Home |
Search |
Today's Posts |
#1
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Text Over Picture
I scanned a vendor form as a .jpg and inserted it as a full page into Win07.
I "sent the picture to the back." I want to print over the pic (fill out the form), print it and send it back to the vendor. I can't move the cursor with the mouse, but it will respond to the tab, space and left-arrow keys. I would like to be able to type over the pic in the normal fashion of entering text. Any solution or suggestion? PS: I didn't scan by OCR because the form has graphics and bar codes, etc. |
#2
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Text Over Picture
Hi Mike,
You could put the image into the document header, rather than the body. Then you should be able to type over it in the normal manner. -- Cheers macropod [MVP - Microsoft Word] "Mike" wrote in message ... I scanned a vendor form as a .jpg and inserted it as a full page into Win07. I "sent the picture to the back." I want to print over the pic (fill out the form), print it and send it back to the vendor. I can't move the cursor with the mouse, but it will respond to the tab, space and left-arrow keys. I would like to be able to type over the pic in the normal fashion of entering text. Any solution or suggestion? PS: I didn't scan by OCR because the form has graphics and bar codes, etc. |
#3
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Text Over Picture
Thanks macropod,
I tried putting the image in a header, but it doesn't work. I just get the "grab" icon when I click any place in the image. I don't know why "text through image" and "send behind text" don't do the job. I have been able to overtype the form just as you would do with a typewriter: enter key, tab keys, space bar and alpha/num keys. But I can't just put the cursor anywhere on the form and type - again, I just get the "grab" cursor anywhere I click with the mouse. To get to a spot, say in the middle of the form, I have to hit enter key (cursor starts at top left of the form) 15 or 20 times to get it to the line I want and then tab or space over to the location on that line. Should be and interesting experiment for someone to test. Just scan any 8 1/2 by 11 paper and try to get it to work. Thanks again "macropod" wrote in message ... Hi Mike, You could put the image into the document header, rather than the body. Then you should be able to type over it in the normal manner. -- Cheers macropod [MVP - Microsoft Word] "Mike" wrote in message ... I scanned a vendor form as a .jpg and inserted it as a full page into Win07. I "sent the picture to the back." I want to print over the pic (fill out the form), print it and send it back to the vendor. I can't move the cursor with the mouse, but it will respond to the tab, space and left-arrow keys. I would like to be able to type over the pic in the normal fashion of entering text. Any solution or suggestion? PS: I didn't scan by OCR because the form has graphics and bar codes, etc. |
#4
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Text Over Picture
Think about it: If you didn't have the picture behind the text, you wouldn't
be able to place the cursor anywhere on the page and type, either. And that's what you're doing--just entering text in a document that happens to have a background picture. Either enable (shudder) "Click and type," which will allow you to type anywhere (double-click where you want to type), or use normal text placement techniques (tabs, indents, Space Before), or insert text boxes or frames to contain the text. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA "Mike" wrote in message ... Thanks macropod, I tried putting the image in a header, but it doesn't work. I just get the "grab" icon when I click any place in the image. I don't know why "text through image" and "send behind text" don't do the job. I have been able to overtype the form just as you would do with a typewriter: enter key, tab keys, space bar and alpha/num keys. But I can't just put the cursor anywhere on the form and type - again, I just get the "grab" cursor anywhere I click with the mouse. To get to a spot, say in the middle of the form, I have to hit enter key (cursor starts at top left of the form) 15 or 20 times to get it to the line I want and then tab or space over to the location on that line. Should be and interesting experiment for someone to test. Just scan any 8 1/2 by 11 paper and try to get it to work. Thanks again "macropod" wrote in message ... Hi Mike, You could put the image into the document header, rather than the body. Then you should be able to type over it in the normal manner. -- Cheers macropod [MVP - Microsoft Word] "Mike" wrote in message ... I scanned a vendor form as a .jpg and inserted it as a full page into Win07. I "sent the picture to the back." I want to print over the pic (fill out the form), print it and send it back to the vendor. I can't move the cursor with the mouse, but it will respond to the tab, space and left-arrow keys. I would like to be able to type over the pic in the normal fashion of entering text. Any solution or suggestion? PS: I didn't scan by OCR because the form has graphics and bar codes, etc. |
#5
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Text Over Picture
Thanks, Suzanne, for clarifying the "behind text" feature.
"Click and Type" doesn't make any difference. The mouse cursor is the "grab" icon. When I double-click, nothing changes. "Click and Type" is enabled by default at installation and has been active the whole time I've been trying to get this to work. "Suzanne S. Barnhill" wrote in message ... Think about it: If you didn't have the picture behind the text, you wouldn't be able to place the cursor anywhere on the page and type, either. And that's what you're doing--just entering text in a document that happens to have a background picture. Either enable (shudder) "Click and type," which will allow you to type anywhere (double-click where you want to type), or use normal text placement techniques (tabs, indents, Space Before), or insert text boxes or frames to contain the text. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA "Mike" wrote in message ... Thanks macropod, I tried putting the image in a header, but it doesn't work. I just get the "grab" icon when I click any place in the image. I don't know why "text through image" and "send behind text" don't do the job. I have been able to overtype the form just as you would do with a typewriter: enter key, tab keys, space bar and alpha/num keys. But I can't just put the cursor anywhere on the form and type - again, I just get the "grab" cursor anywhere I click with the mouse. To get to a spot, say in the middle of the form, I have to hit enter key (cursor starts at top left of the form) 15 or 20 times to get it to the line I want and then tab or space over to the location on that line. Should be and interesting experiment for someone to test. Just scan any 8 1/2 by 11 paper and try to get it to work. Thanks again "macropod" wrote in message ... Hi Mike, You could put the image into the document header, rather than the body. Then you should be able to type over it in the normal manner. -- Cheers macropod [MVP - Microsoft Word] "Mike" wrote in message ... I scanned a vendor form as a .jpg and inserted it as a full page into Win07. I "sent the picture to the back." I want to print over the pic (fill out the form), print it and send it back to the vendor. I can't move the cursor with the mouse, but it will respond to the tab, space and left-arrow keys. I would like to be able to type over the pic in the normal fashion of entering text. Any solution or suggestion? PS: I didn't scan by OCR because the form has graphics and bar codes, etc. |
#6
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Text Over Picture
That's probably because, while the image is in the body of the document and is covering a blank area, there's no text for it to be
behind. Therefore, clicking over the image selects it. -- Cheers macropod [MVP - Microsoft Word] "Mike" wrote in message ... Thanks, Suzanne, for clarifying the "behind text" feature. "Click and Type" doesn't make any difference. The mouse cursor is the "grab" icon. When I double-click, nothing changes. "Click and Type" is enabled by default at installation and has been active the whole time I've been trying to get this to work. "Suzanne S. Barnhill" wrote in message ... Think about it: If you didn't have the picture behind the text, you wouldn't be able to place the cursor anywhere on the page and type, either. And that's what you're doing--just entering text in a document that happens to have a background picture. Either enable (shudder) "Click and type," which will allow you to type anywhere (double-click where you want to type), or use normal text placement techniques (tabs, indents, Space Before), or insert text boxes or frames to contain the text. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA "Mike" wrote in message ... Thanks macropod, I tried putting the image in a header, but it doesn't work. I just get the "grab" icon when I click any place in the image. I don't know why "text through image" and "send behind text" don't do the job. I have been able to overtype the form just as you would do with a typewriter: enter key, tab keys, space bar and alpha/num keys. But I can't just put the cursor anywhere on the form and type - again, I just get the "grab" cursor anywhere I click with the mouse. To get to a spot, say in the middle of the form, I have to hit enter key (cursor starts at top left of the form) 15 or 20 times to get it to the line I want and then tab or space over to the location on that line. Should be and interesting experiment for someone to test. Just scan any 8 1/2 by 11 paper and try to get it to work. Thanks again "macropod" wrote in message ... Hi Mike, You could put the image into the document header, rather than the body. Then you should be able to type over it in the normal manner. -- Cheers macropod [MVP - Microsoft Word] "Mike" wrote in message ... I scanned a vendor form as a .jpg and inserted it as a full page into Win07. I "sent the picture to the back." I want to print over the pic (fill out the form), print it and send it back to the vendor. I can't move the cursor with the mouse, but it will respond to the tab, space and left-arrow keys. I would like to be able to type over the pic in the normal fashion of entering text. Any solution or suggestion? PS: I didn't scan by OCR because the form has graphics and bar codes, etc. |
#7
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Text Over Picture - Solved
You're right. I solved it by inserting a transparent rectangular autoshape
the size of the form and putting the pic behind it. Still works like a text box-you've got to have an area covered with text to move the cursor to it. Thought about making a macro to fill the transparent autoshape with blanks. Then I could move the cursor anywhere on the page. "macropod" wrote in message ... That's probably because, while the image is in the body of the document and is covering a blank area, there's no text for it to be behind. Therefore, clicking over the image selects it. -- Cheers macropod [MVP - Microsoft Word] "Mike" wrote in message ... Thanks, Suzanne, for clarifying the "behind text" feature. "Click and Type" doesn't make any difference. The mouse cursor is the "grab" icon. When I double-click, nothing changes. "Click and Type" is enabled by default at installation and has been active the whole time I've been trying to get this to work. "Suzanne S. Barnhill" wrote in message ... Think about it: If you didn't have the picture behind the text, you wouldn't be able to place the cursor anywhere on the page and type, either. And that's what you're doing--just entering text in a document that happens to have a background picture. Either enable (shudder) "Click and type," which will allow you to type anywhere (double-click where you want to type), or use normal text placement techniques (tabs, indents, Space Before), or insert text boxes or frames to contain the text. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA "Mike" wrote in message ... Thanks macropod, I tried putting the image in a header, but it doesn't work. I just get the "grab" icon when I click any place in the image. I don't know why "text through image" and "send behind text" don't do the job. I have been able to overtype the form just as you would do with a typewriter: enter key, tab keys, space bar and alpha/num keys. But I can't just put the cursor anywhere on the form and type - again, I just get the "grab" cursor anywhere I click with the mouse. To get to a spot, say in the middle of the form, I have to hit enter key (cursor starts at top left of the form) 15 or 20 times to get it to the line I want and then tab or space over to the location on that line. Should be and interesting experiment for someone to test. Just scan any 8 1/2 by 11 paper and try to get it to work. Thanks again "macropod" wrote in message ... Hi Mike, You could put the image into the document header, rather than the body. Then you should be able to type over it in the normal manner. -- Cheers macropod [MVP - Microsoft Word] "Mike" wrote in message ... I scanned a vendor form as a .jpg and inserted it as a full page into Win07. I "sent the picture to the back." I want to print over the pic (fill out the form), print it and send it back to the vendor. I can't move the cursor with the mouse, but it will respond to the tab, space and left-arrow keys. I would like to be able to type over the pic in the normal fashion of entering text. Any solution or suggestion? PS: I didn't scan by OCR because the form has graphics and bar codes, etc. |
#8
Posted to microsoft.public.word.pagelayout
|
|||
|
|||
Text Over Picture - Update
I filled a transparent, page-size autoshape with blanks. Brought it forward.
Then saved it as a .dotx file. I open the .dotx file and insert my scanned ..jpg file. I can now click the cursor anywhere on the page and "X" a box, fill in text data, etc. Then I either fax the form back to the vendor or print if I need to. Will work for any form scanned as a picture file. "Mike" wrote in message ... You're right. I solved it by inserting a transparent rectangular autoshape the size of the form and putting the pic behind it. Still works like a text box-you've got to have an area covered with text to move the cursor to it. Thought about making a macro to fill the transparent autoshape with blanks. Then I could move the cursor anywhere on the page. "macropod" wrote in message ... That's probably because, while the image is in the body of the document and is covering a blank area, there's no text for it to be behind. Therefore, clicking over the image selects it. -- Cheers macropod [MVP - Microsoft Word] "Mike" wrote in message ... Thanks, Suzanne, for clarifying the "behind text" feature. "Click and Type" doesn't make any difference. The mouse cursor is the "grab" icon. When I double-click, nothing changes. "Click and Type" is enabled by default at installation and has been active the whole time I've been trying to get this to work. "Suzanne S. Barnhill" wrote in message ... Think about it: If you didn't have the picture behind the text, you wouldn't be able to place the cursor anywhere on the page and type, either. And that's what you're doing--just entering text in a document that happens to have a background picture. Either enable (shudder) "Click and type," which will allow you to type anywhere (double-click where you want to type), or use normal text placement techniques (tabs, indents, Space Before), or insert text boxes or frames to contain the text. -- Suzanne S. Barnhill Microsoft MVP (Word) Words into Type Fairhope, Alabama USA "Mike" wrote in message ... Thanks macropod, I tried putting the image in a header, but it doesn't work. I just get the "grab" icon when I click any place in the image. I don't know why "text through image" and "send behind text" don't do the job. I have been able to overtype the form just as you would do with a typewriter: enter key, tab keys, space bar and alpha/num keys. But I can't just put the cursor anywhere on the form and type - again, I just get the "grab" cursor anywhere I click with the mouse. To get to a spot, say in the middle of the form, I have to hit enter key (cursor starts at top left of the form) 15 or 20 times to get it to the line I want and then tab or space over to the location on that line. Should be and interesting experiment for someone to test. Just scan any 8 1/2 by 11 paper and try to get it to work. Thanks again "macropod" wrote in message ... Hi Mike, You could put the image into the document header, rather than the body. Then you should be able to type over it in the normal manner. -- Cheers macropod [MVP - Microsoft Word] "Mike" wrote in message ... I scanned a vendor form as a .jpg and inserted it as a full page into Win07. I "sent the picture to the back." I want to print over the pic (fill out the form), print it and send it back to the vendor. I can't move the cursor with the mouse, but it will respond to the tab, space and left-arrow keys. I would like to be able to type over the pic in the normal fashion of entering text. Any solution or suggestion? PS: I didn't scan by OCR because the form has graphics and bar codes, etc. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Text wrap round a picture inside a text box | Page Layout | |||
Wrapping text around picture inside a Text Box | Microsoft Word Help | |||
How do I change picture of text to text only in word? | Microsoft Word Help | |||
insert a picture into a Word text document and have the text wrap | Microsoft Word Help | |||
How do I insert text over a picture without losing the picture? | Microsoft Word Help |