Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to microsoft.public.word.newusers
SlickRCBD SlickRCBD is offline
external usenet poster
 
Posts: 14
Default help with full screen mode in Word07

I'm taking a night school course to get a higher degree. In class
today, the school had upgraded the computer in the classroom to Word
2007. I had been asked to help scroll a document on the screen while
the teacher was talking as she showed us various mistakes past
students had made on papers.
The problem was that not everything she wanted on screen was page-
alligned. In Word 2003 this wasn't a problem, as it defaulted to
something similar to the mode you had it in.
Not so in Word 2007. Instead, it acted more like the more recent
versions of Adobe Acrobat Reader ( 4) and would only display a page
at a time.

Is there any way to get the full screen mode to behave like the older
versions of Word? I could use full-screen mode to get the menus and
formatting controls out of the way while showing continuous pages in
Word 97 and 2003, but I can't figure out how to do this in Word 2007.

I'm trying to get something like "single page-continuous" in Acrobat,
or the "normal" "print view", or "web view" in Word 2003 that lets me
display the end of one page and the beginning of the next on the
screen at the same time while in full-screen mode as it did in the
previous versions.

So, how do I accomplish that, or did they force you to display only
one page at a time in the new, "improved" version?

I apologize for not using any new terminology, but here at home my
trial version of Office 2007 expired, and I simply replaced it with
Office 2003 from my previous computer.
  #2   Report Post  
Posted to microsoft.public.word.newusers
Graham Mayor Graham Mayor is offline
external usenet poster
 
Posts: 19,312
Default help with full screen mode in Word07

Try print layout view and double click one of the tabs to minimize the
ribbon.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org



"SlickRCBD" wrote in message
...
I'm taking a night school course to get a higher degree. In class
today, the school had upgraded the computer in the classroom to Word
2007. I had been asked to help scroll a document on the screen while
the teacher was talking as she showed us various mistakes past
students had made on papers.
The problem was that not everything she wanted on screen was page-
alligned. In Word 2003 this wasn't a problem, as it defaulted to
something similar to the mode you had it in.
Not so in Word 2007. Instead, it acted more like the more recent
versions of Adobe Acrobat Reader ( 4) and would only display a page
at a time.

Is there any way to get the full screen mode to behave like the older
versions of Word? I could use full-screen mode to get the menus and
formatting controls out of the way while showing continuous pages in
Word 97 and 2003, but I can't figure out how to do this in Word 2007.

I'm trying to get something like "single page-continuous" in Acrobat,
or the "normal" "print view", or "web view" in Word 2003 that lets me
display the end of one page and the beginning of the next on the
screen at the same time while in full-screen mode as it did in the
previous versions.

So, how do I accomplish that, or did they force you to display only
one page at a time in the new, "improved" version?

I apologize for not using any new terminology, but here at home my
trial version of Office 2007 expired, and I simply replaced it with
Office 2003 from my previous computer.



  #3   Report Post  
Posted to microsoft.public.word.newusers
Terry Farrell Terry Farrell is offline
external usenet poster
 
Posts: 2,904
Default help with full screen mode in Word07

I expect what you need now is Full Screen Reading View. If you look at the
icons to the right end of the Status Bar, it is the second View button. In
FSR view, you will get an arrow along the top of the screen for turning
pages.

If that doesn't work out for you, you can minimise the ribbon the ribbon by
double-clicking any of the Tabs or use Ctrl+F1 (do the same to toggle them
back into view). You can also move the Quick Access Toolbar to above the
Ribbon by right-click and select that option: this will give you a little
more vertical room for your display.

Finally, you can change the zoom level using the commands on the Status Bar.

--
Terry Farrell - MSWord MVP

"SlickRCBD" wrote in message
...
I'm taking a night school course to get a higher degree. In class
today, the school had upgraded the computer in the classroom to Word
2007. I had been asked to help scroll a document on the screen while
the teacher was talking as she showed us various mistakes past
students had made on papers.
The problem was that not everything she wanted on screen was page-
alligned. In Word 2003 this wasn't a problem, as it defaulted to
something similar to the mode you had it in.
Not so in Word 2007. Instead, it acted more like the more recent
versions of Adobe Acrobat Reader ( 4) and would only display a page
at a time.

Is there any way to get the full screen mode to behave like the older
versions of Word? I could use full-screen mode to get the menus and
formatting controls out of the way while showing continuous pages in
Word 97 and 2003, but I can't figure out how to do this in Word 2007.

I'm trying to get something like "single page-continuous" in Acrobat,
or the "normal" "print view", or "web view" in Word 2003 that lets me
display the end of one page and the beginning of the next on the
screen at the same time while in full-screen mode as it did in the
previous versions.

So, how do I accomplish that, or did they force you to display only
one page at a time in the new, "improved" version?

I apologize for not using any new terminology, but here at home my
trial version of Office 2007 expired, and I simply replaced it with
Office 2003 from my previous computer.


  #4   Report Post  
Posted to microsoft.public.word.newusers
Suzanne S. Barnhill Suzanne S. Barnhill is offline
external usenet poster
 
Posts: 33,624
Default help with full screen mode in Word07

And hiding the white space between pages also helps in this sort of
situation.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
http://word.mvps.org

"Terry Farrell" wrote in message
...
I expect what you need now is Full Screen Reading View. If you look at the
icons to the right end of the Status Bar, it is the second View button. In
FSR view, you will get an arrow along the top of the screen for turning
pages.

If that doesn't work out for you, you can minimise the ribbon the ribbon
by double-clicking any of the Tabs or use Ctrl+F1 (do the same to toggle
them back into view). You can also move the Quick Access Toolbar to above
the Ribbon by right-click and select that option: this will give you a
little more vertical room for your display.

Finally, you can change the zoom level using the commands on the Status
Bar.

--
Terry Farrell - MSWord MVP

"SlickRCBD" wrote in message
...
I'm taking a night school course to get a higher degree. In class
today, the school had upgraded the computer in the classroom to Word
2007. I had been asked to help scroll a document on the screen while
the teacher was talking as she showed us various mistakes past
students had made on papers.
The problem was that not everything she wanted on screen was page-
alligned. In Word 2003 this wasn't a problem, as it defaulted to
something similar to the mode you had it in.
Not so in Word 2007. Instead, it acted more like the more recent
versions of Adobe Acrobat Reader ( 4) and would only display a page
at a time.

Is there any way to get the full screen mode to behave like the older
versions of Word? I could use full-screen mode to get the menus and
formatting controls out of the way while showing continuous pages in
Word 97 and 2003, but I can't figure out how to do this in Word 2007.

I'm trying to get something like "single page-continuous" in Acrobat,
or the "normal" "print view", or "web view" in Word 2003 that lets me
display the end of one page and the beginning of the next on the
screen at the same time while in full-screen mode as it did in the
previous versions.

So, how do I accomplish that, or did they force you to display only
one page at a time in the new, "improved" version?

I apologize for not using any new terminology, but here at home my
trial version of Office 2007 expired, and I simply replaced it with
Office 2003 from my previous computer.




  #5   Report Post  
Posted to microsoft.public.word.newusers
SlickRCBD SlickRCBD is offline
external usenet poster
 
Posts: 14
Default help with full screen mode in Word07

In this "full screen reading view", can I display a paragraph on the
screen that has half the sentences at the bottom of page 2 and the
other half of the sentences at the top of page 3?

It was child's play in Word 2003.

That's really what I'm trying to accomplish, while minimizing the
amount of screen real estate junked up by the ribbon and other
controls. Heck, that was the main reason it wasn't done in a
PowerPoint.


The problem is that I can't try any suggestions until Monday as I
don't have Office 2007 at home, unless there's a way to reinstall the
(expired) trial version without disrupting my current install of
Office 2003 under Vista 64. I don't have anything to install it with
either.
On Feb 3, 5:52 am, "Terry Farrell" wrote:
I expect what you need now is Full Screen Reading View. If you look at the
icons to the right end of the Status Bar, it is the second View button. In
FSR view, you will get an arrow along the top of the screen for turning
pages.

If that doesn't work out for you, you can minimise the ribbon the ribbon by
double-clicking any of the Tabs or use Ctrl+F1 (do the same to toggle them
back into view). You can also move the Quick Access Toolbar to above the
Ribbon by right-click and select that option: this will give you a little
more vertical room for your display.

Finally, you can change the zoom level using the commands on the Status Bar.

--
Terry Farrell - MSWord MVP

"SlickRCBD" wrote in message

...

I'm taking a night school course to get a higher degree. In class
today, the school had upgraded the computer in the classroom to Word
2007. I had been asked to help scroll a document on the screen while
the teacher was talking as she showed us various mistakes past
students had made on papers.
The problem was that not everything she wanted on screen was page-
alligned. In Word 2003 this wasn't a problem, as it defaulted to
something similar to the mode you had it in.
Not so in Word 2007. Instead, it acted more like the more recent
versions of Adobe Acrobat Reader ( 4) and would only display a page
at a time.


Is there any way to get the full screen mode to behave like the older
versions of Word? I could use full-screen mode to get the menus and
formatting controls out of the way while showing continuous pages in
Word 97 and 2003, but I can't figure out how to do this in Word 2007.


I'm trying to get something like "single page-continuous" in Acrobat,
or the "normal" "print view", or "web view" in Word 2003 that lets me
display the end of one page and the beginning of the next on the
screen at the same time while in full-screen mode as it did in the
previous versions.


So, how do I accomplish that, or did they force you to display only
one page at a time in the new, "improved" version?


I apologize for not using any new terminology, but here at home my
trial version of Office 2007 expired, and I simply replaced it with
Office 2003 from my previous computer.




  #6   Report Post  
Posted to microsoft.public.word.newusers
Terry Farrell Terry Farrell is offline
external usenet poster
 
Posts: 2,904
Default help with full screen mode in Word07

In FSRV, you can display two full pages side-by-side.

Terry

"SlickRCBD" wrote in message
...
In this "full screen reading view", can I display a paragraph on the
screen that has half the sentences at the bottom of page 2 and the
other half of the sentences at the top of page 3?

It was child's play in Word 2003.

That's really what I'm trying to accomplish, while minimizing the
amount of screen real estate junked up by the ribbon and other
controls. Heck, that was the main reason it wasn't done in a
PowerPoint.


The problem is that I can't try any suggestions until Monday as I
don't have Office 2007 at home, unless there's a way to reinstall the
(expired) trial version without disrupting my current install of
Office 2003 under Vista 64. I don't have anything to install it with
either.
On Feb 3, 5:52 am, "Terry Farrell" wrote:
I expect what you need now is Full Screen Reading View. If you look at
the
icons to the right end of the Status Bar, it is the second View button.
In
FSR view, you will get an arrow along the top of the screen for turning
pages.

If that doesn't work out for you, you can minimise the ribbon the ribbon
by
double-clicking any of the Tabs or use Ctrl+F1 (do the same to toggle
them
back into view). You can also move the Quick Access Toolbar to above the
Ribbon by right-click and select that option: this will give you a little
more vertical room for your display.

Finally, you can change the zoom level using the commands on the Status
Bar.

--
Terry Farrell - MSWord MVP

"SlickRCBD" wrote in message

...

I'm taking a night school course to get a higher degree. In class
today, the school had upgraded the computer in the classroom to Word
2007. I had been asked to help scroll a document on the screen while
the teacher was talking as she showed us various mistakes past
students had made on papers.
The problem was that not everything she wanted on screen was page-
alligned. In Word 2003 this wasn't a problem, as it defaulted to
something similar to the mode you had it in.
Not so in Word 2007. Instead, it acted more like the more recent
versions of Adobe Acrobat Reader ( 4) and would only display a page
at a time.


Is there any way to get the full screen mode to behave like the older
versions of Word? I could use full-screen mode to get the menus and
formatting controls out of the way while showing continuous pages in
Word 97 and 2003, but I can't figure out how to do this in Word 2007.


I'm trying to get something like "single page-continuous" in Acrobat,
or the "normal" "print view", or "web view" in Word 2003 that lets me
display the end of one page and the beginning of the next on the
screen at the same time while in full-screen mode as it did in the
previous versions.


So, how do I accomplish that, or did they force you to display only
one page at a time in the new, "improved" version?


I apologize for not using any new terminology, but here at home my
trial version of Office 2007 expired, and I simply replaced it with
Office 2003 from my previous computer.


  #7   Report Post  
Posted to microsoft.public.word.newusers
Michael Funk Michael Funk is offline
external usenet poster
 
Posts: 1
Default kb shortcut

I cannot find a button for this function in Word 2010; however, the keyboard shortcut for "full-screen editing" mode still works.

Alt-V, then U.



SlickRCBD wrote:

help with full screen mode in Word07
03-Feb-10

I am taking a night school course to get a higher degree. In class
today, the school had upgraded the computer in the classroom to Word
2007. I had been asked to help scroll a document on the screen while
the teacher was talking as she showed us various mistakes past
students had made on papers.
The problem was that not everything she wanted on screen was page-
alligned. In Word 2003 this was not a problem, as it defaulted to
something similar to the mode you had it in.
Not so in Word 2007. Instead, it acted more like the more recent
versions of Adobe Acrobat Reader ( 4) and would only display a page
at a time.

Is there any way to get the full screen mode to behave like the older
versions of Word? I could use full-screen mode to get the menus and
formatting controls out of the way while showing continuous pages in
Word 97 and 2003, but I cannot figure out how to do this in Word 2007.

I am trying to get something like "single page-continuous" in Acrobat,
or the "normal" "print view", or "web view" in Word 2003 that lets me
display the end of one page and the beginning of the next on the
screen at the same time while in full-screen mode as it did in the
previous versions.

So, how do I accomplish that, or did they force you to display only
one page at a time in the new, "improved" version?

I apologize for not using any new terminology, but here at home my
trial version of Office 2007 expired, and I simply replaced it with
Office 2003 from my previous computer.

Previous Posts In This Thread:

On Wednesday, February 03, 2010 6:02 AM
SlickRCBD wrote:

help with full screen mode in Word07
I am taking a night school course to get a higher degree. In class
today, the school had upgraded the computer in the classroom to Word
2007. I had been asked to help scroll a document on the screen while
the teacher was talking as she showed us various mistakes past
students had made on papers.
The problem was that not everything she wanted on screen was page-
alligned. In Word 2003 this was not a problem, as it defaulted to
something similar to the mode you had it in.
Not so in Word 2007. Instead, it acted more like the more recent
versions of Adobe Acrobat Reader ( 4) and would only display a page
at a time.

Is there any way to get the full screen mode to behave like the older
versions of Word? I could use full-screen mode to get the menus and
formatting controls out of the way while showing continuous pages in
Word 97 and 2003, but I cannot figure out how to do this in Word 2007.

I am trying to get something like "single page-continuous" in Acrobat,
or the "normal" "print view", or "web view" in Word 2003 that lets me
display the end of one page and the beginning of the next on the
screen at the same time while in full-screen mode as it did in the
previous versions.

So, how do I accomplish that, or did they force you to display only
one page at a time in the new, "improved" version?

I apologize for not using any new terminology, but here at home my
trial version of Office 2007 expired, and I simply replaced it with
Office 2003 from my previous computer.

On Wednesday, February 03, 2010 6:48 AM
Graham Mayor wrote:

Try print layout view and double click one of the tabs to minimize theribbon.
Try print layout view and double click one of the tabs to minimize the
ribbon.

--

Graham Mayor - Word MVP

My web site www.gmayor.com
Word MVP web site http://word.mvps.org


On Wednesday, February 03, 2010 6:52 AM
Terry Farrell wrote:

I expect what you need now is Full Screen Reading View.
I expect what you need now is Full Screen Reading View. If you look at the
icons to the right end of the Status Bar, it is the second View button. In
FSR view, you will get an arrow along the top of the screen for turning
pages.

If that does not work out for you, you can minimise the ribbon the ribbon by
double-clicking any of the Tabs or use Ctrl+F1 (do the same to toggle them
back into view). You can also move the Quick Access Toolbar to above the
Ribbon by right-click and select that option: this will give you a little
more vertical room for your display.

Finally, you can change the zoom level using the commands on the Status Bar.

--
Terry Farrell - MSWord MVP

On Wednesday, February 03, 2010 9:02 AM
Suzanne S. Barnhill wrote:

And hiding the white space between pages also helps in this sort ofsituation.
And hiding the white space between pages also helps in this sort of
situation.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
http://word.mvps.org

On Friday, February 05, 2010 5:28 AM
SlickRCBD wrote:

In this "full screen reading view", can I display a paragraph on thescreen
In this "full screen reading view", can I display a paragraph on the
screen that has half the sentences at the bottom of page 2 and the
other half of the sentences at the top of page 3?

It was child's play in Word 2003.

That's really what I am trying to accomplish, while minimizing the
amount of screen real estate junked up by the ribbon and other
controls. Heck, that was the main reason it was not done in a
PowerPoint.


The problem is that I cannot try any suggestions until Monday as I
do not have Office 2007 at home, unless there is a way to reinstall the
(expired) trial version without disrupting my current install of
Office 2003 under Vista 64. I do not have anything to install it with
either.

On Friday, February 05, 2010 10:30 AM
Terry Farrell wrote:

In FSRV, you can display two full pages side-by-side.Terry
In FSRV, you can display two full pages side-by-side.

Terry


Submitted via EggHeadCafe - Software Developer Portal of Choice
Sending SMTP email from within BizTalk Orchestration
http://www.eggheadcafe.com/tutorials...il-from-w.aspx
Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
'Full Screen' Mode Stevo Microsoft Word Help 11 August 7th 09 03:34 AM
How to get Full Screen Mode in Word 2007 JohnnyC Page Layout 2 March 22nd 09 11:11 PM
full screen view for reading mode Henk Koning[_2_] Microsoft Word Help 1 January 30th 08 05:44 PM
How do I get scroll bar in full screen mode in Word? Naren Microsoft Word Help 2 March 17th 07 07:03 PM
e-mailing in full screen mode Slpelle2 Microsoft Word Help 4 August 12th 06 03:19 AM


All times are GMT +1. The time now is 06:23 AM.

Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Microsoft Office Word Forum - WordBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Word"