[Randy]

I have a document with several chapters, each seperated by section breaks.
The page numbering starts over in all chapters but one. the numbering is 2-1,
2-2, 3-1, etc.

The chapter that won't restart is Chapter 1, which follows some frontmatter.
The frontmatter page numbers are numbered correctly (i, ii, iii, etc). The
first page of Chapter 1 begins with 2-1 instead of 1-1. I have section breaks
before and after the chapter. All of the other chapters restart the numbering
correctly except this one.

I've opened the footer in Chapter 1 that contains the page number and
changed the page number setting to "start at 1", but this doesn't help. "Link
to previous" is not selected.

Any help would be much appreciated.

Thanks,

Randy

[Suzanne S. Barnhill]

If the style used for the chapter numbering is part of an outline-numbered
list, make sure you don't have any lower-level heads preceding "Chapter 1."
Also check to make sure that you don't have any empty paragraphs or page
breaks before "Chapter 1" formatted with the heading style it uses.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I have a document with several chapters, each seperated by section breaks.
The page numbering starts over in all chapters but one. the numbering is
2-1,
2-2, 3-1, etc.

The chapter that won't restart is Chapter 1, which follows some
frontmatter.
The frontmatter page numbers are numbered correctly (i, ii, iii, etc). The
first page of Chapter 1 begins with 2-1 instead of 1-1. I have section
breaks
before and after the chapter. All of the other chapters restart the
numbering
correctly except this one.

I've opened the footer in Chapter 1 that contains the page number and
changed the page number setting to "start at 1", but this doesn't help.
"Link
to previous" is not selected.

Any help would be much appreciated.

Thanks,

Randy

[Randy]

The Chapter 1 title uses "Heading 1" style, and is preceded by a section
titled "References and Drawings" which uses the "Title Centered" style.
There is a page number and section break (next page) between them, but
deleting either or both didn't help. I didn't see any empty paragraphs
between the sections.

In the Page Number Format dialogue box, the "chapter starts with style" is
Heading 1.

I forgot to mention I'm using Word 2003.

"Suzanne S. Barnhill" wrote:

If the style used for the chapter numbering is part of an outline-numbered
list, make sure you don't have any lower-level heads preceding "Chapter 1."
Also check to make sure that you don't have any empty paragraphs or page
breaks before "Chapter 1" formatted with the heading style it uses.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I have a document with several chapters, each seperated by section breaks.
The page numbering starts over in all chapters but one. the numbering is
2-1,
2-2, 3-1, etc.

The chapter that won't restart is Chapter 1, which follows some
frontmatter.
The frontmatter page numbers are numbered correctly (i, ii, iii, etc). The
first page of Chapter 1 begins with 2-1 instead of 1-1. I have section
breaks
before and after the chapter. All of the other chapters restart the
numbering
correctly except this one.

I've opened the footer in Chapter 1 that contains the page number and
changed the page number setting to "start at 1", but this doesn't help.
"Link
to previous" is not selected.

Any help would be much appreciated.

Thanks,

Randy

[Randy]

There is also a page break and section break (next page) between Chapter 1 & 2.

"Randy" wrote:

The Chapter 1 title uses "Heading 1" style, and is preceded by a section
titled "References and Drawings" which uses the "Title Centered" style.
There is a page number and section break (next page) between them, but
deleting either or both didn't help. I didn't see any empty paragraphs
between the sections.

In the Page Number Format dialogue box, the "chapter starts with style" is
Heading 1.

I forgot to mention I'm using Word 2003.

"Suzanne S. Barnhill" wrote:

If the style used for the chapter numbering is part of an outline-numbered
list, make sure you don't have any lower-level heads preceding "Chapter 1."
Also check to make sure that you don't have any empty paragraphs or page
breaks before "Chapter 1" formatted with the heading style it uses.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I have a document with several chapters, each seperated by section breaks.
The page numbering starts over in all chapters but one. the numbering is
2-1,
2-2, 3-1, etc.

The chapter that won't restart is Chapter 1, which follows some
frontmatter.
The frontmatter page numbers are numbered correctly (i, ii, iii, etc). The
first page of Chapter 1 begins with 2-1 instead of 1-1. I have section
breaks
before and after the chapter. All of the other chapters restart the
numbering
correctly except this one.

I've opened the footer in Chapter 1 that contains the page number and
changed the page number setting to "start at 1", but this doesn't help.
"Link
to previous" is not selected.

Any help would be much appreciated.

Thanks,

Randy

[Suzanne S. Barnhill]

If you'd like to send me a portion of the problem doc, I'll take a look.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
The Chapter 1 title uses "Heading 1" style, and is preceded by a section
titled "References and Drawings" which uses the "Title Centered" style.
There is a page number and section break (next page) between them, but
deleting either or both didn't help. I didn't see any empty paragraphs
between the sections.

In the Page Number Format dialogue box, the "chapter starts with style" is
Heading 1.

I forgot to mention I'm using Word 2003.

"Suzanne S. Barnhill" wrote:

If the style used for the chapter numbering is part of an
outline-numbered
list, make sure you don't have any lower-level heads preceding "Chapter
1."
Also check to make sure that you don't have any empty paragraphs or page
breaks before "Chapter 1" formatted with the heading style it uses.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I have a document with several chapters, each seperated by section
breaks.
The page numbering starts over in all chapters but one. the numbering
is
2-1,
2-2, 3-1, etc.

The chapter that won't restart is Chapter 1, which follows some
frontmatter.
The frontmatter page numbers are numbered correctly (i, ii, iii, etc).
The
first page of Chapter 1 begins with 2-1 instead of 1-1. I have section
breaks
before and after the chapter. All of the other chapters restart the
numbering
correctly except this one.

I've opened the footer in Chapter 1 that contains the page number and
changed the page number setting to "start at 1", but this doesn't help.
"Link
to previous" is not selected.

Any help would be much appreciated.

Thanks,

Randy

[Randy]

I wish I could send the document, but it's proprietary to my company and I
can't. I'm having the same problem with Appendix B. The page numbers in
Appendix A are fine (A-1, A-2, etc), but the page numbers in Appendix B start
at A-1. I've followed Shana Kelly's suggestion to change the Chapter Starts
with Style box to choose Heading 6.

"Suzanne S. Barnhill" wrote:

If you'd like to send me a portion of the problem doc, I'll take a look.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
The Chapter 1 title uses "Heading 1" style, and is preceded by a section
titled "References and Drawings" which uses the "Title Centered" style.
There is a page number and section break (next page) between them, but
deleting either or both didn't help. I didn't see any empty paragraphs
between the sections.

In the Page Number Format dialogue box, the "chapter starts with style" is
Heading 1.

I forgot to mention I'm using Word 2003.

"Suzanne S. Barnhill" wrote:

If the style used for the chapter numbering is part of an
outline-numbered
list, make sure you don't have any lower-level heads preceding "Chapter
1."
Also check to make sure that you don't have any empty paragraphs or page
breaks before "Chapter 1" formatted with the heading style it uses.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I have a document with several chapters, each seperated by section
breaks.
The page numbering starts over in all chapters but one. the numbering
is
2-1,
2-2, 3-1, etc.

The chapter that won't restart is Chapter 1, which follows some
frontmatter.
The frontmatter page numbers are numbered correctly (i, ii, iii, etc).
The
first page of Chapter 1 begins with 2-1 instead of 1-1. I have section
breaks
before and after the chapter. All of the other chapters restart the
numbering
correctly except this one.

I've opened the footer in Chapter 1 that contains the page number and
changed the page number setting to "start at 1", but this doesn't help.
"Link
to previous" is not selected.

Any help would be much appreciated.

Thanks,

Randy

[Suzanne S. Barnhill]

Did you include Heading 6 as part of your outline numbering scheme?

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I wish I could send the document, but it's proprietary to my company and I
can't. I'm having the same problem with Appendix B. The page numbers in
Appendix A are fine (A-1, A-2, etc), but the page numbers in Appendix B
start
at A-1. I've followed Shana Kelly's suggestion to change the Chapter
Starts
with Style box to choose Heading 6.

"Suzanne S. Barnhill" wrote:

If you'd like to send me a portion of the problem doc, I'll take a look.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
The Chapter 1 title uses "Heading 1" style, and is preceded by a
section
titled "References and Drawings" which uses the "Title Centered"
style.
There is a page number and section break (next page) between them, but
deleting either or both didn't help. I didn't see any empty paragraphs
between the sections.

In the Page Number Format dialogue box, the "chapter starts with style"
is
Heading 1.

I forgot to mention I'm using Word 2003.

"Suzanne S. Barnhill" wrote:

If the style used for the chapter numbering is part of an
outline-numbered
list, make sure you don't have any lower-level heads preceding
"Chapter
1."
Also check to make sure that you don't have any empty paragraphs or
page
breaks before "Chapter 1" formatted with the heading style it uses.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I have a document with several chapters, each seperated by section
breaks.
The page numbering starts over in all chapters but one. the
numbering
is
2-1,
2-2, 3-1, etc.

The chapter that won't restart is Chapter 1, which follows some
frontmatter.
The frontmatter page numbers are numbered correctly (i, ii, iii,
etc).
The
first page of Chapter 1 begins with 2-1 instead of 1-1. I have
section
breaks
before and after the chapter. All of the other chapters restart the
numbering
correctly except this one.

I've opened the footer in Chapter 1 that contains the page number
and
changed the page number setting to "start at 1", but this doesn't
help.
"Link
to previous" is not selected.

Any help would be much appreciated.

Thanks,

Randy

[Randy]

I applied heading 6 to the appendix titles and the page numbers in the
appendix now work great! Thank you!

Now I just have to get Chapter 1 to start out as 1-1 instead of 2-1...

"Suzanne S. Barnhill" wrote:

Did you include Heading 6 as part of your outline numbering scheme?

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I wish I could send the document, but it's proprietary to my company and I
can't. I'm having the same problem with Appendix B. The page numbers in
Appendix A are fine (A-1, A-2, etc), but the page numbers in Appendix B
start
at A-1. I've followed Shana Kelly's suggestion to change the Chapter
Starts
with Style box to choose Heading 6.

"Suzanne S. Barnhill" wrote:

If you'd like to send me a portion of the problem doc, I'll take a look.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
The Chapter 1 title uses "Heading 1" style, and is preceded by a
section
titled "References and Drawings" which uses the "Title Centered"
style.
There is a page number and section break (next page) between them, but
deleting either or both didn't help. I didn't see any empty paragraphs
between the sections.

In the Page Number Format dialogue box, the "chapter starts with style"
is
Heading 1.

I forgot to mention I'm using Word 2003.

"Suzanne S. Barnhill" wrote:

If the style used for the chapter numbering is part of an
outline-numbered
list, make sure you don't have any lower-level heads preceding
"Chapter
1."
Also check to make sure that you don't have any empty paragraphs or
page
breaks before "Chapter 1" formatted with the heading style it uses.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I have a document with several chapters, each seperated by section
breaks.
The page numbering starts over in all chapters but one. the
numbering
is
2-1,
2-2, 3-1, etc.

The chapter that won't restart is Chapter 1, which follows some
frontmatter.
The frontmatter page numbers are numbered correctly (i, ii, iii,
etc).
The
first page of Chapter 1 begins with 2-1 instead of 1-1. I have
section
breaks
before and after the chapter. All of the other chapters restart the
numbering
correctly except this one.

I've opened the footer in Chapter 1 that contains the page number
and
changed the page number setting to "start at 1", but this doesn't
help.
"Link
to previous" is not selected.

Any help would be much appreciated.

Thanks,

Randy

[Randy]

When I select FormatStyles and Formatting, then right-click on Heading 1,
and click "Select all 4 instance(s)", only three are highlighted in the
document. I only have three chapters, so an empty paragraphs or page break
may exist before "Chapter 1". How do I find it and delete it?

"Randy" wrote:

I applied heading 6 to the appendix titles and the page numbers in the
appendix now work great! Thank you!

Now I just have to get Chapter 1 to start out as 1-1 instead of 2-1...

"Suzanne S. Barnhill" wrote:

Did you include Heading 6 as part of your outline numbering scheme?

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I wish I could send the document, but it's proprietary to my company and I
can't. I'm having the same problem with Appendix B. The page numbers in
Appendix A are fine (A-1, A-2, etc), but the page numbers in Appendix B
start
at A-1. I've followed Shana Kelly's suggestion to change the Chapter
Starts
with Style box to choose Heading 6.

"Suzanne S. Barnhill" wrote:

If you'd like to send me a portion of the problem doc, I'll take a look.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
The Chapter 1 title uses "Heading 1" style, and is preceded by a
section
titled "References and Drawings" which uses the "Title Centered"
style.
There is a page number and section break (next page) between them, but
deleting either or both didn't help. I didn't see any empty paragraphs
between the sections.

In the Page Number Format dialogue box, the "chapter starts with style"
is
Heading 1.

I forgot to mention I'm using Word 2003.

"Suzanne S. Barnhill" wrote:

If the style used for the chapter numbering is part of an
outline-numbered
list, make sure you don't have any lower-level heads preceding
"Chapter
1."
Also check to make sure that you don't have any empty paragraphs or
page
breaks before "Chapter 1" formatted with the heading style it uses.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I have a document with several chapters, each seperated by section
breaks.
The page numbering starts over in all chapters but one. the
numbering
is
2-1,
2-2, 3-1, etc.

The chapter that won't restart is Chapter 1, which follows some
frontmatter.
The frontmatter page numbers are numbered correctly (i, ii, iii,
etc).
The
first page of Chapter 1 begins with 2-1 instead of 1-1. I have
section
breaks
before and after the chapter. All of the other chapters restart the
numbering
correctly except this one.

I've opened the footer in Chapter 1 that contains the page number
and
changed the page number setting to "start at 1", but this doesn't
help.
"Link
to previous" is not selected.

Any help would be much appreciated.

Thanks,

Randy

[Suzanne S. Barnhill]

A good start is to display nonprinting characters (see
http://word.mvps.org/FAQs/Formatting/NonPrintChars.htm). You can also use
Find to search for a given style, and that might easily find it, or you can
use the Browse buttons to Browse by Heading. In a previous case (which was a
problem with a StyleRef field rather than numbering, but a similar issue),
it turned out that the style had been applied to the end-of-cell marker in a
table. The actual table text was in a separate paragraph with a different
style (the user had pressed Enter at the end of the text, leaving the EOC
marker as an empty paragraph), so it was far from obvious.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
When I select FormatStyles and Formatting, then right-click on Heading 1,
and click "Select all 4 instance(s)", only three are highlighted in the
document. I only have three chapters, so an empty paragraphs or page break
may exist before "Chapter 1". How do I find it and delete it?

"Randy" wrote:

I applied heading 6 to the appendix titles and the page numbers in the
appendix now work great! Thank you!

Now I just have to get Chapter 1 to start out as 1-1 instead of 2-1...

"Suzanne S. Barnhill" wrote:

Did you include Heading 6 as part of your outline numbering scheme?

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I wish I could send the document, but it's proprietary to my company
and I
can't. I'm having the same problem with Appendix B. The page numbers
in
Appendix A are fine (A-1, A-2, etc), but the page numbers in Appendix
B
start
at A-1. I've followed Shana Kelly's suggestion to change the Chapter
Starts
with Style box to choose Heading 6.

"Suzanne S. Barnhill" wrote:

If you'd like to send me a portion of the problem doc, I'll take a
look.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
The Chapter 1 title uses "Heading 1" style, and is preceded by a
section
titled "References and Drawings" which uses the "Title Centered"
style.
There is a page number and section break (next page) between them,
but
deleting either or both didn't help. I didn't see any empty
paragraphs
between the sections.

In the Page Number Format dialogue box, the "chapter starts with
style"
is
Heading 1.

I forgot to mention I'm using Word 2003.

"Suzanne S. Barnhill" wrote:

If the style used for the chapter numbering is part of an
outline-numbered
list, make sure you don't have any lower-level heads preceding
"Chapter
1."
Also check to make sure that you don't have any empty paragraphs
or
page
breaks before "Chapter 1" formatted with the heading style it
uses.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I have a document with several chapters, each seperated by
section
breaks.
The page numbering starts over in all chapters but one. the
numbering
is
2-1,
2-2, 3-1, etc.

The chapter that won't restart is Chapter 1, which follows some
frontmatter.
The frontmatter page numbers are numbered correctly (i, ii,
iii,
etc).
The
first page of Chapter 1 begins with 2-1 instead of 1-1. I have
section
breaks
before and after the chapter. All of the other chapters restart
the
numbering
correctly except this one.

I've opened the footer in Chapter 1 that contains the page
number
and
changed the page number setting to "start at 1", but this
doesn't
help.
"Link
to previous" is not selected.

Any help would be much appreciated.

Thanks,

Randy

[Randy]

Wow, I even tried deleting everything in the document prior to Chapter 1, and
the page numbering in chapter 1 still started with 2-1.

"Suzanne S. Barnhill" wrote:

A good start is to display nonprinting characters (see
http://word.mvps.org/FAQs/Formatting/NonPrintChars.htm). You can also use
Find to search for a given style, and that might easily find it, or you can
use the Browse buttons to Browse by Heading. In a previous case (which was a
problem with a StyleRef field rather than numbering, but a similar issue),
it turned out that the style had been applied to the end-of-cell marker in a
table. The actual table text was in a separate paragraph with a different
style (the user had pressed Enter at the end of the text, leaving the EOC
marker as an empty paragraph), so it was far from obvious.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
When I select FormatStyles and Formatting, then right-click on Heading 1,
and click "Select all 4 instance(s)", only three are highlighted in the
document. I only have three chapters, so an empty paragraphs or page break
may exist before "Chapter 1". How do I find it and delete it?

"Randy" wrote:

I applied heading 6 to the appendix titles and the page numbers in the
appendix now work great! Thank you!

Now I just have to get Chapter 1 to start out as 1-1 instead of 2-1...

"Suzanne S. Barnhill" wrote:

Did you include Heading 6 as part of your outline numbering scheme?

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I wish I could send the document, but it's proprietary to my company
and I
can't. I'm having the same problem with Appendix B. The page numbers
in
Appendix A are fine (A-1, A-2, etc), but the page numbers in Appendix
B
start
at A-1. I've followed Shana Kelly's suggestion to change the Chapter
Starts
with Style box to choose Heading 6.

"Suzanne S. Barnhill" wrote:

If you'd like to send me a portion of the problem doc, I'll take a
look.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
The Chapter 1 title uses "Heading 1" style, and is preceded by a
section
titled "References and Drawings" which uses the "Title Centered"
style.
There is a page number and section break (next page) between them,
but
deleting either or both didn't help. I didn't see any empty
paragraphs
between the sections.

In the Page Number Format dialogue box, the "chapter starts with
style"
is
Heading 1.

I forgot to mention I'm using Word 2003.

"Suzanne S. Barnhill" wrote:

If the style used for the chapter numbering is part of an
outline-numbered
list, make sure you don't have any lower-level heads preceding
"Chapter
1."
Also check to make sure that you don't have any empty paragraphs
or
page
breaks before "Chapter 1" formatted with the heading style it
uses.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I have a document with several chapters, each seperated by
section
breaks.
The page numbering starts over in all chapters but one. the
numbering
is
2-1,
2-2, 3-1, etc.

The chapter that won't restart is Chapter 1, which follows some
frontmatter.
The frontmatter page numbers are numbered correctly (i, ii,
iii,
etc).
The
first page of Chapter 1 begins with 2-1 instead of 1-1. I have
section
breaks
before and after the chapter. All of the other chapters restart
the
numbering
correctly except this one.

I've opened the footer in Chapter 1 that contains the page
number
and
changed the page number setting to "start at 1", but this
doesn't
help.
"Link
to previous" is not selected.

Any help would be much appreciated.

Thanks,

Randy

[Suzanne S. Barnhill]

If you can obfuscate the proprietary info and send me the doc, I'll take a
look (FWIW, I never pay any attention to the content of docs I look at,
anyway).

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
Wow, I even tried deleting everything in the document prior to Chapter 1,
and
the page numbering in chapter 1 still started with 2-1.

"Suzanne S. Barnhill" wrote:

A good start is to display nonprinting characters (see
http://word.mvps.org/FAQs/Formatting/NonPrintChars.htm). You can also use
Find to search for a given style, and that might easily find it, or you
can
use the Browse buttons to Browse by Heading. In a previous case (which
was a
problem with a StyleRef field rather than numbering, but a similar
issue),
it turned out that the style had been applied to the end-of-cell marker
in a
table. The actual table text was in a separate paragraph with a different
style (the user had pressed Enter at the end of the text, leaving the EOC
marker as an empty paragraph), so it was far from obvious.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
When I select FormatStyles and Formatting, then right-click on Heading
1,
and click "Select all 4 instance(s)", only three are highlighted in the
document. I only have three chapters, so an empty paragraphs or page
break
may exist before "Chapter 1". How do I find it and delete it?

"Randy" wrote:

I applied heading 6 to the appendix titles and the page numbers in the
appendix now work great! Thank you!

Now I just have to get Chapter 1 to start out as 1-1 instead of 2-1...

"Suzanne S. Barnhill" wrote:

Did you include Heading 6 as part of your outline numbering scheme?

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I wish I could send the document, but it's proprietary to my
company
and I
can't. I'm having the same problem with Appendix B. The page
numbers
in
Appendix A are fine (A-1, A-2, etc), but the page numbers in
Appendix
B
start
at A-1. I've followed Shana Kelly's suggestion to change the
Chapter
Starts
with Style box to choose Heading 6.

"Suzanne S. Barnhill" wrote:

If you'd like to send me a portion of the problem doc, I'll take
a
look.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
The Chapter 1 title uses "Heading 1" style, and is preceded by
a
section
titled "References and Drawings" which uses the "Title
Centered"
style.
There is a page number and section break (next page) between
them,
but
deleting either or both didn't help. I didn't see any empty
paragraphs
between the sections.

In the Page Number Format dialogue box, the "chapter starts
with
style"
is
Heading 1.

I forgot to mention I'm using Word 2003.

"Suzanne S. Barnhill" wrote:

If the style used for the chapter numbering is part of an
outline-numbered
list, make sure you don't have any lower-level heads preceding
"Chapter
1."
Also check to make sure that you don't have any empty
paragraphs
or
page
breaks before "Chapter 1" formatted with the heading style it
uses.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I have a document with several chapters, each seperated by
section
breaks.
The page numbering starts over in all chapters but one. the
numbering
is
2-1,
2-2, 3-1, etc.

The chapter that won't restart is Chapter 1, which follows
some
frontmatter.
The frontmatter page numbers are numbered correctly (i, ii,
iii,
etc).
The
first page of Chapter 1 begins with 2-1 instead of 1-1. I
have
section
breaks
before and after the chapter. All of the other chapters
restart
the
numbering
correctly except this one.

I've opened the footer in Chapter 1 that contains the page
number
and
changed the page number setting to "start at 1", but this
doesn't
help.
"Link
to previous" is not selected.

Any help would be much appreciated.

Thanks,

Randy

[Randy]

It looks like the problem is within the number for the first chapter. Chapter
1 looks like this:

1. Test Description & Conditions

When I delete everything in the document in front of the chapter title, the
page number remains 2-1. When I delete "Test Description & Conditions", the
page number doesn't change. It's when I delete "1.", that the page number
changes to 1-1 (which is correct). My chapters have to be numbered, though,
so how can I work around this?

I need my chapter numbering, page numbering, and TOC to be correct.


"Suzanne S. Barnhill" wrote:

If you can obfuscate the proprietary info and send me the doc, I'll take a
look (FWIW, I never pay any attention to the content of docs I look at,
anyway).

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
Wow, I even tried deleting everything in the document prior to Chapter 1,
and
the page numbering in chapter 1 still started with 2-1.

"Suzanne S. Barnhill" wrote:

A good start is to display nonprinting characters (see
http://word.mvps.org/FAQs/Formatting/NonPrintChars.htm). You can also use
Find to search for a given style, and that might easily find it, or you
can
use the Browse buttons to Browse by Heading. In a previous case (which
was a
problem with a StyleRef field rather than numbering, but a similar
issue),
it turned out that the style had been applied to the end-of-cell marker
in a
table. The actual table text was in a separate paragraph with a different
style (the user had pressed Enter at the end of the text, leaving the EOC
marker as an empty paragraph), so it was far from obvious.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
When I select FormatStyles and Formatting, then right-click on Heading
1,
and click "Select all 4 instance(s)", only three are highlighted in the
document. I only have three chapters, so an empty paragraphs or page
break
may exist before "Chapter 1". How do I find it and delete it?

"Randy" wrote:

I applied heading 6 to the appendix titles and the page numbers in the
appendix now work great! Thank you!

Now I just have to get Chapter 1 to start out as 1-1 instead of 2-1...

"Suzanne S. Barnhill" wrote:

Did you include Heading 6 as part of your outline numbering scheme?

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I wish I could send the document, but it's proprietary to my
company
and I
can't. I'm having the same problem with Appendix B. The page
numbers
in
Appendix A are fine (A-1, A-2, etc), but the page numbers in
Appendix
B
start
at A-1. I've followed Shana Kelly's suggestion to change the
Chapter
Starts
with Style box to choose Heading 6.

"Suzanne S. Barnhill" wrote:

If you'd like to send me a portion of the problem doc, I'll take
a
look.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
The Chapter 1 title uses "Heading 1" style, and is preceded by
a
section
titled "References and Drawings" which uses the "Title
Centered"
style.
There is a page number and section break (next page) between
them,
but
deleting either or both didn't help. I didn't see any empty
paragraphs
between the sections.

In the Page Number Format dialogue box, the "chapter starts
with
style"
is
Heading 1.

I forgot to mention I'm using Word 2003.

"Suzanne S. Barnhill" wrote:

If the style used for the chapter numbering is part of an
outline-numbered
list, make sure you don't have any lower-level heads preceding
"Chapter
1."
Also check to make sure that you don't have any empty
paragraphs
or
page
breaks before "Chapter 1" formatted with the heading style it
uses.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I have a document with several chapters, each seperated by
section
breaks.
The page numbering starts over in all chapters but one. the
numbering
is
2-1,
2-2, 3-1, etc.

The chapter that won't restart is Chapter 1, which follows
some
frontmatter.
The frontmatter page numbers are numbered correctly (i, ii,
iii,
etc).
The
first page of Chapter 1 begins with 2-1 instead of 1-1. I
have
section
breaks
before and after the chapter. All of the other chapters
restart
the
numbering
correctly except this one.

I've opened the footer in Chapter 1 that contains the page
number
and
changed the page number setting to "start at 1", but this
doesn't
help.
"Link
to previous" is not selected.

Any help would be much appreciated.

Thanks,

Randy

[Randy]

I fixed it!!

I double-clicked on the chapter # to open the Bullets and Numbering dialogue
box, went into customize, and toggled the Start at from 1 to 2 and back to 1,
and clicked OK. That made the page number for chapter 1 to change from 2-1 to
1-1.

Weird, but it worked!

"Randy" wrote:

It looks like the problem is within the number for the first chapter. Chapter
1 looks like this:

1. Test Description & Conditions

When I delete everything in the document in front of the chapter title, the
page number remains 2-1. When I delete "Test Description & Conditions", the
page number doesn't change. It's when I delete "1.", that the page number
changes to 1-1 (which is correct). My chapters have to be numbered, though,
so how can I work around this?

I need my chapter numbering, page numbering, and TOC to be correct.


"Suzanne S. Barnhill" wrote:

If you can obfuscate the proprietary info and send me the doc, I'll take a
look (FWIW, I never pay any attention to the content of docs I look at,
anyway).

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
Wow, I even tried deleting everything in the document prior to Chapter 1,
and
the page numbering in chapter 1 still started with 2-1.

"Suzanne S. Barnhill" wrote:

A good start is to display nonprinting characters (see
http://word.mvps.org/FAQs/Formatting/NonPrintChars.htm). You can also use
Find to search for a given style, and that might easily find it, or you
can
use the Browse buttons to Browse by Heading. In a previous case (which
was a
problem with a StyleRef field rather than numbering, but a similar
issue),
it turned out that the style had been applied to the end-of-cell marker
in a
table. The actual table text was in a separate paragraph with a different
style (the user had pressed Enter at the end of the text, leaving the EOC
marker as an empty paragraph), so it was far from obvious.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
When I select FormatStyles and Formatting, then right-click on Heading
1,
and click "Select all 4 instance(s)", only three are highlighted in the
document. I only have three chapters, so an empty paragraphs or page
break
may exist before "Chapter 1". How do I find it and delete it?

"Randy" wrote:

I applied heading 6 to the appendix titles and the page numbers in the
appendix now work great! Thank you!

Now I just have to get Chapter 1 to start out as 1-1 instead of 2-1...

"Suzanne S. Barnhill" wrote:

Did you include Heading 6 as part of your outline numbering scheme?

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I wish I could send the document, but it's proprietary to my
company
and I
can't. I'm having the same problem with Appendix B. The page
numbers
in
Appendix A are fine (A-1, A-2, etc), but the page numbers in
Appendix
B
start
at A-1. I've followed Shana Kelly's suggestion to change the
Chapter
Starts
with Style box to choose Heading 6.

"Suzanne S. Barnhill" wrote:

If you'd like to send me a portion of the problem doc, I'll take
a
look.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
The Chapter 1 title uses "Heading 1" style, and is preceded by
a
section
titled "References and Drawings" which uses the "Title
Centered"
style.
There is a page number and section break (next page) between
them,
but
deleting either or both didn't help. I didn't see any empty
paragraphs
between the sections.

In the Page Number Format dialogue box, the "chapter starts
with
style"
is
Heading 1.

I forgot to mention I'm using Word 2003.

"Suzanne S. Barnhill" wrote:

If the style used for the chapter numbering is part of an
outline-numbered
list, make sure you don't have any lower-level heads preceding
"Chapter
1."
Also check to make sure that you don't have any empty
paragraphs
or
page
breaks before "Chapter 1" formatted with the heading style it
uses.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I have a document with several chapters, each seperated by
section
breaks.
The page numbering starts over in all chapters but one. the
numbering
is
2-1,
2-2, 3-1, etc.

The chapter that won't restart is Chapter 1, which follows
some
frontmatter.
The frontmatter page numbers are numbered correctly (i, ii,
iii,
etc).
The
first page of Chapter 1 begins with 2-1 instead of 1-1. I
have
section
breaks
before and after the chapter. All of the other chapters
restart
the
numbering
correctly except this one.

I've opened the footer in Chapter 1 that contains the page
number
and
changed the page number setting to "start at 1", but this
doesn't
help.
"Link
to previous" is not selected.

Any help would be much appreciated.

Thanks,

Randy

[Suzanne S. Barnhill]

Sometimes Word just needs a swift kick!

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I fixed it!!

I double-clicked on the chapter # to open the Bullets and Numbering
dialogue
box, went into customize, and toggled the Start at from 1 to 2 and back to
1,
and clicked OK. That made the page number for chapter 1 to change from 2-1
to
1-1.

Weird, but it worked!

"Randy" wrote:

It looks like the problem is within the number for the first chapter.
Chapter
1 looks like this:

1. Test Description & Conditions

When I delete everything in the document in front of the chapter title,
the
page number remains 2-1. When I delete "Test Description & Conditions",
the
page number doesn't change. It's when I delete "1.", that the page number
changes to 1-1 (which is correct). My chapters have to be numbered,
though,
so how can I work around this?

I need my chapter numbering, page numbering, and TOC to be correct.


"Suzanne S. Barnhill" wrote:

If you can obfuscate the proprietary info and send me the doc, I'll
take a
look (FWIW, I never pay any attention to the content of docs I look at,
anyway).

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
Wow, I even tried deleting everything in the document prior to
Chapter 1,
and
the page numbering in chapter 1 still started with 2-1.

"Suzanne S. Barnhill" wrote:

A good start is to display nonprinting characters (see
http://word.mvps.org/FAQs/Formatting/NonPrintChars.htm). You can
also use
Find to search for a given style, and that might easily find it, or
you
can
use the Browse buttons to Browse by Heading. In a previous case
(which
was a
problem with a StyleRef field rather than numbering, but a similar
issue),
it turned out that the style had been applied to the end-of-cell
marker
in a
table. The actual table text was in a separate paragraph with a
different
style (the user had pressed Enter at the end of the text, leaving
the EOC
marker as an empty paragraph), so it was far from obvious.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
When I select FormatStyles and Formatting, then right-click on
Heading
1,
and click "Select all 4 instance(s)", only three are highlighted
in the
document. I only have three chapters, so an empty paragraphs or
page
break
may exist before "Chapter 1". How do I find it and delete it?

"Randy" wrote:

I applied heading 6 to the appendix titles and the page numbers
in the
appendix now work great! Thank you!

Now I just have to get Chapter 1 to start out as 1-1 instead of
2-1...

"Suzanne S. Barnhill" wrote:

Did you include Heading 6 as part of your outline numbering
scheme?

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
I wish I could send the document, but it's proprietary to my
company
and I
can't. I'm having the same problem with Appendix B. The page
numbers
in
Appendix A are fine (A-1, A-2, etc), but the page numbers in
Appendix
B
start
at A-1. I've followed Shana Kelly's suggestion to change the
Chapter
Starts
with Style box to choose Heading 6.

"Suzanne S. Barnhill" wrote:

If you'd like to send me a portion of the problem doc, I'll
take
a
look.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in message
...
The Chapter 1 title uses "Heading 1" style, and is
preceded by
a
section
titled "References and Drawings" which uses the "Title
Centered"
style.
There is a page number and section break (next page)
between
them,
but
deleting either or both didn't help. I didn't see any
empty
paragraphs
between the sections.

In the Page Number Format dialogue box, the "chapter
starts
with
style"
is
Heading 1.

I forgot to mention I'm using Word 2003.

"Suzanne S. Barnhill" wrote:

If the style used for the chapter numbering is part of an
outline-numbered
list, make sure you don't have any lower-level heads
preceding
"Chapter
1."
Also check to make sure that you don't have any empty
paragraphs
or
page
breaks before "Chapter 1" formatted with the heading
style it
uses.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Randy" wrote in
message
...
I have a document with several chapters, each seperated
by
section
breaks.
The page numbering starts over in all chapters but one.
the
numbering
is
2-1,
2-2, 3-1, etc.

The chapter that won't restart is Chapter 1, which
follows
some
frontmatter.
The frontmatter page numbers are numbered correctly (i,
ii,
iii,
etc).
The
first page of Chapter 1 begins with 2-1 instead of 1-1.
I
have
section
breaks
before and after the chapter. All of the other chapters
restart
the
numbering
correctly except this one.

I've opened the footer in Chapter 1 that contains the
page
number
and
changed the page number setting to "start at 1", but
this
doesn't
help.
"Link
to previous" is not selected.

Any help would be much appreciated.

Thanks,

Randy