Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to microsoft.public.word.newusers
[email protected] codeweb@gmail.com is offline
external usenet poster
 
Posts: 3
Default Automatic Path with Date

I have some questions hopefully someone can assist.

I want to save my word documents by default in the d:\path location
with the following format

"2010-02-26 File Name.doc "– I would like to insert the date
automatically.

Appreciate your assistance.
  #2   Report Post  
Posted to microsoft.public.word.newusers
Doug Robbins - Word MVP Doug Robbins - Word MVP is offline
external usenet poster
 
Posts: 8,832
Default Automatic Path with Date

Use a macro containing the following commands:

With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.SaveAs Format(Date, "yyyy-mm-dd") & " " & .Name
End With
End If
End With

If you create the macro with the name of Sub FileSaveAs() in your normal.dot
template or in an add-in, it will run whenever the FileSaveAs command is
used.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

wrote in message
...
I have some questions hopefully someone can assist.

I want to save my word documents by default in the d:\path location
with the following format

"2010-02-26 File Name.doc "– I would like to insert the date
automatically.

Appreciate your assistance.


  #3   Report Post  
Posted to microsoft.public.word.newusers
janey janey is offline
external usenet poster
 
Posts: 28
Default Automatic Path with Date

I was very interested in this reply as I save documents in this way so it
will save me having to put the date in each time I create a document.

However, is there a way of NOT running this macro - e.g. if I am creating a
template which does not need to have the date in the name?



"Doug Robbins - Word MVP" wrote in message
...
Use a macro containing the following commands:

With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.SaveAs Format(Date, "yyyy-mm-dd") & " " & .Name
End With
End If
End With

If you create the macro with the name of Sub FileSaveAs() in your
normal.dot template or in an add-in, it will run whenever the FileSaveAs
command is used.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

wrote in message
...
I have some questions hopefully someone can assist.

I want to save my word documents by default in the d:\path location
with the following format

"2010-02-26 File Name.doc "– I would like to insert the date
automatically.

Appreciate your assistance.


  #4   Report Post  
Posted to microsoft.public.word.newusers
janey janey is offline
external usenet poster
 
Posts: 28
Default Automatic Path with Date

May I also ask what the macro would be to have:

"File Name 2010-02-26.docx"

"janey" wrote in message
...
I was very interested in this reply as I save documents in this way so it
will save me having to put the date in each time I create a document.

However, is there a way of NOT running this macro - e.g. if I am creating
a template which does not need to have the date in the name?



"Doug Robbins - Word MVP" wrote in message
...
Use a macro containing the following commands:

With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.SaveAs Format(Date, "yyyy-mm-dd") & " " & .Name
End With
End If
End With

If you create the macro with the name of Sub FileSaveAs() in your
normal.dot template or in an add-in, it will run whenever the FileSaveAs
command is used.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

wrote in message
...
I have some questions hopefully someone can assist.

I want to save my word documents by default in the d:\path location
with the following format

"2010-02-26 File Name.doc "– I would like to insert the date
automatically.

Appreciate your assistance.


  #5   Report Post  
Posted to microsoft.public.word.newusers
Graham Mayor Graham Mayor is offline
external usenet poster
 
Posts: 19,312
Default Automatic Path with Date

Instead of naming it FileSaveAs() call it something else and run it from a
toolbar button or suitable keyboard shortcut.
or
Insert the FileSaveAs macro only in the template that requires it - and not
the normal template.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"janey" wrote in message
...
I was very interested in this reply as I save documents in this way so it
will save me having to put the date in each time I create a document.

However, is there a way of NOT running this macro - e.g. if I am creating
a template which does not need to have the date in the name?



"Doug Robbins - Word MVP" wrote in message
...
Use a macro containing the following commands:

With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.SaveAs Format(Date, "yyyy-mm-dd") & " " & .Name
End With
End If
End With

If you create the macro with the name of Sub FileSaveAs() in your
normal.dot template or in an add-in, it will run whenever the FileSaveAs
command is used.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

wrote in message
...
I have some questions hopefully someone can assist.

I want to save my word documents by default in the d:\path location
with the following format

"2010-02-26 File Name.doc "– I would like to insert the date
automatically.

Appreciate your assistance.






  #6   Report Post  
Posted to microsoft.public.word.newusers
Doug Robbins - Word MVP Doug Robbins - Word MVP is offline
external usenet poster
 
Posts: 8,832
Default Automatic Path with Date

Replace the line

.SaveAs Format(Date, "yyyy-mm-dd") & " " & .Name

with

.SaveAs .Name & " " & Format(Date, "yyyy-mm-dd")

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
May I also ask what the macro would be to have:

"File Name 2010-02-26.docx"

"janey" wrote in message
...
I was very interested in this reply as I save documents in this way so it
will save me having to put the date in each time I create a document.

However, is there a way of NOT running this macro - e.g. if I am creating
a template which does not need to have the date in the name?



"Doug Robbins - Word MVP" wrote in message
...
Use a macro containing the following commands:

With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.SaveAs Format(Date, "yyyy-mm-dd") & " " & .Name
End With
End If
End With

If you create the macro with the name of Sub FileSaveAs() in your
normal.dot template or in an add-in, it will run whenever the
FileSaveAs command is used.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

wrote in message
...
I have some questions hopefully someone can assist.

I want to save my word documents by default in the d:\path location
with the following format

"2010-02-26 File Name.doc "– I would like to insert the date
automatically.

Appreciate your assistance.

  #7   Report Post  
Posted to microsoft.public.word.newusers
janey janey is offline
external usenet poster
 
Posts: 28
Default Automatic Path with Date

I think I must be missing something!

I want to use this macro in my office templates only.
I started with just one of them e.g. Office1.dot (which I brought over from
Word 2003 to 2007).
I created a macro called FileSaveAs:

Sub FileSaveAs()
'
' FileSaveAs Macro
' Saves a copy of the document in a separate file
'
With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.saveas .Name & " " & Format(Date, "yyyy-mm-dd")
End With
End If
End With
End Sub

I then closed the template and opened a new document based on it. When I
pressed Save and put in a file name, e.g. Test, I got a file called
"Document1 2010-02-28.docx

How do I get this to be: Test 2010-02-28.docx please?

When I have this right, do I have to put the same macro in my other office
templates individually?


"Graham Mayor" wrote in message
...
Instead of naming it FileSaveAs() call it something else and run it from a
toolbar button or suitable keyboard shortcut.
or
Insert the FileSaveAs macro only in the template that requires it - and
not the normal template.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"janey" wrote in message
...
I was very interested in this reply as I save documents in this way so it
will save me having to put the date in each time I create a document.

However, is there a way of NOT running this macro - e.g. if I am creating
a template which does not need to have the date in the name?



"Doug Robbins - Word MVP" wrote in message
...
Use a macro containing the following commands:

With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.SaveAs Format(Date, "yyyy-mm-dd") & " " & .Name
End With
End If
End With

If you create the macro with the name of Sub FileSaveAs() in your
normal.dot template or in an add-in, it will run whenever the
FileSaveAs command is used.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

wrote in message
...
I have some questions hopefully someone can assist.

I want to save my word documents by default in the d:\path location
with the following format

"2010-02-26 File Name.doc "- I would like to insert the date
automatically.

Appreciate your assistance.



  #8   Report Post  
Posted to microsoft.public.word.newusers
Doug Robbins - Word MVP Doug Robbins - Word MVP is offline
external usenet poster
 
Posts: 8,832
Default Automatic Path with Date

Use:

Dim Fkill As String
Dialogs(wdDialogFileSaveAs).Show
With ActiveDocument
Fkill = .FullName
.SaveAs .Name & " " & Format(Date, "yyyy-mm-dd")
End With
Kill Fkill


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
I think I must be missing something!

I want to use this macro in my office templates only.
I started with just one of them e.g. Office1.dot (which I brought over
from Word 2003 to 2007).
I created a macro called FileSaveAs:

Sub FileSaveAs()
'
' FileSaveAs Macro
' Saves a copy of the document in a separate file
'
With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.saveas .Name & " " & Format(Date, "yyyy-mm-dd")
End With
End If
End With
End Sub

I then closed the template and opened a new document based on it. When I
pressed Save and put in a file name, e.g. Test, I got a file called
"Document1 2010-02-28.docx

How do I get this to be: Test 2010-02-28.docx please?

When I have this right, do I have to put the same macro in my other office
templates individually?


"Graham Mayor" wrote in message
...
Instead of naming it FileSaveAs() call it something else and run it from
a toolbar button or suitable keyboard shortcut.
or
Insert the FileSaveAs macro only in the template that requires it - and
not the normal template.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"janey" wrote in message
...
I was very interested in this reply as I save documents in this way so it
will save me having to put the date in each time I create a document.

However, is there a way of NOT running this macro - e.g. if I am
creating a template which does not need to have the date in the name?



"Doug Robbins - Word MVP" wrote in message
...
Use a macro containing the following commands:

With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.SaveAs Format(Date, "yyyy-mm-dd") & " " & .Name
End With
End If
End With

If you create the macro with the name of Sub FileSaveAs() in your
normal.dot template or in an add-in, it will run whenever the
FileSaveAs command is used.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

wrote in message
...
I have some questions hopefully someone can assist.

I want to save my word documents by default in the d:\path location
with the following format

"2010-02-26 File Name.doc "- I would like to insert the date
automatically.

Appreciate your assistance.



  #9   Report Post  
Posted to microsoft.public.word.newusers
Graham Mayor Graham Mayor is offline
external usenet poster
 
Posts: 19,312
Default Automatic Path with Date

Hmmm! I am not sure how that takes us forward here. As I see it, the problem
is in the use of ActiveDocument.Name to rename the document. If the document
has not been saved this will result in
Document1 2010-03-01.docx
If the document has already been saved with that name the macro will save
with the name
Document1 2010-03-01.docx 2010-03-01.docx
You need to test whether the document has been saved and then if not prompt
for the part of the filename before the date. If then the document has been
saved, you could eliminate the date from the filename and add a new name.
This of course will delete any document of the same name saved on the same
date.
There seems little point showing the Dialog(wdDialogFileSaveAs) unless you
are going to offer the dated name to the user, and it will add confusion as
any name the user enters in the dialog will be overwritten. For a document
template for a particular task something like the following might suffice

Dim sName As String
Dim vName As Variant
With ActiveDocument
If Len(.Path) = 0 Then
.Save
sName = .name
'or instead of the previous 2 lines
'sName = InputBox("Enter filename (without the date)")
Else
vName = Split(.name, ".")
sName = Left(vName(0), Len(vName(0)) - 11)
End If
With Dialogs(wdDialogFileSaveAs)
.name = sName & " " & Format(Date, "yyyy-mm-dd")
.Show
End With
End With

If you want something a little more universally applicable - see
http://www.gmayor.com/save_numbered_versions.htm


--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"Doug Robbins - Word MVP" wrote in message
...
Use:

Dim Fkill As String
Dialogs(wdDialogFileSaveAs).Show
With ActiveDocument
Fkill = .FullName
.SaveAs .Name & " " & Format(Date, "yyyy-mm-dd")
End With
Kill Fkill


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
I think I must be missing something!

I want to use this macro in my office templates only.
I started with just one of them e.g. Office1.dot (which I brought over
from Word 2003 to 2007).
I created a macro called FileSaveAs:

Sub FileSaveAs()
'
' FileSaveAs Macro
' Saves a copy of the document in a separate file
'
With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.saveas .Name & " " & Format(Date, "yyyy-mm-dd")
End With
End If
End With
End Sub

I then closed the template and opened a new document based on it. When I
pressed Save and put in a file name, e.g. Test, I got a file called
"Document1 2010-02-28.docx

How do I get this to be: Test 2010-02-28.docx please?

When I have this right, do I have to put the same macro in my other
office templates individually?


"Graham Mayor" wrote in message
...
Instead of naming it FileSaveAs() call it something else and run it from
a toolbar button or suitable keyboard shortcut.
or
Insert the FileSaveAs macro only in the template that requires it - and
not the normal template.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"janey" wrote in message
...
I was very interested in this reply as I save documents in this way so
it will save me having to put the date in each time I create a document.

However, is there a way of NOT running this macro - e.g. if I am
creating a template which does not need to have the date in the name?



"Doug Robbins - Word MVP" wrote in message
...
Use a macro containing the following commands:

With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.SaveAs Format(Date, "yyyy-mm-dd") & " " & .Name
End With
End If
End With

If you create the macro with the name of Sub FileSaveAs() in your
normal.dot template or in an add-in, it will run whenever the
FileSaveAs command is used.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

wrote in message
...
I have some questions hopefully someone can assist.

I want to save my word documents by default in the d:\path location
with the following format

"2010-02-26 File Name.doc "- I would like to insert the date
automatically.

Appreciate your assistance.





  #10   Report Post  
Posted to microsoft.public.word.newusers
janey janey is offline
external usenet poster
 
Posts: 28
Default Automatic Path with Date

Thanks for the suggestions.

I have tried the last two solutions but, in each case, got:

Document1.docx 2101-03-01

What I really want is:
Create new document (based on a particular template)
Save
Document1 2010-03-01.docx

Not sure how to transpose the item in the macro.


"Graham Mayor" wrote in message
...
Hmmm! I am not sure how that takes us forward here. As I see it, the
problem is in the use of ActiveDocument.Name to rename the document. If
the document has not been saved this will result in
Document1 2010-03-01.docx
If the document has already been saved with that name the macro will save
with the name
Document1 2010-03-01.docx 2010-03-01.docx
You need to test whether the document has been saved and then if not
prompt for the part of the filename before the date. If then the document
has been saved, you could eliminate the date from the filename and add a
new name. This of course will delete any document of the same name saved
on the same date.
There seems little point showing the Dialog(wdDialogFileSaveAs) unless you
are going to offer the dated name to the user, and it will add confusion
as any name the user enters in the dialog will be overwritten. For a
document template for a particular task something like the following might
suffice

Dim sName As String
Dim vName As Variant
With ActiveDocument
If Len(.Path) = 0 Then
.Save
sName = .name
'or instead of the previous 2 lines
'sName = InputBox("Enter filename (without the date)")
Else
vName = Split(.name, ".")
sName = Left(vName(0), Len(vName(0)) - 11)
End If
With Dialogs(wdDialogFileSaveAs)
.name = sName & " " & Format(Date, "yyyy-mm-dd")
.Show
End With
End With

If you want something a little more universally applicable - see
http://www.gmayor.com/save_numbered_versions.htm


--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"Doug Robbins - Word MVP" wrote in message
...
Use:

Dim Fkill As String
Dialogs(wdDialogFileSaveAs).Show
With ActiveDocument
Fkill = .FullName
.SaveAs .Name & " " & Format(Date, "yyyy-mm-dd")
End With
Kill Fkill


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
I think I must be missing something!

I want to use this macro in my office templates only.
I started with just one of them e.g. Office1.dot (which I brought over
from Word 2003 to 2007).
I created a macro called FileSaveAs:

Sub FileSaveAs()
'
' FileSaveAs Macro
' Saves a copy of the document in a separate file
'
With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.saveas .Name & " " & Format(Date, "yyyy-mm-dd")
End With
End If
End With
End Sub

I then closed the template and opened a new document based on it. When I
pressed Save and put in a file name, e.g. Test, I got a file called
"Document1 2010-02-28.docx

How do I get this to be: Test 2010-02-28.docx please?

When I have this right, do I have to put the same macro in my other
office templates individually?


"Graham Mayor" wrote in message
...
Instead of naming it FileSaveAs() call it something else and run it
from a toolbar button or suitable keyboard shortcut.
or
Insert the FileSaveAs macro only in the template that requires it - and
not the normal template.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"janey" wrote in message
...
I was very interested in this reply as I save documents in this way so
it will save me having to put the date in each time I create a
document.

However, is there a way of NOT running this macro - e.g. if I am
creating a template which does not need to have the date in the name?



"Doug Robbins - Word MVP" wrote in message
...
Use a macro containing the following commands:

With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.SaveAs Format(Date, "yyyy-mm-dd") & " " & .Name
End With
End If
End With

If you create the macro with the name of Sub FileSaveAs() in your
normal.dot template or in an add-in, it will run whenever the
FileSaveAs command is used.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

wrote in message
...
I have some questions hopefully someone can assist.

I want to save my word documents by default in the d:\path location
with the following format

"2010-02-26 File Name.doc "- I would like to insert the date
automatically.

Appreciate your assistance.







  #11   Report Post  
Posted to microsoft.public.word.newusers
Doug Robbins - Word MVP Doug Robbins - Word MVP is offline
external usenet poster
 
Posts: 8,832
Default Automatic Path with Date

What do you really want in place of Document1? Is the user intended to
supply the name of the document to replace that?

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
Thanks for the suggestions.

I have tried the last two solutions but, in each case, got:

Document1.docx 2101-03-01

What I really want is:
Create new document (based on a particular template)
Save
Document1 2010-03-01.docx

Not sure how to transpose the item in the macro.


"Graham Mayor" wrote in message
...
Hmmm! I am not sure how that takes us forward here. As I see it, the
problem is in the use of ActiveDocument.Name to rename the document. If
the document has not been saved this will result in
Document1 2010-03-01.docx
If the document has already been saved with that name the macro will save
with the name
Document1 2010-03-01.docx 2010-03-01.docx
You need to test whether the document has been saved and then if not
prompt for the part of the filename before the date. If then the document
has been saved, you could eliminate the date from the filename and add a
new name. This of course will delete any document of the same name saved
on the same date.
There seems little point showing the Dialog(wdDialogFileSaveAs) unless
you are going to offer the dated name to the user, and it will add
confusion as any name the user enters in the dialog will be overwritten.
For a document template for a particular task something like the
following might suffice

Dim sName As String
Dim vName As Variant
With ActiveDocument
If Len(.Path) = 0 Then
.Save
sName = .name
'or instead of the previous 2 lines
'sName = InputBox("Enter filename (without the date)")
Else
vName = Split(.name, ".")
sName = Left(vName(0), Len(vName(0)) - 11)
End If
With Dialogs(wdDialogFileSaveAs)
.name = sName & " " & Format(Date, "yyyy-mm-dd")
.Show
End With
End With

If you want something a little more universally applicable - see
http://www.gmayor.com/save_numbered_versions.htm


--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"Doug Robbins - Word MVP" wrote in message
...
Use:

Dim Fkill As String
Dialogs(wdDialogFileSaveAs).Show
With ActiveDocument
Fkill = .FullName
.SaveAs .Name & " " & Format(Date, "yyyy-mm-dd")
End With
Kill Fkill


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
I think I must be missing something!

I want to use this macro in my office templates only.
I started with just one of them e.g. Office1.dot (which I brought over
from Word 2003 to 2007).
I created a macro called FileSaveAs:

Sub FileSaveAs()
'
' FileSaveAs Macro
' Saves a copy of the document in a separate file
'
With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.saveas .Name & " " & Format(Date, "yyyy-mm-dd")
End With
End If
End With
End Sub

I then closed the template and opened a new document based on it. When
I pressed Save and put in a file name, e.g. Test, I got a file called
"Document1 2010-02-28.docx

How do I get this to be: Test 2010-02-28.docx please?

When I have this right, do I have to put the same macro in my other
office templates individually?


"Graham Mayor" wrote in message
...
Instead of naming it FileSaveAs() call it something else and run it
from a toolbar button or suitable keyboard shortcut.
or
Insert the FileSaveAs macro only in the template that requires it -
and not the normal template.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"janey" wrote in message
...
I was very interested in this reply as I save documents in this way so
it will save me having to put the date in each time I create a
document.

However, is there a way of NOT running this macro - e.g. if I am
creating a template which does not need to have the date in the name?



"Doug Robbins - Word MVP" wrote in message
...
Use a macro containing the following commands:

With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.SaveAs Format(Date, "yyyy-mm-dd") & " " & .Name
End With
End If
End With

If you create the macro with the name of Sub FileSaveAs() in your
normal.dot template or in an add-in, it will run whenever the
FileSaveAs command is used.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of
my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

wrote in message
...
I have some questions hopefully someone can assist.

I want to save my word documents by default in the d:\path location
with the following format

"2010-02-26 File Name.doc "- I would like to insert the date
automatically.

Appreciate your assistance.





  #12   Report Post  
Posted to microsoft.public.word.newusers
janey janey is offline
external usenet poster
 
Posts: 28
Default Automatic Path with Date

I want to create a document and save with the document name which I give it,
followed by the date.

"Doug Robbins - Word MVP" wrote in message
...
What do you really want in place of Document1? Is the user intended to
supply the name of the document to replace that?

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
Thanks for the suggestions.

I have tried the last two solutions but, in each case, got:

Document1.docx 2101-03-01

What I really want is:
Create new document (based on a particular template)
Save
Document1 2010-03-01.docx

Not sure how to transpose the item in the macro.


"Graham Mayor" wrote in message
...
Hmmm! I am not sure how that takes us forward here. As I see it, the
problem is in the use of ActiveDocument.Name to rename the document. If
the document has not been saved this will result in
Document1 2010-03-01.docx
If the document has already been saved with that name the macro will
save with the name
Document1 2010-03-01.docx 2010-03-01.docx
You need to test whether the document has been saved and then if not
prompt for the part of the filename before the date. If then the
document has been saved, you could eliminate the date from the filename
and add a new name. This of course will delete any document of the same
name saved on the same date.
There seems little point showing the Dialog(wdDialogFileSaveAs) unless
you are going to offer the dated name to the user, and it will add
confusion as any name the user enters in the dialog will be overwritten.
For a document template for a particular task something like the
following might suffice

Dim sName As String
Dim vName As Variant
With ActiveDocument
If Len(.Path) = 0 Then
.Save
sName = .name
'or instead of the previous 2 lines
'sName = InputBox("Enter filename (without the date)")
Else
vName = Split(.name, ".")
sName = Left(vName(0), Len(vName(0)) - 11)
End If
With Dialogs(wdDialogFileSaveAs)
.name = sName & " " & Format(Date, "yyyy-mm-dd")
.Show
End With
End With

If you want something a little more universally applicable - see
http://www.gmayor.com/save_numbered_versions.htm


--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"Doug Robbins - Word MVP" wrote in message
...
Use:

Dim Fkill As String
Dialogs(wdDialogFileSaveAs).Show
With ActiveDocument
Fkill = .FullName
.SaveAs .Name & " " & Format(Date, "yyyy-mm-dd")
End With
Kill Fkill


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
I think I must be missing something!

I want to use this macro in my office templates only.
I started with just one of them e.g. Office1.dot (which I brought over
from Word 2003 to 2007).
I created a macro called FileSaveAs:

Sub FileSaveAs()
'
' FileSaveAs Macro
' Saves a copy of the document in a separate file
'
With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.saveas .Name & " " & Format(Date, "yyyy-mm-dd")
End With
End If
End With
End Sub

I then closed the template and opened a new document based on it. When
I pressed Save and put in a file name, e.g. Test, I got a file called
"Document1 2010-02-28.docx

How do I get this to be: Test 2010-02-28.docx please?

When I have this right, do I have to put the same macro in my other
office templates individually?


"Graham Mayor" wrote in message
...
Instead of naming it FileSaveAs() call it something else and run it
from a toolbar button or suitable keyboard shortcut.
or
Insert the FileSaveAs macro only in the template that requires it -
and not the normal template.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"janey" wrote in message
...
I was very interested in this reply as I save documents in this way
so it will save me having to put the date in each time I create a
document.

However, is there a way of NOT running this macro - e.g. if I am
creating a template which does not need to have the date in the
name?



"Doug Robbins - Word MVP" wrote in message
...
Use a macro containing the following commands:

With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.SaveAs Format(Date, "yyyy-mm-dd") & " " & .Name
End With
End If
End With

If you create the macro with the name of Sub FileSaveAs() in your
normal.dot template or in an add-in, it will run whenever the
FileSaveAs command is used.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of
my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

wrote in message
...
I have some questions hopefully someone can assist.

I want to save my word documents by default in the d:\path
location
with the following format

"2010-02-26 File Name.doc "- I would like to insert the date
automatically.

Appreciate your assistance.





  #13   Report Post  
Posted to microsoft.public.word.newusers
Graham Mayor Graham Mayor is offline
external usenet poster
 
Posts: 19,312
Default Automatic Path with Date

That is because you had already saved the document as Document1.docx.

It will only work correctly if the document has not already been saved, or
if it has been saved c/w date with the macro in the format you asked for.
The macro cannot guess what your existing document name is. You have to meet
it half way. Unless you know what the original name is, so that you can
extract from it the parts you want (here I have removed the date from the
existing filename) then you cannot hope to name it as you require.

If you simply want to remove the extension from the filename before saving a
dated version of it then change the line

sName = Left(vName(0), Len(vName(0)) - 11)
to
sName = vName(0)

If you want to cater for every eventuality then we need to know what those
eventualities are.

However, you said earlier that this was for a specific document template. If
you create a new document from that template, then the macro I supplied will
work.
If you then use the macro to save again, it will remove the existing date
from the filename and save with the current date. If the current date is the
same as the original date then the original file will be over-written.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org




"janey" wrote in message
...
Thanks for the suggestions.

I have tried the last two solutions but, in each case, got:

Document1.docx 2101-03-01

What I really want is:
Create new document (based on a particular template)
Save
Document1 2010-03-01.docx

Not sure how to transpose the item in the macro.


"Graham Mayor" wrote in message
...
Hmmm! I am not sure how that takes us forward here. As I see it, the
problem is in the use of ActiveDocument.Name to rename the document. If
the document has not been saved this will result in
Document1 2010-03-01.docx
If the document has already been saved with that name the macro will save
with the name
Document1 2010-03-01.docx 2010-03-01.docx
You need to test whether the document has been saved and then if not
prompt for the part of the filename before the date. If then the document
has been saved, you could eliminate the date from the filename and add a
new name. This of course will delete any document of the same name saved
on the same date.
There seems little point showing the Dialog(wdDialogFileSaveAs) unless
you are going to offer the dated name to the user, and it will add
confusion as any name the user enters in the dialog will be overwritten.
For a document template for a particular task something like the
following might suffice

Dim sName As String
Dim vName As Variant
With ActiveDocument
If Len(.Path) = 0 Then
.Save
sName = .name
'or instead of the previous 2 lines
'sName = InputBox("Enter filename (without the date)")
Else
vName = Split(.name, ".")
sName = Left(vName(0), Len(vName(0)) - 11)
End If
With Dialogs(wdDialogFileSaveAs)
.name = sName & " " & Format(Date, "yyyy-mm-dd")
.Show
End With
End With

If you want something a little more universally applicable - see
http://www.gmayor.com/save_numbered_versions.htm


--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"Doug Robbins - Word MVP" wrote in message
...
Use:

Dim Fkill As String
Dialogs(wdDialogFileSaveAs).Show
With ActiveDocument
Fkill = .FullName
.SaveAs .Name & " " & Format(Date, "yyyy-mm-dd")
End With
Kill Fkill


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
I think I must be missing something!

I want to use this macro in my office templates only.
I started with just one of them e.g. Office1.dot (which I brought over
from Word 2003 to 2007).
I created a macro called FileSaveAs:

Sub FileSaveAs()
'
' FileSaveAs Macro
' Saves a copy of the document in a separate file
'
With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.saveas .Name & " " & Format(Date, "yyyy-mm-dd")
End With
End If
End With
End Sub

I then closed the template and opened a new document based on it. When
I pressed Save and put in a file name, e.g. Test, I got a file called
"Document1 2010-02-28.docx

How do I get this to be: Test 2010-02-28.docx please?

When I have this right, do I have to put the same macro in my other
office templates individually?


"Graham Mayor" wrote in message
...
Instead of naming it FileSaveAs() call it something else and run it
from a toolbar button or suitable keyboard shortcut.
or
Insert the FileSaveAs macro only in the template that requires it -
and not the normal template.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"janey" wrote in message
...
I was very interested in this reply as I save documents in this way so
it will save me having to put the date in each time I create a
document.

However, is there a way of NOT running this macro - e.g. if I am
creating a template which does not need to have the date in the name?



"Doug Robbins - Word MVP" wrote in message
...
Use a macro containing the following commands:

With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.SaveAs Format(Date, "yyyy-mm-dd") & " " & .Name
End With
End If
End With

If you create the macro with the name of Sub FileSaveAs() in your
normal.dot template or in an add-in, it will run whenever the
FileSaveAs command is used.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of
my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

wrote in message
...
I have some questions hopefully someone can assist.

I want to save my word documents by default in the d:\path location
with the following format

"2010-02-26 File Name.doc "- I would like to insert the date
automatically.

Appreciate your assistance.







  #14   Report Post  
Posted to microsoft.public.word.newusers
Gordon[_4_] Gordon[_4_] is offline
external usenet poster
 
Posts: 239
Default Automatic Path with Date


"janey" wrote in message
...
I want to create a document and save with the document name which I give
it, followed by the date.


Well as you are typing in the name of the document, isn't it just as easy to
type in the date at the same time? And why would you need the date in the
name in the first place?
The Created Date field will tell you when the document was created...

  #15   Report Post  
Posted to microsoft.public.word.newusers
Graham Mayor Graham Mayor is offline
external usenet poster
 
Posts: 19,312
Default Automatic Path with Date

It is the integration of your name and the date using existing dialogs that
is the problem. Try

With Dialogs(wdDialogFileSaveAs)
.name = InputBox("Name") & " " & Format(Date, "yyyy-mm-dd")
.Show
End With

Enter the name you want to use in the inputbox and the name and date will be
added to the saveas dialog box

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"janey" wrote in message
...
I want to create a document and save with the document name which I give
it, followed by the date.

"Doug Robbins - Word MVP" wrote in message
...
What do you really want in place of Document1? Is the user intended to
supply the name of the document to replace that?

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
Thanks for the suggestions.

I have tried the last two solutions but, in each case, got:

Document1.docx 2101-03-01

What I really want is:
Create new document (based on a particular template)
Save
Document1 2010-03-01.docx

Not sure how to transpose the item in the macro.


"Graham Mayor" wrote in message
...
Hmmm! I am not sure how that takes us forward here. As I see it, the
problem is in the use of ActiveDocument.Name to rename the document. If
the document has not been saved this will result in
Document1 2010-03-01.docx
If the document has already been saved with that name the macro will
save with the name
Document1 2010-03-01.docx 2010-03-01.docx
You need to test whether the document has been saved and then if not
prompt for the part of the filename before the date. If then the
document has been saved, you could eliminate the date from the filename
and add a new name. This of course will delete any document of the same
name saved on the same date.
There seems little point showing the Dialog(wdDialogFileSaveAs) unless
you are going to offer the dated name to the user, and it will add
confusion as any name the user enters in the dialog will be
overwritten. For a document template for a particular task something
like the following might suffice

Dim sName As String
Dim vName As Variant
With ActiveDocument
If Len(.Path) = 0 Then
.Save
sName = .name
'or instead of the previous 2 lines
'sName = InputBox("Enter filename (without the date)")
Else
vName = Split(.name, ".")
sName = Left(vName(0), Len(vName(0)) - 11)
End If
With Dialogs(wdDialogFileSaveAs)
.name = sName & " " & Format(Date, "yyyy-mm-dd")
.Show
End With
End With

If you want something a little more universally applicable - see
http://www.gmayor.com/save_numbered_versions.htm


--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"Doug Robbins - Word MVP" wrote in message
...
Use:

Dim Fkill As String
Dialogs(wdDialogFileSaveAs).Show
With ActiveDocument
Fkill = .FullName
.SaveAs .Name & " " & Format(Date, "yyyy-mm-dd")
End With
Kill Fkill


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
I think I must be missing something!

I want to use this macro in my office templates only.
I started with just one of them e.g. Office1.dot (which I brought
over from Word 2003 to 2007).
I created a macro called FileSaveAs:

Sub FileSaveAs()
'
' FileSaveAs Macro
' Saves a copy of the document in a separate file
'
With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.saveas .Name & " " & Format(Date, "yyyy-mm-dd")
End With
End If
End With
End Sub

I then closed the template and opened a new document based on it.
When I pressed Save and put in a file name, e.g. Test, I got a file
called "Document1 2010-02-28.docx

How do I get this to be: Test 2010-02-28.docx please?

When I have this right, do I have to put the same macro in my other
office templates individually?


"Graham Mayor" wrote in message
...
Instead of naming it FileSaveAs() call it something else and run it
from a toolbar button or suitable keyboard shortcut.
or
Insert the FileSaveAs macro only in the template that requires it -
and not the normal template.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"janey" wrote in message
...
I was very interested in this reply as I save documents in this way
so it will save me having to put the date in each time I create a
document.

However, is there a way of NOT running this macro - e.g. if I am
creating a template which does not need to have the date in the
name?



"Doug Robbins - Word MVP" wrote in message
...
Use a macro containing the following commands:

With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.SaveAs Format(Date, "yyyy-mm-dd") & " " & .Name
End With
End If
End With

If you create the macro with the name of Sub FileSaveAs() in your
normal.dot template or in an add-in, it will run whenever the
FileSaveAs command is used.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of
my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via
msnews.microsoft.com

wrote in message
...
I have some questions hopefully someone can assist.

I want to save my word documents by default in the d:\path
location
with the following format

"2010-02-26 File Name.doc "- I would like to insert the date
automatically.

Appreciate your assistance.









  #16   Report Post  
Posted to microsoft.public.word.newusers
janey janey is offline
external usenet poster
 
Posts: 28
Default Automatic Path with Date

Yes, Gordon, that is the way I have done it up to now but having read the
first post in this thread, it gave me the idea that it could be automated.
The files in a particular directory in my office are listed as below:

Smith 2010-01-23
Smith 2010-01-31
Smith 2010-02-05
Voce 2010-01-14
Voce 2010-01-25
Voce 2010-02-24
etc

I just thought it would be good to be able to save/save as Smith, Voce, etc,
when I create a new document and have the date inserted.

I realise that the created date shows in the Details list but we need each
file to have the date included.

"Gordon" wrote in message
...

"janey" wrote in message
...
I want to create a document and save with the document name which I give
it, followed by the date.


Well as you are typing in the name of the document, isn't it just as easy
to type in the date at the same time? And why would you need the date in
the name in the first place?
The Created Date field will tell you when the document was created...


  #17   Report Post  
Posted to microsoft.public.word.newusers
Doug Robbins - Word MVP Doug Robbins - Word MVP is offline
external usenet poster
 
Posts: 8,832
Default Automatic Path with Date

Running a macro with this code

Dim Fkill As String
Dialogs(wdDialogFileSaveAs).Show
With ActiveDocument
Fkill = .FullName
.SaveAs .Name & " " & Format(Date, "yyyy-mm-dd")
End With
Kill Fkill

Will display the FileSaveAs dialog and if you enter a name such as Smith
into that dialog and click OK, it will save the document with the initially
with the name Smith.doc, then it will save a copy of the document with the
name Smith 2010-03-01.doc and then it will delete the original file
Smith.doc

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
I want to create a document and save with the document name which I give
it, followed by the date.

"Doug Robbins - Word MVP" wrote in message
...
What do you really want in place of Document1? Is the user intended to
supply the name of the document to replace that?

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
Thanks for the suggestions.

I have tried the last two solutions but, in each case, got:

Document1.docx 2101-03-01

What I really want is:
Create new document (based on a particular template)
Save
Document1 2010-03-01.docx

Not sure how to transpose the item in the macro.


"Graham Mayor" wrote in message
...
Hmmm! I am not sure how that takes us forward here. As I see it, the
problem is in the use of ActiveDocument.Name to rename the document. If
the document has not been saved this will result in
Document1 2010-03-01.docx
If the document has already been saved with that name the macro will
save with the name
Document1 2010-03-01.docx 2010-03-01.docx
You need to test whether the document has been saved and then if not
prompt for the part of the filename before the date. If then the
document has been saved, you could eliminate the date from the filename
and add a new name. This of course will delete any document of the same
name saved on the same date.
There seems little point showing the Dialog(wdDialogFileSaveAs) unless
you are going to offer the dated name to the user, and it will add
confusion as any name the user enters in the dialog will be
overwritten. For a document template for a particular task something
like the following might suffice

Dim sName As String
Dim vName As Variant
With ActiveDocument
If Len(.Path) = 0 Then
.Save
sName = .name
'or instead of the previous 2 lines
'sName = InputBox("Enter filename (without the date)")
Else
vName = Split(.name, ".")
sName = Left(vName(0), Len(vName(0)) - 11)
End If
With Dialogs(wdDialogFileSaveAs)
.name = sName & " " & Format(Date, "yyyy-mm-dd")
.Show
End With
End With

If you want something a little more universally applicable - see
http://www.gmayor.com/save_numbered_versions.htm


--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"Doug Robbins - Word MVP" wrote in message
...
Use:

Dim Fkill As String
Dialogs(wdDialogFileSaveAs).Show
With ActiveDocument
Fkill = .FullName
.SaveAs .Name & " " & Format(Date, "yyyy-mm-dd")
End With
Kill Fkill


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
I think I must be missing something!

I want to use this macro in my office templates only.
I started with just one of them e.g. Office1.dot (which I brought
over from Word 2003 to 2007).
I created a macro called FileSaveAs:

Sub FileSaveAs()
'
' FileSaveAs Macro
' Saves a copy of the document in a separate file
'
With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.saveas .Name & " " & Format(Date, "yyyy-mm-dd")
End With
End If
End With
End Sub

I then closed the template and opened a new document based on it.
When I pressed Save and put in a file name, e.g. Test, I got a file
called "Document1 2010-02-28.docx

How do I get this to be: Test 2010-02-28.docx please?

When I have this right, do I have to put the same macro in my other
office templates individually?


"Graham Mayor" wrote in message
...
Instead of naming it FileSaveAs() call it something else and run it
from a toolbar button or suitable keyboard shortcut.
or
Insert the FileSaveAs macro only in the template that requires it -
and not the normal template.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"janey" wrote in message
...
I was very interested in this reply as I save documents in this way
so it will save me having to put the date in each time I create a
document.

However, is there a way of NOT running this macro - e.g. if I am
creating a template which does not need to have the date in the
name?



"Doug Robbins - Word MVP" wrote in message
...
Use a macro containing the following commands:

With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.SaveAs Format(Date, "yyyy-mm-dd") & " " & .Name
End With
End If
End With

If you create the macro with the name of Sub FileSaveAs() in your
normal.dot template or in an add-in, it will run whenever the
FileSaveAs command is used.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of
my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via
msnews.microsoft.com

wrote in message
...
I have some questions hopefully someone can assist.

I want to save my word documents by default in the d:\path
location
with the following format

"2010-02-26 File Name.doc "- I would like to insert the date
automatically.

Appreciate your assistance.





  #18   Report Post  
Posted to microsoft.public.word.newusers
janey janey is offline
external usenet poster
 
Posts: 28
Default Automatic Path with Date

Hi Doug, I used that macro and got:

Smith.docx

When I opened it and saved it again, I got two 'Save As' boxes. I saved it
twice and it saved as Smith 2010-03-03.docx (which is what I want) but did
not delete the original Smith.docx.

How do I get the macro to run automatically on a new file saved for the
first time, please?



"Doug Robbins - Word MVP" wrote in message
...
Running a macro with this code

Dim Fkill As String
Dialogs(wdDialogFileSaveAs).Show
With ActiveDocument
Fkill = .FullName
.SaveAs .Name & " " & Format(Date, "yyyy-mm-dd")
End With
Kill Fkill

Will display the FileSaveAs dialog and if you enter a name such as Smith
into that dialog and click OK, it will save the document with the
initially with the name Smith.doc, then it will save a copy of the
document with the name Smith 2010-03-01.doc and then it will delete the
original file Smith.doc

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
I want to create a document and save with the document name which I give
it, followed by the date.

"Doug Robbins - Word MVP" wrote in message
...
What do you really want in place of Document1? Is the user intended to
supply the name of the document to replace that?

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
Thanks for the suggestions.

I have tried the last two solutions but, in each case, got:

Document1.docx 2101-03-01

What I really want is:
Create new document (based on a particular template)
Save
Document1 2010-03-01.docx

Not sure how to transpose the item in the macro.


"Graham Mayor" wrote in message
...
Hmmm! I am not sure how that takes us forward here. As I see it, the
problem is in the use of ActiveDocument.Name to rename the document.
If the document has not been saved this will result in
Document1 2010-03-01.docx
If the document has already been saved with that name the macro will
save with the name
Document1 2010-03-01.docx 2010-03-01.docx
You need to test whether the document has been saved and then if not
prompt for the part of the filename before the date. If then the
document has been saved, you could eliminate the date from the
filename and add a new name. This of course will delete any document
of the same name saved on the same date.
There seems little point showing the Dialog(wdDialogFileSaveAs) unless
you are going to offer the dated name to the user, and it will add
confusion as any name the user enters in the dialog will be
overwritten. For a document template for a particular task something
like the following might suffice

Dim sName As String
Dim vName As Variant
With ActiveDocument
If Len(.Path) = 0 Then
.Save
sName = .name
'or instead of the previous 2 lines
'sName = InputBox("Enter filename (without the date)")
Else
vName = Split(.name, ".")
sName = Left(vName(0), Len(vName(0)) - 11)
End If
With Dialogs(wdDialogFileSaveAs)
.name = sName & " " & Format(Date, "yyyy-mm-dd")
.Show
End With
End With

If you want something a little more universally applicable - see
http://www.gmayor.com/save_numbered_versions.htm


--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"Doug Robbins - Word MVP" wrote in message
...
Use:

Dim Fkill As String
Dialogs(wdDialogFileSaveAs).Show
With ActiveDocument
Fkill = .FullName
.SaveAs .Name & " " & Format(Date, "yyyy-mm-dd")
End With
Kill Fkill


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
I think I must be missing something!

I want to use this macro in my office templates only.
I started with just one of them e.g. Office1.dot (which I brought
over from Word 2003 to 2007).
I created a macro called FileSaveAs:

Sub FileSaveAs()
'
' FileSaveAs Macro
' Saves a copy of the document in a separate file
'
With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.saveas .Name & " " & Format(Date, "yyyy-mm-dd")
End With
End If
End With
End Sub

I then closed the template and opened a new document based on it.
When I pressed Save and put in a file name, e.g. Test, I got a file
called "Document1 2010-02-28.docx

How do I get this to be: Test 2010-02-28.docx please?

When I have this right, do I have to put the same macro in my other
office templates individually?


"Graham Mayor" wrote in message
...
Instead of naming it FileSaveAs() call it something else and run it
from a toolbar button or suitable keyboard shortcut.
or
Insert the FileSaveAs macro only in the template that requires it -
and not the normal template.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"janey" wrote in message
...
I was very interested in this reply as I save documents in this way
so it will save me having to put the date in each time I create a
document.

However, is there a way of NOT running this macro - e.g. if I am
creating a template which does not need to have the date in the
name?



"Doug Robbins - Word MVP" wrote in
message ...
Use a macro containing the following commands:

With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.SaveAs Format(Date, "yyyy-mm-dd") & " " & .Name
End With
End If
End With

If you create the macro with the name of Sub FileSaveAs() in your
normal.dot template or in an add-in, it will run whenever the
FileSaveAs command is used.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself
of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via
msnews.microsoft.com

wrote in message
...
I have some questions hopefully someone can assist.

I want to save my word documents by default in the d:\path
location
with the following format

"2010-02-26 File Name.doc "- I would like to insert the date
automatically.

Appreciate your assistance.





  #19   Report Post  
Posted to microsoft.public.word.newusers
Doug Robbins - Word MVP Doug Robbins - Word MVP is offline
external usenet poster
 
Posts: 8,832
Default Automatic Path with Date

Name the macro FileSaveAs

It will then run when you use the FileSaveAs command.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
Hi Doug, I used that macro and got:

Smith.docx

When I opened it and saved it again, I got two 'Save As' boxes. I saved it
twice and it saved as Smith 2010-03-03.docx (which is what I want) but did
not delete the original Smith.docx.

How do I get the macro to run automatically on a new file saved for the
first time, please?



"Doug Robbins - Word MVP" wrote in message
...
Running a macro with this code

Dim Fkill As String
Dialogs(wdDialogFileSaveAs).Show
With ActiveDocument
Fkill = .FullName
.SaveAs .Name & " " & Format(Date, "yyyy-mm-dd")
End With
Kill Fkill

Will display the FileSaveAs dialog and if you enter a name such as Smith
into that dialog and click OK, it will save the document with the
initially with the name Smith.doc, then it will save a copy of the
document with the name Smith 2010-03-01.doc and then it will delete the
original file Smith.doc

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
I want to create a document and save with the document name which I give
it, followed by the date.

"Doug Robbins - Word MVP" wrote in message
...
What do you really want in place of Document1? Is the user intended to
supply the name of the document to replace that?

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
Thanks for the suggestions.

I have tried the last two solutions but, in each case, got:

Document1.docx 2101-03-01

What I really want is:
Create new document (based on a particular template)
Save
Document1 2010-03-01.docx

Not sure how to transpose the item in the macro.


"Graham Mayor" wrote in message
...
Hmmm! I am not sure how that takes us forward here. As I see it, the
problem is in the use of ActiveDocument.Name to rename the document.
If the document has not been saved this will result in
Document1 2010-03-01.docx
If the document has already been saved with that name the macro will
save with the name
Document1 2010-03-01.docx 2010-03-01.docx
You need to test whether the document has been saved and then if not
prompt for the part of the filename before the date. If then the
document has been saved, you could eliminate the date from the
filename and add a new name. This of course will delete any document
of the same name saved on the same date.
There seems little point showing the Dialog(wdDialogFileSaveAs)
unless you are going to offer the dated name to the user, and it will
add confusion as any name the user enters in the dialog will be
overwritten. For a document template for a particular task something
like the following might suffice

Dim sName As String
Dim vName As Variant
With ActiveDocument
If Len(.Path) = 0 Then
.Save
sName = .name
'or instead of the previous 2 lines
'sName = InputBox("Enter filename (without the date)")
Else
vName = Split(.name, ".")
sName = Left(vName(0), Len(vName(0)) - 11)
End If
With Dialogs(wdDialogFileSaveAs)
.name = sName & " " & Format(Date, "yyyy-mm-dd")
.Show
End With
End With

If you want something a little more universally applicable - see
http://www.gmayor.com/save_numbered_versions.htm


--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"Doug Robbins - Word MVP" wrote in message
...
Use:

Dim Fkill As String
Dialogs(wdDialogFileSaveAs).Show
With ActiveDocument
Fkill = .FullName
.SaveAs .Name & " " & Format(Date, "yyyy-mm-dd")
End With
Kill Fkill


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of
my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"janey" wrote in message
...
I think I must be missing something!

I want to use this macro in my office templates only.
I started with just one of them e.g. Office1.dot (which I brought
over from Word 2003 to 2007).
I created a macro called FileSaveAs:

Sub FileSaveAs()
'
' FileSaveAs Macro
' Saves a copy of the document in a separate file
'
With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.saveas .Name & " " & Format(Date, "yyyy-mm-dd")
End With
End If
End With
End Sub

I then closed the template and opened a new document based on it.
When I pressed Save and put in a file name, e.g. Test, I got a file
called "Document1 2010-02-28.docx

How do I get this to be: Test 2010-02-28.docx please?

When I have this right, do I have to put the same macro in my other
office templates individually?


"Graham Mayor" wrote in message
...
Instead of naming it FileSaveAs() call it something else and run
it from a toolbar button or suitable keyboard shortcut.
or
Insert the FileSaveAs macro only in the template that requires
it - and not the normal template.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"janey" wrote in message
...
I was very interested in this reply as I save documents in this
way so it will save me having to put the date in each time I
create a document.

However, is there a way of NOT running this macro - e.g. if I am
creating a template which does not need to have the date in the
name?



"Doug Robbins - Word MVP" wrote in
message ...
Use a macro containing the following commands:

With Dialogs(wdDialogFileSaveAs)
If .Display Then
With ActiveDocument
.SaveAs Format(Date, "yyyy-mm-dd") & " " & .Name
End With
End If
End With

If you create the macro with the name of Sub FileSaveAs() in
your normal.dot template or in an add-in, it will run whenever
the FileSaveAs command is used.

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself
of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via
msnews.microsoft.com

wrote in message
...
I have some questions hopefully someone can assist.

I want to save my word documents by default in the d:\path
location
with the following format

"2010-02-26 File Name.doc "- I would like to insert the date
automatically.

Appreciate your assistance.





Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How do I enter a date and then apply automatic date? Ruth_Rob New Users 2 January 1st 09 04:45 PM
automatic date icon in H&F producing an incorrect date Lucille Microsoft Word Help 2 December 9th 08 03:11 PM
Can an automatic document path be set up in Word? hvnbound Microsoft Word Help 2 June 7th 06 03:59 PM
date/time automatic update is off but date still updates. jocasam Microsoft Word Help 2 February 11th 06 03:50 PM
How do I set up automatic file path footers? Stuart Walker Microsoft Word Help 2 September 27th 05 03:25 AM


All times are GMT +1. The time now is 12:18 AM.

Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Microsoft Office Word Forum - WordBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Word"