[Lester Lane[_2_]]

Hi, I'm not sure if I have the right approach to this problem but here
goes:

I can have up to 5 sets of fields with each set consisting of 3 fields
per record. Some records only have say 3 sets. On the letter each
set is a separate line. For the 4th and 5th sets rather than get a
supressed row if I simply had one field on its own I end up with some
of the text buried within the merge formula. How can I change my
approach/formula to make sure rows 4 & 5 are totally supressed please?

{ MERGEFIELD "M_2Shares" /f ""}{ IF { MERGEFIELD M_2InvestmentName }
"cash" " shares in { MERGEFIELD M_2InvestmentName /f ""} valued at
£{ MERGEFIELD M_2CurrentValue }" "valued at £{ MERGEFIELD
M_2CurrentValue} }

Correct displays include:
9,764 shares in Edinburgh New Income Trust plc 1p ords (ENI) valued at
£4,064.75
Remainder as Cash valued at £200.00

Using [] to show field data:
[9,764] shares in [Edinburgh New Income Trust plc 1p ords (ENI)]
valued at £[4,064.75]
[Remainder as Cash] valued at [£200.00]

Blank lines that should be supressed show:
shares in valued at £

which is that same if I had the text part outside the IF statement

[Doug Robbins - Word MVP]

I think that your construction should be:

"{ IF { MERGEFIELD M_2InvestmentName } "cash" "{ MERGEFIELD "M_2Shares" /f
" shares in "}{ MERGEFIELD M_2InvestmentName /f " valued at
£"}{ MERGEFIELD M_2CurrentValue }" "valued at £{ MERGEFIELD
M_2CurrentValue}" }

But, I am not sure about the negative result because in your field
construction, I do not see from where the "Remainder as Cash " comes.
--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message
...
Hi, I'm not sure if I have the right approach to this problem but here
goes:

I can have up to 5 sets of fields with each set consisting of 3 fields
per record. Some records only have say 3 sets. On the letter each
set is a separate line. For the 4th and 5th sets rather than get a
supressed row if I simply had one field on its own I end up with some
of the text buried within the merge formula. How can I change my
approach/formula to make sure rows 4 & 5 are totally supressed please?

{ MERGEFIELD "M_2Shares" /f ""}{ IF { MERGEFIELD M_2InvestmentName }
"cash" " shares in { MERGEFIELD M_2InvestmentName /f ""} valued at
£{ MERGEFIELD M_2CurrentValue }" "valued at £{ MERGEFIELD
M_2CurrentValue} }

Correct displays include:
9,764 shares in Edinburgh New Income Trust plc 1p ords (ENI) valued at
£4,064.75
Remainder as Cash valued at £200.00

Using [] to show field data:
[9,764] shares in [Edinburgh New Income Trust plc 1p ords (ENI)]
valued at £[4,064.75]
[Remainder as Cash] valued at [£200.00]

Blank lines that should be supressed show:
shares in valued at £

which is that same if I had the text part outside the IF statement

[Lester Lane[_2_]]

On 31 Mar, 22:29, "Doug Robbins - Word MVP"
wrote:
I think that your construction should be:

"{ IF { MERGEFIELD M_2InvestmentName } "cash" "{ MERGEFIELD "M_2Shares" /f
" shares in "}{ MERGEFIELD M_2InvestmentName */f " valued at
"}{ MERGEFIELD M_2CurrentValue }" "valued at { MERGEFIELD
M_2CurrentValue}" }

But, I am not sure about the negative result because in your field
construction, I do not see from where the "Remainder as Cash " comes.
--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message

...

Hi, I'm not sure if I have the right approach to this problem but here
goes:

I can have up to 5 sets of fields with each set consisting of 3 fields
per record. *Some records only have say 3 sets. *On the letter each
set is a separate line. *For the 4th and 5th sets rather than get a
supressed row if I simply had one field on its own I end up with some
of the text buried within the merge formula. *How can I change my
approach/formula to make sure rows 4 & 5 are totally supressed please?

{ MERGEFIELD "M_2Shares" /f ""}{ IF { MERGEFIELD M_2InvestmentName }
"cash" " shares in { MERGEFIELD M_2InvestmentName */f ""} valued at
{ MERGEFIELD M_2CurrentValue }" "valued at { MERGEFIELD
M_2CurrentValue} }

Correct displays include:
9,764 shares in Edinburgh New Income Trust plc 1p ords (ENI) valued at
4,064.75
Remainder as Cash valued at 200.00

Using [] to show field data:
[9,764] shares in [Edinburgh New Income Trust plc 1p ords (ENI)]
valued at [4,064.75]
[Remainder as Cash] valued at [ 200.00]

Blank lines that should be supressed show:
shares in *valued at

which is that same if I had the text part outside the IF statement

Brilliant, thanks. I now understand the /f part and how to edit it!
I ended up with:
"{ IF { MERGEFIELD M_2InvestmentName } "cash" "{ MERGEFIELD
M_2Shares /f
" shares in "}{ MERGEFIELD M_2InvestmentName /f " valued at
£"}{ MERGEFIELD M_2CurrentValue }" "Cash valued at £{ MERGEFIELD
M_2CurrentValue}" }

"Remainder as Cash" was in the Shares field but now I can remove this
and leave the field blank, which is neater. However I still don't
have this formulae able to supress itself if there is nothing in any
of the 3 fields. Any ideas on that please?

[Doug Robbins - Word MVP]

I am assuming that what you want to suppress is a blank line. To do that,
start the field construction at the end of the previous line and insert a
carriage return (or Shift +Enter) where the ¶ appears in the following
construction

{ IF { MERGEFIELD M_2InvestmentName } "cash" "¶
{ MERGEFIELD M_2Shares /f " shares in "}{ MERGEFIELD M_2InvestmentName /f "
valued at
£"}{ MERGEFIELD M_2CurrentValue }" { IF { MERGEFIELD M_2CurrentValue } 0
"¶
Cash valued at £{ MERGEFIELD M_2CurrentValue}" "" } }


--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message
...
On 31 Mar, 22:29, "Doug Robbins - Word MVP"
wrote:
I think that your construction should be:

"{ IF { MERGEFIELD M_2InvestmentName } "cash" "{ MERGEFIELD "M_2Shares"
/f
" shares in "}{ MERGEFIELD M_2InvestmentName /f " valued at
"}{ MERGEFIELD M_2CurrentValue }" "valued at { MERGEFIELD
M_2CurrentValue}" }

But, I am not sure about the negative result because in your field
construction, I do not see from where the "Remainder as Cash " comes.
--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message

...

Hi, I'm not sure if I have the right approach to this problem but here
goes:

I can have up to 5 sets of fields with each set consisting of 3 fields
per record. Some records only have say 3 sets. On the letter each
set is a separate line. For the 4th and 5th sets rather than get a
supressed row if I simply had one field on its own I end up with some
of the text buried within the merge formula. How can I change my
approach/formula to make sure rows 4 & 5 are totally supressed please?

{ MERGEFIELD "M_2Shares" /f ""}{ IF { MERGEFIELD M_2InvestmentName }
"cash" " shares in { MERGEFIELD M_2InvestmentName /f ""} valued at
{ MERGEFIELD M_2CurrentValue }" "valued at { MERGEFIELD
M_2CurrentValue} }

Correct displays include:
9,764 shares in Edinburgh New Income Trust plc 1p ords (ENI) valued at
4,064.75
Remainder as Cash valued at 200.00

Using [] to show field data:
[9,764] shares in [Edinburgh New Income Trust plc 1p ords (ENI)]
valued at [4,064.75]
[Remainder as Cash] valued at [ 200.00]

Blank lines that should be supressed show:
shares in valued at

which is that same if I had the text part outside the IF statement

Brilliant, thanks. I now understand the /f part and how to edit it!
I ended up with:
"{ IF { MERGEFIELD M_2InvestmentName } "cash" "{ MERGEFIELD
M_2Shares /f
" shares in "}{ MERGEFIELD M_2InvestmentName /f " valued at
£"}{ MERGEFIELD M_2CurrentValue }" "Cash valued at £{ MERGEFIELD
M_2CurrentValue}" }

"Remainder as Cash" was in the Shares field but now I can remove this
and leave the field blank, which is neater. However I still don't
have this formulae able to supress itself if there is nothing in any
of the 3 fields. Any ideas on that please?

[Lester Lane[_2_]]

On 1 Apr, 22:33, "Doug Robbins - Word MVP"
wrote:
I am assuming that what you want to suppress is a blank line. *To do that,
start the field construction at the end of the previous line and insert a
carriage return (or Shift +Enter) where the ¶ appears in the following
construction

{ IF { MERGEFIELD M_2InvestmentName } "cash" "¶
{ MERGEFIELD M_2Shares /f " shares in "}{ MERGEFIELD M_2InvestmentName */f "
valued at
£"}{ MERGEFIELD M_2CurrentValue }" { IF { MERGEFIELD M_2CurrentValue } 0
"¶
Cash valued at £{ MERGEFIELD M_2CurrentValue}" "" } }

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message

...

On 31 Mar, 22:29, "Doug Robbins - Word MVP"
wrote:
I think that your construction should be:

"{ IF { MERGEFIELD M_2InvestmentName } "cash" "{ MERGEFIELD "M_2Shares"
/f
" shares in "}{ MERGEFIELD M_2InvestmentName */f " valued at
"}{ MERGEFIELD M_2CurrentValue }" "valued at { MERGEFIELD
M_2CurrentValue}" }

But, I am not sure about the negative result because in your field
construction, I do not see from where the "Remainder as Cash " comes.
--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message

....

Hi, I'm not sure if I have the right approach to this problem but here
goes:

I can have up to 5 sets of fields with each set consisting of 3 fields
per record. *Some records only have say 3 sets. *On the letter each
set is a separate line. *For the 4th and 5th sets rather than get a
supressed row if I simply had one field on its own I end up with some
of the text buried within the merge formula. *How can I change my
approach/formula to make sure rows 4 & 5 are totally supressed please?

{ MERGEFIELD "M_2Shares" /f ""}{ IF { MERGEFIELD M_2InvestmentName }
"cash" " shares in { MERGEFIELD M_2InvestmentName */f ""} valued at
{ MERGEFIELD M_2CurrentValue }" "valued at { MERGEFIELD
M_2CurrentValue} }

Correct displays include:
9,764 shares in Edinburgh New Income Trust plc 1p ords (ENI) valued at
4,064.75
Remainder as Cash valued at 200.00

Using [] to show field data:
[9,764] shares in [Edinburgh New Income Trust plc 1p ords (ENI)]
valued at [4,064.75]
[Remainder as Cash] valued at [ 200.00]

Blank lines that should be supressed show:
shares in *valued at

which is that same if I had the text part outside the IF statement

Brilliant, thanks. *I now understand the /f part and how to edit it!
I ended up with:
"{ IF { MERGEFIELD M_2InvestmentName } "cash" "{ MERGEFIELD
M_2Shares /f
" shares in "}{ MERGEFIELD M_2InvestmentName */f " valued at
£"}{ MERGEFIELD M_2CurrentValue }" "Cash valued at £{ MERGEFIELD
M_2CurrentValue}" }

"Remainder as Cash" was in the Shares field but now I can remove this
and leave the field blank, which is neater. *However I still don't
have this formulae able to supress itself if there is nothing in any
of the 3 fields. *Any ideas on that please?

Not quite. The above suggestion gives me extra blank rows. I have
noticed that if on each line I simply have say the Shares field so the
first line is {MERGEFIELD M_1Shares} and the 5th line has {MERGEFIELD
M_5Shares} if the 4th and 5th Shares fields are blank then lines 4 and
5 do not appear at all. They are not blank, they simply vanish. If I
swap the simple merge fields for the complex IF statement then lines 4
and 5 are there but they are blank. Ideally I would like them to
"vanish" also. Hope that is clearer.

[Doug Robbins - Word MVP]

It will be easier to sort this out if you can send me the mail merge main
document and some "dummy" records that cover the range of combinations of
data that you are trying to handle.

You can send it to dkr[atsymbol]mvps[dot]org

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message
...
On 1 Apr, 22:33, "Doug Robbins - Word MVP"
wrote:
I am assuming that what you want to suppress is a blank line. To do
that,
start the field construction at the end of the previous line and insert a
carriage return (or Shift +Enter) where the ¶ appears in the following
construction

{ IF { MERGEFIELD M_2InvestmentName } "cash" "¶
{ MERGEFIELD M_2Shares /f " shares in "}{ MERGEFIELD M_2InvestmentName
/f "
valued at
£"}{ MERGEFIELD M_2CurrentValue }" { IF { MERGEFIELD M_2CurrentValue }
0
"¶
Cash valued at £{ MERGEFIELD M_2CurrentValue}" "" } }

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message

...

On 31 Mar, 22:29, "Doug Robbins - Word MVP"
wrote:
I think that your construction should be:

"{ IF { MERGEFIELD M_2InvestmentName } "cash" "{ MERGEFIELD
"M_2Shares"
/f
" shares in "}{ MERGEFIELD M_2InvestmentName /f " valued at
"}{ MERGEFIELD M_2CurrentValue }" "valued at { MERGEFIELD
M_2CurrentValue}" }

But, I am not sure about the negative result because in your field
construction, I do not see from where the "Remainder as Cash " comes.
--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message

...

Hi, I'm not sure if I have the right approach to this problem but
here
goes:

I can have up to 5 sets of fields with each set consisting of 3
fields
per record. Some records only have say 3 sets. On the letter each
set is a separate line. For the 4th and 5th sets rather than get a
supressed row if I simply had one field on its own I end up with
some
of the text buried within the merge formula. How can I change my
approach/formula to make sure rows 4 & 5 are totally supressed
please?

{ MERGEFIELD "M_2Shares" /f ""}{ IF { MERGEFIELD M_2InvestmentName }
"cash" " shares in { MERGEFIELD M_2InvestmentName /f ""} valued
at
{ MERGEFIELD M_2CurrentValue }" "valued at { MERGEFIELD
M_2CurrentValue} }

Correct displays include:
9,764 shares in Edinburgh New Income Trust plc 1p ords (ENI) valued
at
4,064.75
Remainder as Cash valued at 200.00

Using [] to show field data:
[9,764] shares in [Edinburgh New Income Trust plc 1p ords (ENI)]
valued at [4,064.75]
[Remainder as Cash] valued at [ 200.00]

Blank lines that should be supressed show:
shares in valued at

which is that same if I had the text part outside the IF statement

Brilliant, thanks. I now understand the /f part and how to edit it!
I ended up with:
"{ IF { MERGEFIELD M_2InvestmentName } "cash" "{ MERGEFIELD
M_2Shares /f
" shares in "}{ MERGEFIELD M_2InvestmentName /f " valued at
£"}{ MERGEFIELD M_2CurrentValue }" "Cash valued at £{ MERGEFIELD
M_2CurrentValue}" }

"Remainder as Cash" was in the Shares field but now I can remove this
and leave the field blank, which is neater. However I still don't
have this formulae able to supress itself if there is nothing in any
of the 3 fields. Any ideas on that please?

Not quite. The above suggestion gives me extra blank rows. I have
noticed that if on each line I simply have say the Shares field so the
first line is {MERGEFIELD M_1Shares} and the 5th line has {MERGEFIELD
M_5Shares} if the 4th and 5th Shares fields are blank then lines 4 and
5 do not appear at all. They are not blank, they simply vanish. If I
swap the simple merge fields for the complex IF statement then lines 4
and 5 are there but they are blank. Ideally I would like them to
"vanish" also. Hope that is clearer.

[Lester Lane[_2_]]

On 6 Apr, 22:21, "Doug Robbins - Word MVP"
wrote:
It will be easier to sort this out if you can send me the mail merge main
document and some "dummy" records that cover the range of combinations of
data that you are trying to handle.

You can send it to dkr[atsymbol]mvps[dot]org

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message

...

On 1 Apr, 22:33, "Doug Robbins - Word MVP"
wrote:
I am assuming that what you want to suppress is a blank line. *To do
that,
start the field construction at the end of the previous line and insert a
carriage return (or Shift +Enter) where the ¶ appears in the following
construction

{ IF { MERGEFIELD M_2InvestmentName } "cash" "¶
{ MERGEFIELD M_2Shares /f " shares in "}{ MERGEFIELD M_2InvestmentName
/f "
valued at
£"}{ MERGEFIELD M_2CurrentValue }" { IF { MERGEFIELD M_2CurrentValue }
0
"¶
Cash valued at £{ MERGEFIELD M_2CurrentValue}" "" } }

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message

....

On 31 Mar, 22:29, "Doug Robbins - Word MVP"
wrote:
I think that your construction should be:

"{ IF { MERGEFIELD M_2InvestmentName } "cash" "{ MERGEFIELD
"M_2Shares"
/f
" shares in "}{ MERGEFIELD M_2InvestmentName */f " valued at
"}{ MERGEFIELD M_2CurrentValue }" "valued at { MERGEFIELD
M_2CurrentValue}" }

But, I am not sure about the negative result because in your field
construction, I do not see from where the "Remainder as Cash " comes.
--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message

...

Hi, I'm not sure if I have the right approach to this problem but
here
goes:

I can have up to 5 sets of fields with each set consisting of 3
fields
per record. *Some records only have say 3 sets. *On the letter each
set is a separate line. *For the 4th and 5th sets rather than get a
supressed row if I simply had one field on its own I end up with
some
of the text buried within the merge formula. *How can I change my
approach/formula to make sure rows 4 & 5 are totally supressed
please?

{ MERGEFIELD "M_2Shares" /f ""}{ IF { MERGEFIELD M_2InvestmentName }
"cash" " shares in { MERGEFIELD M_2InvestmentName */f ""} valued
at
{ MERGEFIELD M_2CurrentValue }" "valued at { MERGEFIELD
M_2CurrentValue} }

Correct displays include:
9,764 shares in Edinburgh New Income Trust plc 1p ords (ENI) valued
at
4,064.75
Remainder as Cash valued at 200.00

Using [] to show field data:
[9,764] shares in [Edinburgh New Income Trust plc 1p ords (ENI)]
valued at [4,064.75]
[Remainder as Cash] valued at [ 200.00]

Blank lines that should be supressed show:
shares in *valued at

which is that same if I had the text part outside the IF statement

Brilliant, thanks. *I now understand the /f part and how to edit it!
I ended up with:
"{ IF { MERGEFIELD M_2InvestmentName } "cash" "{ MERGEFIELD
M_2Shares /f
" shares in "}{ MERGEFIELD M_2InvestmentName */f " valued at
£"}{ MERGEFIELD M_2CurrentValue }" "Cash valued at £{ MERGEFIELD
M_2CurrentValue}" }

"Remainder as Cash" was in the Shares field but now I can remove this
and leave the field blank, which is neater. *However I still don't
have this formulae able to supress itself if there is nothing in any
of the 3 fields. *Any ideas on that please?

Not quite. *The above suggestion gives me extra blank rows. *I have
noticed that if on each line I simply have say the Shares field so the
first line is {MERGEFIELD M_1Shares} and the 5th line has {MERGEFIELD
M_5Shares} if the 4th and 5th Shares fields are blank then lines 4 and
5 do not appear at all. *They are not blank, they simply vanish. *If I
swap the simple merge fields for the complex IF statement then lines 4
and 5 are there but they are blank. *Ideally I would like them to
"vanish" also. *Hope that is clearer.

Thanks for the offer but I can't get your email to work - even with uk
at the end...

[Doug Robbins - Word MVP]

Replace the parts inside the [ ] with the obvious

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message
...
On 6 Apr, 22:21, "Doug Robbins - Word MVP"
wrote:
It will be easier to sort this out if you can send me the mail merge main
document and some "dummy" records that cover the range of combinations of
data that you are trying to handle.

You can send it to dkr[atsymbol]mvps[dot]org

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message

...

On 1 Apr, 22:33, "Doug Robbins - Word MVP"
wrote:
I am assuming that what you want to suppress is a blank line. To do
that,
start the field construction at the end of the previous line and
insert a
carriage return (or Shift +Enter) where the ¶ appears in the following
construction

{ IF { MERGEFIELD M_2InvestmentName } "cash" "¶
{ MERGEFIELD M_2Shares /f " shares in "}{ MERGEFIELD M_2InvestmentName
/f "
valued at
£"}{ MERGEFIELD M_2CurrentValue }" { IF { MERGEFIELD M_2CurrentValue }

0
"¶
Cash valued at £{ MERGEFIELD M_2CurrentValue}" "" } }

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message

...

On 31 Mar, 22:29, "Doug Robbins - Word MVP"

wrote:
I think that your construction should be:

"{ IF { MERGEFIELD M_2InvestmentName } "cash" "{ MERGEFIELD
"M_2Shares"
/f
" shares in "}{ MERGEFIELD M_2InvestmentName /f " valued at
"}{ MERGEFIELD M_2CurrentValue }" "valued at { MERGEFIELD
M_2CurrentValue}" }

But, I am not sure about the negative result because in your field
construction, I do not see from where the "Remainder as Cash "
comes.
--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of
my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message

...

Hi, I'm not sure if I have the right approach to this problem but
here
goes:

I can have up to 5 sets of fields with each set consisting of 3
fields
per record. Some records only have say 3 sets. On the letter
each
set is a separate line. For the 4th and 5th sets rather than get
a
supressed row if I simply had one field on its own I end up with
some
of the text buried within the merge formula. How can I change my
approach/formula to make sure rows 4 & 5 are totally supressed
please?

{ MERGEFIELD "M_2Shares" /f ""}{ IF { MERGEFIELD
M_2InvestmentName }
"cash" " shares in { MERGEFIELD M_2InvestmentName /f ""}
valued
at
{ MERGEFIELD M_2CurrentValue }" "valued at { MERGEFIELD
M_2CurrentValue} }

Correct displays include:
9,764 shares in Edinburgh New Income Trust plc 1p ords (ENI)
valued
at
4,064.75
Remainder as Cash valued at 200.00

Using [] to show field data:
[9,764] shares in [Edinburgh New Income Trust plc 1p ords (ENI)]
valued at [4,064.75]
[Remainder as Cash] valued at [ 200.00]

Blank lines that should be supressed show:
shares in valued at

which is that same if I had the text part outside the IF
statement

Brilliant, thanks. I now understand the /f part and how to edit it!
I ended up with:
"{ IF { MERGEFIELD M_2InvestmentName } "cash" "{ MERGEFIELD
M_2Shares /f
" shares in "}{ MERGEFIELD M_2InvestmentName /f " valued at
£"}{ MERGEFIELD M_2CurrentValue }" "Cash valued at £{ MERGEFIELD
M_2CurrentValue}" }

"Remainder as Cash" was in the Shares field but now I can remove
this
and leave the field blank, which is neater. However I still don't
have this formulae able to supress itself if there is nothing in any
of the 3 fields. Any ideas on that please?

Not quite. The above suggestion gives me extra blank rows. I have
noticed that if on each line I simply have say the Shares field so the
first line is {MERGEFIELD M_1Shares} and the 5th line has {MERGEFIELD
M_5Shares} if the 4th and 5th Shares fields are blank then lines 4 and
5 do not appear at all. They are not blank, they simply vanish. If I
swap the simple merge fields for the complex IF statement then lines 4
and 5 are there but they are blank. Ideally I would like them to
"vanish" also. Hope that is clearer.

Thanks for the offer but I can't get your email to work - even with uk
at the end...

[Lester Lane[_2_]]

On 12 Apr, 22:25, "Doug Robbins - Word MVP"
wrote:
Replace the parts inside the [ ] with the obvious

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message

...

On 6 Apr, 22:21, "Doug Robbins - Word MVP"
wrote:
It will be easier to sort this out if you can send me the mail merge main
document and some "dummy" records that cover the range of combinations of
data that you are trying to handle.

You can send it to dkr[atsymbol]mvps[dot]org

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message

....

On 1 Apr, 22:33, "Doug Robbins - Word MVP"
wrote:
I am assuming that what you want to suppress is a blank line. *To do
that,
start the field construction at the end of the previous line and
insert a
carriage return (or Shift +Enter) where the ¶ appears in the following
construction

{ IF { MERGEFIELD M_2InvestmentName } "cash" "¶
{ MERGEFIELD M_2Shares /f " shares in "}{ MERGEFIELD M_2InvestmentName
/f "
valued at
£"}{ MERGEFIELD M_2CurrentValue }" { IF { MERGEFIELD M_2CurrentValue }

0
"¶
Cash valued at £{ MERGEFIELD M_2CurrentValue}" "" } }

--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message

...

On 31 Mar, 22:29, "Doug Robbins - Word MVP"

wrote:
I think that your construction should be:

"{ IF { MERGEFIELD M_2InvestmentName } "cash" "{ MERGEFIELD
"M_2Shares"
/f
" shares in "}{ MERGEFIELD M_2InvestmentName */f " valued at
"}{ MERGEFIELD M_2CurrentValue }" "valued at { MERGEFIELD
M_2CurrentValue}" }

But, I am not sure about the negative result because in your field
construction, I do not see from where the "Remainder as Cash "
comes.
--
Hope this helps.

Please reply to the newsgroup unless you wish to avail yourself of
my
services on a paid consulting basis.

Doug Robbins - Word MVP, originally posted via msnews.microsoft.com

"Lester Lane" wrote in message

...

Hi, I'm not sure if I have the right approach to this problem but
here
goes:

I can have up to 5 sets of fields with each set consisting of 3
fields
per record. *Some records only have say 3 sets. *On the letter
each
set is a separate line. *For the 4th and 5th sets rather than get
a
supressed row if I simply had one field on its own I end up with
some
of the text buried within the merge formula. *How can I change my
approach/formula to make sure rows 4 & 5 are totally supressed
please?

{ MERGEFIELD "M_2Shares" /f ""}{ IF { MERGEFIELD
M_2InvestmentName }
"cash" " shares in { MERGEFIELD M_2InvestmentName */f ""}
valued
at
{ MERGEFIELD M_2CurrentValue }" "valued at { MERGEFIELD
M_2CurrentValue} }

Correct displays include:
9,764 shares in Edinburgh New Income Trust plc 1p ords (ENI)
valued
at
4,064.75
Remainder as Cash valued at 200.00

Using [] to show field data:
[9,764] shares in [Edinburgh New Income Trust plc 1p ords (ENI)]
valued at [4,064.75]
[Remainder as Cash] valued at [ 200.00]

Blank lines that should be supressed show:
shares in *valued at

which is that same if I had the text part outside the IF
statement

Brilliant, thanks. *I now understand the /f part and how to edit it!
I ended up with:
"{ IF { MERGEFIELD M_2InvestmentName } "cash" "{ MERGEFIELD
M_2Shares /f
" shares in "}{ MERGEFIELD M_2InvestmentName */f " valued at
£"}{ MERGEFIELD M_2CurrentValue }" "Cash valued at £{ MERGEFIELD
M_2CurrentValue}" }

"Remainder as Cash" was in the Shares field but now I can remove
this
and leave the field blank, which is neater. *However I still don't
have this formulae able to supress itself if there is nothing in any
of the 3 fields. *Any ideas on that please?

Not quite. *The above suggestion gives me extra blank rows. *I have
noticed that if on each line I simply have say the Shares field so the
first line is {MERGEFIELD M_1Shares} and the 5th line has {MERGEFIELD
M_5Shares} if the 4th and 5th Shares fields are blank then lines 4 and
5 do not appear at all. *They are not blank, they simply vanish. *If I
swap the simple merge fields for the complex IF statement then lines 4
and 5 are there but they are blank. *Ideally I would like them to
"vanish" also. *Hope that is clearer.

Thanks for the offer but I can't get your email to work - even with uk
at the end...

Ironically it would seem that your postmaster does not like Word
attachments!! I have put them in a zip....