I am doing a degree project report, and have outline numbering working.
However, I want the numbering for the Appendices to go A, A.1, A.2, B and so
on, wherease the body of the report goes 1, 1.1, 1.2, 2 and so on.

I've read the Shaun Kelly link and it doesn't seem to mention this.

I played around with a section break to no avail.

I don't want the document in two parts - there are so many references from
the actual report to the appendices which have to be able to update if the
numbering in the appendic changes.

So, is this possible? Or is it a wild goose change that I might as well
give up on right now?

TIA

Did you read
http://www.ShaunaKelly.com/word/numb...pendixes.html?

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Cats" wrote in message
...
I am doing a degree project report, and have outline numbering working.
However, I want the numbering for the Appendices to go A, A.1, A.2, B and
so
on, wherease the body of the report goes 1, 1.1, 1.2, 2 and so on.

I've read the Shaun Kelly link and it doesn't seem to mention this.

I played around with a section break to no avail.

I don't want the document in two parts - there are so many references from
the actual report to the appendices which have to be able to update if the
numbering in the appendic changes.

So, is this possible? Or is it a wild goose change that I might as well
give up on right now?

TIA

Ah so! No - and I see it answers the question exactly for me. I'll read it
carefully and have a go on a new document.

Thanks for this, and I'm glad it can be done though I will probably have to
start a new document and copy it all across. However there is time to do
that before the 12th November!

"Suzanne S. Barnhill" wrote:

Did you read
http://www.ShaunaKelly.com/word/numb...pendixes.html?

"Cats" wrote in message
...
I am doing a degree project report, and have outline numbering working.
However, I want the numbering for the Appendices to go A, A.1, A.2, B and
so
on, wherease the body of the report goes 1, 1.1, 1.2, 2 and so on.

I've read the Shaun Kelly link and it doesn't seem to mention this.

I played around with a section break to no avail.

I don't want the document in two parts - there are so many references from
the actual report to the appendices which have to be able to update if the
numbering in the appendic changes.

So, is this possible? Or is it a wild goose change that I might as well
give up on right now?

Well - having read Shauna's articles and had a play, I'm having problems -
this is Word 2000. I can link the headings as suggest, and attach them to
styles. The problem is getting the correct previous level. It works find
for Level 2 having level 1 as the previous level, but will level 3 accept
level 2 as the previous level? No. Same problem with headings 6-9 for the
appendices.

Are there known problems with this for Word 2000? Or common user errors
that I might well be making?

Grrrr...

"Cats" wrote:


Ah so! No - and I see it answers the question exactly for me. I'll read it
carefully and have a go on a new document.

Thanks for this, and I'm glad it can be done though I will probably have to
start a new document and copy it all across. However there is time to do
that before the 12th November!

"Suzanne S. Barnhill" wrote:

Did you read
http://www.ShaunaKelly.com/word/numb...pendixes.html?

"Cats" wrote in message
...
I am doing a degree project report, and have outline numbering working.
However, I want the numbering for the Appendices to go A, A.1, A.2, B and
so
on, wherease the body of the report goes 1, 1.1, 1.2, 2 and so on.

I've read the Shaun Kelly link and it doesn't seem to mention this.

I played around with a section break to no avail.

I don't want the document in two parts - there are so many references from
the actual report to the appendices which have to be able to update if the
numbering in the appendic changes.

So, is this possible? Or is it a wild goose change that I might as well
give up on right now?

There shouldn't be any problem getting level 3 to accept level 2 as the
previous level; in fact, that should be the default setting. But I'm not a
numbering expert, and they don't necessarily hang out here. I'd suggest you
post in the numbering NG
(news://msnews.microsoft.com/microsof...word.numbering).

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Cats" wrote in message
...

Well - having read Shauna's articles and had a play, I'm having problems -
this is Word 2000. I can link the headings as suggest, and attach them to
styles. The problem is getting the correct previous level. It works find
for Level 2 having level 1 as the previous level, but will level 3 accept
level 2 as the previous level? No. Same problem with headings 6-9 for
the
appendices.

Are there known problems with this for Word 2000? Or common user errors
that I might well be making?

Grrrr...

"Cats" wrote:


Ah so! No - and I see it answers the question exactly for me. I'll
read it
carefully and have a go on a new document.

Thanks for this, and I'm glad it can be done though I will probably have
to
start a new document and copy it all across. However there is time to
do
that before the 12th November!

"Suzanne S. Barnhill" wrote:

Did you read
http://www.ShaunaKelly.com/word/numb...pendixes.html?

"Cats" wrote in message
...
I am doing a degree project report, and have outline numbering
working.
However, I want the numbering for the Appendices to go A, A.1, A.2,
B and
so
on, wherease the body of the report goes 1, 1.1, 1.2, 2 and so on.

I've read the Shaun Kelly link and it doesn't seem to mention this.

I played around with a section break to no avail.

I don't want the document in two parts - there are so many
references from
the actual report to the appendices which have to be able to update
if the
numbering in the appendic changes.

So, is this possible? Or is it a wild goose change that I might as
well
give up on right now?

Thanks. After a break I realised it was operator error... The diaglog
where the levels are selected wasn't very clear to me.

I ended up regenerating normal.dot (probably a good idea anyway) redoing my
heading styles so they cascade and 6-9 are for the Appendices (1e.g. A.1
instead of 1.1), and then saving that as a new style to have the outline
numbering.

After a lot of cut'n'paste the document is there, though now I have to go
round fixing the cross-references... I keep telling myself it will all be
worth it in the end, and I will be finished pretty soon!

Thanks

"Suzanne S. Barnhill" wrote:

There shouldn't be any problem getting level 3 to accept level 2 as the
previous level; in fact, that should be the default setting. But I'm not a
numbering expert, and they don't necessarily hang out here. I'd suggest you
post in the numbering NG
(news://msnews.microsoft.com/microsof...word.numbering).

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Cats" wrote in message
...

Well - having read Shauna's articles and had a play, I'm having problems -
this is Word 2000. I can link the headings as suggest, and attach them to
styles. The problem is getting the correct previous level. It works find
for Level 2 having level 1 as the previous level, but will level 3 accept
level 2 as the previous level? No. Same problem with headings 6-9 for
the
appendices.

Are there known problems with this for Word 2000? Or common user errors
that I might well be making?

Grrrr...

"Cats" wrote:


Ah so! No - and I see it answers the question exactly for me. I'll
read it
carefully and have a go on a new document.

Thanks for this, and I'm glad it can be done though I will probably have
to
start a new document and copy it all across. However there is time to
do
that before the 12th November!

"Suzanne S. Barnhill" wrote:

Did you read
http://www.ShaunaKelly.com/word/numb...pendixes.html?

"Cats" wrote in message
...
I am doing a degree project report, and have outline numbering
working.
However, I want the numbering for the Appendices to go A, A.1, A.2,
B and
so
on, wherease the body of the report goes 1, 1.1, 1.2, 2 and so on.

I've read the Shaun Kelly link and it doesn't seem to mention this.

I played around with a section break to no avail.

I don't want the document in two parts - there are so many
references from
the actual report to the appendices which have to be able to update
if the
numbering in the appendic changes.

So, is this possible? Or is it a wild goose change that I might as
well
give up on right now?

Perhaps a bit late to mention this, but you might want to base your document
on a specific template other than Normal.dot. Once you've linked your
numbering format to styles, you don't really have to worry much about what
the default numbering in Format | Bullets and Numbering is. I go in
periodically and reset all the panes on all three tabs, but when you go to
that dialog from a numbered style, your numbering scheme will always be
displayed (and that's the one you *must* pick); and of course you must
always go in through level 1 if you're planning to change the numbering in
an outline-numbered list.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Cats" wrote in message
...

Thanks. After a break I realised it was operator error... The diaglog
where the levels are selected wasn't very clear to me.

I ended up regenerating normal.dot (probably a good idea anyway) redoing
my
heading styles so they cascade and 6-9 are for the Appendices (1e.g. A.1
instead of 1.1), and then saving that as a new style to have the outline
numbering.

After a lot of cut'n'paste the document is there, though now I have to go
round fixing the cross-references... I keep telling myself it will all be
worth it in the end, and I will be finished pretty soon!

Thanks

"Suzanne S. Barnhill" wrote:

There shouldn't be any problem getting level 3 to accept level 2 as the
previous level; in fact, that should be the default setting. But I'm not
a
numbering expert, and they don't necessarily hang out here. I'd suggest
you
post in the numbering NG
(news://msnews.microsoft.com/microsof...word.numbering).

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so
all may benefit.

"Cats" wrote in message
...

Well - having read Shauna's articles and had a play, I'm having
problems -
this is Word 2000. I can link the headings as suggest, and attach
them to
styles. The problem is getting the correct previous level. It works
find
for Level 2 having level 1 as the previous level, but will level 3
accept
level 2 as the previous level? No. Same problem with headings 6-9
for
the
appendices.

Are there known problems with this for Word 2000? Or common user
errors
that I might well be making?

Grrrr...

"Cats" wrote:


Ah so! No - and I see it answers the question exactly for me. I'll
read it
carefully and have a go on a new document.

Thanks for this, and I'm glad it can be done though I will probably
have
to
start a new document and copy it all across. However there is time
to
do
that before the 12th November!

"Suzanne S. Barnhill" wrote:

Did you read

http://www.ShaunaKelly.com/word/numb...pendixes.html?

"Cats" wrote in message
...
I am doing a degree project report, and have outline numbering
working.
However, I want the numbering for the Appendices to go A, A.1,
A.2,
B and
so
on, wherease the body of the report goes 1, 1.1, 1.2, 2 and so
on.

I've read the Shaun Kelly link and it doesn't seem to mention
this.

I played around with a section break to no avail.

I don't want the document in two parts - there are so many
references from
the actual report to the appendices which have to be able to
update
if the
numbering in the appendic changes.

So, is this possible? Or is it a wild goose change that I might
as
well
give up on right now?

Hi Suzanne

Thanks, yes, I did save a new template once normal.dot was back to - normal!
(well my version of normal).

"Suzanne S. Barnhill" wrote:

Perhaps a bit late to mention this, but you might want to base your document
on a specific template other than Normal.dot. Once you've linked your
numbering format to styles, you don't really have to worry much about what
the default numbering in Format | Bullets and Numbering is. I go in
periodically and reset all the panes on all three tabs, but when you go to
that dialog from a numbered style, your numbering scheme will always be
displayed (and that's the one you *must* pick); and of course you must
always go in through level 1 if you're planning to change the numbering in
an outline-numbered list.


"Cats" wrote in message
...

Thanks. After a break I realised it was operator error... The diaglog
where the levels are selected wasn't very clear to me.

I ended up regenerating normal.dot (probably a good idea anyway) redoing
my
heading styles so they cascade and 6-9 are for the Appendices (1e.g. A.1
instead of 1.1), and then saving that as a new style to have the outline
numbering.

After a lot of cut'n'paste the document is there, though now I have to go
round fixing the cross-references... I keep telling myself it will all be
worth it in the end, and I will be finished pretty soon!

Thanks

"Suzanne S. Barnhill" wrote:

There shouldn't be any problem getting level 3 to accept level 2 as the
previous level; in fact, that should be the default setting. But I'm not
a
numbering expert, and they don't necessarily hang out here. I'd suggest
you
post in the numbering NG
(news://msnews.microsoft.com/microsof...word.numbering).

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so
all may benefit.

"Cats" wrote in message
...

Well - having read Shauna's articles and had a play, I'm having
problems -
this is Word 2000. I can link the headings as suggest, and attach
them to
styles. The problem is getting the correct previous level. It works
find
for Level 2 having level 1 as the previous level, but will level 3
accept
level 2 as the previous level? No. Same problem with headings 6-9
for
the
appendices.

Are there known problems with this for Word 2000? Or common user
errors
that I might well be making?

Grrrr...

"Cats" wrote:


Ah so! No - and I see it answers the question exactly for me. I'll
read it
carefully and have a go on a new document.

Thanks for this, and I'm glad it can be done though I will probably
have
to
start a new document and copy it all across. However there is time
to
do
that before the 12th November!

"Suzanne S. Barnhill" wrote:

Did you read

http://www.ShaunaKelly.com/word/numb...pendixes.html?

"Cats" wrote in message
...
I am doing a degree project report, and have outline numbering
working.
However, I want the numbering for the Appendices to go A, A.1,
A.2,
B and
so
on, wherease the body of the report goes 1, 1.1, 1.2, 2 and so
on.

I've read the Shaun Kelly link and it doesn't seem to mention
this.

I played around with a section break to no avail.

I don't want the document in two parts - there are so many
references from
the actual report to the appendices which have to be able to
update
if the
numbering in the appendic changes.

So, is this possible? Or is it a wild goose change that I might
as
well
give up on right now?