Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to microsoft.public.word.formatting.longdocs
[email protected] Gaston.Becerra@gmail.com is offline
external usenet poster
 
Posts: 3
Default landscape and portrait headers definition... in a blank template!

Hi,

I've been reading tons of tutorials and MVP's tips on how to work with
different header for portrait and landscape page setup (including
Shauna Kelly's biblical article about portrait page numbers in
landscape pages). However, it always seems to apply to normal
documents, but not to templates.
What if I want to create a blank template with headers for both
orientations?
Is it possible to change a portrait document to landscape, then to
portrait and then to landscape again and still getting the first
landscape header? Shouldn't this be part of a template definition?

Thanks in advanced for any idea you could spare!!

I also would like to sincerely thank those folks who generously use
their time to publish articles like Kelly's. I have learned to use
styles mainly thanks to these type of resources, and it has saved me a
lot of time.

Best,

Gaston
  #2   Report Post  
Posted to microsoft.public.word.formatting.longdocs
Stefan Blom Stefan Blom is offline
external usenet poster
 
Posts: 8,428
Default landscape and portrait headers definition... in a blank template!

Well, you can certainly insert section breaks in a template the same way you
do it in a document, and then format one section as landscape.

--
Stefan Blom
Microsoft Word MVP


wrote in message
...
Hi,

I've been reading tons of tutorials and MVP's tips on how to work with
different header for portrait and landscape page setup (including
Shauna Kelly's biblical article about portrait page numbers in
landscape pages). However, it always seems to apply to normal
documents, but not to templates.
What if I want to create a blank template with headers for both
orientations?
Is it possible to change a portrait document to landscape, then to
portrait and then to landscape again and still getting the first
landscape header? Shouldn't this be part of a template definition?

Thanks in advanced for any idea you could spare!!

I also would like to sincerely thank those folks who generously use
their time to publish articles like Kelly's. I have learned to use
styles mainly thanks to these type of resources, and it has saved me a
lot of time.

Best,

Gaston





  #3   Report Post  
Posted to microsoft.public.word.formatting.longdocs
Suzanne S. Barnhill Suzanne S. Barnhill is offline
external usenet poster
 
Posts: 33,624
Default landscape and portrait headers definition... in a blank template!

Without wanting in any way to detract from Shauna's priceless trove of
articles on styles, numbering, and other issues, if you are referring to
http://word.mvps.org/FAQs/Formatting...apeSection.htm, that article is
at the Word MVPs' FAQ site, not Shauna's.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

wrote in message
...
Hi,

I've been reading tons of tutorials and MVP's tips on how to work with
different header for portrait and landscape page setup (including
Shauna Kelly's biblical article about portrait page numbers in
landscape pages). However, it always seems to apply to normal
documents, but not to templates.
What if I want to create a blank template with headers for both
orientations?
Is it possible to change a portrait document to landscape, then to
portrait and then to landscape again and still getting the first
landscape header? Shouldn't this be part of a template definition?

Thanks in advanced for any idea you could spare!!

I also would like to sincerely thank those folks who generously use
their time to publish articles like Kelly's. I have learned to use
styles mainly thanks to these type of resources, and it has saved me a
lot of time.

Best,

Gaston



  #4   Report Post  
Posted to microsoft.public.word.formatting.longdocs
[email protected] Gaston.Becerra@gmail.com is offline
external usenet poster
 
Posts: 3
Default landscape and portrait headers definition... in a blank template!

Suzanne, yes, i was referring to that article... i read 200 tutorials
(including yours), i've must mixed them up in my mind...

Regarding Stefan's comment, I have done that... I've created the
template with the sections and 2 blank pages (in both orientations) as
placeholders. But what if I want to create a template without those
place holders? Specifically I want to know if, in order to provide a
template with a defined header for the landscape page, is it necessary
to incorporate a landscape page, or if there is a way to include that
information without placing a landscape page on the template.
Does it make any sense?

  #5   Report Post  
Posted to microsoft.public.word.formatting.longdocs
Suzanne S. Barnhill Suzanne S. Barnhill is offline
external usenet poster
 
Posts: 33,624
Default landscape and portrait headers definition... in a blank template!

Word can remember up to three headers/footers per section: First Page, Odd
(or primary), and Even. But it remembers only the ones that are in the page
orientation of a given section, so without section breaks, no I don't think
you could have those headers as an *original* part of the template, but you
could certainly save them as AutoText entries in the Header or Footer style,
and they would be available on the AutoText menu on the Header and Footer
toolbar.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

wrote in message
...
Suzanne, yes, i was referring to that article... i read 200 tutorials
(including yours), i've must mixed them up in my mind...

Regarding Stefan's comment, I have done that... I've created the
template with the sections and 2 blank pages (in both orientations) as
placeholders. But what if I want to create a template without those
place holders? Specifically I want to know if, in order to provide a
template with a defined header for the landscape page, is it necessary
to incorporate a landscape page, or if there is a way to include that
information without placing a landscape page on the template.
Does it make any sense?






  #6   Report Post  
Posted to microsoft.public.word.formatting.longdocs
[email protected] Gaston.Becerra@gmail.com is offline
external usenet poster
 
Posts: 3
Default landscape and portrait headers definition... in a blank template!

I will definitively look into that. Thanks a lot for your time!
  #7   Report Post  
Posted to microsoft.public.word.formatting.longdocs
Stefan Blom Stefan Blom is offline
external usenet poster
 
Posts: 8,428
Default landscape and portrait headers definition... in a blank template!

That is a good idea. It woold still be necessary to insert the landscape
section manually, of course (unless you are willing to include a section
break in the AutoText entry, which might be somewhat of an adventure).

--
Stefan Blom
Microsoft Word MVP


"Suzanne S. Barnhill" wrote in message
...
Word can remember up to three headers/footers per section: First Page, Odd
(or primary), and Even. But it remembers only the ones that are in the
page orientation of a given section, so without section breaks, no I don't
think you could have those headers as an *original* part of the template,
but you could certainly save them as AutoText entries in the Header or
Footer style, and they would be available on the AutoText menu on the
Header and Footer toolbar.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

wrote in message
...
Suzanne, yes, i was referring to that article... i read 200 tutorials
(including yours), i've must mixed them up in my mind...

Regarding Stefan's comment, I have done that... I've created the
template with the sections and 2 blank pages (in both orientations) as
placeholders. But what if I want to create a template without those
place holders? Specifically I want to know if, in order to provide a
template with a defined header for the landscape page, is it necessary
to incorporate a landscape page, or if there is a way to include that
information without placing a landscape page on the template.
Does it make any sense?






  #8   Report Post  
Posted to microsoft.public.word.formatting.longdocs
Stefan Blom Stefan Blom is offline
external usenet poster
 
Posts: 8,428
Default landscape and portrait headers definition... in a blank template!

"Stefan Blom" wrote in message
...
That is a good idea. It woold still be necessary to insert the landscape
section manually, of course (unless you are willing to include a section
break in the AutoText entry, which might be somewhat of an adventure).


Correction: (unless you are willing to include *two* section breaks in
the AutoText entry...)

--
Stefan Blom
Microsoft Word MVP





--
Stefan Blom
Microsoft Word MVP


"Suzanne S. Barnhill" wrote in message
...
Word can remember up to three headers/footers per section: First Page,
Odd (or primary), and Even. But it remembers only the ones that are in
the page orientation of a given section, so without section breaks, no I
don't think you could have those headers as an *original* part of the
template, but you could certainly save them as AutoText entries in the
Header or Footer style, and they would be available on the AutoText menu
on the Header and Footer toolbar.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

wrote in message
...
Suzanne, yes, i was referring to that article... i read 200 tutorials
(including yours), i've must mixed them up in my mind...

Regarding Stefan's comment, I have done that... I've created the
template with the sections and 2 blank pages (in both orientations) as
placeholders. But what if I want to create a template without those
place holders? Specifically I want to know if, in order to provide a
template with a defined header for the landscape page, is it necessary
to incorporate a landscape page, or if there is a way to include that
information without placing a landscape page on the template.
Does it make any sense?










  #9   Report Post  
Posted to microsoft.public.word.formatting.longdocs
Suzanne S. Barnhill Suzanne S. Barnhill is offline
external usenet poster
 
Posts: 33,624
Default landscape and portrait headers definition... in a blank template!

That's more of an adventure than I'd be up for!

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

"Stefan Blom" wrote in message
...
That is a good idea. It woold still be necessary to insert the landscape
section manually, of course (unless you are willing to include a section
break in the AutoText entry, which might be somewhat of an adventure).

--
Stefan Blom
Microsoft Word MVP


"Suzanne S. Barnhill" wrote in message
...
Word can remember up to three headers/footers per section: First Page,
Odd (or primary), and Even. But it remembers only the ones that are in
the page orientation of a given section, so without section breaks, no, I
don't think you could have those headers as an *original* part of the
template, but you could certainly save them as AutoText entries in the
Header or Footer style, and they would be available on the AutoText menu
on the Header and Footer toolbar.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

wrote in message
...
Suzanne, yes, i was referring to that article... i read 200 tutorials
(including yours), i've must mixed them up in my mind...

Regarding Stefan's comment, I have done that... I've created the
template with the sections and 2 blank pages (in both orientations) as
placeholders. But what if I want to create a template without those
place holders? Specifically I want to know if, in order to provide a
template with a defined header for the landscape page, is it necessary
to incorporate a landscape page, or if there is a way to include that
information without placing a landscape page on the template.
Does it make any sense?









Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
portrait headers/footers in landscape documents Julie Page Layout 1 November 22nd 07 03:36 AM
Portrait and Landscape Headers and Footers BekkiM Microsoft Word Help 5 January 18th 06 09:25 PM
headers change when changing from portrait to landscape dup Microsoft Word Help 2 January 5th 06 02:22 AM
Position Headers to Portrait when page is Landscape staceyb0711 Page Layout 2 November 11th 05 12:33 AM
Headers, footers used on portrait and landscape pages in same docu Sue T. Microsoft Word Help 2 February 1st 05 12:08 AM


All times are GMT +1. The time now is 03:15 PM.

Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Microsoft Office Word Forum - WordBanter.
The comments are property of their posters.
 

About Us

"It's about Microsoft Word"