#1   Report Post  
Aurora
 
Posts: n/a
Default Margins for Normal Style

I am using Word 2000

I have customized the "normal" style the way I want it
except for the margins. How do I change the margins on
this style? I like 1" side margins, not 1.25".

Aurora
  #2   Report Post  
LH
 
Posts: n/a
Default

Use instead the menu FILE PAGE SETUP to set overall margins.

It is possible to set the indents for a style in FORMAT PARAGRAPH
Thus if my Normal style has indents of 1" and my page margins are set
at 1.25", my normal paragraphs will actually appear to start at 2.25"
from the edge of the page.

If I know that the page margins are set at 1.25" I could set the Normal
paragrah to have indents set at "minus point 25 inches" (that appears
as -0.5") so that they start one inch from the page but I think you
will find that using FILE PAGE SETUP is the better way

  #3   Report Post  
Robert M. Franz (RMF)
 
Posts: n/a
Default

Hello Aurora

Aurora wrote:
I am using Word 2000

I have customized the "normal" style the way I want it
except for the margins. How do I change the margins on
this style? I like 1" side margins, not 1.25".


What you ask for is:

Format | Style ... chose "Normal" ... Format | Paragraph | Indent.

What you really might want to do is:

File | Page Setup and change the page margins (left and right).

Impossible to decide which would serve you better without knowing a bit
more.

Greetinx
Robert
--
/"\ ASCII Ribbon Campaign | MS
\ / | MVP
X Against HTML | for
/ \ in e-mail & news | Word
  #4   Report Post  
Aurora
 
Posts: n/a
Default

I did what you said and it changed the placement the
margin on the page. But when I go into page setup, it
still reads side margins of 1.25" If there any way to
change this default to 1" on both sides?

Aurora


-----Original Message-----
Use instead the menu FILE PAGE SETUP to set overall

margins.

It is possible to set the indents for a style in FORMAT

PARAGRAPH
Thus if my Normal style has indents of 1" and my page

margins are set
at 1.25", my normal paragraphs will actually appear to

start at 2.25"
from the edge of the page.

If I know that the page margins are set at 1.25" I could

set the Normal
paragrah to have indents set at "minus point 25 inches"

(that appears
as -0.5") so that they start one inch from the page but I

think you
will find that using FILE PAGE SETUP is the better way

.

  #5   Report Post  
Aurora
 
Posts: n/a
Default

I did change the indent. On the page it looks right, but
when I go into the page setup it still reads 1.25" for
both side margins. I simply want all of default pages to
start with 1" margins on both sides. I don't like having
my paper (screen) appear one way and the page setup to
tell me something different. I know that somewhere down
the line I will screw something up trying to make changes
in margins that don't agree. Isn't there a way to change
the default to 1" on both sides?

Aurora



-----Original Message-----
Hello Aurora

Aurora wrote:
I am using Word 2000

I have customized the "normal" style the way I want it
except for the margins. How do I change the margins on
this style? I like 1" side margins, not 1.25".


What you ask for is:

Format | Style ... chose "Normal" ... Format |

Paragraph | Indent.

What you really might want to do is:

File | Page Setup and change the page margins (left and

right).

Impossible to decide which would serve you better without

knowing a bit
more.

Greetinx
Robert
--
/"\ ASCII Ribbon Campaign | MS
\ / | MVP
X Against HTML | for
/ \ in e-mail & news | Word
.



  #6   Report Post  
Daiya Mitchell
 
Posts: n/a
Default

Don't change the indent. Set the indents to zero (except maybe a first line
indent). Then ignore the indents. To change the margins for the entire
document, use ONLY File | Page Setup. Click Default...to save it for new
documents.

Generally, you would only indent a style to make it different from the rest
of the document. For instance, a style for block quotations, which are
indented from the rest of the text, would require an indent on both sides.


On 5/6/05 11:10 AM, "Aurora" wrote:

I did change the indent. On the page it looks right, but
when I go into the page setup it still reads 1.25" for
both side margins. I simply want all of default pages to
start with 1" margins on both sides. I don't like having
my paper (screen) appear one way and the page setup to
tell me something different. I know that somewhere down
the line I will screw something up trying to make changes
in margins that don't agree. Isn't there a way to change
the default to 1" on both sides?

Aurora



-----Original Message-----
Hello Aurora

Aurora wrote:
I am using Word 2000

I have customized the "normal" style the way I want it
except for the margins. How do I change the margins on
this style? I like 1" side margins, not 1.25".


What you ask for is:

Format | Style ... chose "Normal" ... Format |

Paragraph | Indent.

What you really might want to do is:

File | Page Setup and change the page margins (left and

right).

Impossible to decide which would serve you better without

knowing a bit
more.

Greetinx
Robert
--
/"\ ASCII Ribbon Campaign | MS
\ / | MVP
X Against HTML | for
/ \ in e-mail & news | Word
.



  #7   Report Post  
Graham Mayor
 
Posts: n/a
Default

There are two issues involved here
1. Page margins
This is the base margin setting of the underlying page and is set from file
page setup. Change the settings to what you require and click the default

button. SAVE NORMAL.DOT when prompted on exit.
2. Paragraph indents
You can set the left and right indents (or outdents) of any paragraph style
to override the page margin settings for that style. Rather than change the
indents for the normal paragraph style which can have knock on effects
elsewhere, create an indented paragraph style for use when such a layout is
required.

Such changes unless saved to normal.dot affect only the current document.
Changes saved to normal.dot apply to new documents.
If you cannot persuade the changes to stick, open normal.dot directly and
make the changes there.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org





Aurora wrote:
I did what you said and it changed the placement the
margin on the page. But when I go into page setup, it
still reads side margins of 1.25" If there any way to
change this default to 1" on both sides?

Aurora


-----Original Message-----
Use instead the menu FILE PAGE SETUP to set overall margins.

It is possible to set the indents for a style in FORMAT PARAGRAPH
Thus if my Normal style has indents of 1" and my page margins are set
at 1.25", my normal paragraphs will actually appear to start at 2.25"
from the edge of the page.

If I know that the page margins are set at 1.25" I could set the
Normal paragraph to have indents set at "minus point 25 inches" (that
appears as -0.5") so that they start one inch from the page but I
think you will find that using FILE PAGE SETUP is the better way

.



  #8   Report Post  
Aurora
 
Posts: n/a
Default

Thank you. When I went back to Page Setup, I saw the
default button. That worked. This exactly what I wanted.
Thank you so much. Aurora



-----Original Message-----
There are two issues involved here
1. Page margins
This is the base margin setting of the underlying page

and is set from file
page setup. Change the settings to what you require and

click the default
button. SAVE NORMAL.DOT when prompted on exit.
2. Paragraph indents
You can set the left and right indents (or outdents) of

any paragraph style
to override the page margin settings for that style.

Rather than change the
indents for the normal paragraph style which can have

knock on effects
elsewhere, create an indented paragraph style for use

when such a layout is
required.

Such changes unless saved to normal.dot affect only the

current document.
Changes saved to normal.dot apply to new documents.
If you cannot persuade the changes to stick, open

normal.dot directly and
make the changes there.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org





Aurora wrote:
I did what you said and it changed the placement the
margin on the page. But when I go into page setup, it
still reads side margins of 1.25" If there any way to
change this default to 1" on both sides?

Aurora


-----Original Message-----
Use instead the menu FILE PAGE SETUP to set overall

margins.

It is possible to set the indents for a style in

FORMAT PARAGRAPH
Thus if my Normal style has indents of 1" and my page

margins are set
at 1.25", my normal paragraphs will actually appear to

start at 2.25"
from the edge of the page.

If I know that the page margins are set at 1.25" I

could set the
Normal paragraph to have indents set at "minus point

25 inches" (that
appears as -0.5") so that they start one inch from the

page but I
think you will find that using FILE PAGE SETUP is

the better way

.



.

  #9   Report Post  
Graham Mayor
 
Posts: n/a
Default

You are welcome

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



Aurora wrote:
Thank you. When I went back to Page Setup, I saw the
default button. That worked. This exactly what I wanted.
Thank you so much. Aurora



-----Original Message-----
There are two issues involved here
1. Page margins
This is the base margin setting of the underlying page

and is set from file
page setup. Change the settings to what you require and

click the default
button. SAVE NORMAL.DOT when prompted on exit.
2. Paragraph indents
You can set the left and right indents (or outdents) of any
paragraph style to override the page margin settings for that style.
Rather than change the indents for the normal paragraph style which
can have knock on effects elsewhere, create an indented paragraph
style for use when such a layout is required.

Such changes unless saved to normal.dot affect only the current
document. Changes saved to normal.dot apply to new documents.
If you cannot persuade the changes to stick, open normal.dot
directly and make the changes there.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org





Aurora wrote:
I did what you said and it changed the placement the
margin on the page. But when I go into page setup, it
still reads side margins of 1.25" If there any way to
change this default to 1" on both sides?

Aurora


-----Original Message-----
Use instead the menu FILE PAGE SETUP to set overall margins.

It is possible to set the indents for a style in FORMAT PARAGRAPH
Thus if my Normal style has indents of 1" and my page margins are
set at 1.25", my normal paragraphs will actually appear to start
at 2.25" from the edge of the page.

If I know that the page margins are set at 1.25" I could set the
Normal paragraph to have indents set at "minus point 25 inches"
(that appears as -0.5") so that they start one inch from the page
but I think you will find that using FILE PAGE SETUP is the
better way

.



.



Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How do you end or "turn off" a character style while entering text Larry Root Microsoft Word Help 3 April 25th 05 03:29 PM
Word 2003: Can one disable table styles? [email protected] Tables 5 April 10th 05 10:02 AM
How to Avoid Word 2003 Table Style Problems Judy Haynes Tables 0 March 23rd 05 07:41 PM
Font properties of table styles versus paragraph styles Bob S Tables 3 February 8th 05 02:13 PM
Style bug for Tables? [email protected] Microsoft Word Help 5 January 21st 05 04:40 PM


All times are GMT +1. The time now is 12:47 PM.

Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Microsoft Office Word Forum - WordBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Word"