[Martin C]

We are using Office 2003 at work. In the windows header bar of MS Word, the
filename is given. Is it possible to get this to provide the full path?
Quite often I have to deal with multiple versions of a particular document
(stored in different locations). It would be very useful to be able to see
which version I am currently viewing. Just the filename is not sufficient in
this case.

I am sure that I have seen the solution to this problem before somewhere,
but it may have been via a 3rd party add on, used on an older version of
Office.

Thanks for any help you can provide.

Martin

[Martin C]

It's ok, I found a good site that showed how to do this via macros.

For anyone that is interested, look at the following, which so far seems to
be working ok.

http://wordtips.vitalnews.com/Pages/...s_in_Word.html

Martin


"Martin C" wrote in message
...
We are using Office 2003 at work. In the windows header bar of MS Word,
the filename is given. Is it possible to get this to provide the full
path? Quite often I have to deal with multiple versions of a particular
document (stored in different locations). It would be very useful to be
able to see which version I am currently viewing. Just the filename is not
sufficient in this case.

I am sure that I have seen the solution to this problem before somewhere,
but it may have been via a 3rd party add on, used on an older version of
Office.

Thanks for any help you can provide.

Martin

[Terry Farrell]

Or even better http://word.mvps.org/faqs/tblsfldsfm...teFilename.htm

--
Terry Farrell - MSWord MVP

"Martin C" wrote in message
...
It's ok, I found a good site that showed how to do this via macros.

For anyone that is interested, look at the following, which so far seems
to be working ok.

http://wordtips.vitalnews.com/Pages/...s_in_Word.html

Martin


"Martin C" wrote in message
...
We are using Office 2003 at work. In the windows header bar of MS Word,
the filename is given. Is it possible to get this to provide the full
path? Quite often I have to deal with multiple versions of a particular
document (stored in different locations). It would be very useful to be
able to see which version I am currently viewing. Just the filename is
not sufficient in this case.

I am sure that I have seen the solution to this problem before somewhere,
but it may have been via a 3rd party add on, used on an older version of
Office.

Thanks for any help you can provide.

Martin

[Reitanos]

Why not use Insert/Field... select FileName and check the Add Path to
Filename box?


On May 20, 6:49 am, "Terry Farrell" wrote:
Or even betterhttp://word.mvps.org/faqs/tblsfldsfms/UpdateFilename.htm

--
Terry Farrell - MSWord MVP

"Martin C" wrote in message

...

It's ok, I found a good site that showed how to do this via macros.

For anyone that is interested, look at the following, which so far seems
to be working ok.

http://wordtips.vitalnews.com/Pages/...s_in_Word.html

Martin

"Martin C" wrote in message
...
We are using Office 2003 at work. In the windows header bar of MS Word,
the filename is given. Is it possible to get this to provide the full
path? Quite often I have to deal with multiple versions of a particular
document (stored in different locations). It would be very useful to be
able to see which version I am currently viewing. Just the filename is
not sufficient in this case.

I am sure that I have seen the solution to this problem before somewhere,
but it may have been via a 3rd party add on, used on an older version of
Office.

Thanks for any help you can provide.

Martin

[Jay Freedman]

Why not? Because that puts the information in the document itself, not in
the title bar as requested...

Just to throw one more possibility into the mix, you can open the Web
toolbar, and hold Ctrl+Alt while you drag a copy of the address dropdown
from that toolbar to the right end of the menu bar. When a Word document is
open, that dropdown shows the path and filename. In Word 2007, the same
dropdown can be put on the Quick Access Toolbar by selecting the "Commands
Not in the Ribbon" category in the Customize dialog and adding the Document
Location item.

--
Regards,
Jay Freedman
Microsoft Word MVP FAQ: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

Reitanos wrote:
Why not use Insert/Field... select FileName and check the Add Path to
Filename box?


On May 20, 6:49 am, "Terry Farrell" wrote:
Or even
betterhttp://word.mvps.org/faqs/tblsfldsfms/UpdateFilename.htm

--
Terry Farrell - MSWord MVP

"Martin C" wrote in message

...

It's ok, I found a good site that showed how to do this via macros.

For anyone that is interested, look at the following, which so far
seems to be working ok.

http://wordtips.vitalnews.com/Pages/...s_in_Word.html

Martin

"Martin C" wrote in message
...
We are using Office 2003 at work. In the windows header bar of MS
Word, the filename is given. Is it possible to get this to provide
the full path? Quite often I have to deal with multiple versions
of a particular document (stored in different locations). It would
be very useful to be able to see which version I am currently
viewing. Just the filename is not sufficient in this case.

I am sure that I have seen the solution to this problem before
somewhere, but it may have been via a 3rd party add on, used on an
older version of Office.

Thanks for any help you can provide.

Martin

[Reitanos]

My bad. I thought "header bar" was header not the title bar.

On May 20, 11:19 am, "Jay Freedman" wrote:
Why not? Because that puts the information in the document itself, not in
the title bar as requested...

Just to throw one more possibility into the mix, you can open the Web
toolbar, and hold Ctrl+Alt while you drag a copy of the address dropdown
from that toolbar to the right end of the menu bar. When a Word document is
open, that dropdown shows the path and filename. In Word 2007, the same
dropdown can be put on the Quick Access Toolbar by selecting the "Commands
Not in the Ribbon" category in the Customize dialog and adding the Document
Location item.

--
Regards,
Jay Freedman
Microsoft Word MVP FAQ:http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

Reitanos wrote:
Why not use Insert/Field... select FileName and check the Add Path to
Filename box?

On May 20, 6:49 am, "Terry Farrell" wrote:
Or even
betterhttp://word.mvps.org/faqs/tblsfldsfms/UpdateFilename.htm

--
Terry Farrell - MSWord MVP

"Martin C" wrote in message

...

It's ok, I found a good site that showed how to do this via macros.

For anyone that is interested, look at the following, which so far
seems to be working ok.

http://wordtips.vitalnews.com/Pages/...s_in_Word.html

Martin

"Martin C" wrote in message
...
We are using Office 2003 at work. In the windows header bar of MS
Word, the filename is given. Is it possible to get this to provide
the full path? Quite often I have to deal with multiple versions
of a particular document (stored in different locations). It would
be very useful to be able to see which version I am currently
viewing. Just the filename is not sufficient in this case.

I am sure that I have seen the solution to this problem before
somewhere, but it may have been via a 3rd party add on, used on an
older version of Office.

Thanks for any help you can provide.

Martin

[Jay Freedman]

Here, I'll lend you my can of crystal-ball cleaner. ;-) In these groups, you
really need it.

--
Jay

On Tue, 20 May 2008 08:42:59 -0700 (PDT), Reitanos
wrote:

My bad. I thought "header bar" was header not the title bar.

On May 20, 11:19 am, "Jay Freedman" wrote:
Why not? Because that puts the information in the document itself, not in
the title bar as requested...

Just to throw one more possibility into the mix, you can open the Web
toolbar, and hold Ctrl+Alt while you drag a copy of the address dropdown
from that toolbar to the right end of the menu bar. When a Word document is
open, that dropdown shows the path and filename. In Word 2007, the same
dropdown can be put on the Quick Access Toolbar by selecting the "Commands
Not in the Ribbon" category in the Customize dialog and adding the Document
Location item.

--
Regards,
Jay Freedman
Microsoft Word MVP FAQ:http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

Reitanos wrote:
Why not use Insert/Field... select FileName and check the Add Path to
Filename box?

On May 20, 6:49 am, "Terry Farrell" wrote:
Or even
betterhttp://word.mvps.org/faqs/tblsfldsfms/UpdateFilename.htm

--
Terry Farrell - MSWord MVP

"Martin C" wrote in message

...

It's ok, I found a good site that showed how to do this via macros.

For anyone that is interested, look at the following, which so far
seems to be working ok.

http://wordtips.vitalnews.com/Pages/...s_in_Word.html

Martin

"Martin C" wrote in message
...
We are using Office 2003 at work. In the windows header bar of MS
Word, the filename is given. Is it possible to get this to provide
the full path? Quite often I have to deal with multiple versions
of a particular document (stored in different locations). It would
be very useful to be able to see which version I am currently
viewing. Just the filename is not sufficient in this case.

I am sure that I have seen the solution to this problem before
somewhere, but it may have been via a 3rd party add on, used on an
older version of Office.

Thanks for any help you can provide.

Martin

[Martin C]

My appologies to all.

I should have said 'title bar' but could not think of the name for it. I
thought 'Windows' header bar would have been clear enough, to distinguish it
from the Word header. The words Window and Bar were supposed to be the
distinction, but I can see the problem. Sorry again.

Martin


"Jay Freedman" wrote in message
news
Here, I'll lend you my can of crystal-ball cleaner. ;-) In these groups,
you
really need it.

--
Jay

On Tue, 20 May 2008 08:42:59 -0700 (PDT), Reitanos
wrote:

My bad. I thought "header bar" was header not the title bar.

On May 20, 11:19 am, "Jay Freedman" wrote:
Why not? Because that puts the information in the document itself, not
in
the title bar as requested...

Just to throw one more possibility into the mix, you can open the Web
toolbar, and hold Ctrl+Alt while you drag a copy of the address dropdown
from that toolbar to the right end of the menu bar. When a Word document
is
open, that dropdown shows the path and filename. In Word 2007, the same
dropdown can be put on the Quick Access Toolbar by selecting the
"Commands
Not in the Ribbon" category in the Customize dialog and adding the
Document
Location item.

--
Regards,
Jay Freedman
Microsoft Word MVP FAQ:http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so
all may benefit.

Reitanos wrote:
Why not use Insert/Field... select FileName and check the Add Path to
Filename box?

On May 20, 6:49 am, "Terry Farrell" wrote:
Or even
betterhttp://word.mvps.org/faqs/tblsfldsfms/UpdateFilename.htm

--
Terry Farrell - MSWord MVP

"Martin C" wrote in message

...

It's ok, I found a good site that showed how to do this via macros.

For anyone that is interested, look at the following, which so far
seems to be working ok.

http://wordtips.vitalnews.com/Pages/...s_in_Word.html

Martin

"Martin C" wrote in message
...
We are using Office 2003 at work. In the windows header bar of MS
Word, the filename is given. Is it possible to get this to provide
the full path? Quite often I have to deal with multiple versions
of a particular document (stored in different locations). It would
be very useful to be able to see which version I am currently
viewing. Just the filename is not sufficient in this case.

I am sure that I have seen the solution to this problem before
somewhere, but it may have been via a 3rd party add on, used on an
older version of Office.

Thanks for any help you can provide.

Martin