I recently purchased an Epson Stylus Photo R300 printer which has a USB
interface. I can print from all of my applications except Word 2002. The
Print Status window indicates the job is 'spooling', but it never finishes.
I have the latest driver from Epson. I also have another printer which has a
parallel interface and that one works fine. Anybody have any ideas?

I am having the same trouble. Have you found an answer to the problem?

"RichZ" wrote:

I recently purchased an Epson Stylus Photo R300 printer which has a USB
interface. I can print from all of my applications except Word 2002. The
Print Status window indicates the job is 'spooling', but it never finishes.
I have the latest driver from Epson. I also have another printer which has a
parallel interface and that one works fine. Anybody have any ideas?

No, not yet.

"DorothyB" wrote:

I am having the same trouble. Have you found an answer to the problem?

"RichZ" wrote:

I recently purchased an Epson Stylus Photo R300 printer which has a USB
interface. I can print from all of my applications except Word 2002. The
Print Status window indicates the job is 'spooling', but it never finishes.
I have the latest driver from Epson. I also have another printer which has a
parallel interface and that one works fine. Anybody have any ideas?

FYI, I have contacted Epson and they were extremely helpful, but ultimately
we determined that the problem is with Word2002. I removed and re-installed
the Word program on the off chance something in it had corrupted. This
didn't help. I doubled checked and all the patches and updates for Word2002
have been installed, so that is not the issue. I also contacted Dell, who
referred sent me to the printer "specialist" (and I use that term lightly)
who was not at all helpful. I finally broke down and wrote microsoft and am
currently awaiting their reply. Printer works great. Word2002 has always
been a little flaky. I will let you know what microsoft has to say.

"RichZ" wrote:

No, not yet.

"DorothyB" wrote:

I am having the same trouble. Have you found an answer to the problem?

"RichZ" wrote:

I recently purchased an Epson Stylus Photo R300 printer which has a USB
interface. I can print from all of my applications except Word 2002. The
Print Status window indicates the job is 'spooling', but it never finishes.
I have the latest driver from Epson. I also have another printer which has a
parallel interface and that one works fine. Anybody have any ideas?

Thanks for the info. I've gone through the same process and even talked to
the Dell software specialists, but not much help. I've asked Epson to
actually try to use Word 2002 with the R300 printer to verify the problem.
Perhaps they might be able to do something with their driver if they see the
problem or work with Microsoft themselves as a developer. Let me know what
you hear from Microsoft and I'll let you know if Epson comes up with anything.

"DorothyB" wrote:

FYI, I have contacted Epson and they were extremely helpful, but ultimately
we determined that the problem is with Word2002. I removed and re-installed
the Word program on the off chance something in it had corrupted. This
didn't help. I doubled checked and all the patches and updates for Word2002
have been installed, so that is not the issue. I also contacted Dell, who
referred sent me to the printer "specialist" (and I use that term lightly)
who was not at all helpful. I finally broke down and wrote microsoft and am
currently awaiting their reply. Printer works great. Word2002 has always
been a little flaky. I will let you know what microsoft has to say.

"RichZ" wrote:

No, not yet.

"DorothyB" wrote:

I am having the same trouble. Have you found an answer to the problem?

"RichZ" wrote:

I recently purchased an Epson Stylus Photo R300 printer which has a USB
interface. I can print from all of my applications except Word 2002. The
Print Status window indicates the job is 'spooling', but it never finishes.
I have the latest driver from Epson. I also have another printer which has a
parallel interface and that one works fine. Anybody have any ideas?

Not much help to you, but it should be noted that Word places great demands
on the printer driver which it uses to format and print the document.
Ultimately the problem will almost certainly lie with the printer driver and
until Epson updates the driver to produce a certified Windows driver I
suspect you are going to have problems. A good place to start would be to
check that you have the latest driver installed -
http://esupport.epson-europe.com/Sof...609E8BB5116740
I can almost guarantee that Microsoft will refer you back to Epson

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org




RichZ wrote:
Thanks for the info. I've gone through the same process and even
talked to
the Dell software specialists, but not much help. I've asked Epson to
actually try to use Word 2002 with the R300 printer to verify the
problem.
Perhaps they might be able to do something with their driver if they
see the
problem or work with Microsoft themselves as a developer. Let me
know what
you hear from Microsoft and I'll let you know if Epson comes up with
anything.

"DorothyB" wrote:

FYI, I have contacted Epson and they were extremely helpful, but
ultimately
we determined that the problem is with Word2002. I removed and
re-installed
the Word program on the off chance something in it had corrupted.
This
didn't help. I doubled checked and all the patches and updates for
Word2002
have been installed, so that is not the issue. I also contacted
Dell, who
referred sent me to the printer "specialist" (and I use that term
lightly)
who was not at all helpful. I finally broke down and wrote
microsoft and am currently awaiting their reply. Printer works
great. Word2002 has always
been a little flaky. I will let you know what microsoft has to say.

"RichZ" wrote:

No, not yet.

"DorothyB" wrote:

I am having the same trouble. Have you found an answer to the
problem?

"RichZ" wrote:

I recently purchased an Epson Stylus Photo R300 printer which has
a USB interface. I can print from all of my applications except
Word 2002. The Print Status window indicates the job is
'spooling', but it never finishes. I have the latest driver from
Epson. I also have another printer which has a parallel
interface and that one works fine. Anybody have any ideas?

Well, I finally was able to print from Word 2002 using my Epson Stylus Photo
R300 printer! Basically, what I did was clean out the Windows XP Spooler
directory and reloaded the driver. The process I followed was:
1. Go to Control Panel then Printer & Fax, and delete all printers.
2. Delete all Epson software from the system.
3. Backup the \WINDOWS\SYSTEM32\SPOOL directory (just in case you need to
recover something).
3. Delete everything under the \WINDOWS\SYSTEM32\SPOOL directory. There was
one file I couldn't delete because the system said another application was
using it.
4. Reinstall the Epson R300 Driver and software.
If you can print from your other applications, you probably already did the
next step.
5. Go to the printer properties form via the Control Panel and Printer & Fax
and right clicking the Epson printer. Select the Advanced tab and uncheck
'Enable Advanced Printer Function'.

Hope this helps others with a similar problem.

"Graham Mayor" wrote:

Not much help to you, but it should be noted that Word places great demands
on the printer driver which it uses to format and print the document.
Ultimately the problem will almost certainly lie with the printer driver and
until Epson updates the driver to produce a certified Windows driver I
suspect you are going to have problems. A good place to start would be to
check that you have the latest driver installed -
http://esupport.epson-europe.com/Sof...609E8BB5116740
I can almost guarantee that Microsoft will refer you back to Epson

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org




RichZ wrote:
Thanks for the info. I've gone through the same process and even
talked to
the Dell software specialists, but not much help. I've asked Epson to
actually try to use Word 2002 with the R300 printer to verify the
problem.
Perhaps they might be able to do something with their driver if they
see the
problem or work with Microsoft themselves as a developer. Let me
know what
you hear from Microsoft and I'll let you know if Epson comes up with
anything.

"DorothyB" wrote:

FYI, I have contacted Epson and they were extremely helpful, but
ultimately
we determined that the problem is with Word2002. I removed and
re-installed
the Word program on the off chance something in it had corrupted.
This
didn't help. I doubled checked and all the patches and updates for
Word2002
have been installed, so that is not the issue. I also contacted
Dell, who
referred sent me to the printer "specialist" (and I use that term
lightly)
who was not at all helpful. I finally broke down and wrote
microsoft and am currently awaiting their reply. Printer works
great. Word2002 has always
been a little flaky. I will let you know what microsoft has to say.

"RichZ" wrote:

No, not yet.

"DorothyB" wrote:

I am having the same trouble. Have you found an answer to the
problem?

"RichZ" wrote:

I recently purchased an Epson Stylus Photo R300 printer which has
a USB interface. I can print from all of my applications except
Word 2002. The Print Status window indicates the job is
'spooling', but it never finishes. I have the latest driver from
Epson. I also have another printer which has a parallel
interface and that one works fine. Anybody have any ideas?

Thanks. I will give that a shot. I never did get a response from Microsoft.
Dell promised to have a specialist call, but never did. My solution has
been to convert my files to Wordperfect 11 and print from that program. I'll
let you know if I here anything else.


"RichZ" wrote:

Well, I finally was able to print from Word 2002 using my Epson Stylus Photo
R300 printer! Basically, what I did was clean out the Windows XP Spooler
directory and reloaded the driver. The process I followed was:
1. Go to Control Panel then Printer & Fax, and delete all printers.
2. Delete all Epson software from the system.
3. Backup the \WINDOWS\SYSTEM32\SPOOL directory (just in case you need to
recover something).
3. Delete everything under the \WINDOWS\SYSTEM32\SPOOL directory. There was
one file I couldn't delete because the system said another application was
using it.
4. Reinstall the Epson R300 Driver and software.
If you can print from your other applications, you probably already did the
next step.
5. Go to the printer properties form via the Control Panel and Printer & Fax
and right clicking the Epson printer. Select the Advanced tab and uncheck
'Enable Advanced Printer Function'.

Hope this helps others with a similar problem.

"Graham Mayor" wrote:

Not much help to you, but it should be noted that Word places great demands
on the printer driver which it uses to format and print the document.
Ultimately the problem will almost certainly lie with the printer driver and
until Epson updates the driver to produce a certified Windows driver I
suspect you are going to have problems. A good place to start would be to
check that you have the latest driver installed -
http://esupport.epson-europe.com/Sof...609E8BB5116740
I can almost guarantee that Microsoft will refer you back to Epson

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org




RichZ wrote:
Thanks for the info. I've gone through the same process and even
talked to
the Dell software specialists, but not much help. I've asked Epson to
actually try to use Word 2002 with the R300 printer to verify the
problem.
Perhaps they might be able to do something with their driver if they
see the
problem or work with Microsoft themselves as a developer. Let me
know what
you hear from Microsoft and I'll let you know if Epson comes up with
anything.

"DorothyB" wrote:

FYI, I have contacted Epson and they were extremely helpful, but
ultimately
we determined that the problem is with Word2002. I removed and
re-installed
the Word program on the off chance something in it had corrupted.
This
didn't help. I doubled checked and all the patches and updates for
Word2002
have been installed, so that is not the issue. I also contacted
Dell, who
referred sent me to the printer "specialist" (and I use that term
lightly)
who was not at all helpful. I finally broke down and wrote
microsoft and am currently awaiting their reply. Printer works
great. Word2002 has always
been a little flaky. I will let you know what microsoft has to say.

"RichZ" wrote:

No, not yet.

"DorothyB" wrote:

I am having the same trouble. Have you found an answer to the
problem?

"RichZ" wrote:

I recently purchased an Epson Stylus Photo R300 printer which has
a USB interface. I can print from all of my applications except
Word 2002. The Print Status window indicates the job is
'spooling', but it never finishes. I have the latest driver from
Epson. I also have another printer which has a parallel
interface and that one works fine. Anybody have any ideas?

I called Dell and they weren't much help. I had already tried everything
they suggested except reloading my operating system, and it cost me $35
dollars for the software support. There warranty and service is primarily
for hardware. Software is only covered for 21 days. Big deal!!

"DorothyB" wrote:

Thanks. I will give that a shot. I never did get a response from Microsoft.
Dell promised to have a specialist call, but never did. My solution has
been to convert my files to Wordperfect 11 and print from that program. I'll
let you know if I here anything else.


"RichZ" wrote:

Well, I finally was able to print from Word 2002 using my Epson Stylus Photo
R300 printer! Basically, what I did was clean out the Windows XP Spooler
directory and reloaded the driver. The process I followed was:
1. Go to Control Panel then Printer & Fax, and delete all printers.
2. Delete all Epson software from the system.
3. Backup the \WINDOWS\SYSTEM32\SPOOL directory (just in case you need to
recover something).
3. Delete everything under the \WINDOWS\SYSTEM32\SPOOL directory. There was
one file I couldn't delete because the system said another application was
using it.
4. Reinstall the Epson R300 Driver and software.
If you can print from your other applications, you probably already did the
next step.
5. Go to the printer properties form via the Control Panel and Printer & Fax
and right clicking the Epson printer. Select the Advanced tab and uncheck
'Enable Advanced Printer Function'.

Hope this helps others with a similar problem.

"Graham Mayor" wrote:

Not much help to you, but it should be noted that Word places great demands
on the printer driver which it uses to format and print the document.
Ultimately the problem will almost certainly lie with the printer driver and
until Epson updates the driver to produce a certified Windows driver I
suspect you are going to have problems. A good place to start would be to
check that you have the latest driver installed -
http://esupport.epson-europe.com/Sof...609E8BB5116740
I can almost guarantee that Microsoft will refer you back to Epson

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org




RichZ wrote:
Thanks for the info. I've gone through the same process and even
talked to
the Dell software specialists, but not much help. I've asked Epson to
actually try to use Word 2002 with the R300 printer to verify the
problem.
Perhaps they might be able to do something with their driver if they
see the
problem or work with Microsoft themselves as a developer. Let me
know what
you hear from Microsoft and I'll let you know if Epson comes up with
anything.

"DorothyB" wrote:

FYI, I have contacted Epson and they were extremely helpful, but
ultimately
we determined that the problem is with Word2002. I removed and
re-installed
the Word program on the off chance something in it had corrupted.
This
didn't help. I doubled checked and all the patches and updates for
Word2002
have been installed, so that is not the issue. I also contacted
Dell, who
referred sent me to the printer "specialist" (and I use that term
lightly)
who was not at all helpful. I finally broke down and wrote
microsoft and am currently awaiting their reply. Printer works
great. Word2002 has always
been a little flaky. I will let you know what microsoft has to say.

"RichZ" wrote:

No, not yet.

"DorothyB" wrote:

I am having the same trouble. Have you found an answer to the
problem?

"RichZ" wrote:

I recently purchased an Epson Stylus Photo R300 printer which has
a USB interface. I can print from all of my applications except
Word 2002. The Print Status window indicates the job is
'spooling', but it never finishes. I have the latest driver from
Epson. I also have another printer which has a parallel
interface and that one works fine. Anybody have any ideas?

I have had the same problem.
Today I downloaded a new driver from Epson's web site and this fix it good
style
Download file
Epson 21540eu.exe

Good Luck DaviD

"RichZ" wrote:

I recently purchased an Epson Stylus Photo R300 printer which has a USB
interface. I can print from all of my applications except Word 2002. The
Print Status window indicates the job is 'spooling', but it never finishes.
I have the latest driver from Epson. I also have another printer which has a
parallel interface and that one works fine. Anybody have any ideas?