Home |
Search |
Today's Posts |
#1
Posted to microsoft.public.word.docmanagement,microsoft.public.word.newusers,microsoft.public.word.tables
|
|||
|
|||
Anyone know why this table is broken?
Anyone explain why this table is starting halfway down the page when it used
to start at the top? http://jethrouk.members.beeb.net/broken.doc This is constantly happening with my tables and it drives me insane and the only solution seems to be to re-write the whole 100 page document |
#2
Posted to microsoft.public.word.docmanagement,microsoft.public.word.newusers,microsoft.public.word.tables
|
|||
|
|||
Anyone know why this table is broken?
Right click the table and choose table properties. Under Text wrapping -
Around is selected. Click None and click Ok to have your table go back to the top. Probably what happened is that the table move handle (the little plus sign that appears to the upper left of the table corner) was dragged by accident... turning the table into a floating table. If you have occasionally used that as a short cut to select the table, you might want to stay away from it. One teeny drag can convert your table and you already know what a pain that is! (You said it was constantly happening to your tables...) Good luck with the other 100 pages... "JethroUK" wrote: Anyone explain why this table is starting halfway down the page when it used to start at the top? http://jethrouk.members.beeb.net/broken.doc This is constantly happening with my tables and it drives me insane and the only solution seems to be to re-write the whole 100 page document |
#3
Posted to microsoft.public.word.docmanagement,microsoft.public.word.newusers,microsoft.public.word.tables
|
|||
|
|||
Anyone know why this table is broken?
If you right-click on the Table and select Properties, click on the
Positioning Button and you will see that the Vertical Position is set to 28.12cm from the margin. Change it to TOP. Then remove the superfluous paragraph break in the middle that is splitting the table. But why is the table set to Wrap anyway? -- Terry Farrell - MSWord MVP "JethroUK" wrote in message ... Anyone explain why this table is starting halfway down the page when it used to start at the top? http://jethrouk.members.beeb.net/broken.doc This is constantly happening with my tables and it drives me insane and the only solution seems to be to re-write the whole 100 page document |
#4
Posted to microsoft.public.word.docmanagement,microsoft.public.word.newusers,microsoft.public.word.tables
|
|||
|
|||
Anyone know why this table is broken?
Cheers that fixed it & thanks for the tip - i don't usually use that anchor
to select the table but i prolly have done Just experimenting it seems the text-wrapping feature is restricted to the page (not the whole document) so i can still use text on pages above/below the table - is that right? "BoniM" wrote in message ... Right click the table and choose table properties. Under Text wrapping - Around is selected. Click None and click Ok to have your table go back to the top. Probably what happened is that the table move handle (the little plus sign that appears to the upper left of the table corner) was dragged by accident... turning the table into a floating table. If you have occasionally used that as a short cut to select the table, you might want to stay away from it. One teeny drag can convert your table and you already know what a pain that is! (You said it was constantly happening to your tables...) Good luck with the other 100 pages... "JethroUK" wrote: Anyone explain why this table is starting halfway down the page when it used to start at the top? http://jethrouk.members.beeb.net/broken.doc This is constantly happening with my tables and it drives me insane and the only solution seems to be to re-write the whole 100 page document |
#5
Posted to microsoft.public.word.docmanagement,microsoft.public.word.newusers,microsoft.public.word.tables
|
|||
|
|||
Anyone know why this table is broken?
Thanks that works fine too
It's like BoniM mentioned - the slightest nudge on the table anchor point and it makes the position fixed - this has happened to me dozens of times and not knowing that tables can be 'positioned', i've ended up creating a brand new document and pain-stakingly copy/pasting everything into it - maybe there should be a pop-up to tell you when this happens I'm not sure what you mean by why the table is set to wrap - can you explain? - i use tables all the time & it might be something else that's been tormenting me "Terry Farrell" wrote in message ... If you right-click on the Table and select Properties, click on the Positioning Button and you will see that the Vertical Position is set to 28.12cm from the margin. Change it to TOP. Then remove the superfluous paragraph break in the middle that is splitting the table. But why is the table set to Wrap anyway? -- Terry Farrell - MSWord MVP "JethroUK" wrote in message ... Anyone explain why this table is starting halfway down the page when it used to start at the top? http://jethrouk.members.beeb.net/broken.doc This is constantly happening with my tables and it drives me insane and the only solution seems to be to re-write the whole 100 page document |
#6
Posted to microsoft.public.word.docmanagement,microsoft.public.word.newusers,microsoft.public.word.tables
|
|||
|
|||
Anyone know why this table is broken?
If you right-click in the Table and select Table Properties, you will see
that the table Text Wrapping is set to AROUND. If you clear that by checking the NONE option and the table will also start behaving correctly again. Terry "JethroUK" wrote in message ... Thanks that works fine too It's like BoniM mentioned - the slightest nudge on the table anchor point and it makes the position fixed - this has happened to me dozens of times and not knowing that tables can be 'positioned', i've ended up creating a brand new document and pain-stakingly copy/pasting everything into it - maybe there should be a pop-up to tell you when this happens I'm not sure what you mean by why the table is set to wrap - can you explain? - i use tables all the time & it might be something else that's been tormenting me "Terry Farrell" wrote in message ... If you right-click on the Table and select Properties, click on the Positioning Button and you will see that the Vertical Position is set to 28.12cm from the margin. Change it to TOP. Then remove the superfluous paragraph break in the middle that is splitting the table. But why is the table set to Wrap anyway? -- Terry Farrell - MSWord MVP "JethroUK" wrote in message ... Anyone explain why this table is starting halfway down the page when it used to start at the top? http://jethrouk.members.beeb.net/broken.doc This is constantly happening with my tables and it drives me insane and the only solution seems to be to re-write the whole 100 page document |
#7
Posted to microsoft.public.word.docmanagement,microsoft.public.word.newusers,microsoft.public.word.tables
|
|||
|
|||
Anyone know why this table is broken?
Right... by default text will appear above and below, you only use wrap if
you want regular text to appear beside a table. "JethroUK" wrote: Cheers that fixed it & thanks for the tip - i don't usually use that anchor to select the table but i prolly have done Just experimenting it seems the text-wrapping feature is restricted to the page (not the whole document) so i can still use text on pages above/below the table - is that right? "BoniM" wrote in message ... Right click the table and choose table properties. Under Text wrapping - Around is selected. Click None and click Ok to have your table go back to the top. Probably what happened is that the table move handle (the little plus sign that appears to the upper left of the table corner) was dragged by accident... turning the table into a floating table. If you have occasionally used that as a short cut to select the table, you might want to stay away from it. One teeny drag can convert your table and you already know what a pain that is! (You said it was constantly happening to your tables...) Good luck with the other 100 pages... "JethroUK" wrote: Anyone explain why this table is starting halfway down the page when it used to start at the top? http://jethrouk.members.beeb.net/broken.doc This is constantly happening with my tables and it drives me insane and the only solution seems to be to re-write the whole 100 page document |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Anyone know why this table is broken? | Microsoft Word Help | |||
Anyone know why this table is broken? | New Users | |||
Table Row is broken to multiple pages (1 row = 1 page) | Tables | |||
How do I add a space at the beginning of a broken table on nextpg | Tables | |||
broken table between 2 pages | Tables |