[GAP@DOT]

I split a table into two tables. I did some other work elsewhwere in the
document, then I decided I wanted to re-connect the two tables. How do I
re-connect the two tables back into one table without using the undo button
and losing my other work?

[Stefan Blom]

Select and delete all of the contents between the tables; they will then
merge. (Strictly speaking, what merges the table is when you delete the
paragraph mark, ¶, between them.)

--
Stefan Blom
Microsoft Word MVP


"GAP@DOT" wrote in message
...
I split a table into two tables. I did some other work elsewhwere in the
document, then I decided I wanted to re-connect the two tables. How do I
re-connect the two tables back into one table without using the undo
button
and losing my other work?

[Fran[_2_]]

I don't use Word tables much, but I created a nice one-page "newsletter"
using it. I wanted to be able to copy and paste it as an email message.
However, I cannot seem to paste it into an Outlook Express New Message box
as it appears on my Word page. The top and bottom look great, but the
middle section is not in line and appears out to the right side and I am
unable to move it to its correct position.

Can someone with much more knowledge than mine please help me with this
problem? All assistance is appreciated. I did post this yesterday, but got
no response.
Thank you in advance,
Fran

"Stefan Blom" wrote in message
...
Select and delete all of the contents between the tables; they will then
merge. (Strictly speaking, what merges the table is when you delete the
paragraph mark, ¶, between them.)

--
Stefan Blom
Microsoft Word MVP


"GAP@DOT" wrote in message
...
I split a table into two tables. I did some other work elsewhwere in the
document, then I decided I wanted to re-connect the two tables. How do I
re-connect the two tables back into one table without using the undo
button
and losing my other work?

[GAP@DOT]

I used to be able to delete the ¶, but I must have something set differently
in this document because I can't delete it with the Delete key or even with
Ctrl+Delete. Something else is different too. When I split tables now, the
lower part jumps to the next page, and I can't get it back to the same page
as the upper part.

"Stefan Blom" wrote:

Select and delete all of the contents between the tables; they will then
merge. (Strictly speaking, what merges the table is when you delete the
paragraph mark, ¶, between them.)

--
Stefan Blom
Microsoft Word MVP


"GAP@DOT" wrote in message
...
I split a table into two tables. I did some other work elsewhwere in the
document, then I decided I wanted to re-connect the two tables. How do I
re-connect the two tables back into one table without using the undo
button
and losing my other work?

[GAP@DOT]

Making some progress. I highlighted the ¶, then went to Paragraph under
Format and saw the 'keep with next' box was not checked. When I checked it,
the lower part of the table came back to the same page as the upper part, but
I still can't delete the ¶.

"GAP@DOT" wrote:

I used to be able to delete the ¶, but I must have something set differently
in this document because I can't delete it with the Delete key or even with
Ctrl+Delete. Something else is different too. When I split tables now, the
lower part jumps to the next page, and I can't get it back to the same page
as the upper part.

"Stefan Blom" wrote:

Select and delete all of the contents between the tables; they will then
merge. (Strictly speaking, what merges the table is when you delete the
paragraph mark, ¶, between them.)

--
Stefan Blom
Microsoft Word MVP


"GAP@DOT" wrote in message
...
I split a table into two tables. I did some other work elsewhwere in the
document, then I decided I wanted to re-connect the two tables. How do I
re-connect the two tables back into one table without using the undo
button
and losing my other work?

[GAP@DOT]

Got it!! I had Track Changes on. When I turned it off, I could delete the
¶, and the table parts reconnected.
"GAP@DOT" wrote:

Making some progress. I highlighted the ¶, then went to Paragraph under
Format and saw the 'keep with next' box was not checked. When I checked it,
the lower part of the table came back to the same page as the upper part, but
I still can't delete the ¶.

"GAP@DOT" wrote:

I used to be able to delete the ¶, but I must have something set differently
in this document because I can't delete it with the Delete key or even with
Ctrl+Delete. Something else is different too. When I split tables now, the
lower part jumps to the next page, and I can't get it back to the same page
as the upper part.

"Stefan Blom" wrote:

Select and delete all of the contents between the tables; they will then
merge. (Strictly speaking, what merges the table is when you delete the
paragraph mark, ¶, between them.)

--
Stefan Blom
Microsoft Word MVP


"GAP@DOT" wrote in message
...
I split a table into two tables. I did some other work elsewhwere in the
document, then I decided I wanted to re-connect the two tables. How do I
re-connect the two tables back into one table without using the undo
button
and losing my other work?

[Stefan Blom]

I'm glad you got it sorted. Indeed, Track Changes can be a source of
confusion. :-(

For what it's worth, another common reason for trouble when merging tables
is that one of the tables has the "Text wrapping" set to "Around" (as
opposed to "None") in the Table Properties dialog box.

--
Stefan Blom
Microsoft Word MVP


"GAP@DOT" wrote in message
...
Got it!! I had Track Changes on. When I turned it off, I could delete
the
¶, and the table parts reconnected.
"GAP@DOT" wrote:

Making some progress. I highlighted the ¶, then went to Paragraph under
Format and saw the 'keep with next' box was not checked. When I checked
it,
the lower part of the table came back to the same page as the upper part,
but
I still can't delete the ¶.

"GAP@DOT" wrote:

I used to be able to delete the ¶, but I must have something set
differently
in this document because I can't delete it with the Delete key or even
with
Ctrl+Delete. Something else is different too. When I split tables
now, the
lower part jumps to the next page, and I can't get it back to the same
page
as the upper part.

"Stefan Blom" wrote:

Select and delete all of the contents between the tables; they will
then
merge. (Strictly speaking, what merges the table is when you delete
the
paragraph mark, ¶, between them.)

--
Stefan Blom
Microsoft Word MVP


"GAP@DOT" wrote in message
...
I split a table into two tables. I did some other work elsewhwere
in the
document, then I decided I wanted to re-connect the two tables.
How do I
re-connect the two tables back into one table without using the
undo
button
and losing my other work?

[GoHeels1]

For others who do a search on this topic:
The previous suggestions did not resolve my issue of re-connecting a table I
had split (in MS Office 2007). The simplest thing was just to:
-- go back to the first table and insert the number of rows I needed at the
bottom
-- copy the content from the second table
-- paste it into the new rows in the first table
-- delete the second table

Hope that helps.

"Stefan Blom" wrote:

I'm glad you got it sorted. Indeed, Track Changes can be a source of
confusion. :-(

For what it's worth, another common reason for trouble when merging tables
is that one of the tables has the "Text wrapping" set to "Around" (as
opposed to "None") in the Table Properties dialog box.

--
Stefan Blom
Microsoft Word MVP


"GAP@DOT" wrote in message
...
Got it!! I had Track Changes on. When I turned it off, I could delete
the
¶, and the table parts reconnected.
"GAP@DOT" wrote:

Making some progress. I highlighted the ¶, then went to Paragraph under
Format and saw the 'keep with next' box was not checked. When I checked
it,
the lower part of the table came back to the same page as the upper part,
but
I still can't delete the ¶.

"GAP@DOT" wrote:

I used to be able to delete the ¶, but I must have something set
differently
in this document because I can't delete it with the Delete key or even
with
Ctrl+Delete. Something else is different too. When I split tables
now, the
lower part jumps to the next page, and I can't get it back to the same
page
as the upper part.

"Stefan Blom" wrote:

Select and delete all of the contents between the tables; they will
then
merge. (Strictly speaking, what merges the table is when you delete
the
paragraph mark, ¶, between them.)

--
Stefan Blom
Microsoft Word MVP


"GAP@DOT" wrote in message
...
I split a table into two tables. I did some other work elsewhwere
in the
document, then I decided I wanted to re-connect the two tables.
How do I
re-connect the two tables back into one table without using the
undo
button
and losing my other work?