Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to microsoft.public.word.tables
Mark H. - NJ Mark H. - NJ is offline
external usenet poster
 
Posts: 5
Default Losing indents when copying tables

Hi - I have 3 tables in 3 separate Word 2003 documents. The tables all have
various indents as they were generated from MS Project. I have to copy all
three into one document. Wher I copy the tables they lose their indents. I've
tried everything that I can find and can't prevent this from happening. Does
anyone have any suggestions?
--
Thanks,

Mark H.
  #2   Report Post  
Posted to microsoft.public.word.tables
Stefan Blom[_3_] Stefan Blom[_3_] is offline
external usenet poster
 
Posts: 6,897
Default Losing indents when copying tables

Have you tried any of the Paste Options? As you paste the tables, you should
see the Paste Options button. Click it and experiment with the options (Keep
Source Formatting for example).

--
Stefan Blom
Microsoft Word MVP



"Mark H. - NJ" wrote in message
...
Hi - I have 3 tables in 3 separate Word 2003 documents. The tables all
have
various indents as they were generated from MS Project. I have to copy all
three into one document. Wher I copy the tables they lose their indents.
I've
tried everything that I can find and can't prevent this from happening.
Does
anyone have any suggestions?
--
Thanks,

Mark H.




  #3   Report Post  
Posted to microsoft.public.word.tables
Mark H. - NJ Mark H. - NJ is offline
external usenet poster
 
Posts: 5
Default Losing indents when copying tables

Hi Stefan,

I've tried that with no luck. There's really not very many options on the
Paste Options button (Keep soure formatting, Match destination formatting and
keep text only). I've also tried the various options on the Settings button
on the Edit tab in Options, some of which I thought may be do the trick:

- Adjust sentence and word spacing automatically
- Adjust paragraph spacing on paste
- adjust table formatting and alignment on paste

None of them worked. Any further assistaance that you could provide would be
very much appreciated.

--
Thanks,

Mark H.


"Stefan Blom" wrote:

Have you tried any of the Paste Options? As you paste the tables, you should
see the Paste Options button. Click it and experiment with the options (Keep
Source Formatting for example).

--
Stefan Blom
Microsoft Word MVP



"Mark H. - NJ" wrote in message
...
Hi - I have 3 tables in 3 separate Word 2003 documents. The tables all
have
various indents as they were generated from MS Project. I have to copy all
three into one document. Wher I copy the tables they lose their indents.
I've
tried everything that I can find and can't prevent this from happening.
Does
anyone have any suggestions?
--
Thanks,

Mark H.




.

  #4   Report Post  
Posted to microsoft.public.word.tables
Stefan Blom[_3_] Stefan Blom[_3_] is offline
external usenet poster
 
Posts: 6,897
Default Losing indents when copying tables

It seems as if Word cannot recreate the formatting of tables created in MS
Project, not even as direct formatting. If that is the case, your only
option might be to manually recreate the formatting in Word. Or perhaps you
could insert the tables as OLE objects.

--
Stefan Blom
Microsoft Word MVP



"Mark H. - NJ" wrote in message
...
Hi Stefan,

I've tried that with no luck. There's really not very many options on the
Paste Options button (Keep soure formatting, Match destination formatting
and
keep text only). I've also tried the various options on the Settings
button
on the Edit tab in Options, some of which I thought may be do the trick:

- Adjust sentence and word spacing automatically
- Adjust paragraph spacing on paste
- adjust table formatting and alignment on paste

None of them worked. Any further assistaance that you could provide would
be
very much appreciated.

--
Thanks,

Mark H.


"Stefan Blom" wrote:

Have you tried any of the Paste Options? As you paste the tables, you
should
see the Paste Options button. Click it and experiment with the options
(Keep
Source Formatting for example).

--
Stefan Blom
Microsoft Word MVP



"Mark H. - NJ" wrote in message
...
Hi - I have 3 tables in 3 separate Word 2003 documents. The tables all
have
various indents as they were generated from MS Project. I have to copy
all
three into one document. Wher I copy the tables they lose their
indents.
I've
tried everything that I can find and can't prevent this from happening.
Does
anyone have any suggestions?
--
Thanks,

Mark H.




.



  #5   Report Post  
Posted to microsoft.public.word.tables
Mark H. - NJ Mark H. - NJ is offline
external usenet poster
 
Posts: 5
Default Losing indents when copying tables

Stefan,

We have been able to successfully create the tables in Word with the
indenting intact however, we lose the indenting when the table is pasted. I
just came on board and assumed responsibility for this process and am not
sure how they came up with this means of doing it but the process that we use
is as follows: We save the MS Project as an html file. We then open that html
file in Word and the table is formatted correctly. If I didn't have to paste
the three tables into one document I would be all set. It's when we paste the
tables that we lose the indenting. Any further suggestions that you may have
would be very much appreciated.
--
Thanks!

Mark H.


"Stefan Blom" wrote:

It seems as if Word cannot recreate the formatting of tables created in MS
Project, not even as direct formatting. If that is the case, your only
option might be to manually recreate the formatting in Word. Or perhaps you
could insert the tables as OLE objects.

--
Stefan Blom
Microsoft Word MVP



"Mark H. - NJ" wrote in message
...
Hi Stefan,

I've tried that with no luck. There's really not very many options on the
Paste Options button (Keep soure formatting, Match destination formatting
and
keep text only). I've also tried the various options on the Settings
button
on the Edit tab in Options, some of which I thought may be do the trick:

- Adjust sentence and word spacing automatically
- Adjust paragraph spacing on paste
- adjust table formatting and alignment on paste

None of them worked. Any further assistaance that you could provide would
be
very much appreciated.

--
Thanks,

Mark H.


"Stefan Blom" wrote:

Have you tried any of the Paste Options? As you paste the tables, you
should
see the Paste Options button. Click it and experiment with the options
(Keep
Source Formatting for example).

--
Stefan Blom
Microsoft Word MVP



"Mark H. - NJ" wrote in message
...
Hi - I have 3 tables in 3 separate Word 2003 documents. The tables all
have
various indents as they were generated from MS Project. I have to copy
all
three into one document. Wher I copy the tables they lose their
indents.
I've
tried everything that I can find and can't prevent this from happening.
Does
anyone have any suggestions?
--
Thanks,

Mark H.



.



.



  #6   Report Post  
Posted to microsoft.public.word.tables
Mark H. - NJ Mark H. - NJ is offline
external usenet poster
 
Posts: 5
Default Losing indents when copying tables

Stefan,

I believe that I may have just found a solution to my problem. Rather than
cut/pasting the tables, I did an insert - file and it appears to keep the
indenting. Thanks very much for you help!
--
Mark H.


"Mark H. - NJ" wrote:

Stefan,

We have been able to successfully create the tables in Word with the
indenting intact however, we lose the indenting when the table is pasted. I
just came on board and assumed responsibility for this process and am not
sure how they came up with this means of doing it but the process that we use
is as follows: We save the MS Project as an html file. We then open that html
file in Word and the table is formatted correctly. If I didn't have to paste
the three tables into one document I would be all set. It's when we paste the
tables that we lose the indenting. Any further suggestions that you may have
would be very much appreciated.
--
Thanks!

Mark H.


"Stefan Blom" wrote:

It seems as if Word cannot recreate the formatting of tables created in MS
Project, not even as direct formatting. If that is the case, your only
option might be to manually recreate the formatting in Word. Or perhaps you
could insert the tables as OLE objects.

--
Stefan Blom
Microsoft Word MVP



"Mark H. - NJ" wrote in message
...
Hi Stefan,

I've tried that with no luck. There's really not very many options on the
Paste Options button (Keep soure formatting, Match destination formatting
and
keep text only). I've also tried the various options on the Settings
button
on the Edit tab in Options, some of which I thought may be do the trick:

- Adjust sentence and word spacing automatically
- Adjust paragraph spacing on paste
- adjust table formatting and alignment on paste

None of them worked. Any further assistaance that you could provide would
be
very much appreciated.

--
Thanks,

Mark H.


"Stefan Blom" wrote:

Have you tried any of the Paste Options? As you paste the tables, you
should
see the Paste Options button. Click it and experiment with the options
(Keep
Source Formatting for example).

--
Stefan Blom
Microsoft Word MVP



"Mark H. - NJ" wrote in message
...
Hi - I have 3 tables in 3 separate Word 2003 documents. The tables all
have
various indents as they were generated from MS Project. I have to copy
all
three into one document. Wher I copy the tables they lose their
indents.
I've
tried everything that I can find and can't prevent this from happening.
Does
anyone have any suggestions?
--
Thanks,

Mark H.



.



.

  #7   Report Post  
Posted to microsoft.public.word.tables
Stefan Blom[_3_] Stefan Blom[_3_] is offline
external usenet poster
 
Posts: 6,897
Default Losing indents when copying tables

I'm glad you got it sorted! Thank you for the follow-up.

--
Stefan Blom
Microsoft Word MVP



"Mark H. - NJ" wrote in message
...
Stefan,

I believe that I may have just found a solution to my problem. Rather than
cut/pasting the tables, I did an insert - file and it appears to keep the
indenting. Thanks very much for you help!
--
Mark H.


"Mark H. - NJ" wrote:

Stefan,

We have been able to successfully create the tables in Word with the
indenting intact however, we lose the indenting when the table is pasted.
I
just came on board and assumed responsibility for this process and am not
sure how they came up with this means of doing it but the process that we
use
is as follows: We save the MS Project as an html file. We then open that
html
file in Word and the table is formatted correctly. If I didn't have to
paste
the three tables into one document I would be all set. It's when we paste
the
tables that we lose the indenting. Any further suggestions that you may
have
would be very much appreciated.
--
Thanks!

Mark H.


"Stefan Blom" wrote:

It seems as if Word cannot recreate the formatting of tables created in
MS
Project, not even as direct formatting. If that is the case, your only
option might be to manually recreate the formatting in Word. Or perhaps
you
could insert the tables as OLE objects.

--
Stefan Blom
Microsoft Word MVP



"Mark H. - NJ" wrote in message
...
Hi Stefan,

I've tried that with no luck. There's really not very many options on
the
Paste Options button (Keep soure formatting, Match destination
formatting
and
keep text only). I've also tried the various options on the Settings
button
on the Edit tab in Options, some of which I thought may be do the
trick:

- Adjust sentence and word spacing automatically
- Adjust paragraph spacing on paste
- adjust table formatting and alignment on paste

None of them worked. Any further assistaance that you could provide
would
be
very much appreciated.

--
Thanks,

Mark H.


"Stefan Blom" wrote:

Have you tried any of the Paste Options? As you paste the tables,
you
should
see the Paste Options button. Click it and experiment with the
options
(Keep
Source Formatting for example).

--
Stefan Blom
Microsoft Word MVP



"Mark H. - NJ" wrote in message
...
Hi - I have 3 tables in 3 separate Word 2003 documents. The tables
all
have
various indents as they were generated from MS Project. I have to
copy
all
three into one document. Wher I copy the tables they lose their
indents.
I've
tried everything that I can find and can't prevent this from
happening.
Does
anyone have any suggestions?
--
Thanks,

Mark H.



.



.



Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Losing indents when copying tables Mark H. - NJ Tables 0 March 2nd 10 03:29 PM
Copying sections of document without losing heading numbers. justme123 Page Layout 1 May 14th 08 02:10 PM
hanging indents in tables Cathie100 Tables 2 November 6th 06 10:34 PM
How do I stop width & left indents changing in tables? q1607 Tables 5 April 18th 06 09:03 AM
Copying Autoshapes from Excel to Word: losing formatting Nick Hebb Microsoft Word Help 1 June 2nd 05 01:30 PM


All times are GMT +1. The time now is 11:20 AM.

Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Microsoft Office Word Forum - WordBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Word"