Home |
Search |
Today's Posts |
#2
Posted to microsoft.public.word.docmanagement,microsoft.public.word.mailmerge.fields
|
|||
|
|||
Mail Merge with attachments
The one thing that I do know about this, is that everything must be done
just right otherwise it will not work. The Express Click Yes warning should only appear one time. If it appears for each record, then there must be something else going on. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "Graham Mayor" wrote in message ... I assume that you are using the macro prepared by fellow MVP Doug Robbins at http://word.mvps.org/FAQs/MailMerge/...ttachments.htm. I am not sure whether Doug reads this forum, so you would be better posting in the Word mailmerge forum, to which I have cross posted this reply (See http://www.gmayor.com/MSNews.htm for easier access) but a good start would be to see http://www.gmayor.com/mailmerge_from_outlook.htm to eliminate checking all those unrequired contacts. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org wrote: Greetings. I have followed the white papers from word.mvps.org, but it isn't working, so I have some questions regarding the white paper and using a mail merge with an attachment. I am doing this procedure on a laptop with Windows XP Pro and both Office XP and Office 2003 installed, but they are both separate of each other and I am using the Office 2003 version of Outlook and Word. I just want to send a mass e-mail that has an attachment and I think the attachment portion of this is what's causing the problem. The attachment is a PDF file with some graphics and formatting features that would not work in an e-mail, but it is still under 100kb in size. To begin with, I have 1100 contacts in my Contacts folder in Outlook 2003. I only want to send it to two people, as a test, so that's how I did it this time. One person was numbered at #428 and the other was #979. I followed the directions on making the Directory file and when that stuff was all done it properly displayed the two recipients. The problem occurs when it brings up that macro warning window, in which I am to reply Yes, No, or Cancel. I do have ExpressClick running, and each time the window appears, it is only displayed for 6 seconds, then it disappears, then reappears for another 6 seconds, and so on, and so forth. I started this process at 3:30pm yesterday and it was still doing it at 9am this morning; I promptly ended it. I figured that it should have stopped doing it after the two people were selected (assuming each macro warning window has a 1:1 ratio with the contacts I selected), so after 12 seconds, but even if it went through all 1100 contacts, it still should have finished in under 2 hours. Granted, if each contact/recipient gets that macro warning window multiple times, then that obviously would make the process take significantly longer. If there could be some clarification on how many times that window shows up per person, that would be helpful on my end. Did I do something wrong/stray from the instructions? Obviously not having you watch over my shoulder makes it hard to answer that question, but where should I be looking for the problem? Is it with the attachment? Is it with my Directory file? Does anyone recommend a third-party provider that will do what I need? Is there a better piece of code out there that I should be using?. Thank you for helping me out. Have a wonderful day! |
#3
Posted to microsoft.public.word.docmanagement,microsoft.public.word.mailmerge.fields
|
|||
|
|||
Mail Merge with attachments
You are correct in your assumption. I have sent an e-mail to that
website, but it mentioned that it would be best to post. I assumed posting here, nor did I notice the forum there, but I will put it out there as well. Doug Robbins has replied to my posting, but I will still put something out there for more eyes to see. I will also look at your supplied links and see where that takes me. Thank you for your follow-up! Graham Mayor wrote: I assume that you are using the macro prepared by fellow MVP Doug Robbins at http://word.mvps.org/FAQs/MailMerge/...ttachments.htm. I am not sure whether Doug reads this forum, so you would be better posting in the Word mailmerge forum, to which I have cross posted this reply (See http://www.gmayor.com/MSNews.htm for easier access) but a good start would be to see http://www.gmayor.com/mailmerge_from_outlook.htm to eliminate checking all those unrequired contacts. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org wrote: Greetings. I have followed the white papers from word.mvps.org, but it isn't working, so I have some questions regarding the white paper and using a mail merge with an attachment. I am doing this procedure on a laptop with Windows XP Pro and both Office XP and Office 2003 installed, but they are both separate of each other and I am using the Office 2003 version of Outlook and Word. I just want to send a mass e-mail that has an attachment and I think the attachment portion of this is what's causing the problem. The attachment is a PDF file with some graphics and formatting features that would not work in an e-mail, but it is still under 100kb in size. To begin with, I have 1100 contacts in my Contacts folder in Outlook 2003. I only want to send it to two people, as a test, so that's how I did it this time. One person was numbered at #428 and the other was #979. I followed the directions on making the Directory file and when that stuff was all done it properly displayed the two recipients. The problem occurs when it brings up that macro warning window, in which I am to reply Yes, No, or Cancel. I do have ExpressClick running, and each time the window appears, it is only displayed for 6 seconds, then it disappears, then reappears for another 6 seconds, and so on, and so forth. I started this process at 3:30pm yesterday and it was still doing it at 9am this morning; I promptly ended it. I figured that it should have stopped doing it after the two people were selected (assuming each macro warning window has a 1:1 ratio with the contacts I selected), so after 12 seconds, but even if it went through all 1100 contacts, it still should have finished in under 2 hours. Granted, if each contact/recipient gets that macro warning window multiple times, then that obviously would make the process take significantly longer. If there could be some clarification on how many times that window shows up per person, that would be helpful on my end. Did I do something wrong/stray from the instructions? Obviously not having you watch over my shoulder makes it hard to answer that question, but where should I be looking for the problem? Is it with the attachment? Is it with my Directory file? Does anyone recommend a third-party provider that will do what I need? Is there a better piece of code out there that I should be using?. Thank you for helping me out. Have a wonderful day! |
#4
Posted to microsoft.public.word.docmanagement,microsoft.public.word.mailmerge.fields
|
|||
|
|||
Mail Merge with attachments
Thank you for the response. The Express Click Yes warning appears
every 6 seconds, so apparently something else is going on. I will go back through and follow the directions again for several more times and see if I come up with different results. Thank you again for your assistance. Doug Robbins - Word MVP wrote: The one thing that I do know about this, is that everything must be done just right otherwise it will not work. The Express Click Yes warning should only appear one time. If it appears for each record, then there must be something else going on. -- Hope this helps. Please reply to the newsgroup unless you wish to avail yourself of my services on a paid consulting basis. Doug Robbins - Word MVP "Graham Mayor" wrote in message ... I assume that you are using the macro prepared by fellow MVP Doug Robbins at http://word.mvps.org/FAQs/MailMerge/...ttachments.htm. I am not sure whether Doug reads this forum, so you would be better posting in the Word mailmerge forum, to which I have cross posted this reply (See http://www.gmayor.com/MSNews.htm for easier access) but a good start would be to see http://www.gmayor.com/mailmerge_from_outlook.htm to eliminate checking all those unrequired contacts. -- Graham Mayor - Word MVP My web site www.gmayor.com Word MVP web site http://word.mvps.org wrote: Greetings. I have followed the white papers from word.mvps.org, but it isn't working, so I have some questions regarding the white paper and using a mail merge with an attachment. I am doing this procedure on a laptop with Windows XP Pro and both Office XP and Office 2003 installed, but they are both separate of each other and I am using the Office 2003 version of Outlook and Word. I just want to send a mass e-mail that has an attachment and I think the attachment portion of this is what's causing the problem. The attachment is a PDF file with some graphics and formatting features that would not work in an e-mail, but it is still under 100kb in size. To begin with, I have 1100 contacts in my Contacts folder in Outlook 2003. I only want to send it to two people, as a test, so that's how I did it this time. One person was numbered at #428 and the other was #979. I followed the directions on making the Directory file and when that stuff was all done it properly displayed the two recipients. The problem occurs when it brings up that macro warning window, in which I am to reply Yes, No, or Cancel. I do have ExpressClick running, and each time the window appears, it is only displayed for 6 seconds, then it disappears, then reappears for another 6 seconds, and so on, and so forth. I started this process at 3:30pm yesterday and it was still doing it at 9am this morning; I promptly ended it. I figured that it should have stopped doing it after the two people were selected (assuming each macro warning window has a 1:1 ratio with the contacts I selected), so after 12 seconds, but even if it went through all 1100 contacts, it still should have finished in under 2 hours. Granted, if each contact/recipient gets that macro warning window multiple times, then that obviously would make the process take significantly longer. If there could be some clarification on how many times that window shows up per person, that would be helpful on my end. Did I do something wrong/stray from the instructions? Obviously not having you watch over my shoulder makes it hard to answer that question, but where should I be looking for the problem? Is it with the attachment? Is it with my Directory file? Does anyone recommend a third-party provider that will do what I need? Is there a better piece of code out there that I should be using?. Thank you for helping me out. Have a wonderful day! |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
NO CODE - mail merge to Outlook with attachment with CC | Mailmerge | |||
Mail Merge Losing Data | Mailmerge | |||
Mail Merge to E-mail with Attachments | Mailmerge | |||
mail merge with attachments | Mailmerge | |||
How do you add attachments in Word for mail merge emails? | Tables |