When printing in Word 2007 beta, the text gets miniaturized up into the left
corner. (on a HP PSC1315) it doesnt matter if it's an old word 03 document, a
copy'ed/paste'd text, or completely new text in a new document. When
printing, it miniaturizes it.
Unfurtunately this completely rules out using the word 07 beta in my daily
work - a darn shame because the UI seems very easy to use, which i had looked
forward to.

Anyone else have that printing problem or a solution to it?

Same problem. Haven't tried anyother printers yet but currently using HP
7110. Printing looks normal in print preview but miniaturized ( looks almost
like a thumb view) on printing.

(New tool bars will take some getting used to... but I said that too when I
moved from sidekick to work 1.0!)

--
Regards neil

If you can't do it first do it better


"isthis" wrote:

When printing in Word 2007 beta, the text gets miniaturized up into the left
corner. (on a HP PSC1315) it doesnt matter if it's an old word 03 document, a
copy'ed/paste'd text, or completely new text in a new document. When
printing, it miniaturizes it.
Unfurtunately this completely rules out using the word 07 beta in my daily
work - a darn shame because the UI seems very easy to use, which i had looked
forward to.

Anyone else have that printing problem or a solution to it?

--
Deusenberg


"Neil M" wrote:


Same problem. Haven't tried anyother printers yet but currently using HP
7110. Printing looks normal in print preview but miniaturized ( looks almost
like a thumb view) on printing.

(New tool bars will take some getting used to... but I said that too when I
moved from sidekick to work 1.0!)

--
Regards neil

If you can't do it first do it better


"isthis" wrote:

When printing in Word 2007 beta, the text gets miniaturized up into the left
corner. (on a HP PSC1315) it doesnt matter if it's an old word 03 document, a
copy'ed/paste'd text, or completely new text in a new document. When
printing, it miniaturizes it.
Unfurtunately this completely rules out using the word 07 beta in my daily
work - a darn shame because the UI seems very easy to use, which i had looked
forward to.

Anyone else have that printing problem or a solution to it?

I am having a similiar. However, mine only occurs when I try to print a range
or the current page. If I am printing the entire document, it is ok.

"isthis" wrote:

When printing in Word 2007 beta, the text gets miniaturized up into the left
corner. (on a HP PSC1315) it doesnt matter if it's an old word 03 document, a
copy'ed/paste'd text, or completely new text in a new document. When
printing, it miniaturizes it.
Unfurtunately this completely rules out using the word 07 beta in my daily
work - a darn shame because the UI seems very easy to use, which i had looked
forward to.

Anyone else have that printing problem or a solution to it?

Well todays a new day and the problem cleared all by it's self. Was going to
spend some time trying to debug and figure what I could and it printed
correctly first try.

Now on Sunday, I reboot a few times and changed lots of options all with no
effect.

If the problems comes back I'll update this thread.
--
Regards neil

"If you can''''t do it first do it better"


"Neil M" wrote:


Same problem. Haven't tried anyother printers yet but currently using HP
7110. Printing looks normal in print preview but miniaturized ( looks almost
like a thumb view) on printing.

(New tool bars will take some getting used to... but I said that too when I
moved from sidekick to work 1.0!)

--
Regards neil

If you can't do it first do it better


"isthis" wrote:

When printing in Word 2007 beta, the text gets miniaturized up into the left
corner. (on a HP PSC1315) it doesnt matter if it's an old word 03 document, a
copy'ed/paste'd text, or completely new text in a new document. When
printing, it miniaturizes it.
Unfurtunately this completely rules out using the word 07 beta in my daily
work - a darn shame because the UI seems very easy to use, which i had looked
forward to.

Anyone else have that printing problem or a solution to it?

Historically HP drivers have been crap - they even keep quiet about the fact
that they have beta drivers available for a variety of issues. The latest
ones are at http://www.hp.com/pond/ljbeta/ No guarantee that they will fix
your problems ... yet

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



isthis wrote:
When printing in Word 2007 beta, the text gets miniaturized up into
the left corner. (on a HP PSC1315) it doesnt matter if it's an old
word 03 document, a copy'ed/paste'd text, or completely new text in a
new document. When printing, it miniaturizes it.
Unfurtunately this completely rules out using the word 07 beta in my
daily work - a darn shame because the UI seems very easy to use,
which i had looked forward to.

Anyone else have that printing problem or a solution to it?

I'm sorry this thread appears to have stopped because I'm having exactly the
same problem on my Epson Stylus Photo R300. Did anyone come up with a
solution or do I have to stop using the beta?

"isthis" wrote:

When printing in Word 2007 beta, the text gets miniaturized up into the left
corner. (on a HP PSC1315) it doesnt matter if it's an old word 03 document, a
copy'ed/paste'd text, or completely new text in a new document. When
printing, it miniaturizes it.
Unfurtunately this completely rules out using the word 07 beta in my daily
work - a darn shame because the UI seems very easy to use, which i had looked
forward to.

Anyone else have that printing problem or a solution to it?

Well, it IS a beta, and it would appear that support for some printers is
less good than for others. I would imagine that initial efforts might have
been more heavily focused on document printers (LaserJets, for example) than
on photo printers.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"redvalentine68" wrote in message
...
I'm sorry this thread appears to have stopped because I'm having exactly
the
same problem on my Epson Stylus Photo R300. Did anyone come up with a
solution or do I have to stop using the beta?

"isthis" wrote:

When printing in Word 2007 beta, the text gets miniaturized up into the
left
corner. (on a HP PSC1315) it doesnt matter if it's an old word 03
document, a
copy'ed/paste'd text, or completely new text in a new document. When
printing, it miniaturizes it.
Unfurtunately this completely rules out using the word 07 beta in my
daily
work - a darn shame because the UI seems very easy to use, which i had
looked
forward to.

Anyone else have that printing problem or a solution to it?

[Alex Grey]

"Suzanne S. Barnhill" wrote:

Well, it IS a beta, and it would appear that support for some printers is
less good than for others. I would imagine that initial efforts might have
been more heavily focused on document printers (LaserJets, for example) than
on photo printers.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"redvalentine68" wrote in message
...
I'm sorry this thread appears to have stopped because I'm having exactly
the
same problem on my Epson Stylus Photo R300. Did anyone come up with a
solution or do I have to stop using the beta?

"isthis" wrote:

When printing in Word 2007 beta, the text gets miniaturized up into the
left
corner. (on a HP PSC1315) it doesnt matter if it's an old word 03
document, a
copy'ed/paste'd text, or completely new text in a new document. When
printing, it miniaturizes it.
Unfurtunately this completely rules out using the word 07 beta in my
daily
work - a darn shame because the UI seems very easy to use, which i had
looked
forward to.

Anyone else have that printing problem or a solution to it?

[Alex Grey]

I observe the same problems when I try to print on printer Epson Stylus 1290
in a mode of high quality, however in a mode of high speed the work passes
normally. Also normally prints on printer HP LaserJet 1300.

"Suzanne S. Barnhill" wrote:

Well, it IS a beta, and it would appear that support for some printers is
less good than for others. I would imagine that initial efforts might have
been more heavily focused on document printers (LaserJets, for example) than
on photo printers.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"redvalentine68" wrote in message
...
I'm sorry this thread appears to have stopped because I'm having exactly
the
same problem on my Epson Stylus Photo R300. Did anyone come up with a
solution or do I have to stop using the beta?

"isthis" wrote:

When printing in Word 2007 beta, the text gets miniaturized up into the
left
corner. (on a HP PSC1315) it doesnt matter if it's an old word 03
document, a
copy'ed/paste'd text, or completely new text in a new document. When
printing, it miniaturizes it.
Unfurtunately this completely rules out using the word 07 beta in my
daily
work - a darn shame because the UI seems very easy to use, which i had
looked
forward to.

Anyone else have that printing problem or a solution to it?

[Suzanne S. Barnhill]

Many users are reporting that switching from Draft to high-resolution output
causes this problem. It seems to have been established that if you change
the printer setting in the printer Properties *before* starting Word, you
will not encounter the problem.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Alex Grey" wrote in message
...

I observe the same problems when I try to print on printer Epson Stylus
1290
in a mode of high quality, however in a mode of high speed the work passes
normally. Also normally prints on printer HP LaserJet 1300.

"Suzanne S. Barnhill" wrote:

Well, it IS a beta, and it would appear that support for some printers
is
less good than for others. I would imagine that initial efforts might
have
been more heavily focused on document printers (LaserJets, for example)
than
on photo printers.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so
all may benefit.

"redvalentine68" wrote in
message
...
I'm sorry this thread appears to have stopped because I'm having
exactly
the
same problem on my Epson Stylus Photo R300. Did anyone come up with a
solution or do I have to stop using the beta?

"isthis" wrote:

When printing in Word 2007 beta, the text gets miniaturized up into
the
left
corner. (on a HP PSC1315) it doesnt matter if it's an old word 03
document, a
copy'ed/paste'd text, or completely new text in a new document. When
printing, it miniaturizes it.
Unfurtunately this completely rules out using the word 07 beta in my
daily
work - a darn shame because the UI seems very easy to use, which i
had
looked
forward to.

Anyone else have that printing problem or a solution to it?

[Alex Grey]

Thanks, it works right.

"Suzanne S. Barnhill" wrote:

Many users are reporting that switching from Draft to high-resolution output
causes this problem. It seems to have been established that if you change
the printer setting in the printer Properties *before* starting Word, you
will not encounter the problem.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the newsgroup so
all may benefit.

"Alex Grey" wrote in message
...

I observe the same problems when I try to print on printer Epson Stylus
1290
in a mode of high quality, however in a mode of high speed the work passes
normally. Also normally prints on printer HP LaserJet 1300.

"Suzanne S. Barnhill" wrote:

Well, it IS a beta, and it would appear that support for some printers
is
less good than for others. I would imagine that initial efforts might
have
been more heavily focused on document printers (LaserJets, for example)
than
on photo printers.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
Word MVP FAQ site: http://word.mvps.org
Email cannot be acknowledged; please post all follow-ups to the
newsgroup so
all may benefit.

"redvalentine68" wrote in
message
...
I'm sorry this thread appears to have stopped because I'm having
exactly
the
same problem on my Epson Stylus Photo R300. Did anyone come up with a
solution or do I have to stop using the beta?

"isthis" wrote:

When printing in Word 2007 beta, the text gets miniaturized up into
the
left
corner. (on a HP PSC1315) it doesnt matter if it's an old word 03
document, a
copy'ed/paste'd text, or completely new text in a new document. When
printing, it miniaturizes it.
Unfurtunately this completely rules out using the word 07 beta in my
daily
work - a darn shame because the UI seems very easy to use, which i
had
looked
forward to.

Anyone else have that printing problem or a solution to it?