. The registration requirement (even if it's just the need to use a msn email account) probably does the most to keep spam down. -- John W. Vinson [MVP] Microsoft's replacements for these newsgroups: http://social.msdn.microsoft.com/For...-US/accessdev/ http://social.answers.microsoft.com/.../en-US/addbuz/ and see also http://www.utteraccess.com |
#8
Posted to microsoft.public.access.formscoding,microsoft.public.word.docmanagement,microsoft.public.word.mailmerge.fields,microsoft.public.word.mailmergefields
|
|||
|
|||
Supress "Opening this document with run the following SQL command"
"Graham Mayor" wrote in message ... If you don't make the registry change, you merely have to acknowledge the prompt. as mentioned, the prompt appears underneath the calling form, the form wont budge (and Word wont open) until the prompt is answered - chicken + egg = CTRL ALT Del There's a macro at http://www.gmayor.com/word_vba_examples.htm which will toggle the prompt on/off, but as it writes to the registry, I don't suppose your company IT Nazis will approve of that either? Software does however write to the registry all the time. Agreed, the forums are poor, but they are the future ... unless everyone come back here -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org "Chris K" wrote in message news:BrPbo.104930$Nn4.62966@hurricane... I'm not in a position to modify registry on company computers but thanks So the short answer is that Access cannot be used to open an MS Word Mail merge P.S. Social Answers forums can not replace the current newsgroups currently - just took a peek and the existing forums barely scratch the surface of office apps (Access is hardly mentioned) Maybe in next 5 years "Doug Robbins - Word MVP" wrote in message ... See the following Knowledge Base article: "Opening This Will Run the Following SQL Command" Message When You Open a Word Document - 825765 at: http://support.microsoft.com?kbid=825765 Note these newsgroups are no longer hosted by Microsoft and are now orphans in the wilderness. As a replacement for the newsgroups, Microsoft has created forums that can be accessed at: http://social.answers.microsoft.com/...ory/officeword -- Hope this helps, Doug Robbins - Word MVP dkr[atsymbol]mvps[dot]org "Chris K" wrote in message news:QwGbo.110286$Tj3.16275@hurricane... I know this must be asked 1000 times per day - so hopefully there is a solution Can I stop word telling me what it's told me a million times before? namely "Opening this document with run the following SQL command" It's causing havoc - I am trying to open a document from an Access Form I can not answer the prompt because it is popping up underneath the modal form - the form will not budge because it's waiting for the prompt to be answered Only solution is CTRL+ALT+DEL |
#9
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Supress "Opening this document with run the following SQL command"
|
#10
Posted to microsoft.public.access.formscoding,microsoft.public.word.docmanagement
|
|||
|
|||
Supress "Opening this document with run the following SQL command"
On Aug 21, 9:10*am, "Graham Mayor" wrote:
Agreed, the forums are poor, but they are the future ... unless everyone come back here Glad to see you back here -- do you have any idea why the macro you (I'm pretty sure) provided for transposing two letters works _nearly_ immediately on Word2007 on Vista, but very very slowly on Word2007 on Windows 7, on the laptop whose CPU is otherwise rather faster than the CPU in the old IBM ThinkCentre desktop? [followup set] |
#11
Posted to microsoft.public.word.docmanagement
|
|||
|
|||
Supress "Opening this document with run the following SQL command"
I have not been away With such low traffic, there have been few
opportunities to comment. I don't remember the particular macro, but I don't use Windows 7 so cannot check it out. If you post the code, someone else may be able to check it. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org "Peter T. Daniels" wrote in message ... On Aug 21, 9:10 am, "Graham Mayor" wrote: Agreed, the forums are poor, but they are the future ... unless everyone come back here Glad to see you back here -- do you have any idea why the macro you (I'm pretty sure) provided for transposing two letters works _nearly_ immediately on Word2007 on Vista, but very very slowly on Word2007 on Windows 7, on the laptop whose CPU is otherwise rather faster than the CPU in the old IBM ThinkCentre desktop? [followup set] |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Opening this will run the following SQL command | Mailmerge | |||
How to prevent sql command warning when opening merge document | Mailmerge | |||
"Opening this document will run the following SQL command" prompt problem | Mailmerge | |||
MS Word Warning on start up run SQL command - How to stop? | Microsoft Word Help | |||
Word Merge "opening this document will run the following SQL comma | Mailmerge |