Reply
 
Thread Tools Display Modes
  #1   Report Post  
Enstrique
 
Posts: n/a
Default Users should be able to revert to 'old style' comments.

As an educator who uses computers in the classroom, I have to say that the
older style of comments had a great use in the classroom. I could type a
document, and insert a comment on a particular word. The 'old style' was to
highlight it in yellow. When the student moved their mouse over the word,
the comment will appear. This was a great way to insert vocabulary terms to
unfamilar words.

While the new comments are OK, I would like the option to change it to the
old format, instead of underlining the word, and placing the comment to the
right side of the page. Thank you.

----------------
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click "I Agree" in the message pane.

http://www.microsoft.com/office/comm...ocmanagemen t
  #2   Report Post  
Suzanne S. Barnhill
 
Posts: n/a
Default

This option is still available, but it depends on settings on the student's
computer, not yours. If he is using Word 2000 or earlier, this is what he
will see by default. In Word 2002 and 2003, ScreenTips are displayed in
Normal view. They are also displayed in Print Layout view if balloons are
disabled on the Track Changes tab of Tools | Options. (Of course, ScreenTips
must also be enabled on the View tab of Tools | Options.)

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Enstrique" wrote in message
...
As an educator who uses computers in the classroom, I have to say that the
older style of comments had a great use in the classroom. I could type a
document, and insert a comment on a particular word. The 'old style' was

to
highlight it in yellow. When the student moved their mouse over the word,
the comment will appear. This was a great way to insert vocabulary terms

to
unfamilar words.

While the new comments are OK, I would like the option to change it to the
old format, instead of underlining the word, and placing the comment to

the
right side of the page. Thank you.

----------------
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow

this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click "I Agree" in the message pane.


http://www.microsoft.com/office/comm...ocmanagemen t

  #3   Report Post  
Enstrique
 
Posts: n/a
Default

Is there a way that I can hide the comment while keeping the "balloon" pop
up?

"Suzanne S. Barnhill" wrote:

This option is still available, but it depends on settings on the student's
computer, not yours. If he is using Word 2000 or earlier, this is what he
will see by default. In Word 2002 and 2003, ScreenTips are displayed in
Normal view. They are also displayed in Print Layout view if balloons are
disabled on the Track Changes tab of Tools | Options. (Of course, ScreenTips
must also be enabled on the View tab of Tools | Options.)

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Enstrique" wrote in message
...
As an educator who uses computers in the classroom, I have to say that the
older style of comments had a great use in the classroom. I could type a
document, and insert a comment on a particular word. The 'old style' was

to
highlight it in yellow. When the student moved their mouse over the word,
the comment will appear. This was a great way to insert vocabulary terms

to
unfamilar words.

While the new comments are OK, I would like the option to change it to the
old format, instead of underlining the word, and placing the comment to

the
right side of the page. Thank you.

----------------
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow

this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click "I Agree" in the message pane.


http://www.microsoft.com/office/comm...ocmanagemen t


  #4   Report Post  
Suzanne S. Barnhill
 
Posts: n/a
Default

If balloons are disabled and the Reviewing Pane is not displayed, only the
ScreenTips will be seen, but this will depend on the recipient's workspace
setup, not yours. Moreover, if the recipient has "Make hidden markup visible
when opening or saving" enabled (as it is by default--and should be), then
the Reviewing Pane will likely be displayed.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Enstrique" wrote in message
...
Is there a way that I can hide the comment while keeping the "balloon" pop
up?

"Suzanne S. Barnhill" wrote:

This option is still available, but it depends on settings on the

student's
computer, not yours. If he is using Word 2000 or earlier, this is what

he
will see by default. In Word 2002 and 2003, ScreenTips are displayed in
Normal view. They are also displayed in Print Layout view if balloons

are
disabled on the Track Changes tab of Tools | Options. (Of course,

ScreenTips
must also be enabled on the View tab of Tools | Options.)

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup so
all may benefit.

"Enstrique" wrote in message
...
As an educator who uses computers in the classroom, I have to say that

the
older style of comments had a great use in the classroom. I could

type a
document, and insert a comment on a particular word. The 'old style'

was
to
highlight it in yellow. When the student moved their mouse over the

word,
the comment will appear. This was a great way to insert vocabulary

terms
to
unfamilar words.

While the new comments are OK, I would like the option to change it to

the
old format, instead of underlining the word, and placing the comment

to
the
right side of the page. Thank you.

----------------
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click

the "I
Agree" button in the message pane. If you do not see the button,

follow
this
link to open the suggestion in the Microsoft Web-based Newsreader and

then
click "I Agree" in the message pane.



http://www.microsoft.com/office/comm...ocmanagemen t



  #5   Report Post  
Enstrique
 
Posts: n/a
Default

You've been a big help so far... Thanks! Because I, or my fellow teachers
will be in charge of the computer lab, we can control the recipient's
workspace. I do have two more questions though...

1. Is there a way I can change the color of the highlighted comment. I
know that I can change the bracket color, but the word(s) themselves will
become highlighted in a complimentary color. I would like the bracketes to
be Black with the word highlighted in yellow (or some other 'stand out'
color) if possible. (I'm just being picky now, this is the perfectionist
coming out in me!)

2. Is there a way to hide the [f1], [f2], etc... comment markers next to
each word? This may be confusing to the younger students. I still want the
comment to be visible if they move their mouse over it, but the [f1]'s appear
to be part of the comment, or take up the space next to it.

Thanks for your help so far!



"Suzanne S. Barnhill" wrote:

If balloons are disabled and the Reviewing Pane is not displayed, only the
ScreenTips will be seen, but this will depend on the recipient's workspace
setup, not yours. Moreover, if the recipient has "Make hidden markup visible
when opening or saving" enabled (as it is by default--and should be), then
the Reviewing Pane will likely be displayed.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Enstrique" wrote in message
...
Is there a way that I can hide the comment while keeping the "balloon" pop
up?

"Suzanne S. Barnhill" wrote:

This option is still available, but it depends on settings on the

student's
computer, not yours. If he is using Word 2000 or earlier, this is what

he
will see by default. In Word 2002 and 2003, ScreenTips are displayed in
Normal view. They are also displayed in Print Layout view if balloons

are
disabled on the Track Changes tab of Tools | Options. (Of course,

ScreenTips
must also be enabled on the View tab of Tools | Options.)

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup so
all may benefit.

"Enstrique" wrote in message
...
As an educator who uses computers in the classroom, I have to say that

the
older style of comments had a great use in the classroom. I could

type a
document, and insert a comment on a particular word. The 'old style'

was
to
highlight it in yellow. When the student moved their mouse over the

word,
the comment will appear. This was a great way to insert vocabulary

terms
to
unfamilar words.

While the new comments are OK, I would like the option to change it to

the
old format, instead of underlining the word, and placing the comment

to
the
right side of the page. Thank you.

----------------
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click

the "I
Agree" button in the message pane. If you do not see the button,

follow
this
link to open the suggestion in the Microsoft Web-based Newsreader and

then
click "I Agree" in the message pane.



http://www.microsoft.com/office/comm...ocmanagemen t






  #6   Report Post  
Suzanne S. Barnhill
 
Posts: n/a
Default

Since I rarely use comments, you're straying into areas I'm not really
familiar with. Perhaps some other users will fill in the gaps. The highlight
color will be determined by the color set on the Track Changes tab of Tools
| Options. You can select yellow, but the brackets will also be yellow.
Since I see SSB1 in a comment I insert, I would guess that the "f" is
entered in the Initials field on the User Information tab of Tools |
Options. If you leave this blank, it will be regenerated from whatever is in
the Name field; if you enter a space here, you'll get a space followed by a
number in the comment; I don't believe there's any way to omit the number.

You can experiment with the User Information settings (as I have done to my
great entertainment and consternation). If you omit the Name field entirely,
it will be regenerated. If you replace it with a space, it will not. At that
point you might think you could omit the space from the Initials field, but
no! If you do that, then you get MSOffice before the comment number!

Perhaps you need to give your students more credit and assume that they'll
get used to whatever they see!

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Enstrique" wrote in message
...
You've been a big help so far... Thanks! Because I, or my fellow

teachers
will be in charge of the computer lab, we can control the recipient's
workspace. I do have two more questions though...

1. Is there a way I can change the color of the highlighted comment. I
know that I can change the bracket color, but the word(s) themselves will
become highlighted in a complimentary color. I would like the bracketes

to
be Black with the word highlighted in yellow (or some other 'stand out'
color) if possible. (I'm just being picky now, this is the perfectionist
coming out in me!)

2. Is there a way to hide the [f1], [f2], etc... comment markers next to
each word? This may be confusing to the younger students. I still want

the
comment to be visible if they move their mouse over it, but the [f1]'s

appear
to be part of the comment, or take up the space next to it.

Thanks for your help so far!



"Suzanne S. Barnhill" wrote:

If balloons are disabled and the Reviewing Pane is not displayed, only

the
ScreenTips will be seen, but this will depend on the recipient's

workspace
setup, not yours. Moreover, if the recipient has "Make hidden markup

visible
when opening or saving" enabled (as it is by default--and should be),

then
the Reviewing Pane will likely be displayed.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup so
all may benefit.

"Enstrique" wrote in message
...
Is there a way that I can hide the comment while keeping the "balloon"

pop
up?

"Suzanne S. Barnhill" wrote:

This option is still available, but it depends on settings on the

student's
computer, not yours. If he is using Word 2000 or earlier, this is

what
he
will see by default. In Word 2002 and 2003, ScreenTips are displayed

in
Normal view. They are also displayed in Print Layout view if

balloons
are
disabled on the Track Changes tab of Tools | Options. (Of course,

ScreenTips
must also be enabled on the View tab of Tools | Options.)

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup so
all may benefit.

"Enstrique" wrote in message
...
As an educator who uses computers in the classroom, I have to say

that
the
older style of comments had a great use in the classroom. I could

type a
document, and insert a comment on a particular word. The 'old

style'
was
to
highlight it in yellow. When the student moved their mouse over

the
word,
the comment will appear. This was a great way to insert

vocabulary
terms
to
unfamilar words.

While the new comments are OK, I would like the option to change

it to
the
old format, instead of underlining the word, and placing the

comment
to
the
right side of the page. Thank you.

----------------
This post is a suggestion for Microsoft, and Microsoft responds to

the
suggestions with the most votes. To vote for this suggestion,

click
the "I
Agree" button in the message pane. If you do not see the button,

follow
this
link to open the suggestion in the Microsoft Web-based Newsreader

and
then
click "I Agree" in the message pane.




http://www.microsoft.com/office/comm...ocmanagemen t





  #7   Report Post  
Enstrique
 
Posts: n/a
Default

Thanks for all of your help. It's amazing how Microsoft likes to make things
"easier" but in reality, it's more difficult! I can follow most complicated
things with Word, but try teaching it to an elementary student, or in my
case, a graduate student in a local University who seldom used a computer
before! Hopefully someone in the MS Office world reads these comments and
suggestions for future updates.


"Suzanne S. Barnhill" wrote:

Since I rarely use comments, you're straying into areas I'm not really
familiar with. Perhaps some other users will fill in the gaps. The highlight
color will be determined by the color set on the Track Changes tab of Tools
| Options. You can select yellow, but the brackets will also be yellow.
Since I see SSB1 in a comment I insert, I would guess that the "f" is
entered in the Initials field on the User Information tab of Tools |
Options. If you leave this blank, it will be regenerated from whatever is in
the Name field; if you enter a space here, you'll get a space followed by a
number in the comment; I don't believe there's any way to omit the number.

You can experiment with the User Information settings (as I have done to my
great entertainment and consternation). If you omit the Name field entirely,
it will be regenerated. If you replace it with a space, it will not. At that
point you might think you could omit the space from the Initials field, but
no! If you do that, then you get MSOffice before the comment number!

Perhaps you need to give your students more credit and assume that they'll
get used to whatever they see!

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Enstrique" wrote in message
...
You've been a big help so far... Thanks! Because I, or my fellow

teachers
will be in charge of the computer lab, we can control the recipient's
workspace. I do have two more questions though...

1. Is there a way I can change the color of the highlighted comment. I
know that I can change the bracket color, but the word(s) themselves will
become highlighted in a complimentary color. I would like the bracketes

to
be Black with the word highlighted in yellow (or some other 'stand out'
color) if possible. (I'm just being picky now, this is the perfectionist
coming out in me!)

2. Is there a way to hide the [f1], [f2], etc... comment markers next to
each word? This may be confusing to the younger students. I still want

the
comment to be visible if they move their mouse over it, but the [f1]'s

appear
to be part of the comment, or take up the space next to it.

Thanks for your help so far!



"Suzanne S. Barnhill" wrote:

If balloons are disabled and the Reviewing Pane is not displayed, only

the
ScreenTips will be seen, but this will depend on the recipient's

workspace
setup, not yours. Moreover, if the recipient has "Make hidden markup

visible
when opening or saving" enabled (as it is by default--and should be),

then
the Reviewing Pane will likely be displayed.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the

newsgroup so
all may benefit.

"Enstrique" wrote in message
...
Is there a way that I can hide the comment while keeping the "balloon"

pop
up?

"Suzanne S. Barnhill" wrote:

This option is still available, but it depends on settings on the
student's
computer, not yours. If he is using Word 2000 or earlier, this is

what
he
will see by default. In Word 2002 and 2003, ScreenTips are displayed

in
Normal view. They are also displayed in Print Layout view if

balloons
are
disabled on the Track Changes tab of Tools | Options. (Of course,
ScreenTips
must also be enabled on the View tab of Tools | Options.)

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so
all may benefit.

"Enstrique" wrote in message
...
As an educator who uses computers in the classroom, I have to say

that
the
older style of comments had a great use in the classroom. I could
type a
document, and insert a comment on a particular word. The 'old

style'
was
to
highlight it in yellow. When the student moved their mouse over

the
word,
the comment will appear. This was a great way to insert

vocabulary
terms
to
unfamilar words.

While the new comments are OK, I would like the option to change

it to
the
old format, instead of underlining the word, and placing the

comment
to
the
right side of the page. Thank you.

----------------
This post is a suggestion for Microsoft, and Microsoft responds to

the
suggestions with the most votes. To vote for this suggestion,

click
the "I
Agree" button in the message pane. If you do not see the button,
follow
this
link to open the suggestion in the Microsoft Web-based Newsreader

and
then
click "I Agree" in the message pane.




http://www.microsoft.com/office/comm...ocmanagemen t






Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How do you end or "turn off" a character style while entering text Larry Root Microsoft Word Help 3 April 25th 05 03:29 PM
Word 2003: Can one disable table styles? [email protected] Tables 5 April 10th 05 10:02 AM
How to Avoid Word 2003 Table Style Problems Judy Haynes Tables 0 March 23rd 05 06:41 PM
Font properties of table styles versus paragraph styles Bob S Tables 3 February 8th 05 01:13 PM
Style bug for Tables? [email protected] Microsoft Word Help 5 January 21st 05 03:40 PM


All times are GMT +1. The time now is 12:18 PM.

Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Microsoft Office Word Forum - WordBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Word"