[Warren]

Hello,

I am using Word 2000 and I am not able to set the default font to Arial.
When ever I try it changes back to what it was previously. I tried it on to
different computer and it did not work on either. I change to Arial (W1) or
Helvetica depending on the computer. I was reading about Acrobat 7 causing a
problem and that suggestion did not work.
Any other suggestions?

Thank you,
Warren

[Stefan Blom]

How are you setting the default font? Note that when you click the
Default button in the Font dialog box, the modification is applied to
the Normal style of the current document and its template; other
documents or templates will not be affected.

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Hello,

I am using Word 2000 and I am not able to set the default font to
Arial.
When ever I try it changes back to what it was previously. I tried it
on to
different computer and it did not work on either. I change to Arial
(W1) or
Helvetica depending on the computer. I was reading about Acrobat 7
causing a
problem and that suggestion did not work.
Any other suggestions?

Thank you,
Warren

[Warren]

Hello,

Thank you for you quick response Stefan.
I am holding down the Shift key clicking on File Save All and saving it as a
..dot file. What I have noticed is that I can set the Arial font as a default,
close the font windows go back in and it will have gone back to Arial(W1) or
Helvetica. It does not matter if I save the document or not. I have tried to
make the changes save the document and go back into the same document and it
will still be Arial(W1) or Helvetica?
Something else that is strange is that when I change the font on the page
from Helvetica or Arial(W1) to Arial it will still say that it is still
Helvetica or Arial(W1). If I change to another font type it will show as the
correct font execpt for Arial. Arial will also show as Helvetica or Arial
(W1)?

"Stefan Blom" wrote:

How are you setting the default font? Note that when you click the
Default button in the Font dialog box, the modification is applied to
the Normal style of the current document and its template; other
documents or templates will not be affected.

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Hello,

I am using Word 2000 and I am not able to set the default font to
Arial.
When ever I try it changes back to what it was previously. I tried it
on to
different computer and it did not work on either. I change to Arial
(W1) or
Helvetica depending on the computer. I was reading about Acrobat 7
causing a
problem and that suggestion did not work.
Any other suggestions?

Thank you,
Warren

[Stefan Blom]

Are you sure that the Arial font file still exists in the Fonts folder
in Windows?

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Hello,

Thank you for you quick response Stefan.
I am holding down the Shift key clicking on File Save All and saving
it as a
.dot file. What I have noticed is that I can set the Arial font as a
default,
close the font windows go back in and it will have gone back to
Arial(W1) or
Helvetica. It does not matter if I save the document or not. I have
tried to
make the changes save the document and go back into the same document
and it
will still be Arial(W1) or Helvetica?
Something else that is strange is that when I change the font on the
page
from Helvetica or Arial(W1) to Arial it will still say that it is
still
Helvetica or Arial(W1). If I change to another font type it will show
as the
correct font execpt for Arial. Arial will also show as Helvetica or
Arial
(W1)?

"Stefan Blom" wrote:

How are you setting the default font? Note that when you click the
Default button in the Font dialog box, the modification is applied
to
the Normal style of the current document and its template; other
documents or templates will not be affected.

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Hello,

I am using Word 2000 and I am not able to set the default font to
Arial.
When ever I try it changes back to what it was previously. I tried
it
on to
different computer and it did not work on either. I change to
Arial
(W1) or
Helvetica depending on the computer. I was reading about Acrobat 7
causing a
problem and that suggestion did not work.
Any other suggestions?

Thank you,
Warren

[Warren]

Yes I have checked and it is still there on both computers? The one computer
does not have Helvetica in the fonts folder but it keeps coming up?

"Stefan Blom" wrote:

Are you sure that the Arial font file still exists in the Fonts folder
in Windows?

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Hello,

Thank you for you quick response Stefan.
I am holding down the Shift key clicking on File Save All and saving
it as a
.dot file. What I have noticed is that I can set the Arial font as a
default,
close the font windows go back in and it will have gone back to
Arial(W1) or
Helvetica. It does not matter if I save the document or not. I have
tried to
make the changes save the document and go back into the same document
and it
will still be Arial(W1) or Helvetica?
Something else that is strange is that when I change the font on the
page
from Helvetica or Arial(W1) to Arial it will still say that it is
still
Helvetica or Arial(W1). If I change to another font type it will show
as the
correct font execpt for Arial. Arial will also show as Helvetica or
Arial
(W1)?

"Stefan Blom" wrote:

How are you setting the default font? Note that when you click the
Default button in the Font dialog box, the modification is applied
to
the Normal style of the current document and its template; other
documents or templates will not be affected.

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Hello,

I am using Word 2000 and I am not able to set the default font to
Arial.
When ever I try it changes back to what it was previously. I tried
it
on to
different computer and it did not work on either. I change to
Arial
(W1) or
Helvetica depending on the computer. I was reading about Acrobat 7
causing a
problem and that suggestion did not work.
Any other suggestions?

Thank you,
Warren

[Stefan Blom]

What happens if you click the Font Substitution button on the
Compatibility tab of Tools | Options?

Are both computers using the same printer?

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Yes I have checked and it is still there on both computers? The one
computer
does not have Helvetica in the fonts folder but it keeps coming up?

"Stefan Blom" wrote:

Are you sure that the Arial font file still exists in the Fonts
folder
in Windows?

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Hello,

Thank you for you quick response Stefan.
I am holding down the Shift key clicking on File Save All and
saving
it as a
.dot file. What I have noticed is that I can set the Arial font as
a
default,
close the font windows go back in and it will have gone back to
Arial(W1) or
Helvetica. It does not matter if I save the document or not. I
have
tried to
make the changes save the document and go back into the same
document
and it
will still be Arial(W1) or Helvetica?
Something else that is strange is that when I change the font on
the
page
from Helvetica or Arial(W1) to Arial it will still say that it is
still
Helvetica or Arial(W1). If I change to another font type it will
show
as the
correct font execpt for Arial. Arial will also show as Helvetica
or
Arial
(W1)?

"Stefan Blom" wrote:

How are you setting the default font? Note that when you click
the
Default button in the Font dialog box, the modification is
applied
to
the Normal style of the current document and its template; other
documents or templates will not be affected.

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Hello,

I am using Word 2000 and I am not able to set the default font
to
Arial.
When ever I try it changes back to what it was previously. I
tried
it
on to
different computer and it did not work on either. I change to
Arial
(W1) or
Helvetica depending on the computer. I was reading about
Acrobat 7
causing a
problem and that suggestion did not work.
Any other suggestions?

Thank you,
Warren

[Warren]

One computer is connected to a Dell 5200 and the other is connected to a HP
4200. When I click on the font substitution button in a blank document I can
a error message saying that I already have the fonts. If I click on the font
substitution button in the document I am having trouble with, nothing happens?

"Stefan Blom" wrote:

What happens if you click the Font Substitution button on the
Compatibility tab of Tools | Options?

Are both computers using the same printer?

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Yes I have checked and it is still there on both computers? The one
computer
does not have Helvetica in the fonts folder but it keeps coming up?

"Stefan Blom" wrote:

Are you sure that the Arial font file still exists in the Fonts
folder
in Windows?

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Hello,

Thank you for you quick response Stefan.
I am holding down the Shift key clicking on File Save All and
saving
it as a
.dot file. What I have noticed is that I can set the Arial font as
a
default,
close the font windows go back in and it will have gone back to
Arial(W1) or
Helvetica. It does not matter if I save the document or not. I
have
tried to
make the changes save the document and go back into the same
document
and it
will still be Arial(W1) or Helvetica?
Something else that is strange is that when I change the font on
the
page
from Helvetica or Arial(W1) to Arial it will still say that it is
still
Helvetica or Arial(W1). If I change to another font type it will
show
as the
correct font execpt for Arial. Arial will also show as Helvetica
or
Arial
(W1)?

"Stefan Blom" wrote:

How are you setting the default font? Note that when you click
the
Default button in the Font dialog box, the modification is
applied
to
the Normal style of the current document and its template; other
documents or templates will not be affected.

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Hello,

I am using Word 2000 and I am not able to set the default font
to
Arial.
When ever I try it changes back to what it was previously. I
tried
it
on to
different computer and it did not work on either. I change to
Arial
(W1) or
Helvetica depending on the computer. I was reading about
Acrobat 7
causing a
problem and that suggestion did not work.
Any other suggestions?

Thank you,
Warren

[Stefan Blom]

I'm certainly no expert on printers, but I suspect this means that the
*printer* is substituting fonts. Can you find anything in the printer
options (accessed via Control Panel) that could possibly be causing the
issue?

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
One computer is connected to a Dell 5200 and the other is connected to
a HP
4200. When I click on the font substitution button in a blank document
I can
a error message saying that I already have the fonts. If I click on
the font
substitution button in the document I am having trouble with, nothing
happens?

"Stefan Blom" wrote:

What happens if you click the Font Substitution button on the
Compatibility tab of Tools | Options?

Are both computers using the same printer?

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Yes I have checked and it is still there on both computers? The
one
computer
does not have Helvetica in the fonts folder but it keeps coming
up?

"Stefan Blom" wrote:

Are you sure that the Arial font file still exists in the Fonts
folder
in Windows?

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Hello,

Thank you for you quick response Stefan.
I am holding down the Shift key clicking on File Save All and
saving
it as a
.dot file. What I have noticed is that I can set the Arial
font as
a
default,
close the font windows go back in and it will have gone back
to
Arial(W1) or
Helvetica. It does not matter if I save the document or not. I
have
tried to
make the changes save the document and go back into the same
document
and it
will still be Arial(W1) or Helvetica?
Something else that is strange is that when I change the font
on
the
page
from Helvetica or Arial(W1) to Arial it will still say that it
is
still
Helvetica or Arial(W1). If I change to another font type it
will
show
as the
correct font execpt for Arial. Arial will also show as
Helvetica
or
Arial
(W1)?

"Stefan Blom" wrote:

How are you setting the default font? Note that when you
click
the
Default button in the Font dialog box, the modification is
applied
to
the Normal style of the current document and its template;
other
documents or templates will not be affected.

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Hello,

I am using Word 2000 and I am not able to set the default
font
to
Arial.
When ever I try it changes back to what it was previously.
I
tried
it
on to
different computer and it did not work on either. I change
to
Arial
(W1) or
Helvetica depending on the computer. I was reading about
Acrobat 7
causing a
problem and that suggestion did not work.
Any other suggestions?

Thank you,
Warren

[Warren]

Thank you for your help. I did not go into the control panel of the printer
but I did setup as Xerox printer as my default and that solved that problem.
It is something with the Dell and the HP.

"Stefan Blom" wrote:

I'm certainly no expert on printers, but I suspect this means that the
*printer* is substituting fonts. Can you find anything in the printer
options (accessed via Control Panel) that could possibly be causing the
issue?

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
One computer is connected to a Dell 5200 and the other is connected to
a HP
4200. When I click on the font substitution button in a blank document
I can
a error message saying that I already have the fonts. If I click on
the font
substitution button in the document I am having trouble with, nothing
happens?

"Stefan Blom" wrote:

What happens if you click the Font Substitution button on the
Compatibility tab of Tools | Options?

Are both computers using the same printer?

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Yes I have checked and it is still there on both computers? The
one
computer
does not have Helvetica in the fonts folder but it keeps coming
up?

"Stefan Blom" wrote:

Are you sure that the Arial font file still exists in the Fonts
folder
in Windows?

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Hello,

Thank you for you quick response Stefan.
I am holding down the Shift key clicking on File Save All and
saving
it as a
.dot file. What I have noticed is that I can set the Arial
font as
a
default,
close the font windows go back in and it will have gone back
to
Arial(W1) or
Helvetica. It does not matter if I save the document or not. I
have
tried to
make the changes save the document and go back into the same
document
and it
will still be Arial(W1) or Helvetica?
Something else that is strange is that when I change the font
on
the
page
from Helvetica or Arial(W1) to Arial it will still say that it
is
still
Helvetica or Arial(W1). If I change to another font type it
will
show
as the
correct font execpt for Arial. Arial will also show as
Helvetica
or
Arial
(W1)?

"Stefan Blom" wrote:

How are you setting the default font? Note that when you
click
the
Default button in the Font dialog box, the modification is
applied
to
the Normal style of the current document and its template;
other
documents or templates will not be affected.

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Hello,

I am using Word 2000 and I am not able to set the default
font
to
Arial.
When ever I try it changes back to what it was previously.
I
tried
it
on to
different computer and it did not work on either. I change
to
Arial
(W1) or
Helvetica depending on the computer. I was reading about
Acrobat 7
causing a
problem and that suggestion did not work.
Any other suggestions?

Thank you,
Warren

[Stefan Blom]

I'm glad you got it sorted!

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Thank you for your help. I did not go into the control panel of the
printer
but I did setup as Xerox printer as my default and that solved that
problem.
It is something with the Dell and the HP.

"Stefan Blom" wrote:

I'm certainly no expert on printers, but I suspect this means that
the
*printer* is substituting fonts. Can you find anything in the
printer
options (accessed via Control Panel) that could possibly be causing
the
issue?

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
One computer is connected to a Dell 5200 and the other is
connected to
a HP
4200. When I click on the font substitution button in a blank
document
I can
a error message saying that I already have the fonts. If I click
on
the font
substitution button in the document I am having trouble with,
nothing
happens?

"Stefan Blom" wrote:

What happens if you click the Font Substitution button on the
Compatibility tab of Tools | Options?

Are both computers using the same printer?

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Yes I have checked and it is still there on both computers?
The
one
computer
does not have Helvetica in the fonts folder but it keeps
coming
up?

"Stefan Blom" wrote:

Are you sure that the Arial font file still exists in the
Fonts
folder
in Windows?

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message
...
Hello,

Thank you for you quick response Stefan.
I am holding down the Shift key clicking on File Save All
and
saving
it as a
.dot file. What I have noticed is that I can set the Arial
font as
a
default,
close the font windows go back in and it will have gone
back
to
Arial(W1) or
Helvetica. It does not matter if I save the document or
not. I
have
tried to
make the changes save the document and go back into the
same
document
and it
will still be Arial(W1) or Helvetica?
Something else that is strange is that when I change the
font
on
the
page
from Helvetica or Arial(W1) to Arial it will still say
that it
is
still
Helvetica or Arial(W1). If I change to another font type
it
will
show
as the
correct font execpt for Arial. Arial will also show as
Helvetica
or
Arial
(W1)?

"Stefan Blom" wrote:

How are you setting the default font? Note that when you
click
the
Default button in the Font dialog box, the modification
is
applied
to
the Normal style of the current document and its
template;
other
documents or templates will not be affected.

--
Stefan Blom
Microsoft Word MVP


"Warren" wrote in message

...
Hello,

I am using Word 2000 and I am not able to set the
default
font
to
Arial.
When ever I try it changes back to what it was
previously.
I
tried
it
on to
different computer and it did not work on either. I
change
to
Arial
(W1) or
Helvetica depending on the computer. I was reading
about
Acrobat 7
causing a
problem and that suggestion did not work.
Any other suggestions?

Thank you,
Warren